Phone Stuck on "Stick Together" screen - HD2 General

So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.

CaliCL9 said:
So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.
Click to expand...
Click to collapse
Do you have a T-Mobile HD2? If the call/end keys are green and red respectively, you do...and the instructions you followed are for the other version of the HD2, the european version ("GSM 512LEO")....the T-Mobile one is the "GSM 1024LEO"
I don't know that ROM personally, but flashing a ROM for the wrong version of the phone can brick it.

CaliCL9 said:
So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.
Click to expand...
Click to collapse
The same thing happened to me when I was flashing a new rom, right after I did a Task 29. I was freaking. I just kept doing a soft reset nothing...took the battery out and put it back in and nothing. Kept doing this process for a bit, also put tried to put it in the bootloader mode (press and hold on the vol down position and pressed the red hang up phone button) anyway I just kept doing this and then I took the battery out again and restarted it and I booted back up and went pass the stick together screen. Not sure what did it but that is what I did.
J

So i flashed my sd card with fat32 then dl'ed this file [ROM]RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship. so then i renamed the file to leoimg.nbh and this is what is showing up.. when i try to reboot holding the volume down and hittin the power button
Red, green, blue, white color screen again..
With this text in the red..
PB81120 HX-B3
SPL-2.08 HSPL 8G XE
0X05
CotullaHSPL 0x40
Then in the white is says Serial
So now what?

did you just rename the file itself? you need unpack it with winrar or winzip and get the file ruu signed.nbh and rename THAT file and copy to sd card.
also, many people can't get the stock 16gb tmous card to work for flashing.try a 2gb card if possible.
course, you don't need to flash from sd card. the reason your phone hangs was answered in your duplicate thread in rom development(non 2.x version cooked rom won't work on tmous).
you can still flash from usb. enter bootloader, connect usb, wait for serial to become usb, run the file you mentioned above on your pc.

thanks! works like new

Related

Phone Stuck on "Stick Together" screen

So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.
CaliCL9 said:
So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.
Click to expand...
Click to collapse
ROM based: D1.72.82124
Won't work on LEO 1.5 only 2.X will work.
You lucky ur phone boots!!
Flash stock rom again using sd-card (remember afterwards you have to flash HSPL back)
hehe very close call there. you have been in the wrong hd2 section. you do not have a 512 leo. had you flashed the wrong radio instead of the wrong rom, your phone would be dead now.
only use roms that specifically say tmous or t mo compatible.
xmoo said:
ROM based: D1.72.82124
Won't work on LEO 1.5 only 2.X will work.
You lucky ur phone boots!!
Flash stock rom again using sd-card (remember afterwards you have to flash HSPL back)
Click to expand...
Click to collapse
Whoa close call... so how do I flash my stock rom from the sd card and flash the hspl back? i want to just use the stock rom for now.. till i feel comfortable trying to use another rom
So i flashed my sd card with fat32 then dl'ed this file [ROM]RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship. so then i renamed the file to leoimg.nbh and this is what is showing up.. when i try to reboot holding the volume down and hittin the power button
Red, green, blue, white color screen again..
With this text in the red..
PB81120 HX-B3
SPL-2.08 HSPL 8G XE
0X05
CotullaHSPL 0x40
Then in the white is says Serial
So now what?
and heres why its a pain in the ar$€ when people post duplicate threads. just answered you in your other thread.

