odin flash philz_touch_6.15.4-jflteatt.tar.md5 failing - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

for the life of me i can't get it to work. keeps failing. i've tried odin3 3.04, 3.06, 3.09 without success. both philz_touch_6.09 and philz_touch_6.15.4-jflteatt.tar.md5
att galaxy s4 i337 unrooted
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.15.4-jflteatt.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> recovery.img
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What is your bootloader version? If it is higher than MDL, I think you are out of luck.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Unsure. Can you tell from the following ??
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

egiblock said:
Unsure. Can you tell from the following ??
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Looks like you are on nb1. You can't use custom recovery. All you can do is downgrade to mk2 and use safestrap
Sent from my GT-I9505G using Tapatalk

well that isn't going to be much fun right now..
thanks for the info

Related

HELP PLEASE!!! firmware error

OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Sounds like a bad rom download. Download the rim again or get it from a sticky on xda.
Also it doesn't matter what com port Odin puts the phone on as long as it sees it.
Sent from my SPH-L720 using xda app-developers app
tordsrv 1892
im still fairly new at the whole rooting scene. could you possible link me to the stock rom? oh btw idk if this would matter but i think i had the MF9..
i just want to go back stock for now and get this phone to work.. than i will try again.. thank you in advance!
my uncle also said there is a odin file not the program. but an odin file that you use with odin program. is this true for the s4? if so could you link me to it also!
i just tried it again. and im getting this error now..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have read that that download fron QBKing is bad. As a poster above me said, download the rom from XDA instead and redo the process. Also, be sure to use the usb cable that came with your phone as others can cause the same issue. Also....if it fails again, try a different usb port. Good luck
Sent from my SPH-L720 using Tapatalk 4 Beta
could someone link me to the right post that has the sprint stock rom? thank you
texassoljaz said:
could someone link me to the right post that has the sprint stock rom? thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2382188
Last post
Sent from my SPH-L720 using xda premium
and ubuings
ok so.. i downloaded this stock firmware
http://forum.xda-developers.com/showthread.php?t=2258107
and it actually goes futher but than it said i dont have a pit file.. im sorry this is my first time and it is so hard to understand everything.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MF9FirmwareAIO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
could someone tell me wht it says no PIT partition? i have tried so many different stocks for the sprint phone.
im sure mines was the MF9. but i also tried the MDL and MDC.
texassoljaz said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MF9FirmwareAIO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
could someone tell me wht it says no PIT partition? i have tried so many different stocks for the sprint phone.
im sure mines was the MF9. but i also tried the MDL and MDC.
Click to expand...
Click to collapse
Bot trying to scare you here but if you google the pit error people are being told its a faulty motherboard
Sent from my SPH-L720 using xda premium
same thing happen to my boys gs2 when i was flashing a recovery for him... same ishh.. all i had to do is use odin to unroot and flash a stock rom via odin.. its worked for me.. all the phone would do is go into download mode.. thats it.. no recovery and it wouldnt boot.. stuck in download mode.. i plugged it in to my pc.. odin noticed the phone i flashed stock unrooted rom.. phone rebooted at the end and everything was fine..one crazy thing was after that happen i tried to root again and flash a custom recovery and it happen again.. so i had to fix it again.. i just could not root that phone after that.. had to keep it stock.. my buddy was just happy to have his phone he didnt care about root after that!!
texassoljaz said:
OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Click to expand...
Click to collapse
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I tried what you said than it went to this
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
but now i have a loading bar on my phone. so i dont know whats going to happen i will leave it for a while to see what happens.
texassoljaz said:
I tried what you said than it went to this
Added!!
Odin v.3 engine (ID:7)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Complete(Write) operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
but now i have a loading bar on my phone. so i dont know whats going to happen i will leave it for a while to see what happens.
Click to expand...
Click to collapse
Hmm weird. Redownload the file from qbking77 and delete the extension again. Also try it with a different version of odin for example the one that qbking uses v1.85 (which is also the one I use) and pull out battery and put the battery in and manually set it to download mode and try it one more time. Btw any chance did you get a pop up in your screen saying something about an error of some kind saying about a parameter before?
Edit: Also probably restart computer just in case also.
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
ROMANTiC KiD said:
Hmm weird. Redownload the file from qbking77 and delete the extension again. Also try it with a different version of odin for example the one that qbking uses v1.85 (which is also the one I use) and pull out battery and put the battery in and manually set it to download mode and try it one more time. Btw any chance did you get a pop up in your screen saying something about an error of some kind saying about a parameter before?
Edit: Also probably restart computer just in case also.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
no i never never got a parameter error.. i also have window 8 do you think that will affect anything? i will try qbking than update you.. thanks for helping. greatly appreciated!
texassoljaz said:
no i never never got a parameter error.. i also have window 8 do you think that will affect anything? i will try qbking than update you.. thanks for helping. greatly appreciated!
Click to expand...
Click to collapse
Hmm... alrighty. Nah it shouldnt affect anything but you can also try with other computer as well or different version of windows. No problem hope you get it solved soon!
Sent from my SPH-L720 using xda app-developers app
so after trying it. i got a parameter error. what does this mean?
so i end up getting this far.. do you know how to fix this?
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
i dont get it. so i got it to start the green bar in on odin.. than all of a sudden it say fails. and one my phone the blue bar went half way
yessss!!!!! i got

