Database Users

Wsod htc hd2

Before I start I googled and tried methods I could and all failed.
My phone was working Link Hereperfect with no issues I had installed the DFT LEO Stock Desire NAND Rom.
A week ago it died and I charged it and powered it back up and got the white screen. It wouldnt go away until I pushed the yellow button on the back. Problem solve I would think.
Two days ago on my way to San Francisco it restarted and turned white. I tried all methods I found here and google none work. when I hold the down vol button I do get the 3 color screen and thats it. I attached an picture of what my phone says.

bump please help

isaiah33 said:
bump please help
Click to expand...
Click to collapse
bump for what? You are just stating what happened to your phone.

My boys hd2 did this too... I plan on doing some extensive trouble shooting later this week so ill try to help you out if I can get it fixed. I guess, bottom line is, if you want android, buy an android device. ;-P
Sent from my HTC Glacier using XDA App

help us to help you
@jose makalolot
I like your answer... full of sense
@isaiah33
Do you realize that you didn't ask anything?
Do you post these nice explanations to inform us that stopping a device by removing suddenly its power supply is not good?
Then ok, thanks. Ask for a sticky.
@crx4xharder
If you're boy's phone can only boot in the first level loader... I think a week-end if long enough to make extensive trouble shooting
Ok, I agree I'm not nice... it's just to make you realize that if you want to ask someting... then ask, no need to make us imagine the question you may want someone to answer.

My question is how do I get this fixed? How do I get android back up and running. I want to get rid of this white screen.

isaiah33 said:
My question is how do I get this fixed? How do I get android back up and running. I want to get rid of this white screen.
Click to expand...
Click to collapse
What was the version of MAGLDR you had anyway? The ROM you are/were running is outdated by today's standards anyway.
I would do a task29 and start over. Then flash MAGLDR 1.3, CWM 1.3 and then a new ROM.

isaiah33 said:
My question is how do I get this fixed? How do I get android back up and running. I want to get rid of this white screen.
Click to expand...
Click to collapse
If you get bootloader simply flash a stock WM rom or MAGLDR, whats hard about that?

i tried flashing with task29 but it sticks at 0%

Do not use task29 for your problem. Fortunatly it doesn't "clear" the first level bootloader.
Press the vol-down key.
In boot loader, flash:
a/ a WM6 ROM (to do this you can just put a LEOIMG.nhh on the root of your SD)
b/ MAGLDR (the version you need for the build you want)
If you want to put a DFT build. In MAGLDR (so press "end call" and start the phone... keep end call pressed) choose the option "USB flasher" (something like this.
With DFT (in admin) flash:
a/ a DFT build
b/ CWM
If CWM, boot in MAGLDR, choose "AD Recovery" (for CWM 1.13)
In CWM choose the option to flash a zip build.
That's all... good question, good answer.
All what I said if well expained in diffferent sticky. You will find there a lot of step-by-step or video explanations.
Hope this helps.

He doesn't need to clear the first-level bootloader. You can see from his screenshots that he gets into the bootloader just fine. Task29 will format the NAND storage just as flashing a WinMo ROM does. The RUU does a task29 as part of the flashing process anyway. Doing just a task29 saves the time of flashing the ROM.
Either way, you don't "flash" task29. You run the command via mtty. I'm not sure I understand exactly what you're saying when you "flash" task29 and it stayed at 0%.

What was the meaning of my "Fortunatly"
Clear the first level... brick the phone.
So for you task29 is equivalent to flashing a WM?
With or without radio?
(real question, I really don't know exactly what it's doing...)
I know that it "cleans" the NAND but it's not enough for me.
Anyway, I realize it will be better for me to read the dedicated thread or search on google.
For him I keep my advice to do all (task29, full flash from the beggining including WM). It's useless normally but as he has a problem...

