Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
had the same problem before. ive tried 4 times but the result was the same.. i get stuck at boot logo. then i flashed ddle1 via odin and installed hyperion. fisrt try success... try to flash different baseband.
Thanks for the suggestion.
Sent from my GT-S5360 using xda premium
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
thy this procedure dude.
go to cmw then go to mounts and storage the format system, data, and cache after that mount system, data and cache. then go back then wipe data and cache then flash the room then wipe data only then reboot. if it is still not booting go to stock recovery then wipe data and cache then flash the rom. after flashing wipe data only don't wipe cache. then reboot. it take 3 minutes to boot for first time. :good:
just flash from stock and evrything will be good
Sent from my GT-S5360 using xda app-developers app
you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how
deathnotice01 said:
you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how
Click to expand...
Click to collapse
I will try the mount system.
Give this a try...
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this....
1. install repencis repencis rom. after scanning, boot recovery and install hyperion Rom.
2. in recovery, wipe data and cache and select install zip from sd and select hyperion zip.
3. enjoy...
work with me all the time... Hope work with you too. good luck.
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this:
1) flash back stock rom DLXF1/DLXF2 via ODIN
2) boot via CWM
3) do wipe data/reset(2x), wipe cashe partition(2x)
4) go to ADVANCED
5) wipe Dalvik Cashe
6) go back
7) install zip from sd
8) choose zip from sdcard
9) select the HYPERION ROM zip
OR if it still stuck on boot logo
1) flash back to stock rom
2) ROOT YOUR PHONE
then do steps #2 to #9
That works for me :good::good:
Goodluck!
Related
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
LilSasa said:
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
Click to expand...
Click to collapse
okay i will try it, anyway what are other compilation of CMW?
AldRezaine said:
okay i will try it, anyway what are other compilation of CMW?
Click to expand...
Click to collapse
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
anasdcool71 said:
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Still not working. I already flashed back to stock rom but failed.
vangeodee said:
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
Click to expand...
Click to collapse
It works but when I install Link2Sd app my phone reboot itself and stuck in the boot screen.
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
I will give it try and see if it works..
I don't think your supposed to use Link2SD?
Ohhhh leave it try to flash ussrv6 it's awesome man very smooth fast and stable than hperion...
Sent from my GT-S5360 using xda premium
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
wipe dalvik cache
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Ameya0909 said:
wipe dalvik cache
Click to expand...
Click to collapse
Already did sir a million times but still problem persist..
vangeodee said:
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Click to expand...
Click to collapse
Thanks sir for sharing your knowledge but I think already know about it...
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
yehs14 said:
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
Click to expand...
Click to collapse
What kernel Im going to flash...? HYPERION has built-in kernel already..
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
copied from my previous post
vangeodee said:
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
Click to expand...
Click to collapse
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
9W2BOL said:
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1465800
go dig in that thread, you should find it eventually. also you need to know how to use Odin flasher, but that's already included in the guide.
9W2BOL said:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
Click to expand...
Click to collapse
you may immediately flash to DXLF1. just go to download mode without doing anything. Like I said, flashing stock roms is as good as getting your phone right from the factory.
after flashing to DXLF1 you may retry flashing Hyperion. if that doesn't work, then refer to my previous post on what I did.
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
you should wipe data wipe cache wipe dalvik cache as it can cause bootloop then try to install it again and for flashing rom you do not need root access .
press thank if I helped you
Just installed Hyperion via Clockwork Mode and I am stuck in a bootloop, could I get some help with this?
Install another rom or the same rom
By reading the installation instruction properly
Sent from my GT-S5360 using xda premium
flash stock Rom using Odin then flash Hyperion again properly or another Rom
This is how to flash stock Rom via Odin
http://forum.xda-developers.com/showthread.php?t=1465800
So 2 android phones walk into a bar
At first i also have bootloops, hmmm try to flash again the same ROM
But this time wipe data/cache in CWM and then boot into recovery then wipe data/cache again then flash
Boncey said:
Just installed Hyperion via Clockwork Mode and I am stuck in a bootloop, could I get some help with this?
Click to expand...
Click to collapse
*flash a stock rom
*wipe ur ext partition if u have it (using link2sd)
*then flash Hiperion
oh, it's you again u made it.
*flash with stock rom using Odin
*flash with CWM that Hyperion (read the instruction carefully on the Hyperion Thread)
goodluck
Did all of that before you guys said, still gives me a bootloop, do I need to root my phone? But, when I root it I can't mount /system or /data or the other one
Boncey said:
Did all of that before you guys said, still gives me a bootloop, do I need to root my phone? But, when I root it I can't mount /system or /data or the other one
Click to expand...
Click to collapse
use another cwm or try cwm_bla_bla.zip
Link meh?
Boncey said:
Link meh?
Click to expand...
Click to collapse
i dont have a link but use the xda search botton it will help u a lot.good luck.
