Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
copied from my previous post
vangeodee said:
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
Click to expand...
Click to collapse
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
9W2BOL said:
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1465800
go dig in that thread, you should find it eventually. also you need to know how to use Odin flasher, but that's already included in the guide.
9W2BOL said:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
Click to expand...
Click to collapse
you may immediately flash to DXLF1. just go to download mode without doing anything. Like I said, flashing stock roms is as good as getting your phone right from the factory.
after flashing to DXLF1 you may retry flashing Hyperion. if that doesn't work, then refer to my previous post on what I did.
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
you should wipe data wipe cache wipe dalvik cache as it can cause bootloop then try to install it again and for flashing rom you do not need root access .
press thank if I helped you
Related
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
LilSasa said:
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
Click to expand...
Click to collapse
okay i will try it, anyway what are other compilation of CMW?
AldRezaine said:
okay i will try it, anyway what are other compilation of CMW?
Click to expand...
Click to collapse
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
anasdcool71 said:
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Still not working. I already flashed back to stock rom but failed.
vangeodee said:
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
Click to expand...
Click to collapse
It works but when I install Link2Sd app my phone reboot itself and stuck in the boot screen.
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
I will give it try and see if it works..
I don't think your supposed to use Link2SD?
Ohhhh leave it try to flash ussrv6 it's awesome man very smooth fast and stable than hperion...
Sent from my GT-S5360 using xda premium
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
wipe dalvik cache
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Ameya0909 said:
wipe dalvik cache
Click to expand...
Click to collapse
Already did sir a million times but still problem persist..
vangeodee said:
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Click to expand...
Click to collapse
Thanks sir for sharing your knowledge but I think already know about it...
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
yehs14 said:
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
Click to expand...
Click to collapse
What kernel Im going to flash...? HYPERION has built-in kernel already..
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
had the same problem before. ive tried 4 times but the result was the same.. i get stuck at boot logo. then i flashed ddle1 via odin and installed hyperion. fisrt try success... try to flash different baseband.
Thanks for the suggestion.
Sent from my GT-S5360 using xda premium
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
thy this procedure dude.
go to cmw then go to mounts and storage the format system, data, and cache after that mount system, data and cache. then go back then wipe data and cache then flash the room then wipe data only then reboot. if it is still not booting go to stock recovery then wipe data and cache then flash the rom. after flashing wipe data only don't wipe cache. then reboot. it take 3 minutes to boot for first time. :good:
just flash from stock and evrything will be good
Sent from my GT-S5360 using xda app-developers app
you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how
deathnotice01 said:
you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how
Click to expand...
Click to collapse
I will try the mount system.
Give this a try...
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this....
1. install repencis repencis rom. after scanning, boot recovery and install hyperion Rom.
2. in recovery, wipe data and cache and select install zip from sd and select hyperion zip.
3. enjoy...
work with me all the time... Hope work with you too. good luck.
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this:
1) flash back stock rom DLXF1/DLXF2 via ODIN
2) boot via CWM
3) do wipe data/reset(2x), wipe cashe partition(2x)
4) go to ADVANCED
5) wipe Dalvik Cashe
6) go back
7) install zip from sd
8) choose zip from sdcard
9) select the HYPERION ROM zip
OR if it still stuck on boot logo
1) flash back to stock rom
2) ROOT YOUR PHONE
then do steps #2 to #9
That works for me :good::good:
Goodluck!
Hi ,, all
Do you can Help me ?
My GalY is not Work , Flashing the ROM Jelly Blast ?
I Following step by step the tutorial in the Page Official and all step the result is bootloop
step by step from me ?
- The First me Flash the Stock Rom from ODIN .
- after that I Flash The JellyBlast Rom via CWM
- i'm wait wait wait 10 minute and the result is BOOTLoop
please someone user can Help me ?
my Gal Y is BootLoop and I want Installed the JBRom .
Sorry for I Can't English
You need to do a full data wipe and cache wipe before flashing the rom. Please read the instructions carefully.
||I'm just a PM away for help||
I have tried over and over again ..
