i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
aman95 said:
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
Click to expand...
Click to collapse
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
vlc07 said:
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
Click to expand...
Click to collapse
can you explain, how to flash kernel. i think, i am facing problem dping this
aman95 said:
can you explain, how to flash kernel. i think, i am facing problem dping this
Click to expand...
Click to collapse
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
marcussmith2626 said:
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
Click to expand...
Click to collapse
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
aman95 said:
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
Click to expand...
Click to collapse
Flash instructions are given in the rom thread only.
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
aman95 said:
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
Click to expand...
Click to collapse
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
redndian said:
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
Click to expand...
Click to collapse
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
aman95 said:
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
Click to expand...
Click to collapse
you can add your own task manager to the framework or use an app from the playstore
and dont ask to crack apps to get paid versions or i'll report if this continues
Related
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
LilSasa said:
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
Click to expand...
Click to collapse
okay i will try it, anyway what are other compilation of CMW?
AldRezaine said:
okay i will try it, anyway what are other compilation of CMW?
Click to expand...
Click to collapse
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
anasdcool71 said:
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Still not working. I already flashed back to stock rom but failed.
vangeodee said:
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
Click to expand...
Click to collapse
It works but when I install Link2Sd app my phone reboot itself and stuck in the boot screen.
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
I will give it try and see if it works..
I don't think your supposed to use Link2SD?
Ohhhh leave it try to flash ussrv6 it's awesome man very smooth fast and stable than hperion...
Sent from my GT-S5360 using xda premium
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
wipe dalvik cache
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Ameya0909 said:
wipe dalvik cache
Click to expand...
Click to collapse
Already did sir a million times but still problem persist..
vangeodee said:
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Click to expand...
Click to collapse
Thanks sir for sharing your knowledge but I think already know about it...
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
yehs14 said:
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
Click to expand...
Click to collapse
What kernel Im going to flash...? HYPERION has built-in kernel already..
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
had the same problem before. ive tried 4 times but the result was the same.. i get stuck at boot logo. then i flashed ddle1 via odin and installed hyperion. fisrt try success... try to flash different baseband.
Thanks for the suggestion.
Sent from my GT-S5360 using xda premium
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
thy this procedure dude.
go to cmw then go to mounts and storage the format system, data, and cache after that mount system, data and cache. then go back then wipe data and cache then flash the room then wipe data only then reboot. if it is still not booting go to stock recovery then wipe data and cache then flash the rom. after flashing wipe data only don't wipe cache. then reboot. it take 3 minutes to boot for first time. :good:
just flash from stock and evrything will be good
Sent from my GT-S5360 using xda app-developers app
you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how
deathnotice01 said:
you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how
Click to expand...
Click to collapse
I will try the mount system.
Give this a try...
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this....
1. install repencis repencis rom. after scanning, boot recovery and install hyperion Rom.
2. in recovery, wipe data and cache and select install zip from sd and select hyperion zip.
3. enjoy...
work with me all the time... Hope work with you too. good luck.
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this:
1) flash back stock rom DLXF1/DLXF2 via ODIN
2) boot via CWM
3) do wipe data/reset(2x), wipe cashe partition(2x)
4) go to ADVANCED
5) wipe Dalvik Cashe
6) go back
7) install zip from sd
8) choose zip from sdcard
9) select the HYPERION ROM zip
OR if it still stuck on boot logo
1) flash back to stock rom
2) ROOT YOUR PHONE
then do steps #2 to #9
That works for me :good::good:
Goodluck!
when i play music , calling smeone, and without any reason my phone is restarting automatically , i dnt have any kind of android exprnce b4 so plssss help me ,
My phone Nexus 4
SHASHIKAAYESH said:
when i play music , calling smeone, and without any reason my phone is restarting automatically , i dnt have any kind of android exprnce b4 so plssss help me ,
My phone Nexus 4
Click to expand...
Click to collapse
bump
SHASHIKAAYESH said:
when i play music , calling smeone, and without any reason my phone is restarting automatically , i dnt have any kind of android exprnce b4 so plssss help me ,
My phone Nexus 4
Click to expand...
Click to collapse
Try wiping caches. And if that doesn't work flash a new ROM
why on earth would you bump a thread that is less than 10 minutes old?!?
Its already at the top
You need to flash back to a more stable version, you probably on some nightly
Sent from my Nexus 4 using xda premium
and it could be one of your apps wreaking havoc too
Justizs26 said:
Try wiping caches. And if that doesn't work flash a new ROM
Click to expand...
Click to collapse
i know ths is embarrassing , could u pls give me a link to flash (steps)
plssss
SHASHIKAAYESH said:
i know ths is embarrassing , could u pls give me a link to flash (steps)
plssss
Click to expand...
Click to collapse
Well first you need a recovery which I assume you don't have yet. Read this to learn how to install one:
http://forum.xda-developers.com/showthread.php?t=2018179
You will need to unlock the boot loader and then flash a recovery. (I would recommend TWRP)
Then boot into recovery and go to the wipe menu. From there, select cache and dalvik cache and then wipe them.
