Hi folks,
I tried to flash my HTC HD2 for the first time. Read /watched different guides. In first 2 steps they were all the same:
- install HSPL
- instal MAGLDR
Done both, got positive responses on both.
BUT: after rebooting after installing MAGLDR I do not manage to get the bootloader screen. There´s just a white screen with green htc logo on it and nothing else happens.
Yes, I held the power button after reboot; about 1 min long. Nothing.
If I hold volume down button after reboot the stripey screen appears like after the HSPL installation. But there is also no menu.
Also tried to proceeed task29 with the HD2 Android NAND Toolkit. Got positive response there too and after this I begann from scratch. With the same results.
Does anyone have a clue what I made wrong or forgot?
Or a hint what to do now?
best regards
M.
What version hspl n magldr?
Sent from my LG-P999 using XDA App
and radio,
hspl MUST be 2.08.hspl ONLY
radio MUST be 2.xx.50.xx
Got hspl version 2.08.hspl from http://forum.xda-developers.com/showthread.php?t=611433
got MAGLDR version 1.13 from http://forum.xda-developers.com/showthread.php?t=893618
cant remember the full radio version but I checked it before starting and it fits to requirements.
But I´m a few steps forward...
Meanwhile I flashed the newest Original HTC HD Win Mobile 6.5 ROM so phone boots up again
After that I installed HSPL version 2.08.0000 (now I know that was a failure) an tried again to install MAGLDR. But the progress bar doesn´t move - neither on PC nor on phone...
So I first will try to install again HSPL like samsamuel said and try again with MAGLDR
[EDIT]
Radio Version is now 2.15.50.14
SOLVED
Don´t know why but after dooing all step again (after falshing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
MiMo99 said:
Don´t know why but after dooing all step again (after flashing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
Click to expand...
Click to collapse
the only regular hd2 stock rom that includes a magldr compatible radio is 3.14, so if the ''old rom'' you flashed was any other version, it will have also flashed a non magldr radio, which is why it happened. (I suspect).
Sorted now,
the same problem
Hi,
I have the same problem.
Just white screen with green HTC mark.
But I'm not shure how to flesh win mobile again, because I cannot connect my HTC HD2 via USB (PC doesn't recognise the phone).
tnx
Hey MiMo,
Could you please post links and steps to help myself and anyone else looking on how to fix this?
by links I mean can I have the stock rom you used and the radios and such
Thank you.
Related
Hi,
Today I've tried to install android onto my HD2. After installing 'mgdlr' to my phone it stopped doing upgrades alltogether.
Mgdlr did install correctly but after the reset I only got that white HTC screen.
I know I have to press the power button really long etc etc (I've read the guide thoroughly).
Now, when I try to install anything it doesn't go any further than 0%. Not with any (official) ROM, radio etc.
I've done several hard resets, soft resets and re-installs but nothing gets past 0%.
Does anyone have any clue what happened and why I can't install a ROM and perhaps knows how to fix it?
What are you trying to install? An android rom? Are you going to the flashing mode in magldr? it's option 4 or 5, I think. Magldr was installed successfully? What radio do you have?
I was indeed trying to install an android rom. My radio version was/is 3.14.404.2
I never got to that mode. I've seen it in video's but mine doesn't. I only get that white screen with, in green letters, HTC on it. No matter how long I hold down the power button.
Btw, I said that magdlr installed succesfully because it installed without errors. But I think it's malfunctioning because it obviously isn;t doing what it's supposed to. Re-installing it isn't an option because it hangs at 0%
Did you try task29? might help with your upgrading issues.
VioL3nZ said:
I was indeed trying to install an android rom. My radio version was/is 3.14.404.2
I never got to that mode. I've seen it in video's but mine doesn't. I only get that white screen with, in green letters, HTC on it. No matter how long I hold down the power button.
Btw, I said that magdlr installed succesfully because it installed without errors. But I think it's malfunctioning because it obviously isn;t doing what it's supposed to. Re-installing it isn't an option because it hangs at 0%
Click to expand...
Click to collapse
Which NAND rom did you use?
You mean your radio is 2.14.404.2 right, not 3.14.404.2?
Also what is your SPL, it appears in the tri color screen/bootloader.
Kailkti said:
You mean your radio is 2.14.404.2 right, not 3.14.404.2?
Also what is your SPL, it appears in the tri color screen/bootloader.
Click to expand...
Click to collapse
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
VioL3nZ said:
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
Click to expand...
Click to collapse
if your spl is 2.08.0000, first, how did you get magldr to instal since it requires hspl? second, if you removed hspl after flashing magldr (hence 2.08.0000 and not 2.08.hspl as it should be), why?
enter bootloader, does it really say 2.08.0000?
You dont have to press the power button for 'really long' only about 5 seconds, so long as its the right 5 seconds, , , start the phone, first splashscreen appears, just as the first splashscreen is about to end, (after around 5/6 seconds) start pressing power, and keep it held till the magldr menu appears.
VioL3nZ said:
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
Click to expand...