Sorry For English ..
NearLighting said:
I have tried over and over again ..
Sorry For English ..
Click to expand...
Click to collapse
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
FYI, rooting isn't necessarily required for flashing roms. All custom roms so far are pre-rooted.
||I'm just a PM away for help||
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
Use Root or Deodex ROM ? DEODEX include the Root .. ?
hitme987 said:
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
Click to expand...
Click to collapse
Stock Recovery ? why not CWM ?
Sorry Bad English .
try wipe data/reset, wipe cache partition, in advanced mode wipe dalvik cache, then flash jellyblast
Sent from my GT-S5360
After flashing stock rom u should root ur phone nd den flash any rom
U can install creeds 3.5 on ur phone without root
Its d only rom which u can install without root
Sent from my GT-S5360 using xda premium
No it nlot. I installed hype gm without root!!
Sent from my GT-S5360 using xda app-developers app
NearLighting said:
Use Root or Deodex ROM ? DEODEX include the Root .. ?
Stock Recovery ? why not CWM ?
Sorry Bad English .
Click to expand...
Click to collapse
Root your phone. If already rooted, proceed to the next step.
Make sure that you're on Stock kernel.
If your'e NOT on Stock kernel, either flash stock kernel, or open the JELLYBLASTV3.signed.zip on your pc, delete boot.img from it, and then flash the zip. In that way, you'll be able to use ANY kernel you already have.
Switch off your phone.
Go to Clockwork mode. This is important, because CWM is necessary, or you won't be able to boot up with the new Kernel.
Use the volume keys to move up and down.
Wipe data and cache
Now choose: Install zip from sd card.
Choose JELLYBLAST V3.signed.zip
Choose "yes"
It will be Installed. Now reboot your phone. First boot will take time. Be patient.
If you have followed EVERYTHING above carefully, you will soon boot up to your new rom.
Please wait until media scanning is completed.
Enjoy!!!
so far all the roms i have taken from this forum have failed to flash, my recovery says it cant open the zip file.......
don't know what im doing wrong.......the device is rooted fine.....
after it has failed i then have problems restoring my back ups so i then need to flash stock with odin......
its a gt i9505, so i think im in the right section...
please advise....
mediaman123 said:
so far all the roms i have taken from this forum have failed to flash, my recovery says it cant open the zip file.......
don't know what im doing wrong.......the device is rooted fine.....
after it has failed i then have problems restoring my back ups so i then need to flash stock with odin......
its a gt i9505, so i think im in the right section...
please advise....
Click to expand...
Click to collapse
Which recovery are u using? And just for confirmation use root checker app and check the root status
.
123hiten said:
Which recovery are u using? And just for confirmation use root checker app and check the root status
.
Click to expand...
Click to collapse
all is good with the root checker and i am running twrp 2.5.0.1, tried to flash with cwm and the same happened......
mediaman123 said:
all is good with the root checker and i am running twrp 2.5.0.1, tried to flash with cwm and the same happened......
Click to expand...
Click to collapse
Option 1,
Flash Philz recovery and see if the issue is solved if not i would suggest a fresh start
Option 2,
1, Flash Stock firmware using
2, Reset the device from setting / account / backup&reset
3, Root using CF root
4, flash Philz recovery
5 ,Start flashing Roms u want
Please take a backup of important data B4 flashing and resseting the device
123hiten said:
Option 1,
Flash Philz recovery and see if the issue is solved if not i would suggest a fresh start
Option 2,
1, Flash Stock firmware using
2, Reset the device from setting / account / backup&reset
3, Root using CF root
4, flash Philz recovery
5 ,Start flashing Roms u want
Please take a backup of important data B4 flashing and resseting the device
Click to expand...
Click to collapse
Thanks for your help.....I will try restoring it to stock and start from the beginning.....will doing a factory reset in settings restore the stock recovery.....
