Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
LilSasa said:
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
Click to expand...
Click to collapse
okay i will try it, anyway what are other compilation of CMW?
AldRezaine said:
okay i will try it, anyway what are other compilation of CMW?
Click to expand...
Click to collapse
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
anasdcool71 said:
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Still not working. I already flashed back to stock rom but failed.
vangeodee said:
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
Click to expand...
Click to collapse
It works but when I install Link2Sd app my phone reboot itself and stuck in the boot screen.
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
I will give it try and see if it works..
I don't think your supposed to use Link2SD?
Ohhhh leave it try to flash ussrv6 it's awesome man very smooth fast and stable than hperion...
Sent from my GT-S5360 using xda premium
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
wipe dalvik cache
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Ameya0909 said:
wipe dalvik cache
Click to expand...
Click to collapse
Already did sir a million times but still problem persist..
vangeodee said:
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Click to expand...
Click to collapse
Thanks sir for sharing your knowledge but I think already know about it...
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
yehs14 said:
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
Click to expand...
Click to collapse
What kernel Im going to flash...? HYPERION has built-in kernel already..
Related
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
copied from my previous post
vangeodee said:
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
Click to expand...
Click to collapse
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
9W2BOL said:
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1465800
go dig in that thread, you should find it eventually. also you need to know how to use Odin flasher, but that's already included in the guide.
9W2BOL said:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
Click to expand...
Click to collapse
you may immediately flash to DXLF1. just go to download mode without doing anything. Like I said, flashing stock roms is as good as getting your phone right from the factory.
after flashing to DXLF1 you may retry flashing Hyperion. if that doesn't work, then refer to my previous post on what I did.
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
you should wipe data wipe cache wipe dalvik cache as it can cause bootloop then try to install it again and for flashing rom you do not need root access .
press thank if I helped you
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
had the same problem before. ive tried 4 times but the result was the same.. i get stuck at boot logo. then i flashed ddle1 via odin and installed hyperion. fisrt try success... try to flash different baseband.
Thanks for the suggestion.
Sent from my GT-S5360 using xda premium
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
thy this procedure dude.
go to cmw then go to mounts and storage the format system, data, and cache after that mount system, data and cache. then go back then wipe data and cache then flash the room then wipe data only then reboot. if it is still not booting go to stock recovery then wipe data and cache then flash the rom. after flashing wipe data only don't wipe cache. then reboot. it take 3 minutes to boot for first time. :good:
just flash from stock and evrything will be good
Sent from my GT-S5360 using xda app-developers app
you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how
deathnotice01 said:
you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how
Click to expand...
Click to collapse
I will try the mount system.
Give this a try...
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this....
1. install repencis repencis rom. after scanning, boot recovery and install hyperion Rom.
2. in recovery, wipe data and cache and select install zip from sd and select hyperion zip.
3. enjoy...
work with me all the time... Hope work with you too. good luck.
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this:
1) flash back stock rom DLXF1/DLXF2 via ODIN
2) boot via CWM
3) do wipe data/reset(2x), wipe cashe partition(2x)
4) go to ADVANCED
5) wipe Dalvik Cashe
6) go back
7) install zip from sd
8) choose zip from sdcard
9) select the HYPERION ROM zip
OR if it still stuck on boot logo
1) flash back to stock rom
2) ROOT YOUR PHONE
then do steps #2 to #9
That works for me :good::good:
Goodluck!
I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2
Mo0s said:
I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
tjsgy said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
Done.... Still stuck the Gakaxy Y logo
Sent from my GT-S5360 using Tapatalk 2
Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app
devilrulz4ever said:
Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Ok, can you please post an alternative link for the rom. I'm having problems downloading from the Mediafire link
Sent from my GT-S5360 using Tapatalk 2
http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!
Cool.yash17 said:
http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!
Click to expand...
Click to collapse
Does this one work?
Sent from my GT-S5360 using Tapatalk 2
I can flash jellyblast but im one the gt-5360T
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast
WEAREBORG2913 said:
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast
Click to expand...
Click to collapse
Auto rotation is already present in Jellyblast rom u can toggle it from status bar easily
funnypharmacist said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
I have the same problem and I followed the instructions on page 1 of the Jellyblast ROM exactly, also this one. After that I tried different ways with different CWM, choose an older version of the rom, reinstall Kuro Kernel after flashing Rom, delete second partition (ext2)... But I always get the bootloop.