Digital Outcast said:
He doesn't need to clear the first-level bootloader. You can see from his screenshots that he gets into the bootloader just fine. Task29 will format the NAND storage just as flashing a WinMo ROM does. The RUU does a task29 as part of the flashing process anyway. Doing just a task29 saves the time of flashing the ROM.
Either way, you don't "flash" task29. You run the command via mtty. I'm not sure I understand exactly what you're saying when you "flash" task29 and it stayed at 0%.
Click to expand...
Click to collapse
For HD2 "mtty" is not required, there is a task29 nbh.

truc007 said:
Do not use task29 for your problem. Fortunatly it doesn't "clear" the first level bootloader.
Press the vol-down key.
In boot loader, flash:
a/ a WM6 ROM (to do this you can just put a LEOIMG.nhh on the root of your SD)
b/ MAGLDR (the version you need for the build you want)
If you want to put a DFT build. In MAGLDR (so press "end call" and start the phone... keep end call pressed) choose the option "USB flasher" (something like this.
With DFT (in admin) flash:
a/ a DFT build
b/ CWM
If CWM, boot in MAGLDR, choose "AD Recovery" (for CWM 1.13)
In CWM choose the option to flash a zip build.
That's all... good question, good answer.
All what I said if well expained in diffferent sticky. You will find there a lot of step-by-step or video explanations.
Hope this helps.
Click to expand...
Click to collapse
I tried updating the stock rom and it has a issue when it comes to the radio it says Radio Fail. This is the right rom I downloaded it off the tmobile website. I dont know why its failing. If you could help truc007 I am willing to help donate to you if I ge it working.

I couldnt flash the task29 so I ran the commands in mtty and flashed a rom and booted, still wsod...

Just flash back to the original ROM, then update radio, install magldr.

isaiah33 said:
Before I start I googled and tried methods I could and all failed.
My phone was working Link Hereperfect with no issues I had installed the DFT LEO Stock Desire NAND Rom.
A week ago it died and I charged it and powered it back up and got the white screen. It wouldnt go away until I pushed the yellow button on the back. Problem solve I would think.
Two days ago on my way to San Francisco it restarted and turned white. I tried all methods I found here and google none work. when I hold the down vol button I do get the 3 color screen and thats it. I attached an picture of what my phone says.
Click to expand...
Click to collapse
OK, send to me to fix it!

[Q] Can't flash stock rom after flashing MAGLDR

Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated

Abagnale said:
Ok guys please help me since I couldn't find the answer
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash winmo stock rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Click to expand...
Click to collapse
While your Pbone is off hold the volume down button and momentaraly press the power (end) button this should make the bootloader come up (tri color screen). Once in bootloader plug your USB cable into the computer and phone. wait until you see USB in the white bottom bar of the phone screen and then run the RUU or exe wich ever one you have for the ROM you want to flash, this is for Windows Mobile ROMs only though.
If you want you can use a micro SD card to flash the ROM also. You need a 4G or smaller SD card to do this though the 16GB card that comes with the TMOUS HD2 generaly will not work but you can try it. Take and find the RUU_signed.nbh file in the Rom folder you have, it may not look exactly like that but it will have RUU and .nbh in it. Rename the file leoimg.nbh and copy it to your SD card and repeat the process to go into bootloader and as soon as you see searching appear on your phone screen release the volume up button and the ROM will flash it just might take alittle longer for the ROM to complete the flash this way as compared to using a computer to flash.

Thank you for you reply After several attempts I managed to get my winmo back on
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!

Abagnale said:
Thank you for you reply After several attempts I managed to get my winmo back on
Two questions: So do I still have MAGLDR and CMR after flashin' that stock rom ?
I can see in the bootloader that I'm back on SPL 3.03. Does that mean that I'm back on warranty and HSPL2 is uninstalled?
Thanks!
Click to expand...
Click to collapse
Yes you lost MAGLDR, HSPL, and CMR when you flashed the stock ROM. If bootloader is showing SPL 3.O3.OOOO then you are stock once again You can always be double sure of this by downloading HSPL 4and run it, when it ask you what version you want to install select 3.03.0000. The ones with SPL and the x.xx.0000 are all stock SPLs but 3.03.0000 is the latest stock SPL.

