Database Users

[Q] Cannot enter MAGLDR ?

Hi !
I recently bought a HTC HD2 from a friend and I wanted to get rid of Winmo and install Android on this phone.
I started by flashing HARDSPL 2.08 on my phone using HSPL4 and it worked because when I go into the bootloader (The tri-color screen ?) I can see "SPL-2.08.HSPL" and "CotullaHSPL".
Then I performed a Task29 using the HTC HD2 Toolkit, I reboot my phone to the tri-color screen and then I tried to install MAGLDR.
And here is the problem, I cannot enter into MAGLDR ! On every video I have seen, people just power on their phone and after the HTC screen they get the MAGLDR menu, my phone just get stuck on the HTC Screen !
I don't know understand the problem, maybe I missed a step (I'm a noob ...), so if you can help, I'd be very thankful !
Haez

task29 erased the phone memory.
You should re-install HSPL 2.08, the correct Radio ROM, and then MAGLDR.

Thank you for your quick reply !
I'll try as you said and start at the beginning with re-installing HSPL 2.08, but what do you mean with "the correct Radio ROM" ?
[EDIT] I searched, and I found [/EDIT]
Thank you again !
Haez
[EDIT2] It worked ! I am in MAGLDR, thank you tictac0566 ! [/EDIT2]

Haez said:
Thank you for your quick reply !
I'll try as you said and start at the beginning with re-installing HSPL 2.08, but what do you mean with "the correct Radio ROM" ?
[EDIT] I searched, and I found [/EDIT]
Thank you again !
Haez
[EDIT2] It worked ! I am in MAGLDR, thank you tictac0566 ! [/EDIT2]
Click to expand...
Click to collapse
I´m glad it worked... sorry for my short answer, sometimes I tend to forget mentioning things which are "too normal" for myself.

[Q] No Bootloader Menu after reboot

Hi folks,
I tried to flash my HTC HD2 for the first time. Read /watched different guides. In first 2 steps they were all the same:
- install HSPL
- instal MAGLDR
Done both, got positive responses on both.
BUT: after rebooting after installing MAGLDR I do not manage to get the bootloader screen. There´s just a white screen with green htc logo on it and nothing else happens.
Yes, I held the power button after reboot; about 1 min long. Nothing.
If I hold volume down button after reboot the stripey screen appears like after the HSPL installation. But there is also no menu.
Also tried to proceeed task29 with the HD2 Android NAND Toolkit. Got positive response there too and after this I begann from scratch. With the same results.
Does anyone have a clue what I made wrong or forgot?
Or a hint what to do now?
best regards
M.

What version hspl n magldr?
Sent from my LG-P999 using XDA App

and radio,
hspl MUST be 2.08.hspl ONLY
radio MUST be 2.xx.50.xx

Got hspl version 2.08.hspl from http://forum.xda-developers.com/showthread.php?t=611433
got MAGLDR version 1.13 from http://forum.xda-developers.com/showthread.php?t=893618
cant remember the full radio version but I checked it before starting and it fits to requirements.
But I´m a few steps forward...
Meanwhile I flashed the newest Original HTC HD Win Mobile 6.5 ROM so phone boots up again
After that I installed HSPL version 2.08.0000 (now I know that was a failure) an tried again to install MAGLDR. But the progress bar doesn´t move - neither on PC nor on phone...
So I first will try to install again HSPL like samsamuel said and try again with MAGLDR
[EDIT]
Radio Version is now 2.15.50.14

SOLVED
Don´t know why but after dooing all step again (after falshing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other

MiMo99 said:
Don´t know why but after dooing all step again (after flashing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
Click to expand...
Click to collapse
the only regular hd2 stock rom that includes a magldr compatible radio is 3.14, so if the ''old rom'' you flashed was any other version, it will have also flashed a non magldr radio, which is why it happened. (I suspect).
Sorted now,

the same problem
Hi,
I have the same problem.
Just white screen with green HTC mark.
But I'm not shure how to flesh win mobile again, because I cannot connect my HTC HD2 via USB (PC doesn't recognise the phone).
tnx

Hey MiMo,
Could you please post links and steps to help myself and anyone else looking on how to fix this?
by links I mean can I have the stock rom you used and the radios and such
Thank you.