Click to collapse
Mate, I need more info.
1. Your device version (branded or non branded?)
2. Your rom version before you start anything (stock or custom rom?, if stock, is it version 3.14 (the latest one)?)
3. Version of Android (NAND or SD Android?)
4. Are you planning to have dual boot WP7 and SD ANdroid?
5. Do you have HSPL installed?
The solution will depend on your answer on the above question
Cheers
Ive tried task29 but it does the same as any other update. It just wont let me flash anything, it keeps hanging at 0%
silverwind said:
Mate, I need more info.
1. Your device version (branded or non branded?)
2. Your rom version before you start anything (stock or custom rom?, if stock, is it version 3.14 (the latest one)?)
3. Version of Android (NAND or SD Android?)
4. Are you planning to have dual boot WP7 and SD ANdroid?
5. Do you have HSPL installed?
The solution will depend on your answer on the above question
Cheers
Click to expand...
Click to collapse
1. Its a non branded version
2. It was the latest stock rom
3. I was going for a NAND version
4. I wasnt planning on having a dual boot
5. I have the latest hspl installed (2.08.0000)
Additional info:
When running task 29, first it says From: image version:
To: image version: 2.0.00.00
And when I start the progress bars appear on both my comp and phone.
Afterwards it gave me a communications error.
VioL3nZ said:
1. Its a non branded version
2. It was the latest stock rom
3. I was going for a NAND version
4. I wasnt planning on having a dual boot
5. I have the latest hspl installed (2.08.0000)
Additional info:
When running task 29, first it says From: image version:
To: image version: 2.0.00.00
And when I start the progress bars appear on both my comp and phone.
Afterwards it gave me a communications error.
Click to expand...
Click to collapse
Ok. Let's start from the very beginning.
Find the CORRECT STOCK ROM first. You go to htc website and use your serial number to download the rom. Make sure your downloaded file is not corrupt.
Get micro sd and use PC to format it to fat 32.
Extract the stock rom and find file with the name: RUU_signed.nbh. Rename it to: leoimg.nbh.
Turn off the phone (make sure battery at least 50% capacity), put your micro sd.
Now, press the VOLUME DOWN BUTTON (don't release it), then press POWER ON button at the same time until white screen appear. Now, follow the on screen instruction.
If you succeed, check your spl by going into boot loader screen.
If your spl is other than spl 3.03, you can continue with next process. Installing SPL 3.03 HSPL.
Then, Do task 29. Then, flash radio 2.15.xx. Then install magldr 1.13.
All process can be done while in the boot loader screen.
If you succeed, you will be brought to mgldr screen. Select option no.5 (USB flasher) and press the green phone call button and connect it via USB, now run the NAND ANDROID you choose from your PC. If fails, retry the process from magldr screen and try different USB port. Also, make sure your anti virus, firewall, and Internet is turn off.
Good luck...
Thank you man, it worked!
I did everything you said and my phone is back up and running
Thanks!
VioL3nZ said:
Thank you man, it worked!
I did everything you said and my phone is back up and running
Thanks!
Click to expand...
Click to collapse
Glad you solved it
dear please help me too. i had wm 6.5 and android running on my hd2
i want to installa wp7 but when i want to update my radio it stucks at zero
i tried to put the LEOIMG.nbh and did as u said but it stucks at the white screen and says loading.... only
i cant uninstall hspl nor can i use the stock official rom to make my hd2 as normal.
pls help. thanks in advance
I read this thread http://forum.xda-developers.com/showthread.php?t=893620
about how to install android 2.2 on HD2, but I can not get MAGLDR 1.13 installed first. I downloaded the package and ran ROMUpdateUtility.exe, it says updating ROM verion 3.14.831.3 to 2.00.000.0, I proceed with next, then the phone went to 4-colour screen mode, shows SPL version is 3.03. Later on, it goes to black screen with only HTC logo the 0% progress bar on. Few minutes later, the installation on my computer said error[262], update error.
I wasn't sure if I need to downgrade the SPL to 2.08, as people said in this thread http://forum.xda-developers.com/showthread.php?t=829954 it does not matter.
My HD2 has the lastest rom listed on HTC - HongKong English support site.
Please advise what I need to do to get MAGLDR installed?
Thank you.
That thread is from before MAGLDR even existed. You need 2.08.HSPL to flash MAGLDR.
You can get all the info you need here .
Skellyyy said:
That thread is from before MAGLDR even existed. You need 2.08.HSPL to flash MAGLDR.
You can get all the info you need here .
Click to expand...
Click to collapse
Thanks for your reply.
I just got the HSPL4 and installed the 2.08.000, not 2.08 SPL on my HD2.
But when I tried to install the MAGLDR 1.13 again, it did the same thing again, it goes to black screen with only HTC logo the 0% progress bar on. Few minutes later, the installation on my computer said error[262], update error.
Any idea?
It seems I need to install 2.08 SPL, not 2.08.000 in HSPL4.
It works fine now.
u need 2.08HSPL and a 576mb ram radio..
Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?
when you install magldr it wipes windows off the deivce, you are aware of that?
when you start the device with magldr you need to hold the power off button til you get the menu up then you can use the usb flasher if it is a daf installer or you need to install CWM recovery and install a rom that way
either way windows will no longer be on your device
Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.
matze91 said:
Yeah I know this. But the problem is that the magldr bootloader is not booting. It hangs on the white HTC screen. Without any other reaction.
Click to expand...
Click to collapse
what version of android did you install? you need HSPL 2.08 or it will not work anways
if all you done was install magldr without install anything else it will do exactly as you have described because there is nothing for it to load up
I think you misunderstood me
Normally if magldr was installed correctly I should see a screen like this (http://www.xda-developers.com/wp-content/uploads/2011/02/MAGLDR-boot-menu.jpg), when I boot with hold power button+left arrow key.
But when I press this combination it does not boot to this screen. It just does nothing. And this is why I can´t proceed with any instruction, because I need a working magldr.
matze91 said:
Hey guys,
currently I´m trying to flash Android NAND on a HD2.
Apparently there are some problems with the bootloader.
I tried two different ways, which are explained in this thread:
http://forum.xda-developers.com/showthread.php?t=905060
First I tried to install MAGLDR 1.13. Here is the problem that MAGLDR 1.13 seems not to be properly installed because the phone wont boot in the MAGLDR bootloader. It just hangs at the green/white HTC bootscreen.
As second method I tried to flash cLK 1.4. Here the bootloader seems to be installed properly but it´s not possible to install the ClockworkMod Recovery. Every time I start the batch file it hangs on "waiting for device".
Since I tried some things I only can boot into the bootloader and no longer load Windows.
I´ve installed the latest radio (Radio Leo 2.15.50.14) and HSPL (3.03).
Any ideas what I can do know?
Click to expand...
Click to collapse
I'm new to all this too so bare with me.
I think you may have installed the wrong HSPL. This is from the HSPL thread.
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR
When you installed HSPL you chose the wrong option. Someone more knowlegable will hopefully come along and tell you how to fix it.
After destroying and downgrading of HSPL with an original HTC Win Rom I could install a new HSPL again...
Don´t ask me how I´ve done this, but it worked
So thanks to all!
Okay guys, am I screwed?
I tried putting android on this HD2.
I successfully installed HSPL 2.08 HSPL (So NO 2.08.0000)
Then I tried installing MAGLDR 1.13, just by executing the ROMUtilityUpdater.exe.
Clicked the first checkbox, then the 2nd, and then that 'Update' thingy.
It was going to updating from 1.72.XXXXX to 2.00.0.000 (or something)
I had it connected through Activesync (WinXP).
It was ready in 30seconds, instead of the normal 10 minutes.
Now it just hangs on the White HTC bootscreen.
I tried doing a Task29, but in the RGB Bootloader (USB connected) screen it won't connect to ActiveSync. I Ran it anyway, but still no Windows or MAGLDR.
Do I need to install a different Radio? If so how do I do that and where can I find it?
I am downloading a stock WinMo 6.5 Rom (vodafone branded, from HTC.com)
Thanks for all the help in advance!
had simillar problem. I would just install the latest Windows ROM 3.03 but thru SD card (Download official 3.03 ROM for Your phone, extract it, change the nbh file name to LEOIMG, put it on Your SD card, Switch the phone on holding volume button down, and then go with the instructions on the screen) cuz it changes Your SPL, then install HSPL 4. After that install CLK and CLOCKWORK and then NAND Your device with clk version android.
Look here http://forum.xda-developers.com/showthread.php?t=1021837 if You dont know how to install clK. It is a bit complicated but if You are a bit computer literate You should be ok.
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
wouternet said:
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
Click to expand...
Click to collapse
Hi,
Go HERE
Stock ROMS always save the day haha
Thanks brother
All HTC phones have tiny screws which helps the body stay together. So yes every HTC phone is Screwed
Hi guys. Thanks everyone for the wonderful work you all do.
Today I wanted to try for the first time to flash some NAND stuff.
I installed cLK, then I thought it would have been better MAGLDR so i tried to install it just after cLK.
After the installation, the phone just does not show the MAGLDR boot screen. It stucks at the HTC green logo (of course i keep the power button pressed). The previous working WM rom does not boot.
The only solution i found, is to flash again a wimo rom through ruu_update, from the bootloader (i have hspl4), then I can begin again but MAGLDR will anyway not install properly.
Do you have any suggestion? Thanks.
Sounds like yet another case of not having both spl 2.08.hspl AND an android compatible radio. (2.15.50 for example)
as comes up daily, magldr WILL NOT START without both those criteria filled. It will simply hang on the bootscreen.
thanks for the info.
I had Spl 3.03, I understood that MAGLDR would require 2.08 or above. Radio, is exactely the 2.15.50. What should i do now?
wrong, magldr requires 2.08.hspl ONLY. no other will work.
from magldr thread, post 1 line 4......
You need HardSPL 2.08 before installation!
Click to expand...
Click to collapse