Still nothing :l
STEPS TO FLASH HYPERION (worked for me 100%)
- Flash stock rom via odin
- Reboot and go to CWM
- Clear Data/Reset and Cache
- Mount System/Sdcard/Data/Cache, (Sometimes Data/Cache can't be mounted it is OKAY)
- Flash Hyperion
- DO NOT REBOOT YET
- Go to Advanced
- Boot to Recovery
- Clear Data
- Clear Cache
- Reboot
Try it
Sent from my GT-S5360 using xda app-developers app
Make sure you're in a stock kernel first.
@boncey
Try the instruction provided by jeannuel's
Its working....good
Sent from my GT-S5360 using xda premium
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
aman95 said:
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
Click to expand...
Click to collapse
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
vlc07 said:
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
Click to expand...
Click to collapse
can you explain, how to flash kernel. i think, i am facing problem dping this
aman95 said:
can you explain, how to flash kernel. i think, i am facing problem dping this
Click to expand...
Click to collapse
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
marcussmith2626 said:
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
Click to expand...
Click to collapse
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
aman95 said:
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
Click to expand...
Click to collapse
Flash instructions are given in the rom thread only.
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
aman95 said:
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
Click to expand...
Click to collapse
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
redndian said:
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
Click to expand...
Click to collapse
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
aman95 said:
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
Click to expand...
Click to collapse
you can add your own task manager to the framework or use an app from the playstore
and dont ask to crack apps to get paid versions or i'll report if this continues
I can't install any custom rom after flashing stock rom on my galaxy y :crying:
can any one help me to solve this problem ?
M.E.10 said:
I can't install any custom rom after flashing stock rom on my galaxy y :crying:
can any one help me to solve this problem ?
Click to expand...
Click to collapse
First this is wrong section
Two what custom rom you want to install ? Did you follow instruction correctly ?
Mranggapo said:
First this is wrong section
Two what custom rom you want to install ? Did you follow instruction correctly ?
Click to expand...
Click to collapse
the custom rom i tried to install is NEMESIS.PHOENIX-signed.
i installed the both before flash to stock rom and the both worked well
after flash to stock rom i tried to install them again but the screen became black
M.E.10 said:
the custom rom i tried to install is NEMESIS.PHOENIX-signed and JELLYBLASTV3.signed
i installed the both before flash to stock rom and the both worked well
after flash to stock rom i tried to install them again but the screen became black
Click to expand...
Click to collapse
Wait for sometime, it takes time to boot especially when you are clearing dalvik cache
Mranggapo said:
Wait for sometime, it takes time to boot especially when you are clearing dalvik cache
Click to expand...
Click to collapse
i waited for a long time but no thing happen so i thought that the bootloader locked
i'm using the stock rom now but i want to install custom rom i tried it several times before ask for help
M.E.10 said:
i waited for a long time but no thing happen so i thought that the bootloader locked
i'm using the stock rom now but i want to install custom rom i tried it several times before ask for help
Click to expand...
Click to collapse
Generally for installing custom rom this steps should help
Wipe data and cache
Mount system data cache
Flash zip
Reboot
For firmware use where you live from
Mranggapo said:
Generally for installing custom rom this steps should help
Wipe data and cache
Mount system data cache
Flash zip
Reboot
For firmware use where you live from
Click to expand...
Click to collapse
i followed this steps before and it work ,i installed many custom roms before flashing to stock rom and all of them was working well
but when i flash my phone to custom from by using Odin3_v1.84 to flash Galaxy Y 2.3.6 Update (Indian).(DA) i can't install any custom rom again
M.E.10 said:
i followed this steps before and it work ,i installed many custom roms before flashing to stock rom and all of them was working well
but when i flash my phone to custom from by using Odin3_v1.84 to flash Galaxy Y 2.3.6 Update (Indian).(DA) i can't install any custom rom again
Click to expand...
Click to collapse
ok here is what you have to do:
1.go to recovery wipe data wipe cache
2.go to cwm re wipe data and cache again
3.go to mount and storage format system&data&cache then mount every thing
4.go to advance wipe dalvik cache and fix permission
5.flash the rom
if that didn't do it try flashing stock vie one more time and repeat my steps
Which kernal are you stock or custom
If Stock
A problem was being in update binary dealete rom from sdcard downloads again pls do no extract it boot into recovery mode wipe data wiprle cache mount everything wipe dalik cache then flash the rom
If custom
You Don't need downloads again the rom
Boot into recovery mode wipe data wipe cache partion mount everything flash the rom
try to odin it again with old firmware. maybe this will fix your problem.
thanks
thanks for everyone i could install mini rom custom rom by using cwm
and i found that the both roms i tried wasn't work correctly so they fail in installing
M.E.10 said:
thanks for everyone i could install mini rom custom rom by using cwm
and i found that the both roms i tried wasn't work correctly so they fail in installing
Click to expand...
Click to collapse
all roms here work fine
make sure you format system data cache then mount system data cache in cwm before flashing the rom zip
you also need to be on the correct file system and kernel depending on rom - eg stock based kernels for stock based rom and ext file system and a cm kerenl for cm based roms