Database Users

Phone Stuck on "Stick Together" screen

So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.

CaliCL9 said:
So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.
Click to expand...
Click to collapse
Do you have a T-Mobile HD2? If the call/end keys are green and red respectively, you do...and the instructions you followed are for the other version of the HD2, the european version ("GSM 512LEO")....the T-Mobile one is the "GSM 1024LEO"
I don't know that ROM personally, but flashing a ROM for the wrong version of the phone can brick it.

CaliCL9 said:
So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.
Click to expand...
Click to collapse
The same thing happened to me when I was flashing a new rom, right after I did a Task 29. I was freaking. I just kept doing a soft reset nothing...took the battery out and put it back in and nothing. Kept doing this process for a bit, also put tried to put it in the bootloader mode (press and hold on the vol down position and pressed the red hang up phone button) anyway I just kept doing this and then I took the battery out again and restarted it and I booted back up and went pass the stick together screen. Not sure what did it but that is what I did.
J

So i flashed my sd card with fat32 then dl'ed this file [ROM]RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship. so then i renamed the file to leoimg.nbh and this is what is showing up.. when i try to reboot holding the volume down and hittin the power button
Red, green, blue, white color screen again..
With this text in the red..
PB81120 HX-B3
SPL-2.08 HSPL 8G XE
0X05
CotullaHSPL 0x40
Then in the white is says Serial
So now what?

did you just rename the file itself? you need unpack it with winrar or winzip and get the file ruu signed.nbh and rename THAT file and copy to sd card.
also, many people can't get the stock 16gb tmous card to work for flashing.try a 2gb card if possible.
course, you don't need to flash from sd card. the reason your phone hangs was answered in your duplicate thread in rom development(non 2.x version cooked rom won't work on tmous).
you can still flash from usb. enter bootloader, connect usb, wait for serial to become usb, run the file you mentioned above on your pc.

thanks! works like new

HD2 not booting after rom install

Hi all ^^
I'm new here, and I just received my HD2 and wanted to flash it with one of the cool ROMs you have on this forum.
I flashed the HSPL with HSPL2 and everything went smoothly. Then I downloaded one of CleanEX DSE Core Rom (the 6.5 Maniless FRE) to be precise.
I flashed it, all was good, at the end the phone rebooted and i was stuck at the boot screen written "HTC CleanEX UDT DsE Series". I thought maybe it was because I didn't do a hard reset yet. So i did one, everything initialyze and when it's done same thing, the phone reboot and I'm stuck at the same boot screen...
I'm starting to get a bit stressed out because if I can't connect to Activesync I can't even put an original Rom or an other twinked one ><
Does anybody know what I did wrong or why it's not working ?
Thanks in advance for your answers.
PS: My phone is a french phone.

radio - go back and reread that roms thread for recommendation, however 2.07.50.x or higher should do it.
boot to bootloader, connect usb, flash radio, phone will now boot

Connect your phone to PC and turn it on while holding volume down, bootloader menu should apear (red,green,blue,white) then you can run Rom flashing tool on your PC
but i recomend flashing newer RADIO because this may be the reason for your current issue.

That was a really quick and effective answer !!
Thanks a lot to both of you !!!! *hugs*

its seriously the radio
DN41

I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.

smrazi said:
I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.
Click to expand...
Click to collapse
are you flashing the ROM on a different micro sd card? you cant use a 8GB or 16GB. Try a smaller card like a 1GB or 2GB.
also rename the stock ROM to LEOIMG.nbh.
put that ROM file on a smaller card and go into bootloader should come right up. worked for me when i had to re-install stock to return defective unit.

HD2 Bricked?HELP?

EYy guyss
i just got my phone back from the company,
everythings was stock,
so what i did, i tried to install HSPL3_PKG and flashed succesfully SPL 2.08.0000
Then after the reboot, i got ''white htc'' screen, i waited 5min nothing happend.
SO i thought the radio, i have to update the radio...
I tried to install the Radio 2.15.50.14 It failed at 96% (??? why.. idk)
THen i thought, there is no ROM on it, i downloaded ENERGY LEO 29700 (some WM ROM) tried to install it, but it doesnt go further then 0%.
SO im stuck with my hd2 White screen,
when i Hold volume down and start it up
i get:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
The phone just came from back with a new motherboard.
my old one was damaged, i never had problems with flashing....
So any one any advice?
Cheers,

I want a NAND android on it,
for that i have to install SPL 2.08.0000
also a radio above 2.05
my radio was to low, so i tried to update it, but failed,
i dont want that stupid WM,
soo im stuck with SPL 2.08.0000
and radio 2.05
How to get it up running a NAND android, with MAGDLR?