Thanks you've calmed me down

Abagnale said:
Thanks you've calmed me down
Click to expand...
Click to collapse
You are very welcome,happy to be of help.

Appreciation
Thanks so much for the 4g micro sd card suggestion. I was really starting to think I'd stuffed my phone. I had been trying to flash a stock rom using a 16g micro sd card & of course having no luck. So glad I found this thread, keep being a superhero

[Q] Can not enter MGLDR menu after installation

Hi
I have followed a description how I could install android on my phone
http://forum.xda-developers.com/showthread.php?t=893948
All workss fine until I have to enter the MGLDR menu with a long push on the power button... I dont enter any menu!! I have tried a lot of times without luck.
I have the latest Radio version 2.15.50.14
and the HSPL version 3.03 HSPL
What have I done wrong since I cant enter the menu?

If I remember right, you need to have hspl 2.08 on your phone for MGLDR to work. Try finding MGLDR thread and see if I'm right. Or just change your hspl to 2.08 and see if you can get the menu, remember, hold the power button til the menu shows then let go. It won't show just by holding the button for longer then normal power on push.
Sent from my HTC HD2 using XDA App

yea, gotta be 2.08.hspl no other will do. Its is step 2 of the instructions you linked to, i can see how your mind may have wandered so far into the process, ,
hehe

Thanks a lot to both of you now it works.... and yes I may have to fast since I didnt see the correct version.
)

hi guys, having a similar problem with my phone atm. I have 2.08 hspl and the right radio, i just cant enter magldr menu at all? holding down the power does nothing, it just boots the phone with no menu at all.

Brandon911 said:
hi guys, having a similar problem with my phone atm. I have 2.08 hspl and the right radio, i just cant enter magldr menu at all? holding down the power does nothing, it just boots the phone with no menu at all.
Click to expand...
Click to collapse
When you say "it just boots the phone",,, how far does it get?

samsamuel said:
When you say "it just boots the phone",,, how far does it get?
Click to expand...
Click to collapse
to the o2 blue initial screen, thats it :s

right, and at the end of that screen should flash up magldr, which indicates it either didnt take, or there is a mismatch with spl/radio.
id start over, into bootloader, check and double check it says 2.08.hspl and nothing else, flash a known good radio again, then flash magldr again.
If it hasnt taken again, or you get any kind of error when flashign teh radio, its just possible theres a stuck radio issue, which prevents anything else from flashing. there are threads where flashing looks to work but nothing actually changes.
to test for that, try changing the spl with hspl4, doesnt matter what you change it to, just change it, reboot, into bootloader, make sure it changed.
Failing that, its stock winmo from sd card time, and start truly over.

could you possibly link me to the right stock rom? im on 02 hd2 in england, ill flash it via sd card with the nbh file. im having so much trouble getting hold of it, im litteraly tearing my hair out, becuase i think ill have to start over after all, last resort. thanks so much if you can

Brandon911 said:
could you possibly link me to the right stock rom? im on 02 hd2 in england, ill flash it via sd card with the nbh file. im having so much trouble getting hold of it, im litteraly tearing my hair out, becuase i think ill have to start over after all, last resort. thanks so much if you can
Click to expand...
Click to collapse
if you're sure you have the right radio and HSPL 2.08, and you're having issues, just perform a task 29, it will format the internal rom partition of the device, then reflash MGLDR 1.13 it will respond then, flash CWM, and desired rom.
Task 29 will help you prevent having to go back to stock.

[Q] Urgent Help Needed

So i tried flashing an android ROM but its stuck on the AD recovery go go go screen.
I also wanna task 29 but I don't know how to get to the bootloader from MAGLDR 1.3
someone help please !

ummm i dunno if magldr can switch you into the bootloader, but doesn't the regular way to get to the bootloader work?
regular way:
1. make sure phone is OFF...take out the battery and plug it back in to make sure
2. hold down the volume down button
3. tap the power/end call button to power on the device
4. keep holding down volume down button
...bootloader should appear!
i guess you are a senior member so you must be looking for something else, it can't be as simple as above, is it?

