When I go to ODIN mode my PRODUCT NAME IS I337. However when i go to the about section in settings it says I9505. The phone is from China and I have rooted it I want to install a rom on this (5.0 prefferably maybe stock). Please help out also when I try to OTA update it says AT&T and no new update while its on 4.3.
Please help
If its running a custom or none stock ROM the about section will show wrong. I would remove the battery see what it says and Odin that firmware from sammobile. Sounds like you have a i337 running international variant of the rom. If it does say i337 don't do anything above MDL.
n007w said:
When I go to ODIN mode my PRODUCT NAME IS I337. However when i go to the about section in settings it says I9505. The phone is from China and I have rooted it I want to install a rom on this (5.0 prefferably maybe stock). Please help out also when I try to OTA update it says AT&T and no new update while its on 4.3.
Please help
Click to expand...
Click to collapse
Whatever it says in download mode is probably true. Go to the system and install terminal emulator and type getprop ro.bootloader and reply with what it says (at least the last 3 characters)
DeadlySin9 said:
Whatever it says in download mode is probably true. Go to the system and install terminal emulator and type getprop ro.bootloader and reply with what it says (at least the last 3 characters)
Click to expand...
Click to collapse
bro I cant turn the phone on anymore when i turn it on it goes to SAMSUNG GALAXY S4 logo then turns off. I can get to download and stock recovery though. I done a /wipe data factory reset and /wipe cache partition. Could you please help me out maybe I can odin flash or..
BehrendsTech said:
If its running a custom or none stock ROM the about section will show wrong. I would remove the battery see what it says and Odin that firmware from sammobile. Sounds like you have a i337 running international variant of the rom. If it does say i337 don't do anything above MDL.
Click to expand...
Click to collapse
I cant turn it on now read my reply to another user please
n007w said:
I cant turn it on now read my reply to another user please
Click to expand...
Click to collapse
I'd say just find and flash the NB1 ODIN tar file from the general section then. Either find the thread for it or check the [INDEX] thread.
The boot loop is a soft brick most of the time you'll need to Odin it to get it to boot. I'd try MDL if it boot loops still that means your on a newer version you'll need to flash the newer tar file.
DeadlySin9 said:
I'd say just find and flash the NB1 ODIN tar file from the general section then. Either find the thread for it or check the [INDEX] thread.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
After Uninstalling Kies
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
n007w said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
After Uninstalling Kies
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks will I need a PIT
n007w said:
Thanks will I need a PIT
Click to expand...
Click to collapse
No. Just flash the .tar.md5 file in the AP slot.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I was on Jellybean before will it be ok to flash nb1. Also I am waiting for the download
n007w said:
I was on Jellybean before will it be ok to flash nb1. Also I am waiting for the download
Click to expand...
Click to collapse
Yes, it'll update the bootloader too but you can still root nb1 and you'll still need to use safestrap as your custom recovery so no harm will be done.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Yes, it'll update the bootloader too but you can still root nb1 and you'll still need to use safestrap as your custom recovery so no harm will be done.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man you are the best you know even Samsung couldnt fix it. I cant thank you enough but one more favour, how can I get it to 5.0 lollipop theres no OTA update.
n007w said:
Thanks man you are the best you know even Samsung couldnt fix it. I cant thank you enough but one more favour, how can I get it to 5.0 lollipop theres no OTA update.
Click to expand...
Click to collapse
Give it some time and it should ota. The otas roll out in cycles so it might even be a day or two.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Give it some time and it should ota. The otas roll out in cycles so it might even be a day or two.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am in the UK so I wont recieve an AT&T OTA so is there an Odin Flash for it
n007w said:
I am in the UK so I wont recieve an AT&T OTA so is there an Odin Flash for it
Click to expand...
Click to collapse
No, there is not at this point.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, there is not at this point.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Sincerely apologize for annoying you but can you give me a prediction of when it will be released.
n007w said:
Sincerely apologize for annoying you but can you give me a prediction of when it will be released.
Click to expand...
Click to collapse
I have no idea if our when it might be available. To can eye on this thread if it becomes available it'll be posted here, http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
Bro, please help I managed to get the software etc. Now it turns off randomly sometimes
Related
When I try to flash the latest stock .md5 it always fails and on my device on download mode it says "Write Protection: Enable"
Any ideas
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Because MDC isn't close to the latest .tar for this phone. You have either MK2 or NAE on your phone and you cannot go back to a previous build. Odin one of those and you'll be fine.
Sent from my SPH-L720 using Tapatalk
frostedunit said:
Because MDC isn't close to the latest .tar for this phone. You have either MK2 or NAE on your phone and you cannot go back to a previous build. Odin one of those and you'll be fine.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Correct. All of this is getting really old and people need to search more and read. Plus download the latest tar files.
Sent from my SPH-L720 using Tapatalk
Thanks for the help. Will try. Sorry for being a noob lol:laugh:
I have posted to this thread before and am very thankful for the help provided.
Now, I have been doing LOTS of reading on unbricking a soft bricked GS4 from AT&T but have no luck.
I have read that unbricking a soft bricked phone is usually a piece of cake, but I guess I'm just really unlucky :crying:
I have tried many methods, from wiping data in recovery, flashing stock roms, and so on, but haven't really succeeded with any method.