[Q] HD2 stuck at green HTC logo...tried everything

Hi, i ve read almost all topics here about the subject. this is what i've done so far:
i've succesfully installed
-hspl
-Radio Leo 2.15.50.14
-task29
-then MAGLDR111
then i was going to install an android nand version i found on the internet but my HTC got stuck on the green HTC logo screen.
i never get the bootloder menu. this is my problem.
Yes, I have leoimg.nbh in the root of my SD
After i put it there, i got an menu after reboot saying
'radio_v2
rcust
bootloader
splash1..'
press power to update...
but since this leoimg.nbh is my original windows image, it updates back to wm6.5
So anyone can help me how to pass this green screen please ?

try the links below, they might help

mengfei said:
try the links below, they might help
Click to expand...
Click to collapse
well it is just the shortcuts of what i've done already
i will probably wont be able to see the bootloader menu again..but thanks for the response

mmaniac said:
well it is just the shortcuts of what i've done already
i will probably wont be able to see the bootloader menu again..but thanks for the response
Click to expand...
Click to collapse
He says that to everyone, anyway.
First of all, not any HSPL will work. You need HSPL 2.08 for MAGLDR.
Second thing is, I suggest you use MAGLDR 1.13 (I still don't understand why people use the old, when there is a new)
Don't do Task29, it is useless. And now since you've installed winmo through sd card, you need to re-install HSPL (2.08), after that install MAGLDR (1.13).

[Q] Problem installing cKL/Magldr, Please Help!

Hello everyone,
I'm new here posting, but was reading XDA a lot .
I have a poblem that I cannot solve:
I have HTC HD2 and wanted to flash MIUI instead of stock OS.
I'm not new to custom ROM, and use custom ROMs on Motorola DEFY and Galaxy Ace.
For HD2 I used guide below:
http://forum.xda-developers.com/showthread.php?t=1402975
I was able to change SPL to 2.08 HSPL, but for some reason mine shows PB81110 HX-BC instead of PB81120 etc in top line and 0x40 instead of 0X50 in the bottom line.
Than I run Task 29 successfully. Than I've flashed cKL,1.4.0.1, it was 100% and looks good.
Than phone was supposed to boot to cKL menu and instead it stuck on HTC green letters logo on white screen.
I took battery out and tried press power button, no luck same HTC logo.
I went to three color screen, run Task 29 again and tried installing Magldr same thing says 100%, doesn't boot to Magldr screen, battery out, HTC logo and that's it. Tried multiple times, with different usb cables, nothing works. Didn't do stock back up, so cannot go back to stock, battery is getting low and I out of ideas.
Could someone PLEASE help, and explain what am I doing wrong? At this stage I'll be happy with any working ROM even stock.
Thank you so much in advance!!!

did you update teh radio? flash 2.15.50 from bootloader (stripey screen) and reboot, see if magldr appears.
Oh and stop task29ing, its not necessary.
PB81110 means it is a telstra version. (Same as regular version except for the 3g frequencies)

samsamuel said:
did you update teh radio? flash 2.15.50 from bootloader (stripey screen) and reboot, see if magldr appears.
Oh and stop task29ing, its not necessary.
PB81110 means it is a telstra version. (Same as regular version except for the 3g frequencies)
Click to expand...
Click to collapse
Thank you very much for prompt reply.
Hope it doesn't sound very annoying, but what is 2.15.50? I would appreciate just a reference or link to the right thread.
Edit: If this thread below is the correct , which one to pick?
http://forum.xda-developers.com/showthread.php?t=611787

the one that starts 2.15.50 would be the one. (the top one)

samsamuel said:
the one that starts 2.15.50 would be the one. (the top one)
Click to expand...
Click to collapse
@samsamuel: OK, that was a great help, thank you so much, after flashing 2.15.50 I've managed to install CWM via cLK. Much appreciated!
But problem again:
I've flashed tytung R14 kernel, than MIUI and it looks good, says congrats on the screen, but when I go to 'reboot system' in CWM it boots back to cLK screen looks like step 14 of this guide:
http://forum.xda-developers.com/showthread.php?t=1402975
I think I'm very close ( have CWM installed and able to flash kernel and MIUI), but obviously doing something wrong.
Is there any step I'm missing? Any ideas? Help please!

please use nand tookit
Sent from my HTC HD2 using xda premium

Hi!
My phone has the same problem. I think it has to do with corrupt internal memory blocks. I was able to flash a few times by altering system size partition, but now I can not flash clk on my phone anymore.
I ended up installing using magldr method, instead of clk. Use the hd2 toolkit to:
-Wipe task29
-Install magldr
-Magldr repartition (Usb flasher option in magldr)
-Install zip from sd card in ad recovery
I chose dataonext because I don't trust my nand memory.
Good luck!
Sent from my NexusHD2 using xda app-developers app

[Q] HTC HD2 stuck on HTC screen

Hi i have a htc hd2. when i power the phone up it stays on the htc screen and doesnt go an further. Please help
Thanks

hi! have you installed HSPL 2.08 and an os different form WM 6.5 or you have the stock rom?

