Database Users

Issues with flashing HSPL on my Leo

Hi,
I wanted to port Android on my Leo and I have issues with flashing the HSPL first (I was using the Gold Card method to flash new FW so far).
I have downgraded to 1.66 with SPL 1.42, then I tried to HSPL my device with using HSPL3_PKG.exe from XDA. When I start the .exe the phone goes into Bootloader showing first Serial, then USB(I installed the HTC USB drivers per installing HTC Sync), the program allows me to flash 2.08 HSPL and then the flash starts as the status bar moves from left to right constantly but nothing happens on the device, even not after 10 Minutes, I pull off my Leo and it boots fine but no HSPL flash, I am still on SPL 1.42. What am I doing wrong? (I am using Parallels on a MAC btw).
Any comments?
Thanks

Any able to help?

L2C said:
Hi,
I wanted to port Android on my Leo and I have issues with flashing the HSPL first (I was using the Gold Card method to flash new FW so far).
I have downgraded to 1.66 with SPL 1.42, then I tried to HSPL my device with using HSPL3_PKG.exe from XDA. When I start the .exe the phone goes into Bootloader showing first Serial, then USB(I installed the HTC USB drivers per installing HTC Sync), the program allows me to flash 2.08 HSPL and then the flash starts as the status bar moves from left to right constantly but nothing happens on the device, even not after 10 Minutes, I pull off my Leo and it boots fine but no HSPL flash, I am still on SPL 1.42. What am I doing wrong? (I am using Parallels on a MAC btw).
Any comments?
Thanks
Click to expand...
Click to collapse
This should answer all of your questions :
http://forum.xda-developers.com/showthread.php?t=611433
I recommend upgrading your SPL to 2.08 as I have flashed HSPL 2.08 and haven't had any problems whatsoever in the past 4-5 months of having this phone. First time installation worked like a charm

maff1989 said:
This should answer all of your questions :
http://forum.xda-developers.com/showthread.php?t=611433
I recommend upgrading your SPL to 2.08 as I have flashed HSPL 2.08 and haven't had any problems whatsoever in the past 4-5 months of having this phone. First time installation worked like a charm
Click to expand...
Click to collapse
Hi
thanks, I read trough all this, and tried to work with all three HSPL Versions, but I still don't get it work...
I just tried to run HSPL3_PKG.exe, when I choose SPL 2.08.0000 and run it, the program starts, I choose SPL 2.08.000 and then it starts, the bar moves from left to right, but nothing happens on the phone...

Got it to work finally! It just wouldn't work on my Windows XP via Paralells on a MAC, I used a Windows 7 Machine, all good now, my Leo is HSPL 2.08 and got a NAND Android OS on it...finally a phone that one can use now

[Q] Can't flash stock rom after flashing MAGLDR

Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated

Abagnale said:
Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Click to expand...
Click to collapse
While your Pbone is off hold the volume down button and momentaraly press the power (end) button this should make the bootloader come up (tri color screen). Once in bootloader plug your USB cable into the computer and phone. wait until you see USB in the white bottom bar of the phone screen and then run the RUU or exe wich ever one you have for the ROM you want to flash, this is for Windows Mobile ROMs only though.
If you want you can use a micro SD card to flash the ROM also. You need a 4G or smaller SD card to do this though the 16GB card that comes with the TMOUS HD2 generaly will not work but you can try it. Take and find the RUU_signed.nbh file in the Rom folder you have, it may not look exactly like that but it will have RUU and .nbh in it. Rename the file leoimg.nbh and copy it to your SD card and repeat the process to go into bootloader and as soon as you see searching appear on your phone screen release the volume up button and the ROM will flash it just might take alittle longer for the ROM to complete the flash this way as compared to using a computer to flash.

Thank you for you reply After several attempts I managed to get my winmo back on
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!

Abagnale said:
Thank you for you reply After several attempts I managed to get my winmo back on
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!
Click to expand...
Click to collapse
Yes you lost MAGLDR, HSPL, and CMR when you flashed the stock ROM. If bootloader is showing SPL 3.O3.OOOO then you are stock once again You can always be double sure of this by downloading HSPL 4and run it, when it ask you what version you want to install select 3.03.0000. The ones with SPL and the x.xx.0000 are all stock SPLs but 3.03.0000 is the latest stock SPL.

Thanks you've calmed me down

Abagnale said:
Thanks you've calmed me down
Click to expand...
Click to collapse
You are very welcome,happy to be of help.

