Hi everyone,
first of all i hope it`s not a double thread, I could not find any BTU discussion of 4.3.
I`m getting really lost in this OTA / Kies compatibility over here..
My S4 was rooted now I`m trying to restore it to official state to make it OTA update compatible again.
The phone was bought in UK, GSM phone.
There was a matching firmware, which should be compatible for updates here, but i keep getting the same "Your firmware is not supported..." error message again and again.
Details:
AP: I9505XXUEMJ7
CP: I9505XXUEMJ7
CSC: I9505BTUEMJ8
Current binary: Samsung Official
System status: Official
Later on 2nd try:
AP: I9505XXUEMJ7
CP: I9505XXUEMJ8
CSC: I9505BTUEMJ8
Current binary: Samsung Official
System status: Official
So far after trying to help my problem with Google all I got, that I9505XXUEMJ7+I9505XXUEMJ7+I9505BTUEMJ8 is the latest official state and BTU is for the UK.
If someone could explain what is wrong here, I would be very happy.
Thanks.
Thread says the same, that I`m using the correct version
http://forum.xda-developers.com/showthread.php?t=2265477
Is my question so stupid or is it an unique problem that I have so no one will reply?
Maybe I'm missing something here but have you reverted to stock, stock recovery and Triangle Away first. You cannot receive OTA updates or Kies if your device is rooted or has a custom recovery etc...
Yes, Triangle away done, stock rom, stock recovery.
Cool, is BTU the correct firmware for you? Are you on a different carrier there? Can you flash the stock ROM you want through ODIN? (gotta run for lunch but I'm sure someone better than I will help)
restock
put phone into download mode
open kies select firmware upgrade initialisation
enter model number and serial number in capitals
make sure both are correct you can find it on the box or under the battery.
Thanks everyone, I`m gonna do it all over again this evening. BTU is correct for me, its unbranded gsm unlocked phone from UK.
Edit: Boring day in job here.. redone the whole thing and it works now.
Thank you everyone, again.
Related
Hi whats the difference between my unbranded I9505XXUAMDM and H3G-I9505XXUBMEA
thing is my phone not get latest update yet, its unbranded open firmware
and i can flash if to three UK H3G-I9505XXUBMEA
is it worth it? whats the difference between them
or i shoud just be patient and wait ..
is there latest unbranded out yet?
when they going to release update for unbranded phones ?
http://droidviews.com/2013/the-latest-xxubmea-firmware-update-for-galaxy-s4-gt-i9505-brings-major-improvements-features/
thx
GT-I9505
4.2.2
I9505XXUAMDM
I uploaded screenshot from about menu.
Phone region in Kies says BTU
There is a whole lengthy thread dedicated to UK firmware and discussion, all the information you could need or want is in there, if not, that would also be a good place to ask these kind of questions.
http://forum.xda-developers.com/showthread.php?t=2191766
Good day, my I9505 won't update to 4.3 via OTA. Still stuck to 4.2.2
i dont know what's causing this problem. Im from south east asia and 4.3 update was released last year. checked my devices if it's rooted, installed root checker *deivice does not have proper root access*. How can i tell my device if it's rooted or not? Can you tell me what's causing this problem? Is it region locked? Newbie here.
Pls help! Thanks!
bogart26 said:
Good day, my I9505 won't update to 4.3 via OTA. Still stuck to 4.2.2
i dont know what's causing this problem. Im from south east asia and 4.3 update was released last year. checked my devices if it's rooted, installed root checker *deivice does not have proper root access*. How can i tell my device if it's rooted or not? Can you tell me what's causing this problem? Is it region locked? Newbie here.
Pls help! Thanks!
Click to expand...
Click to collapse
Try using Kies PC software to update. It will let you know if your phone has been modified and refuse to update
JohnnyInBriz said:
Try using Kies PC software to update. It will let you know if your phone has been modified and refuse to update
Click to expand...
