Related
OK, please try to help me.
I'm having trouble in changing the SPL in my Leo.
I have installed WRONGLY SPL 2.08 instead of HSPL 2.08 by DFT HSPL3
Since this made me unable to install MAGLDR, i tried idiotic idea to install the newest stocking ROM from htc site (Serial confirmed) with htc installer from windows.
Right now, i have working HTC with details as below:
ROM: 3.14.479.2 (04666) WWE
RADIO: 2.15.50.14
SN: HT03DNW00564
When i get into bootloader, there is:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So, time for the problem:
Right now, i can't load anything to my device. When i put LEOIMG onto SDCard, device freezes on white screen with "Loading". I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.405.2
When i try to load another SPL (or HSPL) from DFT HSPL4 device reboots, goes to bootloader and nothing happens. DFT HSPL just shows progres bar moving and nothing happens (i have waited 20 mins).
I have no more ideas anymore, what can i do. Hopefully Phone works, and those not have any Cooked ROM on it, but i don't wont to use this ROM
PLEASE, try to help...
PS. I have tried different USB Ports, i have installed fresh Windows (really). I'm using XP SP3. Battery is at 100%.
Try running a task 29 and then run the HSPL again and install the 2.08 HSPL. Then flash MAGLDR then the ROM you want.
Edit: Sorry I momentarly forgot you have to have HSPL to do a task 29. Do this make sure your phone is in bootloader and plug it into the computer via USB cable and then wait until it says USB at yhe bottom in the white. Then and only then run the DFT HSPL again.
With Task29 also nothing happens. Same as with ROMS and HSPL, After synchro in ActiveSync, i have run TASK29, then my Leo goes into Bootloader and nothing happend. On Windows screen i have 0% progress bar, on HTC HD2 i see bootloader with USB status.
ERROR 302
EDIT: After clicking through recovery steps, Leo turned to showing Progres bar, but also stops at 0%.
RealWaaagh said:
Right now, i can't load anything to my device. When i put LEOIMG onto SDCard, device freezes on white screen with "Loading". I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.479.1
Click to expand...
Click to collapse
Just making sure: did you try to flash those stock roms over USB? Stock SPL's don't have the same protection that HSPL has, and can be overwritten by flashing over USB just fine.
Also: until you're sure you can reflash at least something, it might be better to stay away from task29
I tried also by USB (all three), and still the same. Progress bar on PC and Phone shows 0% and after some time, Installer shows ERROR about connection. ERROR302 i think.
PS. I really start to think i'm missing some detail. ROM works, everything works excluding boot loader. For me, it looks like bootloader is broken somehow, and i don't have idea how to make it work properly.
RealWaaagh said:
I tried also by USB (all three), and still the same. Progress bar on PC and Phone shows 0% and after some time, Installer shows ERROR about connection. ERROR302 i think.
PS. I really start to think i'm missing some detail. ROM works, everything works excluding boot loader. For me, it looks like bootloader is broken somehow, and i don't have idea how to make it work properly.
Click to expand...
Click to collapse
Hmm... If you can't get your phone to flash anything over either USB or SD, it does sound like your bootloader might be corrupted or something. That 302 error also doesn't sound good.
I guess if you have them you could try flashing using:
- a different pc/laptop
- a different SD card (perhaps a goldcard?)
*Probably* won't help, but won't make things worse either.
Ok, for today i have enough. I will try tomorrow with another PC.
SD Cards i already tried three of them.
RealWaaagh said:
OK, please try to help me.
I'm having trouble in changing the SPL in my Leo.
I have installed WRONGLY SPL 2.08 instead of HSPL 2.08 by DFT HSPL3
Since this made me unable to install MAGLDR, i tried idiotic idea to install the newest stocking ROM from htc site (Serial confirmed) with htc installer from windows.
