Hey guys,
today i got me a HD2. Bought it on ebay and now i want to flash NAND Android on it.
Im a bit confused. the HD2 is running WMo right now and i want to have it running Cyanogenmod.
do i get that order right?
1.) Flash HardSPL 2.08
2.) Flash Radio 2.08xx
3.) Flash Magldr 1.12
4.) Flash Clockworkmod
5.) Flash Cyanogenmod
ive read that i have to have hardspl 1.42.0000 before flashing 2.08.
How can i check that?
on the one hand ive read that i need to install the drivers via windows update but ive also read that i need to install activesync??
which is the right Radio for me? (http://forum.xda-developers.com/showthread.php?t=611787) i have a German O2 512mb HD2
thanks for your help
First you need to make sure that there is a fully charged battery (it doesn't have to be but it helps).
Boot up into Bootloader mode (press and hold the Volume Down button then tap the Power button). You will see a four colour screen with the word 'Serial' at the bottom. On the screen you wil see SPL. As long as it is not 3.03 then you don't have to flash a non 3.14 ROM.
Now connect to your PC (you don't need activesync of WMDC, especially if you are going to run it as an Android phone). The 'Serail' will change to 'USB'. Run HSPL2 and select 2.08.HSPL
The phone will reboot. Again switch it on in Bootloader mode and connect to your computer. Download the 2.15.50 RADIO and run it (just tick the box about activesync).
Now you are ready to start the Android ROM flashing.
If you're using XP I suggest downloading ActiveSync because if you don't when you're running the DAF.exe file when flashing you'll keep getting this "DAPI.dll" error. That's only if you're using Windows XP though.
Sent from my FutureShocks HD2 MIUI using XDA App
thanks for your help
CM is running like a charm!
Related
Hey
I used the search button, but didn't find something that resembled my problem.
This is my problem:
*When I want to update my magdlr 1.11 to 1.13 through bootloader (I have
usb connection) the program keeps getting stucks at 0%
I have radio (Leo_RADIO_2.15.50.14) that support 576mb Ram and I use "ROMUpdateUtility", which I start as adminastrator.
*When I try to update to magdlr 1.12, the exact same thing happens :s
*Hopin' to start from the beginning: I use Task29, that aswell gets stuck at 0%
*When I want to start from the BEGINNING (back to 6.5 winm), I use the stock 1.66 NDL HTC HD2 which I used to downgrade my firmware. That also gets stuck at 0%
UPDATE:
I JUST DISCOVERED WHEN I USE THE "THE PDA PHONE ROM UPDATE UTILITY" i SEE THIS:
FROM: IMAGE VERSION: (NOTHING,COMPLETELY EMPTY)
TO: IMAGE VERSION: 2.0.00.00
I use the bootloader with spl-2.08.0000 with a WINDOWS 7 laptop 64bit in administrator mode and tried with 2 different usb cabels with/without a microsd card of 1GB. I flashed steps 1-6 (see below) with no problems and I tried several usb ports and rebooted the laptop several times.
I just bought a 2 week old HTC HD2.
I didn't remove Winm 6.5, when I installed Magdlr, WinM didnn't come up
These where my exact steps and all the files came from this site:
1) I downgraded the htc hd2 firmware to have spl to 1.6 from 3.03(something)
2) I used Hspl to Hspl 2.08 (something) (with windows center mobile 6.1 (update))
3) I updated the radio to Leo_RADIO_2.15.50.14
4) I used magdlr 1.11
5) I went to usb mass storage on magdlr and put "TyphooN_CM7_v2.5.1" (from this site) on the SDcard
6) I then went to USB flasher and went to the "Recovery 135M" (from this site) and executed DAF.exe and followed the steps
7) my phone rebooted
8) FROM THIS MOMENT ON,I REALISED I NEEDED MAGLDR 1.13 INSTEAD 1.11 AND FROM THIS MOMENT the HTC keeps at 0% when I try to do anything.
