Help with HSPL - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi there,
I've bought my HTC Leo 1 week ago and I want to install Android on it. I'm following the steps of this post but it's a little hard if you haven't flash a cell phone ever
The thing is that my cell phone has SPL 3.03.0000, but I need HSPL 1,2 or 3, So I need to downgrade the SPL to use the right HSPL.
Does anyone know how to downgrade the SPL? If I understood right I need to flash a new ROM of win mo 6.5 in my cell phone with the right spl, but I don't know where to find it.
Thanks!

Search for HSPL2 or HSPL3.

You actually need HSPL4 AFAIK. Just search for HSPL4 then download etc. Then go in to bootloader and run the .exe found in the file you've downloaded. Click through the steps and you'll get to a screen with a drop down menu, choose 2.08.HSPL from the menu. Then just click next and it'll flash.
Sent from my HTC Vision using XDA App

Skellyyy said:
You actually need HSPL4 AFAIK. Just search for HSPL4 then download etc. Then go in to bootloader and run the .exe found in the file you've downloaded. Click through the steps and you'll get to a screen with a drop down menu, choose 2.08.HSPL from the menu. Then just click next and it'll flash.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
then I need HSPL4. I just saw this post and it says "Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03. You need HSPL2.08 to run Android / WP7 / MAGLDR." So, among all the HSPL releases, the only one that doesn't work is the 3.03? If that's right the HSPL4 should work, I'll give it a try

Oh, I just see this post and it says "You must have hspl 2 or 3 for android to run well please use HSPL GUIDE" . Is there any problem with HSPL4 of the guide is old?

It won't matter. All HSPL4 does is flash 2.08.HSPL to bootloaders that have SPL 3 and up as the older versions are compatible with older SPL's (bootloader).
Sent from my HTC Vision using XDA App

Well, I have another problem now
I'm following this steps to put HSPL4:
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL4.exe from your pc and read all the text carefully
4. When finished reading click next in the HardSPL program
I connect my phone to the PC, and the Windows Mobile center pops out, but when I go to the ActiveSync on my phone it says that I should install the ActiveSync software in my pc (I don't know why but I can't install ActiveSync on my pc, it says that my software is uncompatible (Windows 7, 64 bit), I read that WMDC is used in W7 instead of ActiveSync). So I executed the HSPL4 (phone conected) and wait 5 minutes, and it didn't find the USB conection of my phone with my pc :/
Anyone had this problem or know any alternative? :/
Thanks!

Done, I use the "NOTE: You can also install HARDSPL by entering Bootloader mode manually, then running the HSPL4.exe program once you see 'USB' at the bottom of the tri-colour screen.". I didn't saw it

Haha I was just about to say that. It's actually better if you run it straight from HSPL.
So are you all flashed now or what?

Skellyyy said:
Haha I was just about to say that. It's actually better if you run it straight from HSPL.
So are you all flashed now or what?
Click to expand...
Click to collapse
I just flashed it and now I have to install the Radio, but I have the same problem (in the steps it says that I need to be connected by activeSync)
I think I will try again from the Bootloader mode manually, what do you say?
Edit: In this post says that the radio have to be installed before the rom, but in this one it says the opposite.
(I'm a little lost )

Install everything from the bootloader. They;ll all flash correctly from there.
Install the radio before the ROM. Make sure you flash 2.15.50.14 then flash MAGLDR and flash away!

mm, I downloaded the radio 2.15.50.14 but when I execute the CustomRUU and the phone is conected in Bootloader mode it doesn't recognize the phone :S
I can't figure out any solution... what a thing...
PD: Now it shows SPL-3.03.HSP in the bootloader screen, so that's ok

Actually no that's the reason why its not okay. You flashed the wrong HSPL. Just go back to bootloader, open up HSPL4 and when you get to a drop down menu chose 2.08.HSPL from the menu. That's the one you need. Flash that, then reflash the radio and it will flash properly.
Sent from my HTC Vision using XDA App

i don't know

christian.patella said:
i don't know
Click to expand...
Click to collapse
Thank you for the useful post...
Sent from my HTC Vision using XDA App