Right now, i have working HTC with details as below:
ROM: 3.14.479.2 (04666) WWE
RADIO: 2.15.50.14
SN: HT03DNW00564
When i get into bootloader, there is:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So, time for the problem:
Right now, i can't load anything to my device. When i put LEOIMG onto SDCard, device freezes on white screen with "Loading". I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.405.2
When i try to load another SPL (or HSPL) from DFT HSPL4 device reboots, goes to bootloader and nothing happens. DFT HSPL just shows progres bar moving and nothing happens (i have waited 20 mins).
I have no more ideas anymore, what can i do. Hopefully Phone works, and those not have any Cooked ROM on it, but i don't wont to use this ROM
PLEASE, try to help...
PS. I have tried different USB Ports, i have installed fresh Windows (really). I'm using XP SP3. Battery is at 100%.
Click to expand...
Click to collapse
Mate, you said that you flashed stock rom v.3.14.xxx but you also said that the SPL 2.08.
I m quite confused, usually the stock rom v.3.14 contains SPL 3.03 (not 2.08). So, I m curious what version of your hd2, is it TMOUS?
Have you tried a HARD RESET?
Try HR and see whether your hd2 can pass that.
If succeded, you can retry flashing HSPL over usb (dont forget to turn off antivirus, firewall, internet on your pc) or else retry flashing via micro sd flashing (use 2,4 or 8 gb reformated micro sd)
hope you can succeed.
good luck
When i try to load another SPL (or HSPL) from DFT HSPL4 device reboots, goes to bootloader and nothing happens.
Click to expand...
Click to collapse
forget starting with the phone already running, it doesnt need to connect to activesync, that just adds a load of confusion, saying that in all the instructuons.
phone off
phone into bootloader
usb
hspl4
choose 2.08.hspl
bootloader
flash rom
I have tried stock roms: 1.48.479.1; 3.14.479.2(same as installed); 1.48.405.2
Click to expand...
Click to collapse
so thats two east europe and a wwe rom, , you dont have hspl installed, , and you're unsure why nothing will flash?
cancel this post
RealWaaagh said:
Ok, for today i have enough. I will try tomorrow with another PC.
SD Cards i already tried three of them.
Click to expand...
Click to collapse
One more question are you right clicking and running HSPL as administrator???
samsamuel said:
forget starting with the phone already running, it doesnt need to connect to activesync, that just adds a load of confusion, saying that in all the instructuons.
phone off
phone into bootloader
usb
hspl4
choose 2.08.hspl
bootloader
flash rom
so thats two east europe and a wwe rom, , you dont have hspl installed, , and you're unsure why nothing will flash?
Click to expand...
Click to collapse
I have already tried to start hspl4 without running WinMo, same effect. In WinXP Bootloader still displays on the Phone, and in DFT HSPL progres bar just bounce from left to right.
In Vista DFT HSPL returns critical error about connection.
About ROMS, 3.14 is East Europe (downloaded from HTC after checking serial) and 1.48 is WWE, also checked with serial from HTC site.
I have tried 1.48 EE since somewhere i have read, taht i have to get rom with the same number on the end, as installed (ie. 3.14.479."2")
PS. I can't tconnect to Mobile Center is Vista. With ActiveSync on WinXP there are no problems.
silverwind said:
Mate, you said that you flashed stock rom v.3.14.xxx but you also said that the SPL 2.08.
I m quite confused, usually the stock rom v.3.14 contains SPL 3.03 (not 2.08). So, I m curious what version of your hd2, is it TMOUS?
Have you tried a HARD RESET?
Try HR and see whether your hd2 can pass that.
If succeded, you can retry flashing HSPL over usb (dont forget to turn off antivirus, firewall, internet on your pc) or else retry flashing via micro sd flashing (use 2,4 or 8 gb reformated micro sd)
hope you can succeed.
good luck
Click to expand...
Click to collapse
My Phone is East Europe WWE (afaik).
I have installed SPL 2.08 onto HSPL 1.6 with DFT HSPL3.
