Sorry guys but i've been trawling through all the stuff on here and can't make headway with all the mass of info.
I have an unrooted Note 3 on O2:
AP: N9005XXUBMJ1
CP: N9005XXUBMJ1
CSC: N9005O2UBMHD
Software update on the phone is saying its the latest version but obviously the sim free guys are way higher now.
Having loads of trouble with poor signal/dropping wifi etc and I don't want to wait for O2 to pull their fingers out and release their version.
I would like to remove the O2 firmware branding and restore to the latest MJ7. I just don't know the best way to go about this (obviously preferring not to trip knox) Hear loads about keeping the old baseband but then radios/modems need updating...oh i don't know.
Anyone kind enough to do a step by step I would be so grateful.
Thanks :good:
After a day with no signal i'm getting desperate lol
Related
Hello, I'm new so, thankyou for your help...
I'm in this situation...
AP: I9505XXUAME2
CP: I9505XXUAME2
CSC: I9505OXXAMDB
kernel 3.4.0-431985 Pre-rooted
with binary=official, counter=0
but unfortunately
status=personal (I don't know why)
I would install the full version of the last kernel following this thread
http://forum.xda-developers.com/show....php?t=2250824
but I see two different versions...
- Pre-rooted
- Unbranded
and
- Pre-rooted
- Unbranded
- DEODEXED
I should have the first situation...
but I've many doubts
1) Is the status=personal a problem? I've tried with the standard updates but obviously they don' work....
2) I've a 64GB SD that works fine...If I go with the new version, I loose the compliancy?
3) Does the procedure erase the data? Or is it just and update?
Sorry for the long thread,
thankyou vm...I really appreciate all the clarifications...It's just my first Android Phone!
H.
Hello,
I need to ask if There is any possibility to remove branded applications, and general system
three.uk operator, so that seemed normal as the normal S4.
I bought a phone with root, so this is not necessary, but I'm not sure if it's somehow going to make
and do not know how. TouchWiz does not bother me so or if there is a original samsung rom.
Thank you very much for your answers and advice
Tel Version * # 1234 #
AP: i9505xxubmea
cp: i9505xxuamdc
csc: i9505h3gbme3
You can Flash with the BTU version of XXUBMGA and keep a pre Knox version of 4.2.2 If you want 4.3 you can Flash with a Knox version of the BTU Rom on XXUEMJ7. If you want 4.3 pre Knox you will have to read the forums to find the best option for you. Both of these options definitely work on a 3UK i9505 Galaxy S4
Sent from my GT-I9505 using Tapatalk
Hi everyone,
first of all i hope it`s not a double thread, I could not find any BTU discussion of 4.3.
I`m getting really lost in this OTA / Kies compatibility over here..
My S4 was rooted now I`m trying to restore it to official state to make it OTA update compatible again.
The phone was bought in UK, GSM phone.
There was a matching firmware, which should be compatible for updates here, but i keep getting the same "Your firmware is not supported..." error message again and again.
Details:
AP: I9505XXUEMJ7
CP: I9505XXUEMJ7
CSC: I9505BTUEMJ8
Current binary: Samsung Official
System status: Official
Later on 2nd try:
AP: I9505XXUEMJ7
CP: I9505XXUEMJ8
CSC: I9505BTUEMJ8
Current binary: Samsung Official
System status: Official
So far after trying to help my problem with Google all I got, that I9505XXUEMJ7+I9505XXUEMJ7+I9505BTUEMJ8 is the latest official state and BTU is for the UK.
If someone could explain what is wrong here, I would be very happy.
Thanks.
Thread says the same, that I`m using the correct version
http://forum.xda-developers.com/showthread.php?t=2265477
Is my question so stupid or is it an unique problem that I have so no one will reply?
Maybe I'm missing something here but have you reverted to stock, stock recovery and Triangle Away first. You cannot receive OTA updates or Kies if your device is rooted or has a custom recovery etc...
Yes, Triangle away done, stock rom, stock recovery.
