Related
phone was working fine up until yesterday it frooze up then resarted and magldr went go go go then fatal hit 1 after that. Tried restarting it but notthing seemed to help. I tried to reflash a winmo rom but that kept hanging at the htc screen tried task 29 reflashing custom and stock winmo roms but nothing seems to work phone still goes to the bootloader and still hspl anyone have any idea how to fix this i am stumped??
MAZDROID said:
phone was working fine up until yesterday it frooze up then resarted and magldr went go go go then fatal hit 1 after that. Tried restarting it but notthing seemed to help. I tried to reflash a winmo rom but that kept hanging at the htc screen tried task 29 reflashing custom and stock winmo roms but nothing seems to work phone still goes to the bootloader and still hspl anyone have any idea how to fix this i am stumped??
Click to expand...
Click to collapse
i got this a couple times made me freak out too
all i did is removed the battery and it worked afterwards
did u try flashing a new nand android?
Yea i did but i still kept getting the same error should i try a different nand rom?
and after i reinstall a new nand rom its gets the the "reset now!" and just sits there
MAZDROID said:
and after i reinstall a new nand rom its gets the the "reset now!" and just sits there
Click to expand...
Click to collapse
Try going to bootloader - hold vol. down and press and release the power button
Then try flashing radio, hspl.2.08 and then magldr 1.11
This might help
heck i tried reflashing the radio and the hspl and the magldr all of its goes fine until when i try to install a nand rom once i do that i gets all the way to the "reset now!" and just stays there at this point i just want to get a stock winmo rom back on so i can atleast make calls this phone is my only form of communication
MAZDROID said:
heck i tried reflashing the radio and the hspl and the magldr all of its goes fine until when i try to install a nand rom once i do that i gets all the way to the "reset now!" and just stays there at this point i just want to get a stock winmo rom back on so i can atleast make calls this phone is my only form of communication
Click to expand...
Click to collapse
What is your HSPL version ? Its written on the tricoloured screen of the bootloader ? Your phone was unlocked before you tried to flash a NAND ROM ?
Try and use a task29 tool provided here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 . Extract it and run it properly ( with phone in bootloader mode ) and perform the task 29. Then flash a radio version which you can find it here http://forum.xda-developers.com/showthread.php?t=611787 . ( I suggest 2.14.50.02 )
My suggestion is to go to bootloader-tricoloured screen ( NOT Magldr ). Flash a good radio version and afterwards go back to tricoloured screen of the bootloader in order to flash a Windows Mobile ROM ( preferably a STOCK one ). Forget about NAND ROMs until you will be sure what your problem is.
PS : Very very important read for 2-3 hours ( to understand well ) what says here http://forum.xda-developers.com/showthread.php?t=609477
viperd said:
What is your HSPL version ? Its written on the tricoloured screen of the bootloader ? Your phone was unlocked before you tried to flash a NAND ROM ?
Try and use a task29 tool provided here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 . Extract it and run it properly ( with phone in bootloader mode ) and perform the task 29. Then flash a radio version which you can find it here http://forum.xda-developers.com/showthread.php?t=611787 . ( I suggest 2.14.50.02 )
My suggestion is to go to bootloader-tricoloured screen ( NOT Magldr ). Flash a good radio version and afterwards go back to tricoloured screen of the bootloader in order to flash a Windows Mobile ROM ( preferably a STOCK one ). Forget about NAND ROMs until you will be sure what your problem is.
PS : Very very important read for 2-3 hours ( to understand well ) what says here http://forum.xda-developers.com/showthread.php?t=609477
Click to expand...
Click to collapse
thanks man i followed your instructions and i am now back into winmo thanks a million times
MAZDROID said:
thanks man i followed your instructions and i am now back into winmo thanks a million times
Click to expand...
Click to collapse
I am having the same problem.
@ MAZDROID: Can you tell me the steps you did to recover your phone?
Thanks a lot.
Are you using the stock usb cable that came with the phone or some generic one?
There seems to be slight corruption while you are flashing the ROM.
Try using memtest86+ and test your computer's RAM.