ASCIIker said:
ummm i dunno if magldr can switch you into the bootloader, but doesn't the regular way to get to the bootloader work?
regular way:
1. make sure phone is OFF...take out the battery and plug it back in to make sure
2. hold down the volume down button
3. tap the power/end call button to power on the device
4. keep holding down volume down button
...bootloader should appear!
i guess you are a senior member so you must be looking for something else, it can't be as simple as above, is it?
Click to expand...
Click to collapse
i tried that...despite it...it goes to the MAGLDR menu
and USB flasher keeps saying WAIT USB !!

basically I am stuck in MAGLDR

someone please help
i downloaded HD2 NAND kit...
and was ablt to reformat the Magldr Partition...
that time somehow the USB flasher seems to work,,,
however for every other function...it fails...like task 29 etc..
i am really confused and don't know what to do !!

backlashsid said:
someone please help
i downloaded HD2 NAND kit...
and was ablt to reformat the Magldr Partition...
that time somehow the USB flasher seems to work,,,
however for every other function...it fails...like task 29 etc..
i am really confused and don't know what to do !!
Click to expand...
Click to collapse
Mate,
how about flashing stock rom via SD? dont use your old sd, get the new one, and try to flash the stock rom.
If you can pass that, then you can go back to try magldr again
or else,
I think it may be a hardware issue related, may be the volume down button is damaged. If this the case, since you are in android nand, you cant flash stock rom from USB sync
I hope that is not the case though
goodluck

silverwind said:
Mate,
how about flashing stock rom via SD? dont use your old sd, get the new one, and try to flash the stock rom.
If you can pass that, then you can go back to try magldr again
or else,
I think it may be a hardware issue related, may be the volume down button is damaged. If this the case, since you are in android nand, you cant flash stock rom from USB sync
I hope that is not the case though
goodluck
Click to expand...
Click to collapse
surprisingly the VOL DOWN key is not at all damaged..
cos in the magldr menu I am able to go down and choose USB Flasher
I tried to install the DESIRE STOCK NAND ROM by clicking on DDAF and it worked
howerver the ROM got stuck at the DFT logo
ALso I am not at all able to get to the bootloader screen !! any ideas what to do ??? i guess flashing via SD wont work if I cant get to the bootloader
EDIT: I am able to install DAF.exe type ROMS...just installed Windows Phone 7 works...but the problem still is me wanting android and preferably at a time the old win mo...and without bootloader dont know what to do !! Help

backlashsid said:
surprisingly the VOL DOWN key is not at all damaged..
cos in the magldr menu I am able to go down and choose USB Flasher
I tried to install the DESIRE STOCK NAND ROM by clicking on DDAF and it worked
howerver the ROM got stuck at the DFT logo
ALso I am not at all able to get to the bootloader screen !! any ideas what to do ??? i guess flashing via SD wont work if I cant get to the bootloader
EDIT: I am able to install DAF.exe type ROMS...just installed Windows Phone 7 works...but the problem still is me wanting android and preferably at a time the old win mo...and without bootloader dont know what to do !! Help
Click to expand...
Click to collapse
Hey blackashsid, sorry to hear you are having troubles. Without being able to get to the SPL bootloader you will not be able to flash any .nbh file to your HD2. This translates to you not being able to flash a Windows Mobile ROM stock or custom, a different radio version, splash screen, any HSPL or SPL, or cLK. And yes flashing via SD card is no good to you without the SPL bootloader.
Option #5 USB Flasher in MAGLDR will only flash CWM or A DAF ROM.
Your issue is somewhat strange to me, I really don't understand why you are having this issuer unless it is hardware related.