If that doesn't solve the problem, choose a ROM from the development section, download it and put it onto the /sdcard partition. Then boot into recovery and do a factory reset from the wipe menu. Finally go to the install menu and select the ROM you downloaded and flash it.
Unlocked/rooted still rebooting
chromium96 said:
Well first you need a recovery which I assume you don't have yet. Read this to learn how to install one:
http://forum.xda-developers.com/showthread.php?t=2018179
You will need to unlock the boot loader and then flash a recovery. (I would recommend TWRP)
Then boot into recovery and go to the wipe menu. From there, select cache and dalvik cache and then wipe them.
If that doesn't solve the problem, choose a ROM from the development section, download it and put it onto the /sdcard partition. Then boot into recovery and do a factory reset from the wipe menu. Finally go to the install menu and select the ROM you downloaded and flash it.
Click to expand...
Click to collapse
Thnx guys , i hve done unlocking , rooting , wipe cache and all da stuff ,i've put cyanogenmod version 10.1 , bt i have tht rebooting issue nw also nt much as previously bt its rebooting
Help
plssssssssssssssssssssssssssss help-
Download and install trickstermod from play store, and higher your voltages a bit and see the results.
more info pls
sandy-achar said:
Download and install trickstermod from play store, and higher your voltages a bit and see the results.
Click to expand...
Click to collapse
i have installed it which voltage i shud increase ? i cnt undstnd tht application, plsssssssss
So yeah, hey XDA, first post here
I have got a problem with my SGY, whenever i flash a custom kernel via CWM, I get stuck at splash screen. And when i flash stock kernel via Odin, phone boots normally.
Do you guys know what is the problem?
Kernels I have tried:
1.Kuro - loop at splash
2.Hells-fusion - loop at splash
3.Savie - stuck at splash
Any help would be really appreciated.
xddxd said:
So yeah, hey XDA, first post here
I have got a problem with my SGY, whenever i flash a custom kernel via CWM, I get stuck at splash screen. And when i flash stock kernel via Odin, phone boots normally.
Do you guys know what is the problem?
Kernels I have tried:
1.Kuro - loop at splash
2.Hells-fusion - loop at splash
3.Savie - stuck at splash
Any help would be really appreciated.
Click to expand...
Click to collapse
Most likely you failed to mount system before flashing the zip or your baseband needs updating
Make sure you goto mounts & storage in cwm and mount system before flashing any zip (will display "unmount system" if it is mounted)
To update baseband flash one of the latest stock roms via odin - see my firmware thread - link it signature
marcussmith2626 said:
Most likely you failed to mount system before flashing the zip or your baseband needs updating
Make sure you goto mounts & storage in cwm and mount system before flashing any zip (will display "unmount system" if it is mounted)
To update baseband flash one of the latest stock roms via odin - see my firmware thread - link it signature
Click to expand...
Click to collapse
Thanks for your reply
Yeah I did mount everything in CWM, it's probably the baseband thing. I have the latest firmware file for my region (Baltic States). Will it work?
Here is the version of it:
PDA:XXMI1
MODEM:XXMG1
CSC:SEBLL1
KERNEL:XXMI1
Anyways, gonna make a nandroid backup and try to flash the whole stock firmware.
EDIT:Flashed stock with wipe, rooted, flashed savie - no luck.
xddxd said:
Thanks for your reply
Yeah I did mount everything in CWM, it's probably the baseband thing. I have the latest firmware file for my region (Baltic States). Will it work?
Here is the version of it:
PDA:XXMI1
MODEM:XXMG1
CSC:SEBLL1
KERNEL:XXMI1
Anyways, gonna make a nandroid backup and try to flash the whole stock firmware.
EDIT:Flashed stock with wipe, rooted, flashed savie - no luck.
Click to expand...
Click to collapse
Yes that's the latest firmware
The only other thing I can think of is that you are using the wrong cwm
Here is my one - Flash it in stock recovery then mount system & flash zip
http://d-h.st/u2m
Also there are different versions of savie - make sure you are using the stock one if on stock rom and not the cm one
I would use hells fusion #50 myself for testing
marcussmith2626 said:
Yes that's the latest firmware
The only other thing I can think of is that you are using the wrong cwm
Here is my one - Flash it in stock recovery then mount system & flash zip
(Your link, can't post it because of limitation)
Also there are different versions of savie - make sure you are using the stock one if on stock rom and not the cm one
I would use hells fusion #50 myself for testing
Click to expand...
Click to collapse
Downloaded the CWM you provided, mounted everything, flashed hells-fusion, and still got bootloop
xddxd said:
Downloaded the CWM you provided, mounted everything, flashed hells-fusion, and still got bootloop
Click to expand...
Click to collapse
I dont know what your problem is - do you have any mount scripts for linking sdext
You can format data and wipe cache & delvik cache & see if it boots
Other than that without seeing your phone I cannot offer anything else
marcussmith2626 said:
I dont know what your problem is - do you have any mount scripts for linking sdext
You can format data and wipe cache & delvik cache & see if it boots
Other than that without seeing your phone I cannot offer anything else
Click to expand...