Oh, I've just realized one thing.. In this post says:
★STEP 2★
Prepare your device
windows rom - windows rom has been linked with issues within the android builds so for the first time im going to compile a list of working roms here that have no issues within android
i have been using ChuckyROM GTX + CHT 1.8.5 - 23128 from the start of android development and have yet to have an issue below is a list of other roms and links that are working well with android :-
BARE BONES WM ROM FOR ANDROID BY NRGZ28
[ROM][WWE]★★★Astraios Roms★★★[REG/BUUF/GTX][23569][22nd July]
ELEGANCIA ROM Series™
ChuckyROM GTX + CHT 1.8.5 - 23128 ~ 2.10.1
¸¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ | 21911||23129 * Sense 2018
★★★ PLEASE LEAVE LINKS AND INFORM ME OF ANY ROMS YOU HAVE TRIED AND HAD NO ISSSUES ★★★
FOR INFORMATION ON HOW TO FLASH A ROM PLEASE GO TO FLASHING GUIDE.
That means I have to install another windows rom before the android one?
PD: When I installed the HSPL 3.03.0000 (by mistake) and then the 3.03.HSPL, in both cases it shows ''We hacked it!'', but I just install the 2.08.HSPL and it didn't show anything, it just said ''Succesfully done'', is that ok? . Edit: The phone displays the right version of SPL, i'll try with the custumRUU in a moment

I'm waiting for the answer I'm afraid of running the customruu without haven't changed the WM Rom (That step is't very clear for me )

If you have 2.08.HSPL on your phone all you need to do now is flash MAGLDR from the RUU. You don't need a custom WinMo ROM if you have the correct radio etc. as MAGLDR will over-write WinMo anyway.
So basically if your phone is saying 2.08.HSPL just go back to the bootloader and flash the MAGLDR RUU.

Help please

dami_rz said:
Help please
Click to expand...
Click to collapse
I have.

Related

Hspl2:critical error

hey guys trying to flash my first WM(US T-MO HD2) phone but its not working out.i followed every procedure given by MSKIP but i keep getting this message after pressing next on HSPL2_RUN: "CRITICAL ERROR,FLOW:00000003,ERROR CODE:00000004,DESCRIPTION:BAD MODEL ID".i turned off antivirus and restarted my windows 7 then connected my device with WINDOWS MOBILE DEVICE CENTER v.6.1 and then executed the HSPL2_RUN but didnt work out.bootloader screen shows up at the bottom saying usb and the phone didnt brick it just stayed in bootloader till i took the battary out and restarted the phone.what am i doing wrong please correct me.thank u
pretty sure thats the wrong hspl2.
Use teh link in my sig to get hspl1024 and compare it to the one you have,
I agree sounds like the wrong hspl. When you actually flash it the hspl should be 2.08.0000 not 2.0.0000 as the unlocker provides 2 options.
lwrdrchvy2 said:
I agree sounds like the wrong hspl. When you actually flash it the hspl should be 2.08.0000 not 2.0.0000 as the unlocker provides 2 options.
Click to expand...
Click to collapse
or did you mean to say "When you actually flash it the hspl should be 2.08.hspl not 2.08.0000 as the unlocker provides 2 options."
I was referring to the actual ruu, when the window displays on your pc it needs to be the 2.08.000 hspl, once the phone is unlocked the spl line will read 2.08.hspl like you stated.
thanx guys i will try SAMSAMUAL's HSPL2_1024_RUN and c if it goes through.thanx
thank u SAMSAMUEL that was the right HSPL.thanks to u and other i've finally succcessfully flashed my first WM phone.
all credit goes to Bepe, Cotulla and the DFT whos genius gave us HSPL
hspl1024
@samsamuel -
im very new to this and am pressuming i need hspl1024 for my t-mobile htc hd2. i tried looking in your signature but couldnt find it. is it hspl3 that u mean?
trying to get hspl so that i can switch the os to andorid.
it would be great if you could help and email me at [email protected]
thanks again
zorawar said:
@samsamuel -
im very new to this and am pressuming i need hspl1024 for my t-mobile htc hd2. i tried looking in your signature but couldnt find it. is it hspl3 that u mean?
trying to get hspl so that i can switch the os to andorid.
it would be great if you could help and email me at [email protected]
thanks again
Click to expand...
Click to collapse
hspl3 is just an updated hspl1024, updated to support more model id's. You can use either. hspl1024 is on page 99 of the HSPL thread, however yes, you can use hspl3 in my sig. choose 2.08.hspl not 2.08.0000(0000 is stock)
When you say so you can switch to android, you dont mean the youtube vid and connected site with the 'android beta OS installer' do you? which says you need hspl 1.42.hspl? cos thats a fake.
Please People...I really need help here..My phone make me crazy...
I try to flash my EU HTC HD2 with Android Nand rom and i have problem with that so i decide to put everithing on default with stock rom...
I download it and try but all the time error 290, and i read and read and somebody said that i need to have 1.42.HSPL (in that moment mine was 2.08. HSPL) ...so i do that with the HSPL2_Run and all procedure to back my hd2 to STOCK was faild again...
So i decide to turn beck HSPL to 2.08.HSPL and install some CustomRUU but from that point i have the same
CRITICAL ERROR
FLOW:00000003
ERROR CODE:00000004
DESCRIPTION:BAD MODEL ID....
I use HSPL2_RUN and HSPL4...and it was working...but now just error...What happend? What can i do?
How that can work in one moment and in another not... :-/
Forward Thankful...
In bootloader, what does the top line of text say?
same problem as Camsy..
in top right of bootloader i've RUUNBH, and after this there's 8g8g8g8 SS-BC.
Now i've loaded hspl.3.03 but i want to downgrade at hspl2 cause hspl3 is not compatible with my hd2.