Start over. . . . Task 29 and bring her back to life.
It is not even close to bricked
I know bricked - Bricked = No light, no display, nothing at all 100%
U r just fine. . . . LOL
If that was bricked, I bricked my phone at least a dozen times.

re
try to flash the stock rom

samson_420 said:
Start over. . . . Task 29 and bring her back to life.
It is not even close to bricked
I know bricked - Bricked = No light, no display, nothing at all 100%
U r just fine. . . . LOL
If that was bricked, I bricked my phone at least a dozen times.
Click to expand...
Click to collapse
LOL
Okee,
THen how to get my baby to breath again?

dobreandl said:
try to flash the stock rom
Click to expand...
Click to collapse
flash to the stock rom, from the htc website?
_HTC HD2_RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
is the file name.
can i flash it with SPL 2.08.0000?
i try it now.

yes the original one from site , what rom come with it from htc ?

pokerfreakje said:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Click to expand...
Click to collapse
It seems you havent proper hard spl your device
you need to install stock original rom first then do HSPL again then you can upgrade your radio or go to Android

Slow down before u really brick your phone. . . . Or get flamed on here to death
In order
1. Task 29
2. Flash to 2.15 radio
3. Flash a stock or stock like ROM
4. Do what ever you want
BUT FIRST OF ALL(LIKE STEP ZERO) make sure you have HSPL

I just Flashed it from,
SPL 2.08.HSPL
TO SPL.2.08.0000
and after ''succesfull'' didnt show ''we hacked it ''
it doesnt go on any more, the battery is full i got another htc hd2 next to me, thats working fine on it.
and now bricked?

We can go one step at a time.
Do you have HSPL?

samson_420 said:
We can go one step at a time.
Do you have HSPL?
Click to expand...
Click to collapse
It doesnt even go on
i think its bricked now,
i get like very weak buz no screen nothing...

Check your PM's

Flash it back to a hspl version the 00000 version is the stock one for warranty purposes ...

How to flash it for warranty purpose? if it doesnt connect to the pc, boatloader any more? because i do have warranty on it..

does it go to bootloader mode press and hold vol down + power together
if it does then its chance to recover it

Nope its bricked,
while i started this topic wondering if it was bricked, i bricked it officially..
and now? sell the parts or something like that?

another questions remains,
what did it brick ?
i mean the last time it was started up,
i flashed SPL-2.08.HSPL to SPL-2.08.0000 (succesfully installed)
then it didnt start up anymore.

You must install 2.08.HSPL, NOT 2.08.0000 !!!!

I talked to someone during the holidays about a bricked HD2 and this is want he told me. "JTAG will be able to fix dead HD2 when flashing a wrong firmware."
Check out his profile and send him a PM. He might be able to revive it for a small fee and shipping cost! He is also super nice!
http://forum.xda-developers.com/member.php?u=416436

[Q] HELP!!! I might have bricked this phone trying to flash a stock rom via SD

Hi all,
I would really appreciate if someone can help me reverse this process. I have an HD2 that i need to restore it back to factory ROM/condition and return it to US T-Mobile. I previously have WP7 on nand, Android on SD, Radio 2.15, with Mgldr 1.13 with HSPL 3.
I followed the procedure for flashing through SD as it will remove the HSPL. So i downloaded the ROM from TmoUS website, renamed the file to LEOIMG.nbh, and put it on a 4gb class 2 (FAT32) card. Enter bootloader mode by holding down volume/power button. Then it said loading and ask if I want to write over the image, select yes ... then it start the process. Though, half way through i receive the error message! Now when i turn the phone on i can't get past the bootloader mode. Just the error message even when I try to flash again via SD (the process doesnt even start - just said "loading" then "not allow" error message). When i get it plugged in to flash via desktop, the device is not recognized by the update utility. I'm not sure what could have gone wrong .. but any help or tips to reverse this process is greatly appreciated.
Thanks guys!!

What does it say in bootloader now?

If i just power it on I get the blank screen that said "error installing rom" with the triangle and the exclamation mark in the middle. If I boot into bootloader mode it will first get to the screen where it said "loading" then shortly it will say "error" and "not allow" then take me back to the bootloader mode. though, I noticed that the SPL is now 3.03 instead of 2.08 .. but other than that, I couldnt find a way to flash it by SD or USB. Any suggestion on this? Thanks for your help Macgnolia!

