Related
OK, I received a T-Mobile hd2 that was and still is stuck on "stick together " screen. I tried the reset button on the back, taking out the battery, checked for bents battery pins, and I downloaded 2 "official" .exe roms and renamed to zip and extracted.the nbh file and renamed to leoimg.nbh and tried to flash them.via a formatted fat32 2gb SD card and only one worked, kind of but gets stuck at like 15% of the way?? For like 10 min..I just pulled the battery. .I tried it twice..Please help me out here..this is what is says on the bootloader screen if that helps??
PB81120. SS-B3
SPL-2.10.0000 8G XE
MICROP(LED) 0X05
MICROP(TOUCH) 0X50
AND NOW IT SAYS THIS (ON THE GREEN PART OF THE BOOTLOADER SCREEN), AND THIS IS AFTER THE FAILED FLASH THAT I TRIED..
"UPGRADE ROM CODE ERROR PLEASE TRY AGAIN" ?
Is that just saying that the flash failed?? Or something else??
Please help me out guys...as you can see I'm kinda desperate and exuasted in trying to get this.hd2 working again!! Preferably ANDROID FROYO..THANKS IN ADVANCE!!!
You need to make sure you are flashing the correct stock ROM. Try downloading and flashing the official T-Mobile US 2.13 ROM, that SHOULD get you back to working. Everything you are doing is correct, Fat32 formatted SD card, under 4GB....nice job searching before posting, that is to be commended. Anyways, try the 2.13 ROM and let me know what happens.
Have you tried a hard reset? Or task 29 while in bootloader mode?
Sent from my T-Mobile G2 using XDA App
Ok i tried the 2.13 rom and it flashed and said success! but then it just stayed at that screen?? so i pressed the reset button on the back and now its back to the stuck "stick together" screen!! ??? should i have waited till it rebooted after it said "succes "?? i waited like 5 min and nothing and i just pressed the reset button..or should i have taken out the battery??
Yeahhh...you may have jumped the gun a little bit...after is says success, it takes like 10 more minutes for the ROM to set everything up. Go into bootloader and try flashing it again with the stock ROM and wait for at least 10 minutes and see what happens.
OK ill try that if I get lucky enough for that successful update..LOL
But I flashed a hspl2 (2.08) and can't I just flash away?? (USB..bootloader mode) ?? Since the phone is always stuck on the bootloader screen..
I just open the exe flash program and connect my hd2 in bootloader mode and I get the USB mode on the bootloader screen and I flash away..but it but it always stops at a certain point...mostly 8%..???
Yeah you can just flash away like usual. HardSPL isn't required to flash an official ROM anyways.
what am i doing wrong!!?? i tried ,many roms but hang at 8% 95% of the time?? i tried kumars tmous v2.9 s23139 se rom, the ruu_leo_1_5_tmous_2.10.531.0_radio_15.34.50.07u, and T-Mobile_HD2_MR_Software_2.13.531.1, all stop at 8%???!! ...i always do task29 after every failed rom to be clean and start over..thats right..right??
i have the hspl 2.08
i have a feeling im flashing an incompatible rom that requires a different radio rom??
please give me a link to download the right rom...thanks
1st post, rom 2.13
http://forum.xda-developers.com/showthread.php?t=655653
i feel for ya man, i keep getting up and running , every thing runs fine, i get it to survive a few reboots, then dead.... stuck at the boot screen.
i cant wait for a solution to android running natively...
I tried but hangs at 8%????
i tried many other roms, kumar, core cell, official tmobile us roms, they all either stop at 0%, 1%, 8%????? im going crazy here!!! whats going on?? i have hspl 2.08 and i do a task29 before every flash, but the wierd thing is that it doesnt auto reboot after task29?? it should, right?? and even after a hspl3 flash it doesnt reboot, the phone use to reboot automatically after one of those??? no i have to take out the battery for 15 seconds and put it back for it to boot again into bootloader?? and wierd thing is that sometimes if a flash fails and when i get it the hd2 to turn back on and if i do the hard ereset (volume up and down and then press up to reformat) it then reboots and hangs at the boot image of the last failed flash?? i thought when i do a task29 everthing should be erased???