T-Macgnolia said:
Hey blackashsid, sorry to hear you are having troubles. Without being able to get to the SPL bootloader you will not be able to flash any .nbh file to your HD2. This translates to you not being able to flash a Windows Mobile ROM stock or custom, a different radio version, splash screen, any HSPL or SPL, or cLK. And yes flashing via SD card is no good to you without the SPL bootloader.
Option #5 USB Flasher in MAGLDR will only flash CWM or A DAF ROM.
Your issue is somewhat strange to me, I really don't understand why you are having this issuer unless it is hardware related.
Click to expand...
Click to collapse
yeah its strange !
its like i am stuck with MAGLDR
and ders no way to uninstall it or to get to the bootloader for a WM ROM !!
any ideas what is causing this ??
i will really appreciate it !
EDIT: also i noticed all of my DAF ANdroid ROMS get stuck at the splash screen...only WP7 made it !! i want android !
any reason why this happend ?

if you installed wp7 then it isnt an issue wth the phone, its quite possible the roms you are trying to install

Download again the rom you want to use... and make sure you read installing process - every android rom has his specific installing process - clockwork , ext3 ,ex4 etc etc.
I hope you solve your prolem

ubejd said:
Download again the rom you want to use... and make sure you read installing process - every android rom has his specific installing process - clockwork , ext3 ,ex4 etc etc.
I hope you solve your prolem
Click to expand...
Click to collapse
i did ! man...nothing works...its like i am stuck with Magldr !! can do nothing !

[Q] Stuck with HSPL 3.03.0000. No MAGLDR, no OS. What now?

Hi, I attempted to install Android on my GFs HD2. It was running Windows 6.5.
HSPL 2.08 was already installed and I installed MAGLDR 1.13. In MAGLDR I was able to select menu items but pressing the call-button didn't do anything. How do I unstuck myself? Help greatly appreciated.
UPDATE: I tried to flash the RUU_signed.nbh via SD from RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship but it failed, I guess. Now it won't boot (says Software Update failed, please try again). SPL 3.03.0000 is now installed. Slowly getting nervous over here. What's my way out of this mess now?

You should be ok to install hspl 2.08.
If you haven't already got it, get the HD2 nand toolkit (kusbedi) it makes things a lot easier. Then have a good read here.

OK, thanks, didn't know you could install HSPL from the bootloader too.
HSPL 2.08 is now installed. Still the same problem with MAGLDR not reacting to the call button, though. I guess I'll try CLK then.

You can just as easy install magldr again if you wish using the toolkit...

Hmm, I now formatted the memory with Task 29 and reinstalled MAGLDR, still no reaction to call-button presses.

I've got two hd2 s, and on both magldr never accepts the first press of send, I have to click it again slightly (only slightly,) firmer and fractionally longer. If I try the slightly longer firmer press first, it still doesn't accept it till the second press.
My point being to make sure its really a problem before you start re flashing.
If you assure yourself its really not accepting, try reflashing 2.08.hspl again but using hspl3, (there are occasional issues with Hspl4, not usually connected to magldr, but everything's worth trying) and then reflash magldr. The nand toolkit as advised is a good way to go.
Winmo roms, radios, hspl, task29... all can be flashed from bootloader, and indeed its a better way to flash.

grmpf... HSPL 2.08 from HSPL 3 was no help.
Now with cLK in Clockwork Mod, left button doesn't work either!! Points to a mechnical problem, but GF (owner) says no. Will keep trying.

polacco said:
grmpf... HSPL 2.08 from HSPL 3 was no help.
Now with cLK in Clockwork Mod, left button doesn't work either!! Points to a mechnical problem, but GF (owner) says no. Will keep trying.
Click to expand...
Click to collapse
Try installing a touch recovery? That will help you solve your problem. Also download a app like Quick Boot so you can boot straight into recovery from the Android OS.

T-Macgnolia said:
Try installing a touch recovery? That will help you solve your problem. Also download a app like Quick Boot so you can boot straight into recovery from the Android OS.
Click to expand...
Click to collapse
+`1

Thanks guys.
I successfully installed TWRP, the touch recovery built, and flashed NexusHD2-ICS-4.0.4-CM9-HWA V2.1 from there.
GF is going to be very happy!
Cheers
TWRP 2.0.0 thread
http://forum.xda-developers.com/showthread.php?t=1292146
TWRP 2.1.2 thread
http://forum.xda-developers.com/showthread.php?t=1647575