Having trouble trying to restore to Stock

When I try to flash the latest stock .md5 it always fails and on my device on download mode it says "Write Protection: Enable"
Any ideas
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Because MDC isn't close to the latest .tar for this phone. You have either MK2 or NAE on your phone and you cannot go back to a previous build. Odin one of those and you'll be fine.
Sent from my SPH-L720 using Tapatalk
frostedunit said:
Because MDC isn't close to the latest .tar for this phone. You have either MK2 or NAE on your phone and you cannot go back to a previous build. Odin one of those and you'll be fine.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Correct. All of this is getting really old and people need to search more and read. Plus download the latest tar files.
Sent from my SPH-L720 using Tapatalk
Thanks for the help. Will try. Sorry for being a noob lol:laugh:

[Q] How bad is my soft brick?

I have posted to this thread before and am very thankful for the help provided.
Now, I have been doing LOTS of reading on unbricking a soft bricked GS4 from AT&T but have no luck.
I have read that unbricking a soft bricked phone is usually a piece of cake, but I guess I'm just really unlucky :crying:
I have tried many methods, from wiping data in recovery, flashing stock roms, and so on, but haven't really succeeded with any method.
Just now, I wiped/formatted the cache and data in recovery one more time, made sure my battery was at 100%, and flashed a
stock firmware in Odin 3.09 using this guide: http://forum.xda-developers.com/showthread.php?t=2265477
The end result was as follows:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have no idea what I'm doing wrong. Can anyone tell from the messages above?
Thanks a lot for any help!​
Your phone is higher than the amdl bootloader. You will need to try the mk2 or higher tar package. I think they might be linked in the general section.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Red_81 said:
Your phone is higher than the amdl bootloader. You will need to try the mk2 or higher tar package. I think they might be linked in the general section.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So flashing an MK2 or NB1 tar in Odin should fix it?
Yep. Remember you will be back to full stock, no root.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