Click to collapse
thanks for the reply. Used Kies and this message showed up " Your device's current firmware version is not supported to update firmrware via Kies" CURRENT FIRMWARE VERSION: PDA: MEA/ PHONE: MEA/ CSC: MEA(DBT)
searched the version of my phone here is the list:
AP: I9505XXUBMEA
CP: I9505XXUBMEA
CSC: I9505OXABMEA
my device status is Official...
is there any conflict on the version of my phone? actually Im the 2nd owner of the phone, don't know what the 1st owner did to it (modification or anything...) and where the phone came from. MANY THANKS!
i don't have any knowledge on rooting a phone.
bogart26 said:
thanks for the reply. Used Kies and this message showed up " Your device's current firmware version is not supported to update firmrware via Kies" CURRENT FIRMWARE VERSION: PDA: MEA/ PHONE: MEA/ CSC: MEA(DBT)
searched the version of my phone here is the list:
AP: I9505XXUBMEA
CP: I9505XXUBMEA
CSC: I9505OXABMEA
my device status is Official...
is there any conflict on the version of my phone? actually Im the 2nd owner of the phone, don't know what the 1st owner did to it (modification or anything...) and where the phone came from. MANY THANKS!
Click to expand...
Click to collapse
It came from germany so feel free to download the file from here ,But the best thing you can do is flash a pre-rooted 4.2.2 rom man then flash any 4.3 custom rom you like just to avoid that Knox Warranty Void , so incase you got a problem later you can just go back to 4.2.2 but this is up to you.
Repulsa said:
It came from germany
thanks! so if my phone came from Germany, there is no way I cant update my phone via OTA and Kies because now the phone is now in Philippines? pls enlighten me on this.
I have no knowledge on flashing nor rooting a phone, can you give me step by step instructions? or is there any other way to update my phone officially? (requires no rooting or flashing) THANKS!
Click to expand...
Click to collapse
Hello,
I bought a GN3 in Hong Kong. I've tried many times to upgrade to the newest fw via OTA or Kies unsuccesfully.
Here is the details of my phone:
AP: N9005ZHUBMI7
CP: N9005XXUBMI5
CSC: N9005ZZHBMI7
As soon as the phone tries to install the new firmware, the phone gives an error and stops the upgrade. I don't understand why.
I would like to upgrade to an european FW like ITA nobrand. And I have some questions:
1) Will the CSC change as I flash the new FW, I mean will be installed the new CSC ?
2) I heard about the knox trigger. Will it be triggered or not ?
3) The status of the phone will remain "Official" ?
4) The upgrade to the new firmware MK2 will not allow to get the root anymore ?
5) Can I upgrade to new released FW in the future via OTA or Kies ?
Thank you in advance.
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
1. Flashing the correct firmware for your device via ODIN DON'T trig KNOX counter. Be relaxed.
2. One of the best method for know your CSC (code of country) is rebooting in STOCK RECOVERY and look close the text: "Applied the CSC-code: XXX" like in the pic attached.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
Open Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
The latest one will be on the top of the list.
vndnguyen said:
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
The latest one will be on the top of the list.
Click to expand...
Click to collapse
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
mehrdady said:
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
Click to expand...
Click to collapse
Flashing a stock firmware via Odin will not erase your apps.
I personally doesn't face with wifi and cell connection.
Hello, I have an S3 Neo (I9300I) with Android 4.3 and I would like to upgrade to 4.4 so I can start installing other roms. The question I have is what 4.4 version corresponds to my 4.3 version?
AP: i9300ixxuand1
CP: i9300ixxuand1
CSC: i9300iojvand1
I don't wanna have any conflicts with my phone not detecting my phone operator.
Thanks.
Okay I started reasearching:
https://www.sammobile.com/firmwares/galaxy-s--neo/GT-I9300I/MID/
I took the AP and searched for it on Google. The Iraq MID has the same jellybean AP Version.
But I don't know what the CSC is for (still noob).
I any case make a backup with TWRP.
You can literally install any official firmware and it'll work. The only problem you might get is a non-working camera. If such happens, check this thread made by me. Step 5 is the one you wanna look for in this situation xP
Have fun flashing and welcome to the world of Android customization!!
He told you everything.