My HTC HD2 doesn't pass the white-green HTC screen anymore. I am able to flash it (when I flashed HSPL it said We hacked it) but still not able to go through the HTC screen. I tried flashing an original WM6 ROM, but the device still hangs at the HTC screen...
Can anyone help me? Is my phone bricked?
bartjakobs said:
My HTC HD2 doesn't pass the white-green HTC screen anymore. I am able to flash it (when I flashed HSPL it said We hacked it) but still not able to go through the HTC screen. I tried flashing an original WM6 ROM, but the device still hangs at the HTC screen...
Can anyone help me? Is my phone bricked?
Click to expand...
Click to collapse
Hi,
Your phone is not bricked.
What are you trying to install?
What radio do you have installed?
Flashing an original WM ROM should be done via sd card and it will remove HSPL.
Please give more information.
I installed RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
(that didn't work, if I only install this one I get a black screen after the HTC screen)
The tricolorscreen says:
PB81100 HX-BC
SPL-2.08 HSP: 8G XE
0X05
CotullaHSP 0X50
I will try to flash the original rom via sd card, but that is where it started.. The last time I flashed it (I had WP7 and wanted to try WM6.x) it stopped working. I flashed it via sd card and the second time I tried (when it already had stopped) it was hanging at 'Loading...'.
Any ideas?
bartjakobs said:
I installed RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
(that didn't work, if I only install this one I get a black screen after the HTC screen)
The tricolorscreen says:
PB81100 HX-BC
SPL-2.08 HSP: 8G XE
0X05
CotullaHSP 0X50
I will try to flash the original rom via sd card, but that is where it started.. The last time I flashed it (I had WP7 and wanted to try WM6.x) it stopped working. I flashed it via sd card and the second time I tried (when it already had stopped) it was hanging at 'Loading...'.
Any ideas?
Click to expand...
Click to collapse
Hi,
I take it from the ROM you tried to install that you are in the Netherlands.
Did you get the serial number from your phone and feed it into HTC support site?
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone
Change the .exe to .zip and
Extract with winrar or 7z the RUU_Leo_HTC_****************************_Ship.zip
find the larger *.nbh file and rename it to leoimg.nbh and place this file on an sd card that is 4gb or less
and reboot to bootloader (the one with 4 colors,hold volume down button until you see "SEARCHING")
follow the instructions from there.
If you had WM7 on your phone ,you should reformat your sd card to fat 32 before putting on the leoimg.nbh
Backup your data first.
I flashed the original nbh file (from HTC site with my serial number) via sd card. Now it hangs at a black screen after the HTC screen.
On the HTC screen, there now is this:
R 2.15.50.14
G 14.42.50.11U
D 3.14.04666
But after that, the screen goes black (first black lines, than black screen). The backlight stays on.
The colored screen now says this:
Pb81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
What can I do now?
bartjakobs said:
I flashed the original nbh file (from HTC site with my serial number) via sd card. Now it hangs at a black screen after the HTC screen.
On the HTC screen, there now is this:
R 2.15.50.14
G 14.42.50.11U
D 3.14.04666
But after that, the screen goes black (first black lines, than black screen). The backlight stays on.
The colored screen now says this:
Pb81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
What can I do now?
Click to expand...
Click to collapse
Hi,
I think the problem is the SPL-3.03.
Did you get a choice of original ROMS to download?
Try to get 1.43 and 1.48 roms that come with spl 1.42.0000
I tried flashing 1.48 EU English (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
It says
00028002
Not allowed
when starting. After this it goes back to tricolor screen
bartjakobs said:
I tried flashing 1.48 EU English (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
It says
00028002
Not allowed
when starting. After this it goes back to tricolor screen
Click to expand...
Click to collapse
Hi,
ROM code error usually means that official ROM is not for that HD2.
Other than that ,are you using 4GB or less sd card?
Is the phone charged to more than 50%?
I downloaded the original Dutch 1.48 rom
(RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
from the HTC website and installed it via SD card.
Now the tricolor screen is:
PB81100 HX-BC
SPL-1.42.0000
etc.
When I start the phone, I see the HTC logo
A few seconds later this appears:
R 2.05.51.05^^^2
G 15.28.50.07U
D 1.48.71294
then, about a minute later, lines and a black screen.
Is there any hope?
bartjakobs said:
I downloaded the original Dutch 1.48 rom
(RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
from the HTC website and installed it via SD card.
Now the tricolor screen is:
PB81100 HX-BC
SPL-1.42.0000
etc.
When I start the phone, I see the HTC logo
A few seconds later this appears:
R 2.05.51.05^^^2
G 15.28.50.07U
D 1.48.71294
then, about a minute later, lines and a black screen.
Is there any hope?
Click to expand...
Click to collapse
Try task29- it will erase rom in your hd2 ( it needs hspl )
or
You could try android or wp7 just to see if it works ( other than this i dont know what to say - sorry ).