Just now, I wiped/formatted the cache and data in recovery one more time, made sure my battery was at 100%, and flashed a
stock firmware in Odin 3.09 using this guide: http://forum.xda-developers.com/showthread.php?t=2265477
The end result was as follows:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have no idea what I'm doing wrong. Can anyone tell from the messages above?
Thanks a lot for any help!
Your phone is higher than the amdl bootloader. You will need to try the mk2 or higher tar package. I think they might be linked in the general section.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Red_81 said:
Your phone is higher than the amdl bootloader. You will need to try the mk2 or higher tar package. I think they might be linked in the general section.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So flashing an MK2 or NB1 tar in Odin should fix it?
Yep. Remember you will be back to full stock, no root.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Hello I have an Att Samsung Galaxy s4 SGH-I337 running 4.3 Jellybean. I have had it rooted but something went wrong when trying to flash a custom rom. I got it stuck in download mode and it took me a while to get it out. I had to do several battery pulls when it finally booted I unrooted the phone and it works normal. Except when trying to install a new update it tries to reboot but goes into download mode. So i try to boot into recovery and can only get it into recovery mode. I have no idea what I have done and I have tried to use kies and odin to no success odin just gives me an error. thank you for your help
What error do you see with Odin? What file are you trying to flash?
I try to flash back to original firmware using sammobile.com/firmwares/1/ and when I try to use odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you for your help
mm99baller said:
I try to flash back to original firmware using sammobile.com/firmwares/1/ and when I try to use odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you for your help
Click to expand...
Click to collapse
It appears that you are flashing the MDL firmware. I took is as your phone has MDL firmware.
I used to have MDL phone and it went to boot-loop due to my error in flashing a custom rom.
I used that MDL firmware to flash but it failed. So I used MDB files to flash and it went through. My phone booted as MDB phone. That was my experience with that MDL file.
thank you for your reply I had the MDB file as well and just tried again. It gave me the same error as before.
mm99baller said:
thank you for your reply I had the MDB file as well and just tried again. It gave me the same error as before.
Click to expand...
Click to collapse
You started from 4.3 so you need to flash the same version. Use the MK2 ODIN files.
Sent from my SGH-I337 running GPE
Hellos,
I'm noob and recently rooted and installed a custom recovery my S4 in attempt to install Cyanogenmod. This was after the last update by At&t and the bootloader doesnt let the recovery (TWRP) boot. This was before I heard that Att added a boot loader. I have tried many methods to return to stock but all have failed because of the bootloader. Any way to remove and return to stock or perhaps unlock the bootloader?
I tried Odin with the correct firmware I needed. This is what I got.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MUMUFNE3_I337MPCTFNF1_I337MUMUFNE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can Anyone help?
If you have an AT&T i337 then Odin the nb1 tar file. See this http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
If you have an AT&T i337 then Odin the nb1 tar file. See this http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for being a noob but which one should I follow if I want to revert to factory? I have NL1.
systemglytch said:
Sorry for being a noob but which one should I follow if I want to revert to factory? I have NL1.
Click to expand...
Click to collapse
You need to flash the nb1 tar. Either is ok. Then ota back to nl1
Sent from my Nexus 9 using XDA Free mobile app
I have a galaxy S6 Edge which you could probably tell from the model number and I recently rooted it. After realizing that my phone was very very sluggish after the root, I decided to unroot it. I have the proper stock firmware for my device downloaded on my computer (Lollipop 5.1.1) but when I tried to flash it manually through Odin I received this error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU2BOH1_G925PSPT2BOH1_G925PVPU2BOH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was surprised to find that this flash wasn't successful because I've flashed this firmware on the phone multiple times with ease. After looking around on google for quite some time, I haven't yet found a solution witch is the reason why I am writing this post. I am not sure how to fix this error and would really appreciate some help. Thanks
This is the file I downloaded from SamMobile's website:
sammobile.com/firmwares/database/SM-G925P/
This is a screenshot of the Odin after running the flash:
prntscr.com/8mpeso
Emadness said:
I have a galaxy S6 Edge which you could probably tell from the model number and I recently rooted it. After realizing that my phone was very very sluggish after the root, I decided to unroot it. I have the proper stock firmware for my device downloaded on my computer (Lollipop 5.1.1) but when I tried to flash it manually through Odin I received this error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU2BOH1_G925PSPT2BOH1_G925PVPU2BOH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was surprised to find that this flash wasn't successful because I've flashed this firmware on the phone multiple times with ease. After looking around on google for quite some time, I haven't yet found a solution witch is the reason why I am writing this post. I am not sure how to fix this error and would really appreciate some help. Thanks
This is the file I downloaded from SamMobile's website:
sammobile.com/firmwares/database/SM-G925P/
This is a screenshot of the Odin after running the flash:
prntscr.com/8mpeso
Click to expand...
Click to collapse
For a start it may help posting in the correct forum lol. This is the edge+ forum for G928 models.
Sent from my SM-G928F using Tapatalk
tatoo069sv said:
For a start it may help posting in the correct forum lol. This is the edge+ forum for G928 models.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Hahaha my bad. I'm a newbie to xda forums >.<
Emadness said:
Hahaha my bad. I'm a newbie to xda forums >.<
Click to expand...
Click to collapse
Hey no worries mate. I just didn't want you waiting for an answer and not getting it because the readers don't use your model [emoji6]
Sent from my SM-G928F using Tapatalk
Make sure that you are in fact using the same carrier and model firmware as your phone.
Also maybe @Misterjunky can help