Click to collapse
Yep, I had link2sd, anyway to delete the script?
xddxd said:
Yep, I had link2sd, anyway to delete the script?
Click to expand...
Click to collapse
Use aroma file manager - Flash it in cwm with system mounted
Goto system/etc/init.d
Delete everything in there so nothing can conflict
http://forum.xda-developers.com/attachment.php?attachmentid=1408182&d=1350455938
marcussmith2626 said:
Use aroma file manager - Flash it in cwm with system mounted
Goto system/etc/init.d
Delete everything in there so nothing can conflict
http://forum.xda-developers.com/attachment.php?attachmentid=1408182&d=1350455938
Click to expand...
Click to collapse
It worked, thank you sooo much!! Can I use Link2sd now on kuro?
xddxd said:
It worked, thank you sooo much!! Can I use Link2sd now on kuro?
Click to expand...
Click to collapse
If done correctly than yes
marcussmith2626 said:
If done correctly than yes
Click to expand...
Click to collapse
Oh, and BTW savie still doesn't work xD
xddxd said:
Oh, and BTW savie still doesn't work xD
Click to expand...
Click to collapse
His kernel is technically banned on XDA due to not being able to provide the sources
All I can say is long as you are the right one - there's one for stock and one for cm7 but I'd just use hells fusion #50
marcussmith2626 said:
His kernel is technically banned on XDA due to not being able to provide the sources
All I can say is long as you are the right one - there's one for stock and one for cm7 but I'd just use hells fusion #50
Click to expand...
Click to collapse
Idk why, but Ramexpander says hells-fusion doesn't support swap so I went for kuro.
xddxd said:
Idk why, but Ramexpander says hells-fusion doesn't support swap so I went for kuro.
Click to expand...
Click to collapse
Hells fusion doesn't support swap - I don't think there's much point in it anyway but whatever works best for you
Dear brothers:
I installed the Roman
HYPERION 7 To my question
I found another Roman Hyperion 9
The new version
I wanted installed
The problem that I can not install
ROMs Enter the average Alrikfra
And follow the steps And I choose
the Roman file When I take off the
phone Romy preinstalled did not
change anything What is the
problem.? Average Alrikfra who use
it: Clockworkmod 5.0.2.6 You also
download the Android Rom L As
well as I faced the same problem
What is the reason for that.? Please
help.
abdoosman said:
Dear brothers:
I installed the Roman
HYPERION 7 To my question
I found another Roman Hyperion 9
The new version
I wanted installed
The problem that I can not install
ROMs Enter the average Alrikfra
And follow the steps And I choose
the Roman file When I take off the
phone Romy preinstalled did not
change anything What is the
problem.? Average Alrikfra who use
it: Clockworkmod 5.0.2.6 You also
download the Android Rom L As
well as I faced the same problem
What is the reason for that.? Please
help.
Click to expand...
Click to collapse
Somebody didn't mount system before flashing the rom zip
Format system data cache
Mount system data cache
Flash rom zip
Mount system data cache
Flash gapps
Restart
marcussmith2626 said:
Somebody didn't mount system before flashing the rom zip
Format system data cache
Mount system data cache
Flash rom zip
Mount system data cache
Flash gapps
Restart
Click to expand...
Click to collapse
I thank my brother
I am applying
the steps properly But Roman does not prove
I do not know what the
problem Question.
What is required
to install this Roman:
http://forum.xda-developers.com/galaxy-y/development/rom-cd-future-v8-t2989908
You apply all
the steps started And all my
attempts to install failed
Is the problem of Alkornel.? Is the problem of backup you keep it in my phone.? When I install the
Roman official program odin
Installation But fail in the
designated Romat
Is the problem of recovery.?
abdoosman said:
I thank my brother
I am applying
the steps properly But Roman does not prove
I do not know what the
problem Question.
What is required
to install this Roman:
http://forum.xda-developers.com/galaxy-y/development/rom-cd-future-v8-t2989908
You apply all
the steps started And all my
attempts to install failed
Is the problem of Alkornel.? Is the problem of backup you keep it in my phone.? When I install the
Roman official program odin
Installation But fail in the
designated Romat
Is the problem of recovery.?
Click to expand...
Click to collapse
The rom is not being flashed because you are not mounting system in Cwm before flashing the zip - it's as simple as that
marcussmith2626 said:
The rom is not being flashed because you are not mounting system in Cwm before flashing the zip - it's as simple as that
Click to expand...
Click to collapse
Brother, you are an expert
Tell me:
What do I do so I can install the
Roman
HYPERION 9 Rom or
Android L
Question: Do you speak
Arabic.?
To explain to me via
whatsapp
abdoosman said:
Brother, you are an expert
Tell me:
What do I do so I can install the
Roman
HYPERION 9 Rom or
Android L
Question: Do you speak
Arabic.?
To explain to me via
whatsapp
Click to expand...
Click to collapse
I'm English
Iv already given you instructions
Goto cwm
Mount's & storage
Format system data cache
Mount system data cache (you failed to do this - if it is mounted it will display "Unmount System")
Install zip from sd card
Select rom zip
Restart