[q] i337 bootloader i9505 rom

When I go to ODIN mode my PRODUCT NAME IS I337. However when i go to the about section in settings it says I9505. The phone is from China and I have rooted it I want to install a rom on this (5.0 prefferably maybe stock). Please help out also when I try to OTA update it says AT&T and no new update while its on 4.3.
Please help
If its running a custom or none stock ROM the about section will show wrong. I would remove the battery see what it says and Odin that firmware from sammobile. Sounds like you have a i337 running international variant of the rom. If it does say i337 don't do anything above MDL.
n007w said:
When I go to ODIN mode my PRODUCT NAME IS I337. However when i go to the about section in settings it says I9505. The phone is from China and I have rooted it I want to install a rom on this (5.0 prefferably maybe stock). Please help out also when I try to OTA update it says AT&T and no new update while its on 4.3.
Please help
Click to expand...
Click to collapse
Whatever it says in download mode is probably true. Go to the system and install terminal emulator and type getprop ro.bootloader and reply with what it says (at least the last 3 characters)
DeadlySin9 said:
Whatever it says in download mode is probably true. Go to the system and install terminal emulator and type getprop ro.bootloader and reply with what it says (at least the last 3 characters)
Click to expand...
Click to collapse
bro I cant turn the phone on anymore when i turn it on it goes to SAMSUNG GALAXY S4 logo then turns off. I can get to download and stock recovery though. I done a /wipe data factory reset and /wipe cache partition. Could you please help me out maybe I can odin flash or..
BehrendsTech said:
If its running a custom or none stock ROM the about section will show wrong. I would remove the battery see what it says and Odin that firmware from sammobile. Sounds like you have a i337 running international variant of the rom. If it does say i337 don't do anything above MDL.
Click to expand...
Click to collapse
I cant turn it on now read my reply to another user please
n007w said:
I cant turn it on now read my reply to another user please
Click to expand...
Click to collapse
I'd say just find and flash the NB1 ODIN tar file from the general section then. Either find the thread for it or check the [INDEX] thread.
The boot loop is a soft brick most of the time you'll need to Odin it to get it to boot. I'd try MDL if it boot loops still that means your on a newer version you'll need to flash the newer tar file.
DeadlySin9 said:
I'd say just find and flash the NB1 ODIN tar file from the general section then. Either find the thread for it or check the [INDEX] thread.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
After Uninstalling Kies
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
n007w said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
After Uninstalling Kies
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks will I need a PIT
n007w said:
Thanks will I need a PIT
Click to expand...
Click to collapse
No. Just flash the .tar.md5 file in the AP slot.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I was on Jellybean before will it be ok to flash nb1. Also I am waiting for the download
n007w said:
I was on Jellybean before will it be ok to flash nb1. Also I am waiting for the download
Click to expand...
Click to collapse
Yes, it'll update the bootloader too but you can still root nb1 and you'll still need to use safestrap as your custom recovery so no harm will be done.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Yes, it'll update the bootloader too but you can still root nb1 and you'll still need to use safestrap as your custom recovery so no harm will be done.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man you are the best you know even Samsung couldnt fix it. I cant thank you enough but one more favour, how can I get it to 5.0 lollipop theres no OTA update.
n007w said:
Thanks man you are the best you know even Samsung couldnt fix it. I cant thank you enough but one more favour, how can I get it to 5.0 lollipop theres no OTA update.
Click to expand...
Click to collapse
Give it some time and it should ota. The otas roll out in cycles so it might even be a day or two.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Give it some time and it should ota. The otas roll out in cycles so it might even be a day or two.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am in the UK so I wont recieve an AT&T OTA so is there an Odin Flash for it
n007w said:
I am in the UK so I wont recieve an AT&T OTA so is there an Odin Flash for it
Click to expand...
Click to collapse
No, there is not at this point.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, there is not at this point.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Sincerely apologize for annoying you but can you give me a prediction of when it will be released.
n007w said:
Sincerely apologize for annoying you but can you give me a prediction of when it will be released.
Click to expand...
Click to collapse
I have no idea if our when it might be available. To can eye on this thread if it becomes available it'll be posted here, http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
Bro, please help I managed to get the software etc. Now it turns off randomly sometimes