HD2 not booting after rom install

Hi all ^^
I'm new here, and I just received my HD2 and wanted to flash it with one of the cool ROMs you have on this forum.
I flashed the HSPL with HSPL2 and everything went smoothly. Then I downloaded one of CleanEX DSE Core Rom (the 6.5 Maniless FRE) to be precise.
I flashed it, all was good, at the end the phone rebooted and i was stuck at the boot screen written "HTC CleanEX UDT DsE Series". I thought maybe it was because I didn't do a hard reset yet. So i did one, everything initialyze and when it's done same thing, the phone reboot and I'm stuck at the same boot screen...
I'm starting to get a bit stressed out because if I can't connect to Activesync I can't even put an original Rom or an other twinked one ><
Does anybody know what I did wrong or why it's not working ?
Thanks in advance for your answers.
PS: My phone is a french phone.
radio - go back and reread that roms thread for recommendation, however 2.07.50.x or higher should do it.
boot to bootloader, connect usb, flash radio, phone will now boot
Connect your phone to PC and turn it on while holding volume down, bootloader menu should apear (red,green,blue,white) then you can run Rom flashing tool on your PC
but i recomend flashing newer RADIO because this may be the reason for your current issue.
That was a really quick and effective answer !!
Thanks a lot to both of you !!!! *hugs*
its seriously the radio
DN41
I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.
smrazi said:
I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.
Click to expand...
Click to collapse
are you flashing the ROM on a different micro sd card? you cant use a 8GB or 16GB. Try a smaller card like a 1GB or 2GB.
also rename the stock ROM to LEOIMG.nbh.
put that ROM file on a smaller card and go into bootloader should come right up. worked for me when i had to re-install stock to return defective unit.

Sending HD2 in to HTC

I called HTC to get my phone repaired since the touchscreen is unresponsive. I previously had Android installed on my sd card, and energy rom flashed. I recently downloaded the new update for the phone so that energy rom would be gone. Is there anything else I have to do before I send it in? Something to do with the original HSPL or something..
sorry i'm a complete noob at this, please help ]:
funny my t mobile hd2 touch screen stopped working last week also and i have to send it in also.
i have the first revision model with the red reset button and i have been seeing alot of problems on line with these screens. the second gen ones with the yellow reset button have better screens apparently.
you need to remove the hspl and have just the spl on it.
ryennn said:
I called HTC to get my phone repaired since the touchscreen is unresponsive. I previously had Android installed on my sd card, and energy rom flashed. I recently downloaded the new update for the phone so that energy rom would be gone. Is there anything else I have to do before I send it in? Something to do with the original HSPL or something..
sorry i'm a complete noob at this, please help ]:
Click to expand...
Click to collapse
Get a default Stock Rom that's shipped for your Serial number. Put that on the root of your SD card after naming it to leoimg.nbh.
Now run the bootloader with the SD card inserted, and follow the onscreen steps.
(re)flashing to a stock shipped rom will reset everything, i.e: remove HSPL, stock radio, stock rom, etc.
maseo said:
unny my t mobile hd2 touch screen stopped working last week also and i have to send it in also.
i have the first revision model with the red reset button and i have been seeing alot of problems on line with these screens. the second gen ones with the yellow reset button have better screens apparently.
you need to remove the hspl and have just the spl on it.
Click to expand...
Click to collapse
**** !! I have a red reset button .. m i screwed
maseo said:
Get a default Stock Rom that's shipped for your Serial number. Put that on the root of your SD card after naming it to leoimg.nbh.
Now run the bootloader with the SD card inserted, and follow the onscreen steps.
(re)flashing to a stock shipped rom will reset everything, i.e: remove HSPL, stock radio, stock rom, etc.
Click to expand...
Click to collapse
I flashed the old rom, and tried removing HSPL, but i got an error, now all i see is a triangle with an exclamation mark in the middle... when i turn the power on with the volume down button, i get "Upgrade ROM code error Please try again"
I'm planning to ship it within the next hour, do I have to fix this error before shipping? Or would it be fine..because when I turn it on with the volume down button, it says
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
that's default right?
lol i couldn't wait anymore, I mailed it, thanks for your help guys......:\