Then i have installed 3.14 by USB. I don't know, why i still have SPL2.08 if you say i should't.
HR works fine.
In a minute i will check HSPL with internet turned off.
How to flash HSPL via microSD ?
Since i can't flash whole ROMs (maybe i have wrong ones, but they pass serial check on htc.com) from microSD (3 cards checked 2GB SD, 4 GB SDHC(don't work), 16 GB SDHC)
T-Macgnolia said:
One more question are you right clicking and running HSPL as administrator???
Click to expand...
Click to collapse
When i try run in Vista, i click and run it as Admin, but in XP i have Admin Account, so i just run it.
PS. Sorry for three posts, i didn't see multiple-quote option
RealWaaagh said:
When i try run in Vista, i click and run it as Admin, but in XP i have Admin Account, so i just run it.
PS. Sorry for three posts, i didn't see multiple-quote option
Click to expand...
Click to collapse
Doesn't matter, still right click and run as admin, always put phone in bootloader yourself before starting to flash, if it fails just run hspl.exe again. Try all USB ports.
No, you can't apply hspl from SD card.
samsamuel said:
Doesn't matter, still right click and run as admin, always put phone in bootloader yourself before starting to flash, if it fails just run hspl.exe again. Try all USB ports.
No, you can't apply hspl from SD card.
Click to expand...
Click to collapse
PROBLEM SOLVED
I needed to make another admin account in WinXP. And then use it by Run As (then choose this new account).
I don't know why it works like that, but it worked.
Just to give all informations.
After more testing, i detected my Computer problem. My USB ports were not working properly, and update of Motherboard BIOS helped (ASUS P7P55D). So, i don't know what was the exact issue of problems.
Hi there,
I've bought my HTC Leo 1 week ago and I want to install Android on it. I'm following the steps of this post but it's a little hard if you haven't flash a cell phone ever
The thing is that my cell phone has SPL 3.03.0000, but I need HSPL 1,2 or 3, So I need to downgrade the SPL to use the right HSPL.
Does anyone know how to downgrade the SPL? If I understood right I need to flash a new ROM of win mo 6.5 in my cell phone with the right spl, but I don't know where to find it.
Thanks!
Search for HSPL2 or HSPL3.
You actually need HSPL4 AFAIK. Just search for HSPL4 then download etc. Then go in to bootloader and run the .exe found in the file you've downloaded. Click through the steps and you'll get to a screen with a drop down menu, choose 2.08.HSPL from the menu. Then just click next and it'll flash.
Sent from my HTC Vision using XDA App
Skellyyy said:
You actually need HSPL4 AFAIK. Just search for HSPL4 then download etc. Then go in to bootloader and run the .exe found in the file you've downloaded. Click through the steps and you'll get to a screen with a drop down menu, choose 2.08.HSPL from the menu. Then just click next and it'll flash.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
then I need HSPL4. I just saw this post and it says "Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03. You need HSPL2.08 to run Android / WP7 / MAGLDR." So, among all the HSPL releases, the only one that doesn't work is the 3.03? If that's right the HSPL4 should work, I'll give it a try
Oh, I just see this post and it says "You must have hspl 2 or 3 for android to run well please use HSPL GUIDE" . Is there any problem with HSPL4 of the guide is old?
It won't matter. All HSPL4 does is flash 2.08.HSPL to bootloaders that have SPL 3 and up as the older versions are compatible with older SPL's (bootloader).
Sent from my HTC Vision using XDA App
Well, I have another problem now
I'm following this steps to put HSPL4:
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL4.exe from your pc and read all the text carefully
4. When finished reading click next in the HardSPL program
I connect my phone to the PC, and the Windows Mobile center pops out, but when I go to the ActiveSync on my phone it says that I should install the ActiveSync software in my pc (I don't know why but I can't install ActiveSync on my pc, it says that my software is uncompatible (Windows 7, 64 bit), I read that WMDC is used in W7 instead of ActiveSync). So I executed the HSPL4 (phone conected) and wait 5 minutes, and it didn't find the USB conection of my phone with my pc :/
Anyone had this problem or know any alternative? :/
Thanks!