I did actually try philz touch recovery....same thing happened....but I will try your option 2 and get back to you pronto.....
So I followed the steps you asked me too, twice and still no joy.....
philztouch recovery gives the following message:
E: Cab't open /external_sd/ROMS/SuperDroid_v4_m3ddog.zip (bad)
Installation aborted
Does it matter my custom rom file is on my external sd card?
The only thing i can think of is that i am trying to install a rom for different s4 variation maybe.........its the gt i9505, thats all i know....
HELP ME!!!......:crying:
mediaman123 said:
So I followed the steps you asked me too, twice and still no joy.....
philztouch recovery gives the following message:
E: Cab't open /external_sd/ROMS/SuperDroid_v4_m3ddog.zip (bad)
Installation aborted
Does it matter my custom rom file is on my external sd card?
The only thing i can think of is that i am trying to install a rom for different s4 variation maybe.........its the gt i9505, thats all i know....
HELP ME!!!......:crying:
Click to expand...
Click to collapse
Sorry for late reply
Since this also not helping I guess u have issue with root may be
Let's try little diffrnt
As per what I understood u have i9505 correct me if I m wrong
U download a pre rooted firmware from android devlpmnt thread
Flash the firmware reset and tell me the status of by he same and then will try flashing philz recovery
Edit link below for rooted firmware
http://forum.xda-developers.com/showthread.php?t=2250824
[ROM] WORLD PREMIERE: I9505 XXUBMGA DEODEX [4.2.2] - Pre-Rooted Stock ROM's Odin/CWM
.
mediaman123 said:
So I followed the steps you asked me too, twice and still no joy.....
philztouch recovery gives the following message:
E: Cab't open /external_sd/ROMS/SuperDroid_v4_m3ddog.zip (bad)
Installation aborted
Does it matter my custom rom file is on my external sd card?
The only thing i can think of is that i am trying to install a rom for different s4 variation maybe.........its the gt i9505, thats all i know....
HELP ME!!!......:crying:
Click to expand...
Click to collapse
Its telling you the problem... The rom you have above isn't complete or corrupted - IE"bad"
Either re-download the rom or try another rom...
ultramag69 said:
Its telling you the problem... The rom you have above isn't complete or corrupted - IE"bad"
Either re-download the rom or try another rom...
Click to expand...
Click to collapse
thanks, its just strange that the 2-3 roms i have tried have all returned that error message, I will download the rom you linked and get back to you.....
is that rom to go on with odin, as currently i have stock recovery......?
no joy with the linked rom......
same thing happened, i can successfully get it rooted and flash recoveries no problem......
is it possible its a sd card problem.....
also, when i go to restore the back up i make before flashing the rom, it reverts back to a brand new handset, so i need to set it all up again, put in my Google account details etc.......all my apps return obviously, but this isn't meant to happen is it......
it really is confusing me, all the other devices I have had in the past and currently have flashed ok........
when i wipe before the flash, its just the default factory reset, cache, dalvik I do , is this correct?
That should be fine, it is possible the sd card is corrupt or not communicating properly with the recovery. You could always put the rom on the internal sd card.... Just don't factory wipe or you could loose the rom you are trying to flash...
That didn't work either......so frustrated with this.......
Can someone go through the exact procedure....I know there are guides but personal experience s are best.....
mediaman123 said:
also, when i go to restore the back up i make before flashing the rom, it reverts back to a brand new handset, so i need to set it all up again, put in my Google account details etc.......all my apps return obviously, but this isn't meant to happen is it......
it really is confusing me, all the other devices I have had in the past and currently have flashed ok........
when i wipe before the flash, its just the default factory reset, cache, dalvik I do , is this correct?
Click to expand...
Click to collapse
Full Wipe Install means:
- Wipe Data / Factory Reset
- Wipe Cache and Dalvik Cache
- Format System partition
- Install
andymihail said:
Full Wipe Install means:
- Wipe Data / Factory Reset
- Wipe Cache and Dalvik Cache
- Format System partition
- Install
Click to expand...