I tried that (Android & WP7 won't work, because I can't get into MAGLDR. I do get it installed but I can't boot into it).
Tomorrow I'll try task 29.
Run Task 29 after flashing HSPL. This will clean out your system, then flash the 1.48 ROM by SD card method again.
Was there not a 1.66 Netherlands ROM version you could have downloaded?
thanks guys
I flashed HSPL and did task 29. After this, when I flashed the original rom, it stopped with an !.
The second time I tried installing the rom, it just installed but it doesn't start. Only lines and black screen.
during flashing procces does your phone gets hot ?
If yes thats hardware problem ( + software )... in this case to make sure try this:
Take out battery, simcard, sdcard and put it in a fridge for 5-10 min ( put phone in a bag to protect from watter), then take your phone and try to flash rom with sdcard method and post results.
The phone doesn't get hot. An update only fails the first time after a Task 29. The second update succeeds, but then it hangs at HTC or black screen.
I have same problem but not can fix it Many Thanks for all information.
Up new ROM via SD Card.
Related
So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.
CaliCL9 said:
So i just tried to flash my HTC HD2... i just bought it and tried unlocking it myself all the software went through correctly with no problems but my phone is frozen on the "stick together screen"
What i did..
I saw the thread to "Flashing your First GSM 512LEO Rom (For Noobs)" by mskip
So i flashed my HardSPL and used the HSPL3 application..
Then i used CustomRUU to install Artemis's rom and everything went well went through 100%..
and now i am stuck on this screen that says "Stick Together" screen with these codes on the bottom..
R 2.08.50.08~2
G 15.34.50.07U
D1.72.82124
Please help! This is my only phone and i have no way to get in contact with anyone.
Click to expand...
Click to collapse
ROM based: D1.72.82124
Won't work on LEO 1.5 only 2.X will work.
You lucky ur phone boots!!
Flash stock rom again using sd-card (remember afterwards you have to flash HSPL back)
hehe very close call there. you have been in the wrong hd2 section. you do not have a 512 leo. had you flashed the wrong radio instead of the wrong rom, your phone would be dead now.
only use roms that specifically say tmous or t mo compatible.
xmoo said:
ROM based: D1.72.82124
Won't work on LEO 1.5 only 2.X will work.
You lucky ur phone boots!!
Flash stock rom again using sd-card (remember afterwards you have to flash HSPL back)
Click to expand...
Click to collapse
Whoa close call... so how do I flash my stock rom from the sd card and flash the hspl back? i want to just use the stock rom for now.. till i feel comfortable trying to use another rom
So i flashed my sd card with fat32 then dl'ed this file [ROM]RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship. so then i renamed the file to leoimg.nbh and this is what is showing up.. when i try to reboot holding the volume down and hittin the power button
Red, green, blue, white color screen again..
With this text in the red..
PB81120 HX-B3
SPL-2.08 HSPL 8G XE
0X05
CotullaHSPL 0x40
Then in the white is says Serial
So now what?
and heres why its a pain in the ar$€ when people post duplicate threads. just answered you in your other thread.
Hi all ^^
I'm new here, and I just received my HD2 and wanted to flash it with one of the cool ROMs you have on this forum.
I flashed the HSPL with HSPL2 and everything went smoothly. Then I downloaded one of CleanEX DSE Core Rom (the 6.5 Maniless FRE) to be precise.
I flashed it, all was good, at the end the phone rebooted and i was stuck at the boot screen written "HTC CleanEX UDT DsE Series". I thought maybe it was because I didn't do a hard reset yet. So i did one, everything initialyze and when it's done same thing, the phone reboot and I'm stuck at the same boot screen...
I'm starting to get a bit stressed out because if I can't connect to Activesync I can't even put an original Rom or an other twinked one ><
Does anybody know what I did wrong or why it's not working ?
Thanks in advance for your answers.
PS: My phone is a french phone.
radio - go back and reread that roms thread for recommendation, however 2.07.50.x or higher should do it.
boot to bootloader, connect usb, flash radio, phone will now boot
Connect your phone to PC and turn it on while holding volume down, bootloader menu should apear (red,green,blue,white) then you can run Rom flashing tool on your PC
but i recomend flashing newer RADIO because this may be the reason for your current issue.
That was a really quick and effective answer !!
Thanks a lot to both of you !!!! *hugs*
its seriously the radio
DN41
I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.
smrazi said:
I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.
Click to expand...
Click to collapse
are you flashing the ROM on a different micro sd card? you cant use a 8GB or 16GB. Try a smaller card like a 1GB or 2GB.
also rename the stock ROM to LEOIMG.nbh.
put that ROM file on a smaller card and go into bootloader should come right up. worked for me when i had to re-install stock to return defective unit.
I have purchased HTC HD2 stuck in boot screen. Only white screen with HTC logo (no red letters with spl etc.)