guys im about to LOOSE IT!! i have tried to flash this phone already like 100 times int he past 3 days, no joke!!! 2 times it reached 100% but even after it rebooted and i did a hard reset it would hang at the boot logo?????
please guys help me out!!! and im the type of guys thats not gonna stop unless it breaks or someone takes the phone away from me...lol
naiefelyemeni said:
i tried many other roms, kumar, core cell, official tmobile us roms, they all either stop at 0%, 1%, 8%????? im going crazy here!!! whats going on?? i have hspl 2.08 and i do a task29 before every flash, but the wierd thing is that it doesnt auto reboot after task29?? it should, right?? and even after a hspl3 flash it doesnt reboot, the phone use to reboot automatically after one of those??? no i have to take out the battery for 15 seconds and put it back for it to boot again into bootloader?? and wierd thing is that sometimes if a flash fails and when i get it the hd2 to turn back on and if i do the hard ereset (volume up and down and then press up to reformat) it then reboots and hangs at the boot image of the last failed flash?? i thought when i do a task29 everthing should be erased???
guys im about to LOOSE IT!! i have tried to flash this phone already like 100 times int he past 3 days, no joke!!! 2 times it reached 100% but even after it rebooted and i did a hard reset it would hang at the boot logo?????
please guys help me out!!! and im the type of guys thats not gonna stop unless it breaks or someone takes the phone away from me...lol
Click to expand...
Click to collapse
Did you have Android loaded on that same microSD card? Does it hang if your microSD card is out.
After you task 29 it should auto reboot, then you press Volume Down and Power to get into bootloader. Have you tried flashing from your PC via USB? If you are flashing form the card a stock rom, it will overwrite your HSPL to Stock SPL. You probably know this. Also if you flashed 2.13 then you need to install HSPL3 and not the original HSPL program. 2.13 has 2.10 firmware. HSPL only supports 2.8 firmware.
I've always heard when it hangs on boot up that it's usually something on your card.
it never had android, i got it with the stock firmware and it was messed up, stuck on "stick together" screen..and i never have the sd while im flashing via usb in bootloader.. i tried many roms, and task29 followed by hpsl3 and then i would flash custom roms and even stock roms but all fail?? all stop at like 8%, but the wierd thing is that even the task29 sometimes fails at 0% so im suspecting maybe its from windows 7? but i did try xp and the samething, the roms would stop usually at 8% or 0%??? ...weird?
ok i kinda fell like my mind is cluttered and confused..
i want to know, please..what rom is compatible with my current tomobile hd2 with hspl 2.08 colutta
so what rom should work fine?? with no problem?? and DOES IT MATTER WHAT MY RADIO ROM IS?? i have a feeling that if i have a older radio that it will interfere with the rom???
Ok i got it to accept a rom flash from sd card!! But it just stayed at the "update complete, update success" white screen??? I waited over 10min the i did a reset and hard reset...and now stuck at the boot logo??? I heard i might need a higher radio??? 2.10 or higher?? Is this why its not booting up?? Can i flash the radio through sd card??
naiefelyemeni said:
Ok i got it to accept a rom flash from sd card!! But it just stayed at the "update complete, update success" white screen??? I waited over 10min the i did a reset and hard reset...and now stuck at the boot logo??? I heard i might need a higher radio??? 2.10 or higher?? Is this why its not booting up?? Can i flash the radio through sd card??
Click to expand...
Click to collapse
You can flash a radio, just like a rom form the microSD card...
is there such a thing as a wrong radio version for a rom or "required" radio version for a rom?? will that cause the phone not to boot up???
naiefelyemeni said:
is there such a thing as a wrong radio version for a rom or "required" radio version for a rom?? will that cause the phone not to boot up???
Click to expand...
Click to collapse
I've never had issues using any Radio with any ROM really. Some combos work better than others but won't cause your problem. If I were you I would task29, then flash the 2.13 or the new 3.14 shipped ROM via microSD to take the SPL back to stock. Then I would flash HSPL3, then reflash a Custom ROM or the Stock ROM via USB. Then do a couple hard resets after that. If that doesn't work I'm thinking Hardware.
You can use any of these radios. http://www.4shared.com/dir/RFg27UmU/Radios.html Doesn't matter what ROM you are running.