I hope you understand my ramblings.
Could you please help out, got this as a birthday gift and my dad is going to get pissed after using an iphone 2G for 5 years long :-(
2.08.0000 is stock, any spl in Bootloader that ends. 0000 is stock. Task29, magldr, all need hspl, 2.08.0000 is not hspl. Whenever you flash stock from SD card, hspl is gone.
Re apply hspl.
Man, If I were gay, you wouldn't know what I would do to you !!
I love you man, seriously, I'm staling you now
Hartendief said:
Hey
I used the search button, but didn't find something that resembled my problem.
This is my problem:
*When I want to update my magdlr 1.11 to 1.13 through bootloader (I have
usb connection) the program keeps getting stucks at 0%
I have radio (Leo_RADIO_2.15.50.14) that support 576mb Ram and I use "ROMUpdateUtility", which I start as adminastrator.
*When I try to update to magdlr 1.12, the exact same thing happens :s
*Hopin' to start from the beginning: I use Task29, that aswell gets stuck at 0%
*When I want to start from the BEGINNING (back to 6.5 winm), I use the stock 1.66 NDL HTC HD2 which I used to downgrade my firmware. That also gets stuck at 0%
UPDATE:
I JUST DISCOVERED WHEN I USE THE "THE PDA PHONE ROM UPDATE UTILITY" i SEE THIS:
FROM: IMAGE VERSION: (NOTHING,COMPLETELY EMPTY)
TO: IMAGE VERSION: 2.0.00.00
I use the bootloader with spl-2.08.0000 with a WINDOWS 7 laptop 64bit in administrator mode and tried with 2 different usb cabels with/without a microsd card of 1GB. I flashed steps 1-6 (see below) with no problems and I tried several usb ports and rebooted the laptop several times.
I just bought a 2 week old HTC HD2.
I didn't remove Winm 6.5, when I installed Magdlr, WinM didnn't come up
These where my exact steps and all the files came from this site:
1) I downgraded the htc hd2 firmware to have spl to 1.6 from 3.03(something)
2) I used Hspl to Hspl 2.08 (something) (with windows center mobile 6.1 (update))
3) I updated the radio to Leo_RADIO_2.15.50.14
4) I used magdlr 1.11
5) I went to usb mass storage on magdlr and put "TyphooN_CM7_v2.5.1" (from this site) on the SDcard
6) I then went to USB flasher and went to the "Recovery 135M" (from this site) and executed DAF.exe and followed the steps
7) my phone rebooted
8) FROM THIS MOMENT ON,I REALISED I NEEDED MAGLDR 1.13 INSTEAD 1.11 AND FROM THIS MOMENT the HTC keeps at 0% when I try to do anything.
I hope you understand my ramblings.
Could you please help out, got this as a birthday gift and my dad is going to get pissed after using an iphone 2G for 5 years long :-(
Click to expand...
Click to collapse
You're useless not the hd2 lol do your homework before doing anything would be a good idea.
Hartendief said:
Man, If I were gay, you wouldn't know what I would do to you !!
I love you man, seriously, I'm staling you now
Click to expand...
Click to collapse
Hehe, just put in a good word for me if judgement day arrives or alien overlords come a'conquering.
Thank you, thank you thank you SAMSAMUEL!!!!
Hi there,
I've bought my HTC Leo 1 week ago and I want to install Android on it. I'm following the steps of this post but it's a little hard if you haven't flash a cell phone ever
The thing is that my cell phone has SPL 3.03.0000, but I need HSPL 1,2 or 3, So I need to downgrade the SPL to use the right HSPL.
Does anyone know how to downgrade the SPL? If I understood right I need to flash a new ROM of win mo 6.5 in my cell phone with the right spl, but I don't know where to find it.
Thanks!
Search for HSPL2 or HSPL3.