LiFE1688 said:
Are you using the stock usb cable that came with the phone or some generic one?
There seems to be slight corruption while you are flashing the ROM.
Try using memtest86+ and test your computer's RAM.
Click to expand...
Click to collapse
Thanks for reply. I did not use the stock usb cable, but it was the same with the factory usb cable.
I got this problem when tried to install WP7, then got "fatal hit 1 error" when booting WP7 for the 1st time.
Now my phone is bricked with T-mobile logo. Tried to HSPL, fash radio, flash OS (with the stock one) by task 29 many times, but it did not work. All flash process are okie, but My phone is still bricked
Any way to bring the phone to factory settings? Need help for an advise. Thanks a lot
Is your's one of those 1024MB ROM T-Mobile HD2s?
I am not sure if the the SD leoimg.nbh recovery method works. It flashes the SPL back to Original, including Firmware, and RADIO.
If your HD2 only has 512MB ROM, then just download the Official HTC HD2 ROM from HTC's support site (If it is UK, then select UK, if it is USA, you are kinda S.O.L.)
Extract the RUU(something).exe file using WinZIP or WinRAR or 7-ZIP.
There will be a RUU_signed.nbh file, rename that to leoimg.nbh and put that in the ROOT folder of your FAT16/FAT32 MicroSD Card.
While holding the Volume Down button, power up the device.
It should detect the LEOIMG.nbh file and flash everything back to default.
*WARNING*
Make sure your HD2 has 512MB ROM, NOT 1024MB ROM
Make sure your MicroSD Card is formatted in FAT32 or FAT16
Make sure the the Official RUU ROM is v1.xx and NOT v3.xx
Good Luck!
BTW: The Stock Cable seems to have a DIODE soldered to it. Regular cable is fine, but it doesn't protect it from current back flow during charging.
I started with a task29 then flashed a new radio and then I reloaded a stock rom via usb since i couldn't get it to work via sd card. I was able to get the phone to start but i still am running into problems when flashing in general with the phone on multiple computers so part of the problem was solved but every now and again it just shuts of and i have to reflash
LiFE1688 said:
Is your's one of those 1024MB ROM T-Mobile HD2s?
I am not sure if the the SD leoimg.nbh recovery method works. It flashes the SPL back to Original, including Firmware, and RADIO.
If your HD2 only has 512MB ROM, then just download the Official HTC HD2 ROM from HTC's support site (If it is UK, then select UK, if it is USA, you are kinda S.O.L.)
Extract the RUU(something).exe file using WinZIP or WinRAR or 7-ZIP.
There will be a RUU_signed.nbh file, rename that to leoimg.nbh and put that in the ROOT folder of your FAT16/FAT32 MicroSD Card.
While holding the Volume Down button, power up the device.
It should detect the LEOIMG.nbh file and flash everything back to default.
*WARNING*
Make sure your HD2 has 512MB ROM, NOT 1024MB ROM
Make sure your MicroSD Card is formatted in FAT32 or FAT16
Make sure the the Official RUU ROM is v1.xx and NOT v3.xx
Good Luck!
BTW: The Stock Cable seems to have a DIODE soldered to it. Regular cable is fine, but it doesn't protect it from current back flow during charging.
Click to expand...
Click to collapse
Thanks, but mine is 1024MB ROM T-Mobile HD2s. Now whatever I flash the phone, it is still bricking, so i think it would work if I removed HSPL and bring it to the default factory.
Any idea to do this?
MAZDROID said:
I started with a task29 then flashed a new radio and then I reloaded a stock rom via usb since i couldn't get it to work via sd card. I was able to get the phone to start but i still am running into problems when flashing in general with the phone on multiple computers so part of the problem was solved but every now and again it just shuts of and i have to reflash
Click to expand...
Click to collapse
I did task 29, then updated radio 2.14 for T-MOUS, but tri-color boot loader sill comes with HSPL 2.08 which means radio was still 2.08? Then I updated factory ROM ship (OS 3.4 and radio 2.14). I can not find a Rom with only OS (not including radio)
Did you get the change of radio to 2.14 in boot loader? Where to download a factory ROM with OS for T-MOUS?