Galaxy S5 G900A stock firmware Lollipop 5.0 downgrade to kitkat

Im in a bit of a dilemma. I bought a new s5 with lollipop already installed on it and decided to root it. To root i needed to downgrade it. So using Odin, i attempted a downgrade only to come to a FAIL conclusion. I tried different .tar files that were kit kat, also found rooted lollipop firmware which always failed. I tried using a pit file which didnt seem to help. I cleared the cached and wiped the system memory multiple times. The only screen i am able to see is the Downloading screen and the reboot screen (volume up, home, and power)
I guess i soft bricked my phone... is there anyway to fix this problem?
Thanks a lot
AT&T - Bootloader is locked, don't think there is any way to downgrade from Lollipop
*Detection* said:
AT&T - Bootloader is locked, don't think there is any way to downgrade from Lollipop
Click to expand...
Click to collapse
yea that i realized, but is there anyway to get my phone back to its original state? Or because the bootloader is locked, this phone is forever soft bricked?
yakmicjan said:
yea that i realized, but is there anyway to get my phone back to its original state? Or because the bootloader is locked, this phone is forever soft bricked?
Click to expand...
Click to collapse
Boot in download mode then flash a LP firmware with odin
Sent from my SM-G900F using XDA Free mobile app
Soufiansky said:
Boot in download mode then flash a LP firmware with odin
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
I'm sorry what is LP firmware? If you mean stock, then I've already tried a lollipop firmware download with Odin which also always kept failing
yakmicjan said:
I'm sorry what is LP firmware? If you mean stock, then I've already tried a lollipop firmware download with Odin which also always kept failing
Click to expand...
Click to collapse
Yeah "LP" mean lollipop. Which fail message do you get ?
Sent from my SM-G900F using XDA Free mobile app
Soufiansky said:
Yeah "LP" mean lollipop. Which fail message do you get ?
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
First off, i used a few different update files. I'll just list the errors i get with each of them if that makes a difference:
*****
G900AUCU3BOC4_OneClick.exe (Can't add a pit file into this... it's a custom ODIN
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> One Click Downloader Mode
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005>
<ID:0/005>
<OSM> All threads completed. (succeed 0 / failed 1)
*****
Both of these files get the same error
AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
AND
G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 (added a pit file : SM-G900A_pit.pit)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In addition, i also tried to update the phone through an sd card using the file G900A-OF3toOI5-ota-2400258.cfg and renaming it to update.zip. Through the recovery menu, i wiped cache partition and did a factory reset. Then I applyed the update from external storage and get an Error Status 7.
This is everything i tried. Im running out of ideas and getting frustrated as this is a brand new phone
@yakmicjan But why are you using a modded version of odin ? Use a normal one , took the last version , then go to sammobile donwload the last firmware for your phone. Extract it and flash it with odin. It should work
Don't flash any pit file with it or anything , just the firmware.
Sent from my SM-G900F using XDA Free mobile app
I downloaded so many different types of odins and tried these files on all of them. The only modded version of odin is on the .exe file. I tried Odin3 v1.85, 3.10.6, 3.09. All of them gave me the same exact message.
Sadly, on sam mobile, the very last version they have for SM G900A is 4.4.2 which doesnt help since my phone already had lollipop installed on it. Does this mean i have to wait until they get a lollipop firmware for me to use my phone?
yakmicjan said:
I downloaded so many different types of odins and tried these files on all of them. The only modded version of odin is on the .exe file. I tried Odin3 v1.85, 3.10.6, 3.09. All of them gave me the same exact message.
Click to expand...
Click to collapse
Wait i just saw "Re-partion failed" , was it ticked before the flash ? Make sure only auto reboot and Reset time are ticked.
Sent from my SM-G900F using XDA Free mobile app
yakmicjan said:
This is everything i tried. Im running out of ideas and getting frustrated as this is a brand new phone
Click to expand...
Click to collapse
That's why you spend time reading and learning before just jumping in without knowing anything
Send it back, hope that they fix it under warranty
Soufiansky said:
Wait i just saw "Re-partion failed" , was it ticked before the flash ?
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
No it wasnt. I only have Auto Reboot and F.Reset Time ticked
Here is another error i'm getting. This time i added an AP, CP, and CSC file
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G900AATT1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
yakmicjan said:
Here is another error i'm getting. This time i added an AP, CP, and CSC file
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G900AATT1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Why do you add PIT FILE ? DO NOT DO IT. Flash only the firmware with Re-partition unchecked
Sent from my SM-G900F using XDA Free mobile app
Soufiansky said:
Why do you add PIT FILE ? DO NOT DO IT. Flash only the firmware with Re-partition unchecked
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Im not adding the Pit File at all. I dont know why it shows up. I'll attach proof.
By the way, its the same exact error message as above.
Im so sorry about this annoying problem and for me being such a bother. Thank you so much for trying to help me
Why are you adding anything other than just the ROM in AP?
Remove everything from ODIN, and only add the ROM in AP
yakmicjan said:
Im not adding the Pit File at all. I dont know why it shows up. I'll attach proof.
By the way, its the same exact error message as above.
Click to expand...
Click to collapse
Look , choose ONLY the rom which is a very big .tar file and put it in AP , that's it. Do not add anything , anything. The firmware is about 2.4/2.5 go , you flash it and that's it
Sent from my SM-G900F using XDA Free mobile app
Soufiansky said:
Look , choose ONLY the rom which is a very big .tar file and put it in AP , that's it. Do not add anything , anything. The firmware is about 2.4/2.5 go , you flash it and that's it
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
What i am using now is the firmware i got from Sam's. I also tried checking and unchecking F. Reset Time. It gave me the same results
Same problem:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Categories

Resources