Appreciation
Thanks so much for the 4g micro sd card suggestion. I was really starting to think I'd stuffed my phone. I had been trying to flash a stock rom using a 16g micro sd card & of course having no luck. So glad I found this thread, keep being a superhero

[Q] No Bootloader Menu after reboot

Hi folks,
I tried to flash my HTC HD2 for the first time. Read /watched different guides. In first 2 steps they were all the same:
- install HSPL
- instal MAGLDR
Done both, got positive responses on both.
BUT: after rebooting after installing MAGLDR I do not manage to get the bootloader screen. There´s just a white screen with green htc logo on it and nothing else happens.
Yes, I held the power button after reboot; about 1 min long. Nothing.
If I hold volume down button after reboot the stripey screen appears like after the HSPL installation. But there is also no menu.
Also tried to proceeed task29 with the HD2 Android NAND Toolkit. Got positive response there too and after this I begann from scratch. With the same results.
Does anyone have a clue what I made wrong or forgot?
Or a hint what to do now?
best regards
M.

What version hspl n magldr?
Sent from my LG-P999 using XDA App

and radio,
hspl MUST be 2.08.hspl ONLY
radio MUST be 2.xx.50.xx

Got hspl version 2.08.hspl from http://forum.xda-developers.com/showthread.php?t=611433
got MAGLDR version 1.13 from http://forum.xda-developers.com/showthread.php?t=893618
cant remember the full radio version but I checked it before starting and it fits to requirements.
But I´m a few steps forward...
Meanwhile I flashed the newest Original HTC HD Win Mobile 6.5 ROM so phone boots up again
After that I installed HSPL version 2.08.0000 (now I know that was a failure) an tried again to install MAGLDR. But the progress bar doesn´t move - neither on PC nor on phone...
So I first will try to install again HSPL like samsamuel said and try again with MAGLDR
[EDIT]
Radio Version is now 2.15.50.14

SOLVED
Don´t know why but after dooing all step again (after falshing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other

MiMo99 said:
Don´t know why but after dooing all step again (after flashing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
Click to expand...
Click to collapse
the only regular hd2 stock rom that includes a magldr compatible radio is 3.14, so if the ''old rom'' you flashed was any other version, it will have also flashed a non magldr radio, which is why it happened. (I suspect).
Sorted now,

the same problem
Hi,
I have the same problem.
Just white screen with green HTC mark.
But I'm not shure how to flesh win mobile again, because I cannot connect my HTC HD2 via USB (PC doesn't recognise the phone).
tnx

Hey MiMo,
Could you please post links and steps to help myself and anyone else looking on how to fix this?
by links I mean can I have the stock rom you used and the radios and such
Thank you.

[Q] Problem staying connected NAND while magldr downgrading to 2.0

hi all,
we are trying to put android on a HD2 but i work work because we get disconnected from the moment i start downgrading the phone to 2.0.
anyone got a clue to fix this lil problem ?
regards Remon and Teymur

i THINK what you mean is downgrading to spl 2.0??? if i'm correct what you want to downgrade to is actually Hspl 2.08 (if on a USA branded HD2 with 1024 nand and red/green call/end buttons) CHANGING TO HSPL MUST BE DONE FIRST (only the radio can be flashed before)
i can't remember what Hspl is for the EU Leo ... Hspl 3.x ... i believe.
hope i helped. cheers

reply
rubledub said:
i THINK what you mean is downgrading to spl 2.0??? if i'm correct what you want to downgrade to is actually Hspl 2.08 (if on a USA branded HD2 with 1024 nand and red/green call/end buttons) CHANGING TO HSPL MUST BE DONE FIRST (only the radio can be flashed before)
i can't remember what Hspl is for the EU Leo ... Hspl 3.x ... i believe.
hope i helped. cheers
Click to expand...
Click to collapse
we are running spl 3.03.0000 now and we need to get it to hspl 2.08 i believe in order to do magldr so we can actually install android on it.
but the usb disconnects we we try magldr to get it to hspl 2.08,
so we probably need an alternative way.
got any clues ?

you need to flash hspl before magldr via bootloader (tri-color screen) then flash mad, etc

Phone off
Into bootloader
Connect USB
run Hspl4 ... make sure you choose 2.08.hspl only
When it reboots go straight back into bootloader
USB
Run magldr installer (no need to change radio if you were running 3.14 rom cos radio will already be fine (((previous post that said radio can be flashed without hspl is wrong)))
When it reboots it will start magldr menu
Choose USB flasher
Use nand toolkit to apply partitioning your target rom requires-this step will also apply cwm (clockwork)
Restart into magldr, option 8 ad recovery
In cwm recovery choose advanced partition SD card (assuming you want an ext partition to increase internal storage,)
Back into cwm mounts and storage, mount SD card, copy across the new rom.zip
In cwm choose flash zip from SD
That's it.

oh, thanks sam. i wasnt sure if anything could be flashed before or not. i knew radio had something special about when it can be flashed, like it needed to be flashed first (if need be) right?

rubledub said:
oh, thanks sam. i wasnt sure if anything could be flashed before or not. i knew radio had something special about when it can be flashed, like it needed to be flashed first (if need be) right?
Click to expand...
Click to collapse
if you were starting from stock, the radio would either be the second or third thing you flashed, , HSPL first, then magldr and radio in either order.
magldr simply wont start 'till the radio (and hspl) are correct.