Thanks
Well, this is the thing, T-MOUS controls the ROM releases. The deal they have with HTC refrains HTC from releasing or hosting any of the ROMs. So they should be hosted on T-mobile US website.
Anyways, from what I know, there are only 3 releases so far for US T-Mobile HD2
2.10.531.1
2.13.531.1
3.14.531.1 <--- DO NOT GET THIS ONE (Contains SPL 3.03 cannot be flashed to HSPL 2.08)
After you do a RECOVERY using the bootloader, you will have to reflash the radio to one that is compatible with Android, after that you reflash the radio to one that can be used by Android. Then you install MAGDLR.
I vaguely remember rumors that using a T-mobile will lock the phone to only T-mobile. If you have an sim unlocked T-Mobile, you might lock it again.
Please do so in that order.
BTW: If your phone still can get to the BootLoader (TRI COLOR SCREEN), it is not bricked, it is just not behaving. Bricked means you can't even turn it on for some people.
OMG, they are... LOL!
http://www.t-mobile.com/wmupgrade/
My phone just reborned now. Thought it was totally die when stucking with "stick together" logo. Here are the steps I did.
1) Redo exactly step by step in this post (focus on steps: HSPL, campatible ROM, hard-reset, remove/reinstall memory card + Sim)
http://forum.xda-developers.com/showthread.php?t=609477
2) Try with different SIM CARDS for your phone. I tried 5-6 ATT cards, and only 1 works and helps to go through stick together logo. If you see these words R G B at the bottom, then you phone revives.
SO happy now! Thanks all for your previous posts
No luck
I've tried everything but nothing.
I Get the "Fatal hit 1" when I'm trying to enter AD Recovery.
I'm not able to boot it with WM stock - it just get stucked att the first HTC screen.
Anyone has an idea on how to solve this?
I've have made a few steps several times but still nothing, starting to get frustrated.
Try to flash a different size partition of cwm, see if that will get you in clock work recovery...
Sent from my HTC HD2 using XDA App
kompheak said:
Try to flash a different size partition of cwm, see if that will get you in clock work recovery...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thank you so so much! It worked!
This is how I did for you other guys how's experience the same issue.
I did all this with the HD2 Toolkit.
1. Wipe Task 29
2. Install HSPL 2.08 HSPL (Don't now if this is needed but did it anyway)
3. Install MAGLDR
4. MAGLDR Reperation with Partition 200MB Cache 8MB
Now I was able to enter AD Recovery and install zip from SD card.
Android is loading at the moment and now it started up!
Thanks once again!
Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Abagnale said:
Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Click to expand...
Click to collapse
Don't use MAGLDR to flash your ROM. Hold the Volume Down rocker when you turn you phone on to access the bootloader (tri-color screen) and then plug your phone into your computer via USB. You should then be able to flash your stock ROM with no trouble.
Alternative: To go full stock, including going back to the stock SPL, check my signature for a link on flashing via the SD card.
Thank you for you reply After several attempts I managed to get my winmo back on via SD because RUU couldn't see my phone
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!
Abagnale said:
Thank you for you reply After several attempts I managed to get my winmo back on via SD because RUU couldn't see my phone
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!
Click to expand...
Click to collapse
Yeah you lose everything. Yeah, if you needed to send it away now, you could as it has stock everything. May I ask, why did you install MAGLDR then not even use it properly? What were you trying to do? Dual boot WP7 & Android?
thanks!
Don't you worry I was doing everything by the book
Maybe you know why MAGLDR was turnin on even when I didn't hold the power button ?
Abagnale said:
thanks!
Don't you worry I was doing everything by the book
Maybe you know why MAGLDR was turnin on even when I didn't hold the power button ?
Click to expand...
Click to collapse
When MAGLDR can't find anything to boot up (no properly installed ROM) it defaults to the same menu you see when holding the power button down.
It's strange cause the ROM was flashed properly, at least I think so. It was working properly...
MAGLDR was probably turning your phone in because it was connected to a power source. This had to be done because there was a bug in the old Magldr where you had to keep pulling out the battery. It doesn't go to the bootloader (HSPL) though. It'll boot up and say kernel failed.