Sounds like it flashed the correct SPL and may be failing on the ROM flash, it sounds like it may be flashing the correct radio too.
What I would do is keep your phone completely off for about 3 hours, then turn it back on into bootloader, then try the flash again.
It might have some random overheat thing going on or something. Since you're back to stock SPL, go ahead and flash via RUU instead of SD and see if that does anything, it should let you since it's a stock ROM you're flashing.

Yeah I am with Orangekid here it might help to let your HD2 rest for a while so the internal temp is reduced as it my be some kind of freak heat issue right now. The HD2 hates heat incase you did not know this. I would still like to know what the top line of your bootloader says so we will know if you have the right device I.D. and that you are not one of the unlucky people to get a their device I.D. mysteriously screwed up by a stock ROM flash.

I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App

qdochemistry said:
I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
card shouldn't matter as long as it's 8gb or less from my experience. Once it's off for a few hours just try to reflash stock via RUU and see what happens.
And yeah, go ahead and load up bootloader first to see what the top line says.

I just tested it again .. same problem! at the top right corner it says "RUUNBH" then the series of lines in the red portion of the screen as follows:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I just power it on it goes to the error message .. then "loading" screen .. then "error" .. then "not allow" .. then back to bootloader mode but the third line now say MicroP-Wrong Platform (0x0)
any suggestion guys??

I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..

qdochemistry said:
I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..
Click to expand...
Click to collapse
Have you try with different micro sd card?
battery pin check, whether it is bent.
Battery capacity should at least 50%
Did you rename the RUU_signed.nbh to leoimg.nbh?
When you transfer it to sd card, did you using card reader?
Anything is possible. Please take a look of the above check list

I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.

samsamuel said:
I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.
Click to expand...
Click to collapse
Done!! THANK YOU!!!!!
For some odd reasons, my laptop (win7 ultimate) always seems to have connection issues even with chevron for wp7. I plugged it in to my wife's laptop (vista ultimate) and it connects. I was reading your comment on a similar issue in another thread and along with your suggestion here .. I figured it must be HSPL issue. I first used HSPL4 to reinstall 2.08 and immediately mgldr popped up. Then i flash the Tmo stock ROM over it. Then use HSPL4 to flash over (twice) with 3.03 (the one without the HSPL).
It took away the Energy boot screen, now I'm on 3.14 with 2.15 radio. I checked bootloader and it saids the following:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Which is a problem because I checked on the refurbished device they sent and it has SPL 2.10. And so, I put HSPL 3.03 back on there to flash via SD again. Now i run into the same problem I orginally did .. about 20% into the update process and it stops and said update error. Could this be something obvious that I'm doing wrong? and also is there a way to get spl 2.10 without SD flash??
Thanks bud
Edit: I did it again a couple times via SD and it worked! I checked bootloader and it said spl 2.10 so I guess everything is back to stock now. I guess I'm gonna throw it back in the box and send it off. Thank you everyone for the fast reply and for all the help on this issue ... you guys are awesome! Thanks

[Q] HD2 hangs at HTC screen

My HTC HD2 doesn't pass the white-green HTC screen anymore. I am able to flash it (when I flashed HSPL it said We hacked it) but still not able to go through the HTC screen. I tried flashing an original WM6 ROM, but the device still hangs at the HTC screen...
Can anyone help me? Is my phone bricked?

bartjakobs said:
My HTC HD2 doesn't pass the white-green HTC screen anymore. I am able to flash it (when I flashed HSPL it said We hacked it) but still not able to go through the HTC screen. I tried flashing an original WM6 ROM, but the device still hangs at the HTC screen...
Can anyone help me? Is my phone bricked?
Click to expand...
Click to collapse
Hi,
Your phone is not bricked.
What are you trying to install?
What radio do you have installed?
Flashing an original WM ROM should be done via sd card and it will remove HSPL.
Please give more information.