Edit:
Solved: I made a stupid mistake. I chose on the download page the Update 5, because i thought it's the full ROM with update 5. Because of the green colour of the ROM download link, i didn't recognize that it's a link.
Hello Every One ..
I want to install merruk kernel 2.5 on hyperion rom 7.x .
I tried my best, but got failed.
First listen to me.
Iam not a noob, I have used merruk kernel 2.5 with cod rom .
I know the whole procedure.
I am doing the same.
I want to tell 1 thing more, that is, i can't install merruk 2.0 too :/
when i flash it via CMW, it says installation done, completed etc..
but in settings it stil shows savie :S
having savie, and keeping backup, i installed merruk kernel 2.5, and then restored system, data, cache, .. all got fine :S
but nothing happend after boot logo :S
it stucked. i did my best.. nOw what to do. plz tell me !
DO NOT REBOOT after and every flashing
follow this,,
1-AT FIRST COPY THE below FILES TO SDCARD'S ROOT
2. EXTRACT boot.img FILE FROM Merruk Technology 2.0.tar To sd card Root
3. GO TO RECOVERY MODE THEN GO CMW RECOVERY
4. IN CMW CHOOSE install zip from SdCard SELECT kernel update.zip AND FLASH IT. (it will search boot.img and flashes it automatically)
3. BACKUP YOUR ROM IN CMW (after finished DO nOT REBOOT)
5. IN CMW FLASH Elite-modules.zip (DO NOT REBOOT)
6. NOW FLASH Ext4-Converter-signed.zip in CMW.(this is the merruk2.5) DO NOT REBOOT
8. In Cmw GO TO backup/restore
»Select Advance Restore
» Restore System , data & cache
Do Not Restore boot img and sd-ext. (AFTER FINISHED the 3 FILES,, DO NOT WIPE DATA AND CACHE)
9. Now Reboot system .
10. Check About Phone.
kimerika said:
DO NOT REBOOT after and every flashing
follow this,,
1-AT FIRST COPY THE below FILES TO SDCARD'S ROOT
2. EXTRACT boot.img FILE FROM Merruk Technology 2.0.tar To sd card Root
3. GO TO RECOVERY MODE THEN GO CMW RECOVERY
4. IN CMW CHOOSE install zip from SdCard SELECT kernel update.zip AND FLASH IT. (it will search boot.img and flashes it automatically)
3. BACKUP YOUR ROM IN CMW (after finished DO nOT REBOOT)
5. IN CMW FLASH Elite-modules.zip (DO NOT REBOOT)
6. NOW FLASH Ext4-Converter-signed.zip in CMW.(this is the merruk2.5) DO NOT REBOOT
8. In Cmw GO TO backup/restore
»Select Advance Restore
» Restore System , data & cache
Do Not Restore boot img and sd-ext. (AFTER FINISHED the 3 FILES,, DO NOT WIPE DATA AND CACHE)
9. Now Reboot system .
10. Check About Phone.
Click to expand...
Click to collapse
First of all thnx for helping me!
2ndly, i did the same steps on hyperion rom 7.x
( NO REBOOTS )
but still got the same boot loop, i mean I waited for 5 mins, but nothing happened.
Then i tried to install the merruk kernel of Hyperion 7 GM FINAL.
I did the same as u told, but when i was restoring the system, it gave an error.
Now Iam again flashing Hyperion 7.X and again flashing Merruk Kernel.
this i will wait for 10 - 15 mins after applying the whole procedure. Lets pray :S
WOOOOHOOOOOOO ! !!!
MAN.. I think, ur procedure was wrong..
I simple flashed hyperion rom 7.x
then made its backup.. and then installed merruk kernel 2.5 and elite modules ..
and then restored sytem data cache..
and boot succeed
THANX ALOT ...
ok...ok....ok..
i think u just right,,,one xda member flash the same way just like yours and he did succed,,
but i my case i use my steps to hyperion and ussr and i succed,,
on the second thought,, maybe MT2.0 PRE is not required to flash after all,because MT2.5 ext4 converter signed.zip has a boot.img..LOL
what do you think,,
my procedures is took by mai,,
Yeah Rite.. btw tell me 1 thing, is there any solution of this..
when iam over with my mob, and make it lock, (SCREEN OFF) , then when i press the menu button , it takes more tym to show the screen. why is that so :S and how to overcome it.. iam using cpu tuner ..
that normal,, cause mt2.5 has wakeclock issue
mastiyard said:
WOOOOHOOOOOOO ! !!!