What are you trying to do now, reinstall magldr?
Tried couple times and I didn't manage to install Android using MAGLDR 1.13 and CMR.
Now I'm back to WinMo and done for now with flashing Android. Don't want to have an expensive paper holder.
You probably had the wrong partition size in CWM.
I don't think there is really a way of bricking your phone doing this other than flashing an imcompatible radio. I've never had any trouble with flashing with CWM or MAGLDR. You say in your first post, you were trying to boot SD AD? You know that's not for .zips from CWM? That's for people who want to dual-boot WP7 and Android, you have to boot AD NAND for CWM.
CWM was already prepared by the developer
Oh...I was following the video tutorial and the guy gets into the recovery mod by getting into the SD AD
http://www.youtube.com/watch?v=-pxucOLY488
Actually I stuck at that point
That's the old way! There's a new way where you just flash a DFT and you go to AD Recovery in magldr an poof! CWM.
Here's the thread just incase you feel like doing it. http://forum.xda-developers.com/showthread.php?t=898913
Don't forget to update your HSPL and radio before doing anything though as you're back on sh*tty WinMo.
I will check on it since you're encouraging me not to give up
Ha ha! Yeah, well I like helping people and Android is just a way better OS then WinMo. Any troubles, just post here and I'll try to help.
Thanks mate, really appreciate your help
No problem. So did you get it working yet or what?
PS. don't forget that thanks button if I've helped. ;D
Not today mate, maybe tommorow will let you know
[EDIT] Wait...today is "tommorow" so "maybe later" I'd say
did it already post #12
Nice... You might aswell do it now then... so you can spend tomorrow looking for apps and getting used to Android.
If I wouldn't have to write my MA dissertation, I would have my HD2 running Android by now
Have you tried it yet?
I'm currently having problems with my HD2 too.
Let's hope this stock ROM works.
Ok basically my phones completely Bricked.
It turns on and shows the HTC Logo and then sits there and does nothing.
I can get the phone into the Rainbow Bootloader however then it won't connect to my computer.
Im pretty sure the phone originally had Android 2.2 however that's all messed up and gone.
Is there a way to completely wipe and then reinstall Android or even the Original WM 6.5?
Im stuck here guys. The phone is a USA T-Mobile Leo.
Cheers
no your phoine is not bricked, if it was bricked it wouldnt even turn on
so you boot intothe boot loader plug inthe usb cable and does it change from serial to usb?
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
joooe said:
Flash the phone through the sd card.
Try Energy Rom here:
http://hotfile.com/list/588162/580b43d
Download the file Energy.Leo.29017.Sense2.5.Cookie.2.0.Mar.15.7z
Uncompress the archive. Put the file "leoimg.nbh" in the root of the sd card and go to bootloader (hold volume down key and soft reset).
Click to expand...
Click to collapse
It should be an official rom, shouldn't it ?
kawazaki said:
It should be an official rom, shouldn't it ?
Click to expand...
Click to collapse
Probably yes. Sorry, then.
Either way, he can still download the official rom .exe file and uncompress it with winzip or winrar. After that, he should find the .nbh file and rename it to "leoimg.nbh" and put it in the sd root.
Hi there,
Yes i have downloaded the Official ROM from T-Mobile.com and entered my IMEI, so i suspect its the correct one.
Tried updating from the Computer and it got to 5% and then said Update Failed.
I also tried doing it from the SD Card the way you guys said to, it worked once, it got to about 3% and said something about Invalid Radio.
I'm guessing this should have worked, however it didn't
Any idea why??
Cheers for your help Guys
PS: When i load into BootLoader mode it does come with with Serial and then USB.
However it also now since the update failed comes up with 'Upgrade ROM Code Error, Please Try Again "
I Get Error Code 284 on the update utility
Cheers
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
pandollar said:
Can you not try to flash a different radio, and then try and flash a stock Rom, it might work. Or if it will let you, task20-radio-magldr
Click to expand...