Issues with flashing HSPL on my Leo

Hi,
I wanted to port Android on my Leo and I have issues with flashing the HSPL first (I was using the Gold Card method to flash new FW so far).
I have downgraded to 1.66 with SPL 1.42, then I tried to HSPL my device with using HSPL3_PKG.exe from XDA. When I start the .exe the phone goes into Bootloader showing first Serial, then USB(I installed the HTC USB drivers per installing HTC Sync), the program allows me to flash 2.08 HSPL and then the flash starts as the status bar moves from left to right constantly but nothing happens on the device, even not after 10 Minutes, I pull off my Leo and it boots fine but no HSPL flash, I am still on SPL 1.42. What am I doing wrong? (I am using Parallels on a MAC btw).
Any comments?
Thanks
Any able to help?
L2C said:
Hi,
I wanted to port Android on my Leo and I have issues with flashing the HSPL first (I was using the Gold Card method to flash new FW so far).
I have downgraded to 1.66 with SPL 1.42, then I tried to HSPL my device with using HSPL3_PKG.exe from XDA. When I start the .exe the phone goes into Bootloader showing first Serial, then USB(I installed the HTC USB drivers per installing HTC Sync), the program allows me to flash 2.08 HSPL and then the flash starts as the status bar moves from left to right constantly but nothing happens on the device, even not after 10 Minutes, I pull off my Leo and it boots fine but no HSPL flash, I am still on SPL 1.42. What am I doing wrong? (I am using Parallels on a MAC btw).
Any comments?
Thanks
Click to expand...
Click to collapse
This should answer all of your questions :
http://forum.xda-developers.com/showthread.php?t=611433
I recommend upgrading your SPL to 2.08 as I have flashed HSPL 2.08 and haven't had any problems whatsoever in the past 4-5 months of having this phone. First time installation worked like a charm
maff1989 said:
This should answer all of your questions :
http://forum.xda-developers.com/showthread.php?t=611433
I recommend upgrading your SPL to 2.08 as I have flashed HSPL 2.08 and haven't had any problems whatsoever in the past 4-5 months of having this phone. First time installation worked like a charm
Click to expand...
Click to collapse
Hi
thanks, I read trough all this, and tried to work with all three HSPL Versions, but I still don't get it work...
I just tried to run HSPL3_PKG.exe, when I choose SPL 2.08.0000 and run it, the program starts, I choose SPL 2.08.000 and then it starts, the bar moves from left to right, but nothing happens on the phone...
Got it to work finally! It just wouldn't work on my Windows XP via Paralells on a MAC, I used a Windows 7 Machine, all good now, my Leo is HSPL 2.08 and got a NAND Android OS on it...finally a phone that one can use now

Got a HD2. Now im confused

Hey guys,
today i got me a HD2. Bought it on ebay and now i want to flash NAND Android on it.
Im a bit confused. the HD2 is running WMo right now and i want to have it running Cyanogenmod.
do i get that order right?
1.) Flash HardSPL 2.08
2.) Flash Radio 2.08xx
3.) Flash Magldr 1.12
4.) Flash Clockworkmod
5.) Flash Cyanogenmod
ive read that i have to have hardspl 1.42.0000 before flashing 2.08.
How can i check that?
on the one hand ive read that i need to install the drivers via windows update but ive also read that i need to install activesync??
which is the right Radio for me? (http://forum.xda-developers.com/showthread.php?t=611787) i have a German O2 512mb HD2
thanks for your help
First you need to make sure that there is a fully charged battery (it doesn't have to be but it helps).
Boot up into Bootloader mode (press and hold the Volume Down button then tap the Power button). You will see a four colour screen with the word 'Serial' at the bottom. On the screen you wil see SPL. As long as it is not 3.03 then you don't have to flash a non 3.14 ROM.
Now connect to your PC (you don't need activesync of WMDC, especially if you are going to run it as an Android phone). The 'Serail' will change to 'USB'. Run HSPL2 and select 2.08.HSPL
The phone will reboot. Again switch it on in Bootloader mode and connect to your computer. Download the 2.15.50 RADIO and run it (just tick the box about activesync).
Now you are ready to start the Android ROM flashing.
If you're using XP I suggest downloading ActiveSync because if you don't when you're running the DAF.exe file when flashing you'll keep getting this "DAPI.dll" error. That's only if you're using Windows XP though.
Sent from my FutureShocks HD2 MIUI using XDA App
thanks for your help
CM is running like a charm!