MAN.. I think, ur procedure was wrong..
I simple flashed hyperion rom 7.x
then made its backup.. and then installed merruk kernel 2.5 and elite modules ..
and then restored sytem data cache..
and boot succeed
THANX ALOT ...
Click to expand...
Click to collapse
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
shubhs4frndz said:
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
you forgot 1, ext4 converter-signed.zip,,,that include MT2.5 which have the freq of 1.248MH..
follow my TUT above
shubhs4frndz said:
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Man if u are not succeeded with the procedure of SENIOR MEMBER. Than follow me..
flash the rom, then boot it 1 time..
than backup it..
then install elite modules, and ext4_signed.zip.
then reboot the recovery..
now restore system cache and data..
and you will be succeeded, indeeeeed .
kimerika.. tell me 1 thing man ..
now i want some customization in my STATUS BAR..
i want yellow colored battery icon and signal and wifi icon..
what the problem is, i tried status bar greper 1.8, and found some icons for signal and battery from the internet..
But due to status bar greper 1.8 , i can't change wifi icon :S
and with some patches that include status bar greper 1.8, by them, wifi icon gets hide :S i can't see it on the status bar..
leave it..
just help me in getting yellow coloured battery icon, signal icon and wifi icon :/
My own !
When i flashed Hyperion 7 GM i first go on overclocking...
So this is the procedure i did...:laugh:
1.Download PDA_merruk.tar and Ext4 converter.zip
2.Place Ext4 converter.zip in the root of your SD Card and place PDA_merruk.tar to your computer...(anywhere you like!)
3.Boot into CWM
4.Go to Backups and Storage and do a Backup
5.Go to Install zip from SD Card and choose zip from SD Card
6.Find Ext4 converter.zip
7.Flash it ! :laugh:
8.After that reboot
9.It will stuck on bootlogo so don't worry just remove the battery and insert it again..
10.Go to ODIN Mode (Volume Down,Home Key and Power Button)
11.Then press Volume up when the ODIN Mode shows up..
12.Get your USB Cable then insert it to your computer...
13.When you see the 0:[COM:XX] it means that your SGY is connected
14.Go to PDA then choose PDA_merruk.tar
15.Then press START
16.After that it will say PASS! and remove your SGY
17.You will need to remove and insert your battery again
18.Use the three button combo !
19.You will see the permanent CWM..
20.Go to Backups and Restore and Choose Advance Restore then choose the backup that day then restore system ONLY!
21.After the Restore go Wipe Data/Factory Reset
22.Wipe Cache
23.Go to Advanced then choose Wipe Dalvik Cache
24.Wide Battery Stats
25.Reboot system then you are good to go !
Works Always and NEVER fails me ! (works also on stock ROM!)
You will also get overclocked after doing this steps BTW !
Notes :
1.Must have 100% battery life
2.Must have ODIN 1.85
3.Must have Samsung Drivers
You can all get these files from Mr. Google
Required files :
Ext4 converter.zip
PDA_merruk.tar
ODIN 1.85
Samsung Drivers
Search them by USing Mr. Google.....
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
aman95 said:
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
Click to expand...
Click to collapse
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
vlc07 said:
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
Click to expand...
Click to collapse
can you explain, how to flash kernel. i think, i am facing problem dping this
aman95 said:
can you explain, how to flash kernel. i think, i am facing problem dping this
Click to expand...
Click to collapse
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
marcussmith2626 said:
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
Click to expand...
Click to collapse
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
aman95 said:
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
Click to expand...
Click to collapse
Flash instructions are given in the rom thread only.
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
aman95 said:
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
Click to expand...
Click to collapse
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
redndian said:
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
Click to expand...
Click to collapse
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
aman95 said:
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
Click to expand...
Click to collapse
you can add your own task manager to the framework or use an app from the playstore
and dont ask to crack apps to get paid versions or i'll report if this continues