Now i want to try flash it with stock rom from SD card but i do not now what rom to flash.
Is there a way to identify what is stock rom for my device.
I can enter in bootrom.
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Serial on device starts with HT03CNW....
Please help.
well it doesn't really matter what's on there already if its not booting, just flash any stock rom too check it actually works them change if you need to.
if its a tmous then make sure you flash a compatible stock rom.
if its a branded device then you may find some roms wont flash and you ned to "goldcard" it.
Flash OK, HD2 still stuck in boot screen
Hello,
I have flashed HD2 with RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.
After starting flash radio was flashed, then flash restarted hd2 and then started from begining and everithing flashed OK. i restarted hd2 but status remained the same.
It booted in white screen with HTC logo but there were no red leters in lower part of screen.
Also hd2 after HTC logo vibrated six times. I left phone in that state for 20 minutes, but nothing hapened.
What to do??
In bootloader now:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Any suggestions??
not sure, sorry.
im not that clued up on flashing issues, someone will have an answer for you though...
It sounds as though it may be a operator locked phone and it won't upgrade to a HTC stock ROM.
Where and how did you download the 3.14 ROM?
Any info you can tell us about the phone, ie USA or International, locked to an operator or SIM free?
I downloaded 3.14 from htc.nl site. I wrote serial and it permited me to download fw.
I purchased phone on eBay from guy in Netherlands. He stated that phone is not locked. The rest i do not know.
Yesterday i downgraded spl to 1.42 with sspl and then instaled HSPL 2.
I upgraded to WWE 1.48 but status remain the same.
Also i tryed with mtty and task 28 and task 29 but that also did not change status.
Thanks,
D
I need help. I wanted to install android on htc hd2, i previously had WM 6.5. I formated sd card and put Android rom folder on it...run clrcad.exe and haret.exe. It came to black screen with some text, last line was something about jumping to kernel. It was there like 15 min, i pulled the battery...now it wont start...what to do?
When i plug in the usb it boots up to htc screen and then again shuts and boots to htc screen and keeps going like that.
Bent battery pin.
i now have another problem, i installed magldr 1.13 and now its stuck on htc logo screen...only can pull out battery and go to bootloader...i had radio 2.xx.50.xx...all the text on bootloader is:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
what to do??
Go to tricolor screen. Install stock winmo ROM and make sure the phone boots up fine, etc. Then you can start messing with it again. Note - if you install a stock rom, your hard spl will be replaced.
Did you check the bent battery pin idea? And also, may want to try the thing stated above, but use a custom ROM.
Oh, and may seem obvious but you are holding the power button down when trying to boot MAGLDR right?
Help I am stuck in bootloader. i flashed a tmo us rom on my tmobile hd2 and now i am stuck in the bootloader. the spl changed when i flashed and does after i put hardspl again. Can somebody help me and i have triied installing through sd card and usb.
Are you sure your HD2 is a tmous or eu. If it's call and end buttons are red, it's a TMOUS.
How did you flash the rom. By SD card or by PC via RUU?
Yes it is us because I bought it from T-Mobile and I tried flashing both ways
But, you didn't explain how did you get stuck in boot loader. Didn't you pull the battery?
i pulle dthe battery and put it back in and it still boots into boot loader
i got stuck in boot loader by downgrading from android to wm 6.5
You are telling that your device boots into bootloader pressing the power button and does not perform a normal boot. If so, please state the name of the ROM you flashed and the output of the tri-colour screen.
i flashed the 3.14 one from the official too website
i meant tmobile website
What does the tri-colour screen say?
it says
PB81120 SS-b3
SPl-2.08.HSPL 8G XE
0x05
Cotulla HSPL 0x40
Does the blue colured row say "rom update code" failed. The output you wrote and nothing is wrong with the bootloader and it is normal. I just can't find the cause of it.
Do not waste your time searching for a solution
I've been through the same problem since more than a year and lost a lot of time to solve this problem and I did not find a solution through the Internet
Everything seems sound, but you always boot to bootloader.
it asks for qualcom cmda drivers
you should probably do a factory reset on the phone
saniyal said:
it asks for qualcom cmda drivers
Click to expand...
Click to collapse
No more ideas man.
http://forum.xda-developers.com/showthread.php?t=408105
Try to find something in this topic!
Are you still lost OP?
Sent from my LG-P999 using xda premium
i have the same problem. Just bought today a HTC HD 2 here in Portugal, it is factory unlocked, it brought Android ICS in it, i downloaded PTG latest ROM and rename to leoimg.nbh. it stopped updating, and now i can't do HSPL4 'cause i am on SPL 3.03.0000
and it appears the following on tri-color screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
please give me a solution for this problem, please
To fix it, search xda for mtty.exe, than perform task 29 and than task 2a and than task 8, than reboot to 3 color screen again and install oficial ruu wince rom