I installed RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
(that didn't work, if I only install this one I get a black screen after the HTC screen)
The tricolorscreen says:
PB81100 HX-BC
SPL-2.08 HSP: 8G XE
0X05
CotullaHSP 0X50
I will try to flash the original rom via sd card, but that is where it started.. The last time I flashed it (I had WP7 and wanted to try WM6.x) it stopped working. I flashed it via sd card and the second time I tried (when it already had stopped) it was hanging at 'Loading...'.
Any ideas?

bartjakobs said:
I installed RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
(that didn't work, if I only install this one I get a black screen after the HTC screen)
The tricolorscreen says:
PB81100 HX-BC
SPL-2.08 HSP: 8G XE
0X05
CotullaHSP 0X50
I will try to flash the original rom via sd card, but that is where it started.. The last time I flashed it (I had WP7 and wanted to try WM6.x) it stopped working. I flashed it via sd card and the second time I tried (when it already had stopped) it was hanging at 'Loading...'.
Any ideas?
Click to expand...
Click to collapse
Hi,
I take it from the ROM you tried to install that you are in the Netherlands.
Did you get the serial number from your phone and feed it into HTC support site?
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone
Change the .exe to .zip and
Extract with winrar or 7z the RUU_Leo_HTC_****************************_Ship.zip
find the larger *.nbh file and rename it to leoimg.nbh and place this file on an sd card that is 4gb or less
and reboot to bootloader (the one with 4 colors,hold volume down button until you see "SEARCHING")
follow the instructions from there.
If you had WM7 on your phone ,you should reformat your sd card to fat 32 before putting on the leoimg.nbh
Backup your data first.

I flashed the original nbh file (from HTC site with my serial number) via sd card. Now it hangs at a black screen after the HTC screen.
On the HTC screen, there now is this:
R 2.15.50.14
G 14.42.50.11U
D 3.14.04666
But after that, the screen goes black (first black lines, than black screen). The backlight stays on.
The colored screen now says this:
Pb81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
What can I do now?

bartjakobs said:
I flashed the original nbh file (from HTC site with my serial number) via sd card. Now it hangs at a black screen after the HTC screen.
On the HTC screen, there now is this:
R 2.15.50.14
G 14.42.50.11U
D 3.14.04666
But after that, the screen goes black (first black lines, than black screen). The backlight stays on.
The colored screen now says this:
Pb81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
What can I do now?
Click to expand...
Click to collapse
Hi,
I think the problem is the SPL-3.03.
Did you get a choice of original ROMS to download?
Try to get 1.43 and 1.48 roms that come with spl 1.42.0000

I tried flashing 1.48 EU English (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
It says
00028002
Not allowed
when starting. After this it goes back to tricolor screen

bartjakobs said:
I tried flashing 1.48 EU English (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
It says
00028002
Not allowed
when starting. After this it goes back to tricolor screen
Click to expand...
Click to collapse
Hi,
ROM code error usually means that official ROM is not for that HD2.
Other than that ,are you using 4GB or less sd card?
Is the phone charged to more than 50%?

I downloaded the original Dutch 1.48 rom
(RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
from the HTC website and installed it via SD card.
Now the tricolor screen is:
PB81100 HX-BC
SPL-1.42.0000
etc.
When I start the phone, I see the HTC logo
A few seconds later this appears:
R 2.05.51.05^^^2
G 15.28.50.07U
D 1.48.71294
then, about a minute later, lines and a black screen.
Is there any hope?

bartjakobs said:
I downloaded the original Dutch 1.48 rom
(RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
from the HTC website and installed it via SD card.
Now the tricolor screen is:
PB81100 HX-BC
SPL-1.42.0000
etc.
When I start the phone, I see the HTC logo
A few seconds later this appears:
R 2.05.51.05^^^2
G 15.28.50.07U
D 1.48.71294
then, about a minute later, lines and a black screen.
Is there any hope?
Click to expand...
Click to collapse
Try task29- it will erase rom in your hd2 ( it needs hspl )
or
You could try android or wp7 just to see if it works ( other than this i dont know what to say - sorry ).

I tried that (Android & WP7 won't work, because I can't get into MAGLDR. I do get it installed but I can't boot into it).
Tomorrow I'll try task 29.

Run Task 29 after flashing HSPL. This will clean out your system, then flash the 1.48 ROM by SD card method again.
Was there not a 1.66 Netherlands ROM version you could have downloaded?

thanks guys

I flashed HSPL and did task 29. After this, when I flashed the original rom, it stopped with an !.
The second time I tried installing the rom, it just installed but it doesn't start. Only lines and black screen.

during flashing procces does your phone gets hot ?
If yes thats hardware problem ( + software )... in this case to make sure try this:
Take out battery, simcard, sdcard and put it in a fridge for 5-10 min ( put phone in a bag to protect from watter), then take your phone and try to flash rom with sdcard method and post results.

The phone doesn't get hot. An update only fails the first time after a Task 29. The second update succeeds, but then it hangs at HTC or black screen.

I have same problem but not can fix it Many Thanks for all information.
Up new ROM via SD Card.