You actually need HSPL4 AFAIK. Just search for HSPL4 then download etc. Then go in to bootloader and run the .exe found in the file you've downloaded. Click through the steps and you'll get to a screen with a drop down menu, choose 2.08.HSPL from the menu. Then just click next and it'll flash.
Sent from my HTC Vision using XDA App
Skellyyy said:
You actually need HSPL4 AFAIK. Just search for HSPL4 then download etc. Then go in to bootloader and run the .exe found in the file you've downloaded. Click through the steps and you'll get to a screen with a drop down menu, choose 2.08.HSPL from the menu. Then just click next and it'll flash.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
then I need HSPL4. I just saw this post and it says "Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03. You need HSPL2.08 to run Android / WP7 / MAGLDR." So, among all the HSPL releases, the only one that doesn't work is the 3.03? If that's right the HSPL4 should work, I'll give it a try
Oh, I just see this post and it says "You must have hspl 2 or 3 for android to run well please use HSPL GUIDE" . Is there any problem with HSPL4 of the guide is old?
It won't matter. All HSPL4 does is flash 2.08.HSPL to bootloaders that have SPL 3 and up as the older versions are compatible with older SPL's (bootloader).
Sent from my HTC Vision using XDA App
Well, I have another problem now
I'm following this steps to put HSPL4:
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL4.exe from your pc and read all the text carefully
4. When finished reading click next in the HardSPL program
I connect my phone to the PC, and the Windows Mobile center pops out, but when I go to the ActiveSync on my phone it says that I should install the ActiveSync software in my pc (I don't know why but I can't install ActiveSync on my pc, it says that my software is uncompatible (Windows 7, 64 bit), I read that WMDC is used in W7 instead of ActiveSync). So I executed the HSPL4 (phone conected) and wait 5 minutes, and it didn't find the USB conection of my phone with my pc :/
Anyone had this problem or know any alternative? :/
Thanks!
Done, I use the "NOTE: You can also install HARDSPL by entering Bootloader mode manually, then running the HSPL4.exe program once you see 'USB' at the bottom of the tri-colour screen.". I didn't saw it
Haha I was just about to say that. It's actually better if you run it straight from HSPL.
So are you all flashed now or what?
Skellyyy said:
Haha I was just about to say that. It's actually better if you run it straight from HSPL.
So are you all flashed now or what?
Click to expand...
Click to collapse
I just flashed it and now I have to install the Radio, but I have the same problem (in the steps it says that I need to be connected by activeSync)
I think I will try again from the Bootloader mode manually, what do you say?
Edit: In this post says that the radio have to be installed before the rom, but in this one it says the opposite.
(I'm a little lost )
Install everything from the bootloader. They;ll all flash correctly from there.
Install the radio before the ROM. Make sure you flash 2.15.50.14 then flash MAGLDR and flash away!
mm, I downloaded the radio 2.15.50.14 but when I execute the CustomRUU and the phone is conected in Bootloader mode it doesn't recognize the phone :S
I can't figure out any solution... what a thing...
PD: Now it shows SPL-3.03.HSP in the bootloader screen, so that's ok
Actually no that's the reason why its not okay. You flashed the wrong HSPL. Just go back to bootloader, open up HSPL4 and when you get to a drop down menu chose 2.08.HSPL from the menu. That's the one you need. Flash that, then reflash the radio and it will flash properly.
Sent from my HTC Vision using XDA App
i don't know
christian.patella said:
i don't know
Click to expand...
Click to collapse
Thank you for the useful post...
Sent from my HTC Vision using XDA App
Oh, I've just realized one thing.. In this post says:
★STEP 2★
Prepare your device
windows rom - windows rom has been linked with issues within the android builds so for the first time im going to compile a list of working roms here that have no issues within android
i have been using ChuckyROM GTX + CHT 1.8.5 - 23128 from the start of android development and have yet to have an issue below is a list of other roms and links that are working well with android :-
BARE BONES WM ROM FOR ANDROID BY NRGZ28
[ROM][WWE]★★★Astraios Roms★★★[REG/BUUF/GTX][23569][22nd July]
ELEGANCIA ROM Series™
ChuckyROM GTX + CHT 1.8.5 - 23128 ~ 2.10.1
¸¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ | 21911||23129 * Sense 2018
★★★ PLEASE LEAVE LINKS AND INFORM ME OF ANY ROMS YOU HAVE TRIED AND HAD NO ISSSUES ★★★
FOR INFORMATION ON HOW TO FLASH A ROM PLEASE GO TO FLASHING GUIDE.