Done, I use the "NOTE: You can also install HARDSPL by entering Bootloader mode manually, then running the HSPL4.exe program once you see 'USB' at the bottom of the tri-colour screen.". I didn't saw it
Haha I was just about to say that. It's actually better if you run it straight from HSPL.
So are you all flashed now or what?
Skellyyy said:
Haha I was just about to say that. It's actually better if you run it straight from HSPL.
So are you all flashed now or what?
Click to expand...
Click to collapse
I just flashed it and now I have to install the Radio, but I have the same problem (in the steps it says that I need to be connected by activeSync)
I think I will try again from the Bootloader mode manually, what do you say?
Edit: In this post says that the radio have to be installed before the rom, but in this one it says the opposite.
(I'm a little lost )
Install everything from the bootloader. They;ll all flash correctly from there.
Install the radio before the ROM. Make sure you flash 2.15.50.14 then flash MAGLDR and flash away!
mm, I downloaded the radio 2.15.50.14 but when I execute the CustomRUU and the phone is conected in Bootloader mode it doesn't recognize the phone :S
I can't figure out any solution... what a thing...
PD: Now it shows SPL-3.03.HSP in the bootloader screen, so that's ok
Actually no that's the reason why its not okay. You flashed the wrong HSPL. Just go back to bootloader, open up HSPL4 and when you get to a drop down menu chose 2.08.HSPL from the menu. That's the one you need. Flash that, then reflash the radio and it will flash properly.
Sent from my HTC Vision using XDA App
i don't know
christian.patella said:
i don't know
Click to expand...
Click to collapse
Thank you for the useful post...
Sent from my HTC Vision using XDA App
Oh, I've just realized one thing.. In this post says:
★STEP 2★
Prepare your device
windows rom - windows rom has been linked with issues within the android builds so for the first time im going to compile a list of working roms here that have no issues within android
i have been using ChuckyROM GTX + CHT 1.8.5 - 23128 from the start of android development and have yet to have an issue below is a list of other roms and links that are working well with android :-
BARE BONES WM ROM FOR ANDROID BY NRGZ28
[ROM][WWE]★★★Astraios Roms★★★[REG/BUUF/GTX][23569][22nd July]
ELEGANCIA ROM Series™
ChuckyROM GTX + CHT 1.8.5 - 23128 ~ 2.10.1
¸¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ | 21911||23129 * Sense 2018
★★★ PLEASE LEAVE LINKS AND INFORM ME OF ANY ROMS YOU HAVE TRIED AND HAD NO ISSSUES ★★★
FOR INFORMATION ON HOW TO FLASH A ROM PLEASE GO TO FLASHING GUIDE.
That means I have to install another windows rom before the android one?
PD: When I installed the HSPL 3.03.0000 (by mistake) and then the 3.03.HSPL, in both cases it shows ''We hacked it!'', but I just install the 2.08.HSPL and it didn't show anything, it just said ''Succesfully done'', is that ok? . Edit: The phone displays the right version of SPL, i'll try with the custumRUU in a moment
I'm waiting for the answer I'm afraid of running the customruu without haven't changed the WM Rom (That step is't very clear for me )
If you have 2.08.HSPL on your phone all you need to do now is flash MAGLDR from the RUU. You don't need a custom WinMo ROM if you have the correct radio etc. as MAGLDR will over-write WinMo anyway.
So basically if your phone is saying 2.08.HSPL just go back to the bootloader and flash the MAGLDR RUU.
Help please
dami_rz said:
Help please
Click to expand...
Click to collapse
I have.
Okay guys, am I screwed?
I tried putting android on this HD2.
