Database Users

stuck after installing MAGLDR while installing NAND

oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?

Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.

Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate

Moved to HD2 Android Q&A and General

I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!

sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?

Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.

And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?

Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.

Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.

I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.

There are the Android versions that run off sd card which run as a dual boot with winmo.

sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!

sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..

Believe me that i've tested that way, and another ones, so as to get it work, but no luck.

I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .

mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.

chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?

I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks

cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this

hd2 stuck magldr 1.13 help!

Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks

If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously

I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?

i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).

i have a problem like that

If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....

But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?

any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed

Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes

osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks

That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App

This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard

Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated

Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.

hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation

DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).

i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do

tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??

Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)

FatalHit Error HELP T~T

I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
When I tried task29,update radio and installing stock winmo6.5 it will just stuck at the first htc logo without any red letters at the bottom
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..

Try this thread!
http://forum.xda-developers.com/showthread.php?t=908915&page=2
Hopefully this will help you to revive your fone again! It worked for others with your problem....so:
Good Luck!

[Q] Problems to flash clK or magldr to HD2

Hello everybody,
I started a thread in the German handy-faq.de forum about flashing my htc hd2 (512LEO) with android.
While they can’t help me, a forum Member told me to ask the xda-Dev.
So here am i and i hope you can help me.
At first, please pardon my mistakes in the English language, it’s a long time ago since I learned it at school
Now my Problem:
My HTC HD2 was repaired by manufacture one year ago. The Smartphone got a new Motherboard with the actual Software (HTC ROM 3.14.407.2(04666) GER, Radio 2.15.50.14…)
The original ROM WM6.5 was/is running without faults.
After reading in many forums about changing the Software I tried to put Android on my HD2.
At first I “opened” the HD2 with HSPL4 and changed the SPL3.03 to HSPL2.08.
After this was successfully done also Task 29 “worked”… I tried to flash clK1.5…the PC said: “done” but after reboot the HD2 stopped with a white screen and green htc letters.
There was no hboot! From booting with pressed “Back” or “Home” Button the same: no menu.
I tried it again several times also with clK 1.4 and magldr (after Task29) the same problem.
Back to WM6.5 via SD Card was no Problem so the HD2 works fine at this time.
What can I do to get Android on my Handy?
Is it possible, that some HD2 didn’t work with clK or magldr?
Is something wrong in "my way" of flashing?
Many thanks
123kb

some older versions of task29 use a radio as the .nbh, so its possible you removed the required radio.
i would.....
forget about task29, its not necessary.
enter bootloader
confirm spl says 2.08.hspl and NOT 2.08.0000
flash 2.15.50 radio
back into bootloader
flash magldr (because it should come up automatically when the phone restarts, without requiring you to press anything, making it easier to tell its worked)
report back.

Thanks for your answer.
I did this yesterday, after installing magldr and auto boot the HD2 shows no Menu, only white screen and htc.
The HD2 shows 2.08 HSPL after booting with L- Button pressed so it shut be "open".
That´s the problem, i can´t get into the Loader Menu.
All the same clK or magldr.

123kb said:
after installing magldr and auto boot the HD2 shows no Menu, only white screen and htc
Click to expand...
Click to collapse
only three reasons that magldr wouldnt show up...
1 - wrong radio - must be 2.xx.50 where xx is 07 or higher (2.15.50 keeps it simple)
2 - wrong hspl - must be 2.08.hspl
3 - faulty hardware.

...are you sure that there are only these 3 reasons?
Radio is 2.15.50.14,HSPL is right 2.08.HSPL and i can´t believe that the Hardware is faulty because Windows Mobile "Backflash" and the Phone is running without any fault.
I will download the Soft again (maybe i loaded "broken" Soft) and try to flash again (without task29 as you wrote)
I´ll be back in some minutes...

...soft download from xda...HSPL 2.08 installed,Radio from orig.ROM 2.15.50.14, with HD2 Toolkit 4.2.0.1 magldr installed...the same as I wrote...no Menu
any idea

Try a different version of MAGLDR/cLK. Your motherboard was replaced, and I have seen so many people with replaced motherboards having problems. It could be like what sam said, a hardware fault. (Technically for HTC, it isn't a hardware fault as long as it doesn't affect the phone's functionality under Windows Mobile)

there have been cases where winmo flashes and works fine, yet other things don't, perhaps magldr starts, but then always hangs at gogogo, or gives 1e fatal hit, , and the dreaded stuck radio has many variants, ranging from being fixable by flashing using the freezer trick, all the way through to nothing at all working ever, , so i could well believe there is a case where winmo would work but nothing else would.
why not try clk again? i believe there is a version of clk that can be flashed from sd card, , might take better than the usb version?