That means I have to install another windows rom before the android one?
PD: When I installed the HSPL 3.03.0000 (by mistake) and then the 3.03.HSPL, in both cases it shows ''We hacked it!'', but I just install the 2.08.HSPL and it didn't show anything, it just said ''Succesfully done'', is that ok? . Edit: The phone displays the right version of SPL, i'll try with the custumRUU in a moment
I'm waiting for the answer I'm afraid of running the customruu without haven't changed the WM Rom (That step is't very clear for me )
If you have 2.08.HSPL on your phone all you need to do now is flash MAGLDR from the RUU. You don't need a custom WinMo ROM if you have the correct radio etc. as MAGLDR will over-write WinMo anyway.
So basically if your phone is saying 2.08.HSPL just go back to the bootloader and flash the MAGLDR RUU.
Help please
dami_rz said:
Help please
Click to expand...
Click to collapse
I have.
Okay guys, am I screwed?
I tried putting android on this HD2.
I successfully installed HSPL 2.08 HSPL (So NO 2.08.0000)
Then I tried installing MAGLDR 1.13, just by executing the ROMUtilityUpdater.exe.
Clicked the first checkbox, then the 2nd, and then that 'Update' thingy.
It was going to updating from 1.72.XXXXX to 2.00.0.000 (or something)
I had it connected through Activesync (WinXP).
It was ready in 30seconds, instead of the normal 10 minutes.
Now it just hangs on the White HTC bootscreen.
I tried doing a Task29, but in the RGB Bootloader (USB connected) screen it won't connect to ActiveSync. I Ran it anyway, but still no Windows or MAGLDR.
Do I need to install a different Radio? If so how do I do that and where can I find it?
I am downloading a stock WinMo 6.5 Rom (vodafone branded, from HTC.com)
Thanks for all the help in advance!
had simillar problem. I would just install the latest Windows ROM 3.03 but thru SD card (Download official 3.03 ROM for Your phone, extract it, change the nbh file name to LEOIMG, put it on Your SD card, Switch the phone on holding volume button down, and then go with the instructions on the screen) cuz it changes Your SPL, then install HSPL 4. After that install CLK and CLOCKWORK and then NAND Your device with clk version android.
Look here http://forum.xda-developers.com/showthread.php?t=1021837 if You dont know how to install clK. It is a bit complicated but if You are a bit computer literate You should be ok.
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
wouternet said:
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
Click to expand...
Click to collapse
Hi,
Go HERE
Stock ROMS always save the day haha
Thanks brother
All HTC phones have tiny screws which helps the body stay together. So yes every HTC phone is Screwed
Hello XDA.
as you can see iam new to the forum. and i have been trying some basic SD roms. and kinda found out that i realy liked the miui roms.
So i was about to try to install [ROM] HTC HD2 Leo MIUI.us Presents MIUI 1.7.15 Pure English [AOSP]
But then i noticed in the Unlocking HD2 step that my phone isnt unlocked and its also running spl 3.03.
So what i need help with is.
how do i downgrade to 2.08? (witch is needed in the next step) so i can continue the steps...
my phone is a european htc hd2 (norway) and is still running stock wm 6.5.
All help appreasiated.
Bootloader
Hspl4
Choose 2.08.hspl
thanks for the respond.
but would it be possible to be litle more detailed?
edit:
When you say bootloader i assume you refering to MAGLDR...