[Q] HD2 hangs at HTC screen

My HTC HD2 doesn't pass the white-green HTC screen anymore. I am able to flash it (when I flashed HSPL it said We hacked it) but still not able to go through the HTC screen. I tried flashing an original WM6 ROM, but the device still hangs at the HTC screen...
Can anyone help me? Is my phone bricked?
bartjakobs said:
My HTC HD2 doesn't pass the white-green HTC screen anymore. I am able to flash it (when I flashed HSPL it said We hacked it) but still not able to go through the HTC screen. I tried flashing an original WM6 ROM, but the device still hangs at the HTC screen...
Can anyone help me? Is my phone bricked?
Click to expand...
Click to collapse
Hi,
Your phone is not bricked.
What are you trying to install?
What radio do you have installed?
Flashing an original WM ROM should be done via sd card and it will remove HSPL.
Please give more information.
I installed RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
(that didn't work, if I only install this one I get a black screen after the HTC screen)
The tricolorscreen says:
PB81100 HX-BC
SPL-2.08 HSP: 8G XE
0X05
CotullaHSP 0X50
I will try to flash the original rom via sd card, but that is where it started.. The last time I flashed it (I had WP7 and wanted to try WM6.x) it stopped working. I flashed it via sd card and the second time I tried (when it already had stopped) it was hanging at 'Loading...'.
Any ideas?
bartjakobs said:
I installed RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
(that didn't work, if I only install this one I get a black screen after the HTC screen)
The tricolorscreen says:
PB81100 HX-BC
SPL-2.08 HSP: 8G XE
0X05
CotullaHSP 0X50
I will try to flash the original rom via sd card, but that is where it started.. The last time I flashed it (I had WP7 and wanted to try WM6.x) it stopped working. I flashed it via sd card and the second time I tried (when it already had stopped) it was hanging at 'Loading...'.
Any ideas?
Click to expand...
Click to collapse
Hi,
I take it from the ROM you tried to install that you are in the Netherlands.
Did you get the serial number from your phone and feed it into HTC support site?
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone
Change the .exe to .zip and
Extract with winrar or 7z the RUU_Leo_HTC_****************************_Ship.zip
find the larger *.nbh file and rename it to leoimg.nbh and place this file on an sd card that is 4gb or less
and reboot to bootloader (the one with 4 colors,hold volume down button until you see "SEARCHING")
follow the instructions from there.
If you had WM7 on your phone ,you should reformat your sd card to fat 32 before putting on the leoimg.nbh
Backup your data first.
I flashed the original nbh file (from HTC site with my serial number) via sd card. Now it hangs at a black screen after the HTC screen.
On the HTC screen, there now is this:
R 2.15.50.14
G 14.42.50.11U
D 3.14.04666
But after that, the screen goes black (first black lines, than black screen). The backlight stays on.
The colored screen now says this:
Pb81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
What can I do now?
bartjakobs said:
I flashed the original nbh file (from HTC site with my serial number) via sd card. Now it hangs at a black screen after the HTC screen.