Click to collapse
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
willymanilly said:
So do you have any idea which one i need to flash for T-Mobile USA HD2??
Also do i do this by the SD Card Method? Because i think thats all i can do atm.
Cheers
Click to expand...
Click to collapse
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
T-Macgnolia said:
The current T-Mobile radio version is 2.15.50.14. If you downloaded the update ROM from T-Mobile thin this radio version is included with it.
When in bootloader what SPL or HSPL do you have? If it is not SPL 3.03.0000 OR SPL 3.03 HSPL then thos is your problem. The current T-Mobilr ROM is a 3.14 ROM and all 3.14 ROMs require one of these SPL versions to flash. You can change it after you flash.
I also recomend you run a task 29 on hour HD2 and then reflash the 3.14.T-Mobile ROM. You can do this via SD card as well. You can even flash MAGLDR ia SD card.
Click to expand...
Click to collapse
ATM My SPL is 2.9
I think it may be corrupt, i took my phone into a phone repair shop and they had no idea how to fix it either.
So does anybody have some detailed instructions on how to do this, id love to get it going!
Cheers
It has to be the radio. If I'm not mistaken you flash the radio just like a ROM.
Here a thread with alot of Radios. Look for the one that says 2.15.50.14 Radio or something similar theres instructions in the thread.
THREAD: [RADIO] The HTC HD2 Master Radio Thread
Good luck!
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
happyhallsy8 said:
sounds like nand coruption or a dodgy cable...
You'll need to flash original Rom from SD Card
Format your SD Card under windows down to FAT32 original allocation size.
extract the contents of the installer that you've downloaded from TMobile
copy RUU_signed.nbh and then rename it to leoimg.nbh
now im pretty sure you hold either the Up volume + Power until you get to a grey screen and follow prompts.
OR
up volume + down volume + Power
You do those combo's as you turn on the phone and hold untill the applicable screen comes up.
Click to expand...
Click to collapse
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
T-Macgnolia said:
It is neither of those you give. You hold the volume down button down while powering on to get to bootloader, the grey screen is automatic when bootloader detects the leoimg.nbh file on the SD card. Also you just have to press the power button down like you would to normally turn the phone on, it is the volume down button you have to keep pressed down until you see bootloader. If you hold both the volume up and down buttons down while powering on it will go to the hard reset function.
Click to expand...
Click to collapse
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
willymanilly said:
I have tried flashing from the SD Card many times, it just comes up with Failed, BAD Radio etc.
THis is getting really frustraiting
Click to expand...
Click to collapse
Ok are you sure you have SPL 2.09 on your HD2 cause it should be one of these?
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
If you have that SPL you might have to flash a older ROM to get another SPL version that will let you flash HSPL as SPL 2.09 will not and I have not heaerd of that SPL so it must have been like a test SPL or something.
Go to "Leo 1.5 T-MOBILE Test & Stock ROMS"and start at the 2,07 ROM, download it and try to flash it via USB and SD card. If no joy, move to 2.09 ROM, if now joy with it move to 2.10.0 ROM and so on and so on until you get one to flash. try both flash methods with both.
Do not, I repeat do not flash or even download for that matter the 2.01 ROM marked not for TMOUS as it will brick/KILL your your HD2!
Recommendations from the SD flash your machine
Okay guys, am I screwed?
I tried putting android on this HD2.
I successfully installed HSPL 2.08 HSPL (So NO 2.08.0000)
Then I tried installing MAGLDR 1.13, just by executing the ROMUtilityUpdater.exe.
Clicked the first checkbox, then the 2nd, and then that 'Update' thingy.
It was going to updating from 1.72.XXXXX to 2.00.0.000 (or something)
I had it connected through Activesync (WinXP).
It was ready in 30seconds, instead of the normal 10 minutes.
Now it just hangs on the White HTC bootscreen.
I tried doing a Task29, but in the RGB Bootloader (USB connected) screen it won't connect to ActiveSync. I Ran it anyway, but still no Windows or MAGLDR.
Do I need to install a different Radio? If so how do I do that and where can I find it?