No,bootloader is bootloader,magldr is magldr. Plenty of stickies hand holding you through all this,and countless hundreds single threads explaining it.
Download HSPL 4. Connect phone to PC via ActiveSync. Run HSPL4 on PC and choose HSPL 2.08. Wait a few seconds. Should see 'We Hacked it!' on phone. You can now go ahead and (try) to install android following the other steps.
worked like a a sharm.
think i touth this was way more advanced so. my head wasnt sett it was this easy to understand. .
Nigeldg said:
Download HSPL 4. Connect phone to PC via ActiveSync. Run HSPL4 on PC and choose HSPL 2.08. Wait a few seconds. Should see 'We Hacked it!' on phone. You can now go ahead and (try) to install android following the other steps.
Click to expand...
Click to collapse
Mate. Can i do this same step for my T-Mobile UK HTC HD2. Sorry I am total noob. I got lost in Download HPSL 4 and ActiveSync.
forget activesync, ,
get hspl4 (see my sig)
put phone in bootloader
connect usb
when 'serial' becomes 'usb' run hspl4
choose desired target spl/hspl
go
done.
ReshamG said:
Mate. Can i do this same step for my T-Mobile UK HTC HD2. Sorry I am total noob. I got lost in Download HPSL 4 and ActiveSync.
Click to expand...
Click to collapse
Yeah as Samsamuel said, ActiveSync is not really necessary it's just easier for most people to understand.
Before doing this I would recommend updating your ROM to the latest official stock ROM 3.14 (go to the settings and then software info to see this if my memory serves me correctly, haven't used WinMo in ages ) as this will have the latest radio and will save you from having to reflash it later.
Download HSPL4 package (just see samsamuel's link in his sig), turn the phone off then boot into bootloader by holding power and volume down buttons. Connect phone to PC via USB, run the HSPL installer, select HSPL 2.08 (make sure it's HSPL, not SPL, SPL 2.08 won't do any damage, but it won't help either ) and viola, it will be installed after a few seconds
i have spl 1.67 how to upgrade or downgrade?
This phone came to me to upgrade to Win7
I used HSPL and installed 2.08 HSPL OK
But the phone will not connect to active Sync
I tried to flash in Bootloader mode, YET didnt work.
So I Installed Win 6.5 again all ok,
Still tried Win7 again, didnt work and phone cant boot complete again
I used SD card to flash win 6.5 ok, but cant connect to Active Sync
So I did Task 29, but it stops on 4%
Now phone can only stay in hspl 2.08 (I cant put normal 2.08)
Anyway, now phone can only flash to 1% by PC
By SD Card it fails around 4% (on RADIO V2)
Its a LEO (not TMOUS)
Ideas pls
HM you tried to flash WP7 rom using three colour bootloader mode_? you need to install magldr 1.13 first to install WP7 rom. You actually cant flash WP7 rom using phones original bootloader.
If you go to bootloader mod using Vol down and power menu Activesync will not detect your phone but you are still able to flash HSPL 2.08.
You can also perform task 29 using MTTY tool.
I dont recommend you flashing stock rom using SD card as it overwrite HSPL and in latest Shiped roms SPL is updated to version 3.03 which is not compatible with Magldr 1.13.
If you are stuck in HSPL try first to install HSPL 2.08 using HSPL4. You can find hspl4 here in forum just search.
After you installed HSPL2.08 using HSPL4 install Magldr 1.13 go to Services in Magldr Menu and select uselast24MB in NAND. Now you are ready to flash WP7.
Go back to main menu in Magldr and select USB Flasher mode and connect the phone to PC. Run flasher on the pc and flash. After that phone will reset.
Also make sure that your SD card is compatible with WP7 rom. Not all work with Windows Phone 7 Rom. I use sandisk 4gb and it works well.
just remember ANYTIME you flash a stock rom you are going to loose EVERYTHING (Hspl, MAGldr/cLK, CWM, etc) so you have to start from scratch to get anything (aside from winmo 6.x)
good luck