On the HTC screen, there now is this:
R 2.15.50.14
G 14.42.50.11U
D 3.14.04666
But after that, the screen goes black (first black lines, than black screen). The backlight stays on.
The colored screen now says this:
Pb81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
What can I do now?
Click to expand...
Click to collapse
Hi,
I think the problem is the SPL-3.03.
Did you get a choice of original ROMS to download?
Try to get 1.43 and 1.48 roms that come with spl 1.42.0000
I tried flashing 1.48 EU English (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
It says
00028002
Not allowed
when starting. After this it goes back to tricolor screen
bartjakobs said:
I tried flashing 1.48 EU English (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
It says
00028002
Not allowed
when starting. After this it goes back to tricolor screen
Click to expand...
Click to collapse
Hi,
ROM code error usually means that official ROM is not for that HD2.
Other than that ,are you using 4GB or less sd card?
Is the phone charged to more than 50%?
I downloaded the original Dutch 1.48 rom
(RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
from the HTC website and installed it via SD card.
Now the tricolor screen is:
PB81100 HX-BC
SPL-1.42.0000
etc.
When I start the phone, I see the HTC logo
A few seconds later this appears:
R 2.05.51.05^^^2
G 15.28.50.07U
D 1.48.71294
then, about a minute later, lines and a black screen.
Is there any hope?
bartjakobs said:
I downloaded the original Dutch 1.48 rom
(RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
from the HTC website and installed it via SD card.
Now the tricolor screen is:
PB81100 HX-BC
SPL-1.42.0000
etc.
When I start the phone, I see the HTC logo
A few seconds later this appears:
R 2.05.51.05^^^2
G 15.28.50.07U
D 1.48.71294
then, about a minute later, lines and a black screen.
Is there any hope?
Click to expand...
Click to collapse
Try task29- it will erase rom in your hd2 ( it needs hspl )
or
You could try android or wp7 just to see if it works ( other than this i dont know what to say - sorry ).
I tried that (Android & WP7 won't work, because I can't get into MAGLDR. I do get it installed but I can't boot into it).
Tomorrow I'll try task 29.
Run Task 29 after flashing HSPL. This will clean out your system, then flash the 1.48 ROM by SD card method again.
Was there not a 1.66 Netherlands ROM version you could have downloaded?
thanks guys
I flashed HSPL and did task 29. After this, when I flashed the original rom, it stopped with an !.
The second time I tried installing the rom, it just installed but it doesn't start. Only lines and black screen.
during flashing procces does your phone gets hot ?
If yes thats hardware problem ( + software )... in this case to make sure try this:
Take out battery, simcard, sdcard and put it in a fridge for 5-10 min ( put phone in a bag to protect from watter), then take your phone and try to flash rom with sdcard method and post results.
The phone doesn't get hot. An update only fails the first time after a Task 29. The second update succeeds, but then it hangs at HTC or black screen.
I have same problem but not can fix it Many Thanks for all information.
Up new ROM via SD Card.