Cool, is BTU the correct firmware for you? Are you on a different carrier there? Can you flash the stock ROM you want through ODIN? (gotta run for lunch but I'm sure someone better than I will help)
restock
put phone into download mode
open kies select firmware upgrade initialisation
enter model number and serial number in capitals
make sure both are correct you can find it on the box or under the battery.
Thanks everyone, I`m gonna do it all over again this evening. BTU is correct for me, its unbranded gsm unlocked phone from UK.
Edit: Boring day in job here.. redone the whole thing and it works now.
Thank you everyone, again.
Hi All,
Ive searched and searched and cant find anything, i have just acquired a SGS4, I9505.
First of all... you will need to know this:
AP: I9505XXUDMGG
CP: I9505XXUDMGG
CSC: I9505VFGDMG3
Im on a understanding that this is on Voda (UK) software, however the handset isnt locked to Vodafone. I recieved this second hand and have a Three network sim on it.
My question:
I see on Samsung-updates.com and SamMobile that there are loads of 4.3 software variants available to download and flash, would i specifically need to look for a MGG one? (If so i can only find 4.2.2 ones) or would any UK Variant work? I was wanting to try this before i think about Custom romming the handset. . . Also, if i am available to do this would it lock the phone to Vodafone (If the handset was ever unlocked before i got it)
Thanks in Advanced guys.
Rob
Good day, my I9505 won't update to 4.3 via OTA. Still stuck to 4.2.2
i dont know what's causing this problem. Im from south east asia and 4.3 update was released last year. checked my devices if it's rooted, installed root checker *deivice does not have proper root access*. How can i tell my device if it's rooted or not? Can you tell me what's causing this problem? Is it region locked? Newbie here.
Pls help! Thanks!
bogart26 said:
Good day, my I9505 won't update to 4.3 via OTA. Still stuck to 4.2.2
i dont know what's causing this problem. Im from south east asia and 4.3 update was released last year. checked my devices if it's rooted, installed root checker *deivice does not have proper root access*. How can i tell my device if it's rooted or not? Can you tell me what's causing this problem? Is it region locked? Newbie here.
Pls help! Thanks!
Click to expand...
Click to collapse
Try using Kies PC software to update. It will let you know if your phone has been modified and refuse to update
JohnnyInBriz said:
Try using Kies PC software to update. It will let you know if your phone has been modified and refuse to update
Click to expand...
Click to collapse
thanks for the reply. Used Kies and this message showed up " Your device's current firmware version is not supported to update firmrware via Kies" CURRENT FIRMWARE VERSION: PDA: MEA/ PHONE: MEA/ CSC: MEA(DBT)
searched the version of my phone here is the list:
AP: I9505XXUBMEA
CP: I9505XXUBMEA
CSC: I9505OXABMEA
my device status is Official...
is there any conflict on the version of my phone? actually Im the 2nd owner of the phone, don't know what the 1st owner did to it (modification or anything...) and where the phone came from. MANY THANKS!
i don't have any knowledge on rooting a phone.
bogart26 said:
thanks for the reply. Used Kies and this message showed up " Your device's current firmware version is not supported to update firmrware via Kies" CURRENT FIRMWARE VERSION: PDA: MEA/ PHONE: MEA/ CSC: MEA(DBT)
searched the version of my phone here is the list:
AP: I9505XXUBMEA
CP: I9505XXUBMEA
CSC: I9505OXABMEA
my device status is Official...
is there any conflict on the version of my phone? actually Im the 2nd owner of the phone, don't know what the 1st owner did to it (modification or anything...) and where the phone came from. MANY THANKS!
Click to expand...
Click to collapse
It came from germany so feel free to download the file from here ,But the best thing you can do is flash a pre-rooted 4.2.2 rom man then flash any 4.3 custom rom you like just to avoid that Knox Warranty Void , so incase you got a problem later you can just go back to 4.2.2 but this is up to you.
Repulsa said:
It came from germany
thanks! so if my phone came from Germany, there is no way I cant update my phone via OTA and Kies because now the phone is now in Philippines? pls enlighten me on this.
I have no knowledge on flashing nor rooting a phone, can you give me step by step instructions? or is there any other way to update my phone officially? (requires no rooting or flashing) THANKS!
Click to expand...
Click to collapse