Wtf!! I tried to restore the stock tmous roms (2.13 and the latest 3.14) and all would stop at 8%???? And i reverted back to stock 2.08 spl..still hangs at 8%??? But if i flash that core cell rom...itll say success 100%..??/ why???? Man this freakin hd2 is makin me go crazy...hardware issue maybe??
come on guys?? please help, its been like 10 days no reply...
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate
Moved to HD2 Android Q&A and General
I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?
Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.
And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?
Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.
Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
There are the Android versions that run off sd card which run as a dual boot with winmo.
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..
Believe me that i've tested that way, and another ones, so as to get it work, but no luck.
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.
chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?
I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks
cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this
Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?
enadiz said:
Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?
Click to expand...
Click to collapse
Try re-flashing HSPL.
I'm having the exact same problem.
I have opened a thread with this question few hours ago
Is there someone who can help us?
@digital outcast
re-flashing hardspl did not make the slightest change... :S
I assume both of you have tried flashing back to a WinMo ROM right? Does that flash to it ok and provide the same end result (white screen)?
in my case, it doesn't even flash because when CustomRUU starts, and the process begins (everything normal), the indicator freezes at 0% until it gives a communication error and all process is aborted!
the indicator freezes at 0%
Click to expand...
Click to collapse
When you flashing WinMo? If not(if you flashing android), I think problem is with wrong radio
And you tried a task 29 beforehand? Do you have any antivirus / firewall software running that you can disable temporarily?
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
tpmonteiro said:
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
Click to expand...
Click to collapse
Ditto, I have not tried the 1.66 Wmo rom though, will try that and MAGDLR 1.13 when I get back home later.
Anyone else who encountered this problem before? Thanks !
Can you go back to WINMO using LEOIMG.NBH and VOL.DOWN?
Can you boot into WINMO6.5 without problems?
Neither!
The update through HSPL is sucessfully completed, but when phone restarts, white screen appears immediately after...
I've also tried to flash other radios (the latest was installed) but the update fails everytime (through hspl).
I had MAGLDR 1.12 installed and it ran before booting the OS (android), but the white screens appears before that.
Damn!!!
Any ideas?
It actually looks like this when I try to flash a stock rom + radio over the SD card.. http://forum.xda-developers.com/showthread.php?t=618084
UPDATE FAIL
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
more data needed.
it looks like you're saying it loads HSPL 2.08 then loads magldr then when it tries to load the ROM it gives the fatal thing right?
so what happens after you flash a winmo ROM? does it hang? where? what exactly happens when you turn on your phone? have you tried flashing stock WM6.5?
Yup the fatal error appear on magldr v.1.13
Ive tried task29..
Then when i tried install windows stock 6.5 it stuck on the white htc screen without any red letters on the bottom like usual..
It looks is a risk to do flashes, I have HTC HD2 and I'd lile to installa Android on Nand, but I'm scared by the possibles problems
flawlessx92 said:
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
Click to expand...
Click to collapse
I had the same problem. I tried every imaginable solution and nothing would work. I flashed WinMo from the bootloader screen, and SD card and it would sometimes load, but would freeze or hang up most of the time during boot. I tried flashing a DFT ROM, and it would boot about 20% of the time, and hang the rest. When it would boot, it would freeze once it got warm.
Luckily my phone was still under warranty.
fra1977 said:
It looks is a risk to do flashes, I have HTC HD2 and I'd lile to installa Android on Nand, but I'm scared by the possibles problems
Click to expand...
Click to collapse
The statistics are in your favor. If you were to compare all of the times that our HD2's have been flashed versus the amount that have been bricked, it would probably be less than 1% that have been bricked. IMO, Android is so much better than WinMo that it's well worth the risk.
....................
I have the same problem. After trying everything, now it sometimes boots into windows but after a while it suddenly stops working and reboots and sucks on white htc screen....
Tomorrow it will go back for warranty...
does anyone knows how this fatal hit error happens? I used the phone without problems for over 2 weeks with android on nand, before the problems started.
Sent from my HTC HD2 using Tapatalk
I think that this is the problem that made us wait too long for MAGLDR.. cotulla thought that he fixed it but looks like he didin't... i think the bootloader has overwroten the SPL..