I successfully installed HSPL 2.08 HSPL (So NO 2.08.0000)
Then I tried installing MAGLDR 1.13, just by executing the ROMUtilityUpdater.exe.
Clicked the first checkbox, then the 2nd, and then that 'Update' thingy.
It was going to updating from 1.72.XXXXX to 2.00.0.000 (or something)
I had it connected through Activesync (WinXP).
It was ready in 30seconds, instead of the normal 10 minutes.
Now it just hangs on the White HTC bootscreen.
I tried doing a Task29, but in the RGB Bootloader (USB connected) screen it won't connect to ActiveSync. I Ran it anyway, but still no Windows or MAGLDR.
Do I need to install a different Radio? If so how do I do that and where can I find it?
I am downloading a stock WinMo 6.5 Rom (vodafone branded, from HTC.com)
Thanks for all the help in advance!
had simillar problem. I would just install the latest Windows ROM 3.03 but thru SD card (Download official 3.03 ROM for Your phone, extract it, change the nbh file name to LEOIMG, put it on Your SD card, Switch the phone on holding volume button down, and then go with the instructions on the screen) cuz it changes Your SPL, then install HSPL 4. After that install CLK and CLOCKWORK and then NAND Your device with clk version android.
Look here http://forum.xda-developers.com/showthread.php?t=1021837 if You dont know how to install clK. It is a bit complicated but if You are a bit computer literate You should be ok.
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
wouternet said:
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
Click to expand...
Click to collapse
Hi,
Go HERE
Stock ROMS always save the day haha
Thanks brother
All HTC phones have tiny screws which helps the body stay together. So yes every HTC phone is Screwed
First, sorry if I post the kind of question that has been already asked 1000 times, I'll understand if my post is deleted.
here is the story: I still have an HD2, but got a Sensation almost one year ago.
Now my HD2 is still WinMo 6.5 with Android from the SD card.
Yesterday, one of my pupils (yes, I'm a teacher, and my pupils know I'm into smartphones....!) gave me his HD2 because his father kinda bricked it.
I haven't been using my HD2 or reading XDA HD2 section or a long time (I'm too busy flashing my Sensation, so reading Sensation threads ), but I thought I could give it a try to unbrick it, I'm not a noob after all (selfish guy!!!!!!!!!)
I think this HD2 was somehow bricked while trying to install Android into NAND, or installing MAGDLR, as far as my pupil can tell from his dad
So this Sensation can't boot and has this, written in the 3 colours screen
PB81100 HX-BC
SPL-2.08.00 8G XE
MicroP(LED) 0x05
icroP(TOUCH) 0x40
Upgrade ROM code error
Please try again
Click to expand...
Click to collapse
Here is the state I had this HD2, unable to boot, just able to get into bootloader with the message above.
I tried to flash latest Dutty ROM (because I was using Dutty creme of the creme at my HD2 time!)
=> through USB, flash freezes sometimes at 2%, sometimes 75%
=> through SD card: it flashes, says it's successful, but the device doesn't boot, back to three colors screen, or white screen with error message if trying to boot normally
I tried task29: full of errors, not better after flashing a ROM
I tried flashing a shipped "official" ROM => same as custom ROM, says success, flashed through SD card, but never boots to something else than 3 colors screen..
I tried factory reset, said successful, but still no boot!!
I tried flashing a Radio ROM=> flash successful, but still no boot
I tried flashing HSPL again, 2.08 and previous versions: it flashes OK, can see the changes in three colours screen, but no success flashing a ROM after
I noticed that sometimes, this HD2 vibrates 7 times quickly in a row, which my own HD2 had never done, and I suppose it's a very bad signal
I'm not a noob at all, but really can't follow every thread, and tried the search function with no real luck.
Is this HD2 definitly bricked? Is there something I can do?