Click to collapse
thanks....
I have been using twrp mostly....i don't believe the default wipe setting includes the system partition format...........could the absence of this formatting cause problems every time?
finally managed to flash a custom rom.......
the trick was to install the zip without any sort of wipe, then do the wipes after successful installation......
weird eh....
I can't install any custom rom after flashing stock rom on my galaxy y :crying:
can any one help me to solve this problem ?
M.E.10 said:
I can't install any custom rom after flashing stock rom on my galaxy y :crying:
can any one help me to solve this problem ?
Click to expand...
Click to collapse
First this is wrong section
Two what custom rom you want to install ? Did you follow instruction correctly ?
Mranggapo said:
First this is wrong section
Two what custom rom you want to install ? Did you follow instruction correctly ?
Click to expand...
Click to collapse
the custom rom i tried to install is NEMESIS.PHOENIX-signed.
i installed the both before flash to stock rom and the both worked well
after flash to stock rom i tried to install them again but the screen became black
M.E.10 said:
the custom rom i tried to install is NEMESIS.PHOENIX-signed and JELLYBLASTV3.signed
i installed the both before flash to stock rom and the both worked well
after flash to stock rom i tried to install them again but the screen became black
Click to expand...
Click to collapse
Wait for sometime, it takes time to boot especially when you are clearing dalvik cache
Mranggapo said:
Wait for sometime, it takes time to boot especially when you are clearing dalvik cache
Click to expand...
Click to collapse
i waited for a long time but no thing happen so i thought that the bootloader locked
i'm using the stock rom now but i want to install custom rom i tried it several times before ask for help
M.E.10 said:
i waited for a long time but no thing happen so i thought that the bootloader locked
i'm using the stock rom now but i want to install custom rom i tried it several times before ask for help
Click to expand...
Click to collapse
Generally for installing custom rom this steps should help
Wipe data and cache
Mount system data cache
Flash zip
Reboot
For firmware use where you live from
Mranggapo said:
Generally for installing custom rom this steps should help
Wipe data and cache
Mount system data cache
Flash zip
Reboot
For firmware use where you live from
Click to expand...
Click to collapse
i followed this steps before and it work ,i installed many custom roms before flashing to stock rom and all of them was working well
but when i flash my phone to custom from by using Odin3_v1.84 to flash Galaxy Y 2.3.6 Update (Indian).(DA) i can't install any custom rom again
M.E.10 said:
i followed this steps before and it work ,i installed many custom roms before flashing to stock rom and all of them was working well
but when i flash my phone to custom from by using Odin3_v1.84 to flash Galaxy Y 2.3.6 Update (Indian).(DA) i can't install any custom rom again
Click to expand...
Click to collapse
ok here is what you have to do:
1.go to recovery wipe data wipe cache
2.go to cwm re wipe data and cache again
3.go to mount and storage format system&data&cache then mount every thing
4.go to advance wipe dalvik cache and fix permission
5.flash the rom
if that didn't do it try flashing stock vie one more time and repeat my steps
Which kernal are you stock or custom
If Stock
A problem was being in update binary dealete rom from sdcard downloads again pls do no extract it boot into recovery mode wipe data wiprle cache mount everything wipe dalik cache then flash the rom
If custom
You Don't need downloads again the rom
Boot into recovery mode wipe data wipe cache partion mount everything flash the rom
try to odin it again with old firmware. maybe this will fix your problem.
thanks
thanks for everyone i could install mini rom custom rom by using cwm
and i found that the both roms i tried wasn't work correctly so they fail in installing
M.E.10 said:
thanks for everyone i could install mini rom custom rom by using cwm
and i found that the both roms i tried wasn't work correctly so they fail in installing
Click to expand...
Click to collapse
all roms here work fine
make sure you format system data cache then mount system data cache in cwm before flashing the rom zip
you also need to be on the correct file system and kernel depending on rom - eg stock based kernels for stock based rom and ext file system and a cm kerenl for cm based roms