Can you guys give more details about your HD2s like "When have you bought it" "which screen you have" ?
flawlessx92 said:
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
Click to expand...
Click to collapse
It seems to me like many bad blocks on NAND...
How to verify that:
1) flash cLK (chose a partitioning your prefer)
2) via cmd run the following commands
Code:
fastboot erase boot
fastboot erase recovery
fastboot erase system
fastboot erase cache
fastboot erase userdata
If you have bad blocks it will show up in console of cLK
It will look like this
[6521] can't erase block @ 3424
[6521] bad block @ 3424 (or something like that)
You need to have adb drivers installed and fastboot.exe for the commands. If you don't have download them from here
Put the in a folder i.e. c:\android
navigate with cmd there and run the commands.
CWM can recognize bad blocks and skip them, therefore if you have many in each partition you can create larger partitions for /boot and /system and your phone will work properly until you decide to send it for repair.
If i remember well each block is 128KB
MAGLDR v1.13 on my HTC HD2
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these(
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15
Same problem here, it seems the problem is with HD2 1024mem.. Tmous?? will CLK installation will solve? anyone with more suggestion? I would really really appreciate..my hd2 is laying on table for 2 weeks now with no solution
Ive noticed the fatal hit error on the hd2s with those tiny dots in the screen.
sent from my Nexus S
teutakarakashi said:
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these(
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15
Click to expand...
Click to collapse
Your problem is wrong hspl.Magldr works only with hspl 2.08
sent from my hd2 using ics
WorldWide60 said:
The statistics are in your favor. If you were to compare all of the times that our HD2's have been flashed versus the amount that have been bricked, it would probably be less than 1% that have been bricked. IMO, Android is so much better than WinMo that it's well worth the risk.
Click to expand...
Click to collapse
agree with that
Did a hd2 the other day. Fatal hit error popped up. Done hundreds of hd2s. Bricked 2. On the particular hd2 i booted into magldr and did a reset. Had to reboot bout 20x to finally work. When it finally booted the touch was unresponsive. After another 10 or so reboots it finally stuck. Easy phone to mod but highest brick rating for me. I flash phones for a living so i know what im doing. Ive bricked my own g1 learning back in 09 and bricked 2 hd2s in 2011. There must be certain hd2s that dont accept the flash. Ive noticed the hd2s with the dots in the screen have been the only ones that give a hard time. Are theres the euro version? I only flash android on them not keep up with its development.
sent from my Sensation
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry
gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry
Click to expand...
Click to collapse
Here's the radio you want dude:
http://www.multiupload.com/QP0IWGY42F
reply back if having problems or pm me.
matt
Hmmm, few questions........
What kind of HD2 do you have.. US, European??
What radio do you currently have?
What radio are you trying to flash?
Can you get to bootloader (3 coloured screen) by turning on while holding vol. down?
gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
Click to expand...
Click to collapse
Can you enter Bootloader Mode and verify that your HardSPL install completed successfully and that you now have SPL-2.08.HSPL on the second line.
If that is ok then try flashing the Radio using the SD Card method as stated in my flashing guide (renaming the nbh file to LEOIMG.nbh copy to the root of your storage card and reboot into bootloader mode).
Mark.
Im confused now - I did the update again after flashing a stock rom via the sd card method. The radio updated and the rom started the self set up sequence.
I removed the battery - re ran hspl loaded fine,
confirmed its installed rebooted fine to rom rom.
powered off back into boot loader ran custom ruu - the progress bar ran to 100%. Phone rebooted and again is stuck at the green htc logo on the white backgroud with no radio details in the bottom left hand corner?
I re downloaded the file for the radio so ts wasnt corrupted.
Ill try the leoimg.nbh method see if that works.
WELL Thanks to the replies and starting AGAIN from scratch and updating the radio the sd card way Ive gotten it all working.
thanks for all the info.
Sometimes a little patience and a fresh pair of eyes so to speak - works wonders
Gurry
What radio? Cos the symptoms sound like what happens when you load a 51 radio with a 576 enabled rom.... ie it hangs at RGD info screen without any RGD info showing.