Sorry again to seem so noob, I would have flammed someone posting like me, when I was following HD2 development everyday, before having my Sensation (and a Moto Defy for my wife)
see the line ''SPL-2.08.00 8G XE'' (you actually mean 2.08.0000) well teh .0000 tells you its NOT hspl, its a stock spl, so nothing will flash.
run hspl 2,3 or 4 and choose ''2.08.hspl''. Flashing, task29, magldr, all that will now flash.
THANKS!
how stupide I am (or too long away from WinMo)
I had tried hspl2 that was unable to do the job, hspl4 did it
So now I have spl 2.08.hspl
...but face other problem:
task29 fails: it launches OK but my HD2 disconnects from USB as soon as task29 starts its process
if I try to flash a custom ROM (the dutty one my own HD2 is still using), via usb, same, usb disconnects (it wasn't before I flashes hspl 2.08)
If I try flashing as a LEOIMG with microSD, it feezes at about 2/3 of the process
trying to flash a shipped ROM leads to errors, back to three colors screen with "Upgrade ROM code error Please try again"
...not to mention each time it replaces the hspl by stock spl
Any idea?
i900frenchaddict said:
THANKS!
how stupide I am (or too long away from WinMo)
I had tried hspl2 that was unable to do the job, hspl4 did it
So now I have spl 2.08.hspl
...but face other problem:
task29 fails: it launches OK but my HD2 disconnects from USB as soon as task29 starts its process
Click to expand...
Click to collapse
don't run flashes from running winmo, enter bootloader manually, when serial --> usb, run your flash/task29 or whatever. (Gorget about task29, it isnt necessary)
alternatively, if you do run it from running winmo, then once the phone has restarted and the usb has timed out, simply run teh flash program again, and dont touch teh phone, since it will now be in bootloader, and my above note takes over.
if I try to flash a custom ROM (the dutty one my own HD2 is still using), via usb, same, usb disconnects (it wasn't before I flashes hspl 2.08)
If I try flashing as a LEOIMG with microSD, it freezes at about 2/3 of the process
Click to expand...
Click to collapse
not a good sign, but ignore that for now.
trying to flash a shipped ROM leads to errors, back to three colours screen with "Upgrade ROM code error Please try again"
...not to mention each time it replaces the hspl by stock spl
Any idea?
Click to expand...
Click to collapse
because that's the way to remove hspl, , flash a stock rom from sd. Step 1 of sd flashing is the spl gets flashed, removing hspl, the phone then restarts and tries to flash the stock rom, but now that hspl has gone it fails, since you aren't using the correct stock rom for that particular phone.
Try this, get the stock 3.14 rom ( filename will be RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship )
EDIT - you dont have a tmous, right? if you do, dont do this!)
phone into bootloader
use hspl4 to set 3.03.hspl
phone into bootloader
flash the 3.14 rom over usb.
report back.
Man, I'm on the good way!
3.03.hspl seems to be the key, when 20.8hspl wasn't
While the stock 3.14 ROM finished to download, I could run a Task29 till the end, no more USB disconnecting.
Crossing fingers!
I'll edit this post once I've tried to flash the stock 3.14 ROM
Huge thanks to you !!!!
2.x spl is not a stock spl for regular hd2's, only tmous, so whilst it does work, it does introduce the odd problem. for example you cant sd flash stock roms with 1.x versions when you are currently on 2.x.
SO, with a regular hd2, any time you wanna return to stock or are having flashing troubles of some kind, it is always worth using hspl.exe (2,3 or 4 , doesnt matter) to remove the 2.x spl/hspl.
For me, I always go back to 1.66.0000 using hspl2 before i even try to flash a stock rom. Since i choose a 0000 ending, it will be updated as required by the stock rom.
Fingers crossed it helped.
samsamuel said:
Try this, get the stock 3.14 rom ( filename will be RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship )
EDIT - you dont have a tmous, right? if you do, dont do this!)
phone into bootloader
use hspl4 to set 3.03.hspl
phone into bootloader
flash the 3.14 rom over usb.
report back.