Is this HD2 screwed?

Okay guys, am I screwed?
I tried putting android on this HD2.
I successfully installed HSPL 2.08 HSPL (So NO 2.08.0000)
Then I tried installing MAGLDR 1.13, just by executing the ROMUtilityUpdater.exe.
Clicked the first checkbox, then the 2nd, and then that 'Update' thingy.
It was going to updating from 1.72.XXXXX to 2.00.0.000 (or something)
I had it connected through Activesync (WinXP).
It was ready in 30seconds, instead of the normal 10 minutes.
Now it just hangs on the White HTC bootscreen.
I tried doing a Task29, but in the RGB Bootloader (USB connected) screen it won't connect to ActiveSync. I Ran it anyway, but still no Windows or MAGLDR.
Do I need to install a different Radio? If so how do I do that and where can I find it?
I am downloading a stock WinMo 6.5 Rom (vodafone branded, from HTC.com)
Thanks for all the help in advance!
had simillar problem. I would just install the latest Windows ROM 3.03 but thru SD card (Download official 3.03 ROM for Your phone, extract it, change the nbh file name to LEOIMG, put it on Your SD card, Switch the phone on holding volume button down, and then go with the instructions on the screen) cuz it changes Your SPL, then install HSPL 4. After that install CLK and CLOCKWORK and then NAND Your device with clk version android.
Look here http://forum.xda-developers.com/showthread.php?t=1021837 if You dont know how to install clK. It is a bit complicated but if You are a bit computer literate You should be ok.
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
wouternet said:
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
Click to expand...
Click to collapse
Hi,
Go HERE
Stock ROMS always save the day haha
Thanks brother
All HTC phones have tiny screws which helps the body stay together. So yes every HTC phone is Screwed

How do i downgrade spl 3.03 to 2.08?

Hello XDA.
as you can see iam new to the forum. and i have been trying some basic SD roms. and kinda found out that i realy liked the miui roms.
So i was about to try to install [ROM] HTC HD2 Leo MIUI.us Presents MIUI 1.7.15 Pure English [AOSP]
But then i noticed in the Unlocking HD2 step that my phone isnt unlocked and its also running spl 3.03.
So what i need help with is.
how do i downgrade to 2.08? (witch is needed in the next step) so i can continue the steps...
my phone is a european htc hd2 (norway) and is still running stock wm 6.5.
All help appreasiated.
Bootloader
Hspl4
Choose 2.08.hspl
thanks for the respond.
but would it be possible to be litle more detailed?
edit:
When you say bootloader i assume you refering to MAGLDR...
No,bootloader is bootloader,magldr is magldr. Plenty of stickies hand holding you through all this,and countless hundreds single threads explaining it.
Download HSPL 4. Connect phone to PC via ActiveSync. Run HSPL4 on PC and choose HSPL 2.08. Wait a few seconds. Should see 'We Hacked it!' on phone. You can now go ahead and (try) to install android following the other steps.
worked like a a sharm.
think i touth this was way more advanced so. my head wasnt sett it was this easy to understand. .
Nigeldg said:
Download HSPL 4. Connect phone to PC via ActiveSync. Run HSPL4 on PC and choose HSPL 2.08. Wait a few seconds. Should see 'We Hacked it!' on phone. You can now go ahead and (try) to install android following the other steps.
Click to expand...
Click to collapse
Mate. Can i do this same step for my T-Mobile UK HTC HD2. Sorry I am total noob. I got lost in Download HPSL 4 and ActiveSync.
forget activesync, ,
get hspl4 (see my sig)
put phone in bootloader
connect usb
when 'serial' becomes 'usb' run hspl4
choose desired target spl/hspl
go
done.
ReshamG said:
Mate. Can i do this same step for my T-Mobile UK HTC HD2. Sorry I am total noob. I got lost in Download HPSL 4 and ActiveSync.
Click to expand...
Click to collapse
Yeah as Samsamuel said, ActiveSync is not really necessary it's just easier for most people to understand.
Before doing this I would recommend updating your ROM to the latest official stock ROM 3.14 (go to the settings and then software info to see this if my memory serves me correctly, haven't used WinMo in ages ) as this will have the latest radio and will save you from having to reflash it later.
Download HSPL4 package (just see samsamuel's link in his sig), turn the phone off then boot into bootloader by holding power and volume down buttons. Connect phone to PC via USB, run the HSPL installer, select HSPL 2.08 (make sure it's HSPL, not SPL, SPL 2.08 won't do any damage, but it won't help either ) and viola, it will be installed after a few seconds
i have spl 1.67 how to upgrade or downgrade?

Categories

Resources