lukes91 said:
hi! have you installed HSPL 2.08 and an os different form WM 6.5 or you have the stock rom?
Click to expand...
Click to collapse
hi im new to all this and i dont have a clue what you mean please can you explain

ok, don't worry, I'm here to try to help
so, let's start from the very beginning: HD2 comes with Windows Mobile 6.5, but there are several procedures and guides to flash different operative sistems like android... to help you, i need to know if your device is still running Windows Mobile or if you ever flashed a different os after installing HSPL, a bootloader and a custom recovery; if you don't understand what I'm talking about, i suggest you to read a guide like this one

lukes91 said:
ok, don't worry, I'm here to try to help
so, let's start from the very beginning: HD2 comes with Windows Mobile 6.5, but there are several procedures and guides to flash different operative sistems like android... to help you, i need to know if your device is still running Windows Mobile or if you ever flashed a different os after installing HSPL, a bootloader and a custom recovery; if you don't understand what I'm talking about, i suggest you to read a guide like this one
Click to expand...
Click to collapse
When i put the phone in boot mode (4 colours screen) it says 2.08 HSPL. Does this mean that there is HSPL installed?
I have also read another thread and it says you need to update the radio. Should i do that?

ok, if it says HSPL 2.08 by Cotulla it'r rooted, so you can try to perform a Task29 and to install again bootloader, recovery and rom, it should work!
which radio have you installed? if you have 2.15.50.14 and you have EUR HD2, it's fine as it's the best radio to install custom roms: it should see the biggest amount of ram available...
tell me if it helped, otherwhise I'm here

lukes91 said:
ok, if it says HSPL 2.08 by Cotulla it'r rooted, so you can try to perform a Task29 and to install again bootloader, recovery and rom, it should work!
which radio have you installed? if you have 2.15.50.14 and you have EUR HD2, it's fine as it's the best radio to install custom roms: it should see the biggest amount of ram available...
tell me if it helped, otherwhise I'm here
Click to expand...
Click to collapse
Hi thanks for all your help but I followed a guide on YouTube and it fixed it
Thanks for all your help

ok, the most important thing is that you can play again with your device
good afternoon!

habeeb2797 said:
Hi thanks for all your help but I followed a guide on YouTube and it fixed it
Thanks for all your help
Click to expand...
Click to collapse
Can you help me? My HD2 is also suspended htc screen.thanks

habeeb2797 said:
Hi i have a htc hd2. when i power the phone up it stays on the htc screen and doesnt go an further. Please help
Thanks
Click to expand...
Click to collapse
help me..........please.................

hoangmit said:
help me..........please.................
Click to expand...
Click to collapse
hi! can you provided me the infos i asked in previous posts? maybe i can help you

HD2 FAILED BOOT And FLASH ATTEMPTS
hey good day
im quite familiar with flashing roms and all that jazz
the last rom i had on my hd2 was a wp7.8 rom
one day i woke up it was stuck on magldr title screen
the menu didnt and couldnt come up
so i bit my tongue and returned to stock in efforts to reflash from scrach ...
now it stuck at the HTC logo , nothing i do gets it to work again
it boots to the bootloader mode it will accept flashing of anykind but it wont boot pass HTC , i even tried to manuall remove the HSPL and task 29 a million times , to no avail
help !!!
PS . it wont load a rom via SD

hi
I have a similar problem. I had android installed on SD, with multi-boot WM6.5. One day, the device went blank. I tried many ways and the farthest I got to was to have the original stock rom reloaded from SD (leoimg) and it stuck half way with no touch screen response to the input tests. I tried hard reset and install another rom and it went completely blank again. I could boot into tricolor but it displayed errors during the course of flashing any rom. I have HPSL 2.08 installed but not mgldr. Recovery was installed on SD.
In short, I am stuck at tricolor and unable to go any further. Cannot even install mgldr now.
Help please!
WS

lukes91 said:
ok, don't worry, I'm here to try to help
so, let's start from the very beginning: HD2 comes with Windows Mobile 6.5, but there are several procedures and guides to flash different operative sistems like android... to help you, i need to know if your device is still running Windows Mobile or if you ever flashed a different os after installing HSPL, a bootloader and a custom recovery; if you don't understand what I'm talking about, i suggest you to read a guide like this one
Click to expand...
Click to collapse
Hi... I have the same problem after i tried to install android on it.
And in boot mode (4 colors) it apears:
"PB1100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40 "
Please help me... I would like to instal on it Windows or Android.