Click to expand...
Click to collapse
This worked for me...Thank you so much.
Ok I was moving over Andriod from WM65 Energy rom and started to install the MAGLDR and it seemed to load up fine! But once I rebooted, I just get the Energy ROM screen and it won't go further.
Even if I put it back in to BootLoad mode I can't get ActiveSync to connect to continue!
Any ideas?
WinMo ROMs and Android ROMs need different SPL versions. You should reset your HD2 using this step by step guide: http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
You should take the latest stock ROM available, since this includes the latest Radio ROM which you need to run most Android ROMs. Afterwards I suggest installing HSPL2.08 and MAGLDR, CWM again.
Ok, I downloaded the stock rom and extracted the RUU and renamed to leoimg.nbh and did the bootloader thing and it didn't work!
What do I try next?
I know I've had to do the Task29 before when it got like this. Is that what I need to do again?
no need for task29.
there are two 'musts' for magldr to work
1 spl MUST be 2.08.hspl ONLY, no other will work.
In bootloader, does teh spl line say 2.08.hspl? no? magldr will not appear, even though it is flashed ok.
2 radio MUST be one that is compatible with the fabled 576meg ram trick, or to put it another way, it must be compatible with tmous phones, or a third way, it must be a x.xx.50. version radio, not a x.xx.51. version. Also, 2.05.50 and 2.06.50 will not work either. The one that came with your phone wont work, (assuming you don't have a tmous, if you DO have a tmous, you dont need to change radio.)
For ease, go flash radio 2.15.50
When both these conditions are met, and only then, magldr will start.
So, as you are now, ,
phone into bootloader
flash 2.08.hspl
phone back into bootloader
flash radio 2.15.50
back into bootloader
flash magldr
restart.
samsamuel said:
no need for task29.
there are two 'musts' for magldr to work
1 spl MUST be 2.08.hspl ONLY, no other will work.
In bootloader, does teh spl line say 2.08.hspl? no? magldr will not appear, even though it is flashed ok.
Click to expand...
Click to collapse
I believe this is my problem! A while back I mistakenly thought HSPL 3 was an updated version so I put it on. It is the SPL-3.03.HSPL. I'm not sure how to get it off and it doesn't seem to connect via activestink and it doesn't seem to wanna upgade off my card. leoimg.nbh is in root and booted in to bootload mode!
g
Just go back to the boot loader, connect your PC via USB and flash HSPL 2.08 over again. The HSPL application scans which SPL is installed and provides you the SPLs you can flash. 2.08HSPL is your choice.
Also search for radio master thread for HD2 in this forum, download and flash latest radio ROM.
Sent from my NexusHD2 using XDA App
Well, tried reloading of HSPL2 and I got an critical error bad SPL version!
I'll be searching around for this new error if anyone has a solution!
Also, if someone has time to get on Skype, I don't mind dropping down a tip!
p
UPDATED:
Ok, the trick was to use HSPL4 and then downgrade to HSPL2! Back on track! For now!!
Ok, the trick was to use HSPL4 and then downgrade to HSPL2! Back on track! For now!!
Click to expand...
Click to collapse
You arent thinking right about exactly what hspl2, 3 and 4 are. There was no need to even use hspl2, hspl4 can set 2.08.hspl
hspl2 hspl3 and hspl4 aren't different 'versions' of hspl in the way you think, , selecting 2.08.hspl using hspl2 or hspl3 or hspl4 gives the very same 2.08.hspl, no difference. The .exe's are just loader programs, the only difference between them is the phone models and spl's each supports. so when you went to stock and no doubt ended up with spl 3.03.0000 hspl2 wouldnt work because it requires a starting spl of 2.08 or lower, as does hspl3.
using hspl4 does work, because it was released for just that reason, to support spl 3.03, its not 'better' or a higher version than hspl3, its just been tweaked to support more spl's.