I am downloading a stock WinMo 6.5 Rom (vodafone branded, from HTC.com)
Thanks for all the help in advance!
had simillar problem. I would just install the latest Windows ROM 3.03 but thru SD card (Download official 3.03 ROM for Your phone, extract it, change the nbh file name to LEOIMG, put it on Your SD card, Switch the phone on holding volume button down, and then go with the instructions on the screen) cuz it changes Your SPL, then install HSPL 4. After that install CLK and CLOCKWORK and then NAND Your device with clk version android.
Look here http://forum.xda-developers.com/showthread.php?t=1021837 if You dont know how to install clK. It is a bit complicated but if You are a bit computer literate You should be ok.
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
wouternet said:
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
Click to expand...
Click to collapse
Hi,
Go HERE
Stock ROMS always save the day haha
Thanks brother
All HTC phones have tiny screws which helps the body stay together. So yes every HTC phone is Screwed
Hi all,
I would like to ask someone who are willing to lend me a hand.
Here comes the problem:
1. I wanna flash a NAND Android into my HD2 (not Tmous)
2. I have already flashed with HSPL2 with selection of 2.08 HSPL.
3. It went through to Windows Mobile again, nothing goes wrong untill when I am trying to flash with Magldr Bootloader with ROM Update Utility.
4. It went through again, after that the phone reboot itself and it should be displaying Magldr bootloader instead of HTC green logo stuck at the WHITE SCREEN.
5. I've tried several ways to solve it including soft-reset but still nothing happen with the same problem which is the green HTC logo stuck at the white screen.
6. Even Hard-reset with factory default reset I have tried, the process went through, but still the same problem again (YOU GUYS KNOW WHAT I MEANT).
7. So, I tried another LeoAdvanceRUU.exe which @HD2Owner had posted few months ago, the flashing process worked through but it stucked at the 0% with HTC logo at BLACK screen.
8. I kept on trying with another ROM or Radio Flashing again, again and again and it is still stucked at 0% !!! (GOSH !! I'm going to be crazy)
I really hope someone can help me out of this as I am very appreciate to those who are willing to help me. I need the phone to deal with my daily usage, please the 'PRO's out there.. ><
Thanks in advance.
P/S: The Tri-Color mode showed PB8100 - SS-BC
Did bootloader show 'SPL2.08HSPL' (or something along those lines)?
Nigeldg said:
Did bootloader show 'SPL2.08HSPL' (or something along those lines)?
Click to expand...
Click to collapse
Yes !! It does showed..coz its already HSPL-ed..but i stil duno what is happening..
you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start
I dont drink either LOL
samsamuel said:
you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start
Click to expand...
Click to collapse
erm, I also tried to Flash the Radio ROM, but it will stucked at HTC logo with Black Screen and also 0% wont move either..
In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)
samsamuel said:
In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)
Click to expand...
Click to collapse
yea i did install the HSPL before flashing the radio and it is done with 2.08 HSPL
but what do u mean by Radios news HSPL?
when I am flashing the radio in the bootloader, I used the common flashing technique which is using the CustomRUU with the RUU_Signed.nbh file which contains Radio 2.14.50 and then the only the problem came out.
by means every ROM that I am trying to flash, It will still stuck at 0% Black Screen with HTC logo..
oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.
samsamuel said:
oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.
Click to expand...
Click to collapse
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??
no, no usb needed, put the leoimg on the sd card, card into phone, power on phone holding voldown, bootloader finds the leoimg on the card and starts the flashing process.
eXcMichael said:
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??
Click to expand...
Click to collapse
OK THAT'S WORKING @samsamuel !!!!!
THANKS ALOT !!!
I also assume the Radio was not flashed but i just cannot find a way to do the flash, and my troubleshooting was correct.
THANKS ALOT especially @samsauel and other devs' assistance. Highly Appreciate for what you guys contributed.. really THANK YOU, ITS NOW RUNNING Hyperdroid GBX ~
Thread can be closed and for further reference.
Look for HD2 nand toolkit 4.1 on XDA developers
It's a all in one utility hand HD2.
You can also try the we site addictive tips.com , they step by step tutorials.