Rom not booting, only magldr, need to get back to stock

Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!

irteza_h said:
Hi .... I had an hd2 for some time which got kept in the locker for too long..The status as of now is like this.
1. MIUI ROM installed on NAND doing bootloops
2. SD Card formatted .. so no recovery
3. Trying to use magldr usb storage disconnects the phone
4. Can get into the red yellow green screen with status showing usb but when i try to run a stock rom it cannot find the device.
Magldr 1.13 is still running and I have hspl 2.08
Is there any way i can get back the stock firmware installed? Any help will be appreciated. thanks!!
Click to expand...
Click to collapse
Have you tried flashing a stock ROM from the SD card? The procedure is outlined here, it doesn't seem too hard. Since you can't connect in MAGLDR use an SD card reader to copy the stuff across.

why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok

clio94 said:
why no recovery; recovery in magldr 1.13 is stored in nand.So you can go magldr--->ad recovery and run recovery.then wipe all userdata and see if your rom starts again working ok
Click to expand...
Click to collapse
I tried to go to recovery AD ... It says that boot sources could not be found..

irteza_h said:
I tried to go to recovery AD ... It says that boot sources could not be found..
Click to expand...
Click to collapse
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.

Nigeldg said:
Well, you say it doesn't connect to the PC but what about in MAGLDR? As in the USB flasher? If it does, just flash a new version of CWM (probably through the NAND Toolkit).
If that doesn't work, try a stock ROM from the SD Card and start over.
Click to expand...
Click to collapse
I was trying to use the USB Flasher earlier and the installation would fail halfway through with various errors.. Tried with 4 different roms.. So decided to do a stock rom from sdcard .. tried a WWE and got an error 28002...couldnt get into magldr even now... Anyways got Task29 ..booted in the red yellow green screen and doing a wipe+hspl+magldr+recovery. As of now it stuck on 0% at the wipe process but it does say 10 minutes for flashing and its been only 2. Lets see.....

Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??

irteza_h said:
Ok the situation as of now is this... Tried installing a stock rom which gave me spl 3.03 ... Magldr no longer working. Task 29 fails to install anything. Trying to install a stock ruu.exe from the rgb screen tells me that the update utility cannot be used for my phone.
Any ideas??
Click to expand...
Click to collapse
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.

The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.

Nigeldg said:
So now in the bootloader it says that you have SPL3.03 rather than HSPL 2.08 right? In that case, maybe try reflashing HSPL then MAGLDR etc. because these won't flash unless you have HSPL. I assume that your main aim is to go back to Android after you've sorted this out anyway.
Click to expand...
Click to collapse
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
Daycrawler said:
The way I see it - get HD2 toolkit http://forum.xda-developers.com/showthread.php?t=1090783
Install HSPL 2.08 like Nigeldg said and flash magldr or clk anew. I personally use clk 1.5 and it's childlishly easy to use and I had absolutely no prolems. I attached a zipped .nbh file you can flash after HSPL from HD2 toolkit. It's a new clk with recovery. It's obviously not mine, but I can't remember the thread I got it from (I keeep it just in case since downloaded). You can repartition from your phone then and install whatever ROM you need from recovery. The only problem can be flashing HSPL - if this doesn't go well you'd have to do it from SD like someone suggested.
Click to expand...
Click to collapse
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....

irteza_h said:
I would but on the hd2 toolkit while installing hspl its mentioned tht it will only work uptil spl 2.10
I got the nbh file on the recovery ...but while restarting the phone with the volume button pressed it says "0028002 Not Allow " and returns me back to the rgb screen.... i am in the uae...(Middle East) and i am trying to install the WWE Asia ROM from the htc website. I tried downloading the WWE GCC rom from shippedroms.com but that one is corrupted.....
Click to expand...
Click to collapse
Yeah don't use the HD2 toolkit, go to the HSPL thread and download the HSPL4 package from there. Just select HSPL2.08 and flash it. The toolkit uses the older HSPL3 package if I'm not mistaken.