Database Users

Phone Stuck on "Stick Together" screen

So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.

CaliCL9 said:
So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.
Click to expand...
Click to collapse
ROM based: D1.72.82124
Won't work on LEO 1.5 only 2.X will work.
You lucky ur phone boots!!
Flash stock rom again using sd-card (remember afterwards you have to flash HSPL back)

hehe very close call there. you have been in the wrong hd2 section. you do not have a 512 leo. had you flashed the wrong radio instead of the wrong rom, your phone would be dead now.
only use roms that specifically say tmous or t mo compatible.

xmoo said:
ROM based: D1.72.82124
Won't work on LEO 1.5 only 2.X will work.
You lucky ur phone boots!!
Flash stock rom again using sd-card (remember afterwards you have to flash HSPL back)
Click to expand...
Click to collapse
Whoa close call... so how do I flash my stock rom from the sd card and flash the hspl back? i want to just use the stock rom for now.. till i feel comfortable trying to use another rom

So i flashed my sd card with fat32 then dl'ed this file [ROM]RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship. so then i renamed the file to leoimg.nbh and this is what is showing up.. when i try to reboot holding the volume down and hittin the power button
Red, green, blue, white color screen again..
With this text in the red..
PB81120 HX-B3
SPL-2.08 HSPL 8G XE
0X05
CotullaHSPL 0x40
Then in the white is says Serial
So now what?

and heres why its a pain in the ar$€ when people post duplicate threads. just answered you in your other thread.

Need help!

hey guys,
i wanted to have android on my hd2 so i did everything i have to get it (RadioROM etc ) .so far so good.
When i start CLRCAD.exe and than haret.exe the screen gets black an so on
-->everything working until i have to fill in my PIN ,but if i touch the screen it goes off and the LEO vibrates and turns off :/
what went wrong ?
i tried it with RadioROM 2.10.50.08 ; 2.08 and RadioROM 2.12 but everytime the same .
I have HSPL 1.42.0000 and use the original German ROM on WinMob?!
plz help (and sorry for my english )

jonas2295 said:
hey guys,
i wanted to have android on my hd2 so i did everything i have to get it (RadioROM etc ) .so far so good.
When i start CLRCAD.exe and than haret.exe the screen gets black an so on
-->everything working until i have to fill in my PIN ,but if i touch the screen it goes off and the LEO vibrates and turns off :/
what went wrong ?
i tried it with RadioROM 2.10.50.08 ; 2.08 and RadioROM 2.12 but everytime the same .
I have HSPL 1.42.0000 and use the original German ROM on WinMob?!
plz help (and sorry for my english )
Click to expand...
Click to collapse
try these steps and my signature

[Q] Is my HD2 bricked? What can I do?

Hi there everyone!
I installed a NAND Android Rom Dl Desire Z or something... everything was working, but suddendly phone just crashes, and nothing but a white screen appear as soon as HD2 powers on.
The only thing i'm able to do is to go to 3 color mode (hardspl) - but all attempts to flash a wm6.5 rom failed because customruu failed in the middle of the process. freezes at 0% and then appears a communication error in the application.
Conclusion: as soon as phone turns on, only a white screen appears, with nothing written in it.
i've searched for 2 hours in xda and google, nothing similar came...
i've reflashed hardspl3 - sucessfull, but nothing changed, white screen still appears.
i've tried to flash other roms but always freezes at 0%, and appears communication error in customruu application.
I don't know what to do :/
Is there anyone who can help me?
Thank you very much!!

If you can still get into bootloader and you do have hspl installed, try flashing the winmo rom via sd card.

Will do!
I'll post feedback

Start flashing official 1.66(its EU, you need analog to 1024 LEO) WM 6.5 rom from HSPL, than HPSL3, radio with 576 RAM(Radio_2.15.50.14 for example), than MAGLDR112, and after these steps flash Android

Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!