[q] help htc hd2 stuck on bootloader screen

i have spent countless hours on this and still have no idea how to fix it..ive searched many threads but none have helped..
i have a htc hd2 and had it on android NAND and just yesterday booting the windows 7 phone onto it.. after it finished the phone rebooted and was stuck on the maglrd screen where it had usb flasher and tetris and all that.. soon i then realized that the maglrd had to be on version 1.3 in order to put windows 7 on it and i had version 1.1 from when i put android on it.. so it was stuck on that screen.. so then i read from a forum that to unistall maglrd and android NAND download a stock ROM for your device then run the setup while your phone is on the tri-colored bootloader screen.. so i downloaded RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship.exe and ran it while on the boot screen after it finished my phone rebooted but then it booted straight to the bootloader screen.. then i downloaded RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe and tried the same thing but no luck.. im still stuck.. on the screen it says
PB81120 ss-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
maybe that helps.. i dont know what my radio thing is
i admit im a noob i just need HELP
You just got REAL lucky,,, PB81120 is a tmous, right? Red end key green send? Says t mobile below the earpiece?
If yes, then that second rom you flashed is the only non tmous rom that wont DESTROY the phone.
Do NOT flash any more stock roms that don't say TMOUS in the filename.
My suggestion, get tmous 3.14 rom and flash from SD card. Assuming that goes well, then flash hspl magldr etc.
Yeah it's a tmobile phone.. But how can I flash from the sd card when it doesn't even show up on my computer.. I can't select the USB drive mode on my phone for it to pull up on the comp unless there's another program I can use to explore my phone
ah right, no card reader?
well, id get the three shipped tmous roms (2.10 2.13 and 3.14, , you already have the 2.10) and try flashing them again, see if you can get any of them to boot. If you can't id suspect the stuck radio/spl problem, meaning something isn't flashing correctly (usually the radio), but the best way to see this is by sd card flashing, so if you have any access at all to an sd card reader (another phone, perhaps?) then sd card flashing will show you on screen each section as it flashes.
Don't be confused by hspl not being removed after a flash, it won't be. We'll come to that later.
Don't forget you need a 4gb or smaller sd card for flashing.
DO NOT use ANY non tmous stock roms, you will end up with a brick.
EDIT - actually, a good test for the stuck radio/spl problem is to try running hspl3 (or hspl4) and changing the spl to anything other than it currently is (2.08.hspl). If it seems to go OK, but nothing changes in the bootscreen, then that's the problem, but be aware that you could potentially end up with no HSPL installed and no way to re apply it, so if you can get your cands on an sd card reader, go for that first.
thanks i already tried the tmous rom i already had with the 16gb sd card and also an 8gb.. i guess i need to buy another one.. i have a 3.14 rom but its not a tmous one.. where do i go to dowload them?
so first i need to get a 2gb sd card and try flashing with a tmous 2.10, 2.13, or 3.14 ROM before testing the stuck radio/spl problem correct?
maybe im just doing the flashing wrong.. first i extract the file using 7-zip .. then i rename the .nbh file to leoimg.nbh then i copy it to the sd card then unplug and turn on and let it run and press the reset button on the back when its finished.. and it says on the tri-colored screen that my the spl is 2.10.0000 now and underneath it now says MicroP(LED) and MicroP(TOUCH)
You need to use a 4Gb or smaller sd card to flash a rom using the sd card bootloader flashing method. Get your hands on one of those and you'll have no problem flashing a stock TMOUS rom.
Sent from my HTC HD2 using XDA App
qweasdzxcasd said:
maybe im just doing the flashing wrong.. first i extract the file using 7-zip .. then i rename the .nbh file to leoimg.nbh then i copy it to the sd card then unplug and turn on and let it run and press the reset button on the back when its finished.. and it says on the tri-colored screen that my the spl is 2.10.0000 now and underneath it now says MicroP(LED) and MicroP(TOUCH)
Click to expand...
Click to collapse
ok well that all looks ok, and your spl has changed from 2.08.hspl to 2.10.0000 .
Did you take note of the blue writing on the phone screen when you sd card flashed? looking out for ''rsa_radio fail'' or some such)
It says radio v2 ok. rcust ok. Boot loader ok. Splash ok. os ok. Configdata ok. Ruu wallpaper1 ok. Ruu wallpaper2 ok update complete update success .... And it still didn't work with a 2gb micro sd card and a tmous 3.14 rom
and how would I even change my hspl to 3 or 4 if my phone doesn't even show up on the computer.. It wouldn't connect to active sync
what if i plug in my phone and instead of flashing with the sd card just click on RomUtilityUpdate and let it run?
yep do that. You can flash from teh bootloader screen, doesnt have to connect to activesync, so long as it says USB in teh white bit of teh bootloader screen.
it's still not working.. I've tried 2.13 and 2.14 ... I'm about to try 2.10 .. But I doubt it'll work
Nope still nothing..
looks like a warranty issue then (assuming its still under warranty?) at least the spl is now warranty safe.
So what does that mean.. do i take it into the store then an they fix it?
won't they just tell me to go since i tampered with the system?
so long as the spl says 2.xx.0000 (the 0000 is the important bit) and you cant see anything like magldr, , , are there any obvious signs? it doesnt boot does it? (im on my pohone one handed, im not checking back thru the thread )
Right now it's 2.10.0000 an it still doesn't boot
Then there's no way anyone can tell you've been flashing. Anything a tech does to make it work will wipe any evidence.(unless they forensically examined it, which they don't)
Gotta be out of warranty by now tho? And if its a paid repair it doesn't matter if you've been flashing.
Oh i see.. and yes it's out of warranty.. i guess i'll just take it to the store then
They basically said the phone is no more.. but i was just talking it employees at the place so maybe i need to talk to a tech person or something..
bootloader problm
is there any software which can put my hd2 tmus into bootloader...as i cant get into boolder by holding vol down key....wat can ido....

Categories

Resources