Hello
Im thinking maybe your motherboard as many tmous users ?.. just thinking..maybe?? I don't hope it for you
Sent from my HTC HD2 using XDA App

It doesn't make sense :S
I never had any problem with it, and it was running a new Android rom for the second time.. then I take the phone out of the pocket and it is with a white screen...
I can get to the hspl boot but it isn't proving useful...
Any thoughts?

[Q][Help] Hanging HTC Screen After Flashing MAGLDR113

Hi, I have HD2 , and i would like to install the wm7 in this mobile... i followed instructions posted in the xda-dev pages.. after i did the instruction Installing the MAGLDR113, its stucked on the HTC Bootscreen...even i press the power button for long time no thing happen... i tried so many times but still no luck at all... please guys help me with this..
Thanks.
Rico.
HD2 progress:
--unit Updated SPL-2.08.HSPL (done)
--unit installed MAGLDR113 (Stucked HTC BootScreen.. Option for flashing not openning)

Did you flash Leo Radio 2.15 or higher and did you put in a SD card ?

@kinaar00: whoa.. if its necessary, how can I install that? Coz my phone is stucked on the bootscreen? Yes SD card is there...Im new in this kind of thing, can you help me out? Thanks.
Rico.

Dude, i had the same problem.
Just go to the tri-color screen where you will see SPL-2.08 HSPL
There, install the 2.15 radio by downloading it from this thread: http://forum.xda-developers.com/showthread.php?t=611787 (first link of them all in the first post)
Now, just in case, reinstall magldr 1.13, now install wp7. everything shall be fine
Thank you all xda-dev community! i'm really loving my hd2/7

Thanks dude... it works!
Sent from my HTC Desire using XDA App

[Q] No Bootloader Menu after reboot

Hi folks,
I tried to flash my HTC HD2 for the first time. Read /watched different guides. In first 2 steps they were all the same:
- install HSPL
- instal MAGLDR
Done both, got positive responses on both.
BUT: after rebooting after installing MAGLDR I do not manage to get the bootloader screen. There´s just a white screen with green htc logo on it and nothing else happens.
Yes, I held the power button after reboot; about 1 min long. Nothing.
If I hold volume down button after reboot the stripey screen appears like after the HSPL installation. But there is also no menu.
Also tried to proceeed task29 with the HD2 Android NAND Toolkit. Got positive response there too and after this I begann from scratch. With the same results.
Does anyone have a clue what I made wrong or forgot?
Or a hint what to do now?
best regards
M.

What version hspl n magldr?
Sent from my LG-P999 using XDA App

and radio,
hspl MUST be 2.08.hspl ONLY
radio MUST be 2.xx.50.xx

Got hspl version 2.08.hspl from http://forum.xda-developers.com/showthread.php?t=611433
got MAGLDR version 1.13 from http://forum.xda-developers.com/showthread.php?t=893618
cant remember the full radio version but I checked it before starting and it fits to requirements.
But I´m a few steps forward...
Meanwhile I flashed the newest Original HTC HD Win Mobile 6.5 ROM so phone boots up again
After that I installed HSPL version 2.08.0000 (now I know that was a failure) an tried again to install MAGLDR. But the progress bar doesn´t move - neither on PC nor on phone...
So I first will try to install again HSPL like samsamuel said and try again with MAGLDR
[EDIT]
Radio Version is now 2.15.50.14

SOLVED
Don´t know why but after dooing all step again (after falshing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other

MiMo99 said:
Don´t know why but after dooing all step again (after flashing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
Click to expand...
Click to collapse
the only regular hd2 stock rom that includes a magldr compatible radio is 3.14, so if the ''old rom'' you flashed was any other version, it will have also flashed a non magldr radio, which is why it happened. (I suspect).
Sorted now,

the same problem
Hi,
I have the same problem.
Just white screen with green HTC mark.
But I'm not shure how to flesh win mobile again, because I cannot connect my HTC HD2 via USB (PC doesn't recognise the phone).
tnx

Hey MiMo,
Could you please post links and steps to help myself and anyone else looking on how to fix this?
by links I mean can I have the stock rom you used and the radios and such
Thank you.