...I tried different Versions of magldr, clK 1.4 and clK1.5 allways the same Problem.
I can´t find clK Version to flash from SD. If you got it, send me a link and I try it.
it seems, that my HD2 only run WM6.5 and before "Murphy" comes and I flash my Phone in a "Paperweight" I stay on using WM6.5.
Thanks for the help.
Have a good time

123kb said:
I can´t find clK Version to flash from SD. If you got it, send me a link and I try it.
Click to expand...
Click to collapse
http://www.mediafire.com/?624yf6cs03buk6f
Copy the .nbh file to a clean SD Card (make sure the SD Card is not too big - a less than 2GB card is sure shot), power up the phone with the vol down key pressed. All the best!

hello ph03n!x,
thanks for the link, I downloaded the file and put the leoimg.nbh to the same 2GB SD Card I used to flash back to WM6.5.
The Phone "said" succesfull done but after reboot, white screen and htc letters.
It will not run on my Phone...ok, back to WM65 again.
Thanks a lot,it was worth a try....I will try it again if there is any way...maybe in the future it is possible )

Hi,
if WinMob6.5 is runing, you can boot Android over WinMob... you only need a right partition on SD-card (see NativSD-thread see: http://forum.xda-developers.com/showthread.php?p=31110691 ) , then install Android in the partition (rom-name must have NativeSD in thread-title like the pacman-rom http://forum.xda-developers.com/showthread.php?p=32721010 ), boot WinMob and start Android via clrcad + haret (or with my "one-click-tool" see: http://forum.xda-developers.com/showthread.php?p=33174747 ) ...
See the Wiki under WinMobile Installation
http://forum.xda-developers.com/wiki/HTC_HD2/NativeSD
(great thanks to Szczepanik for the Wiki)... it looks complicated, but it's realy simple...
My pacman-rom runs great... (thanks XYLO)
Cheers
Klaus
Sent from my HTC HD2 using xda app-developers app

hello o82239,
I try to use your tip, unfortunately without any success,
after starting haret.exe and booting the HD2 shows 6 or 7 lines in very small letters and hang on this screen.

123kb said:
hello o82239,
I try to use your tip, unfortunately without any success,
after starting haret.exe and booting the HD2 shows 6 or 7 lines in very small letters and hang on this screen.
Click to expand...
Click to collapse
Hi,
I think, you should try it all again with a clean SD-card (you can clean all SD-card-partitions under Win7 with "diskpart" or under Linux with fdisk or other tools)... and post all your steps... we can take a look, if you have forgot one step or if you do something wrong...
Cheers
Klaus
Sent from my HTC HD2 using xda app-developers app

just follow the clk install you didn't add driver for your dev.So I think you just follow the step .1.task29 2.flash radio 3.flash clk 4.add driver then reboot with holding on your home button into recovery screen.And can you show us what your screen looks when you in HSPL sreen.
Sent from my HTC HD2 using xda app-developers app

hello and thanks for your answers.
at first for o82239, I tried three different sd cards all are running perfect with WM6.5 (sandisk 32gb class 10, sandisk 8gb class 2,Medion 16gb class 4) formatet with "sdformater", and one partition FAT32 and the second EXT4 with mini tool partition wizard.
for wxl104 the problem is that i can´t get after point 3...clK is successfull installed,shows the pc but the HD2 shows after reboot white screen with green htc logo.
so the main question is:
why did the hd2 hang after rebooting on both "softwaresystems" (sd or nand installation)
i´m shure that i did both installs (many times) the way the "howto" is written or the install guide shows.

123kb said:
hello and thanks for your answers.
at first for o82239, I tried three different sd cards all are running perfect with WM6.5 (sandisk 32gb class 10, sandisk 8gb class 2,Medion 16gb class 4) formatet with "sdformater", and one partition FAT32 and the second EXT4 with mini tool partition wizard.
for wxl104 the problem is that i can´t get after point 3...clK is successfull installed,shows the pc but the HD2 shows after reboot white screen with green htc logo.
so the main question is:
why did the hd2 hang after rebooting on both "softwaresystems" (sd or nand installation)
i´m shure that i did both installs (many times) the way the "howto" is written or the install guide shows.
Click to expand...
Click to collapse
I can't be sure if you have done anything wrong.but just follow the right step,you can't go to CLK or MAGLDR menue.It mean you have done something wrong.you can install w6.5,so the phone driver is ok.But if you use the htc official rom.you can try to re-unclock your phone.And use hspl-2.08 .If also can't you drop your flashing tool,and redown it again.And then follow the right step,which you can serch it though this forum.

wxl104 said:
I can't be sure if you have done anything wrong.but just follow the right step,you can't go to CLK or MAGLDR menue.It mean you have done something wrong.you can install w6.5,so the phone driver is ok.But if you use the htc official rom.you can try to re-unclock your phone.And use hspl-2.08 .If also can't you drop your flashing tool,and redown it again.And then follow the right step,which you can serch it though this forum.
Click to expand...
Click to collapse
1 flash hspl , 2 flash magdlr ,3 boot holding down power button , 4, select usb flash ,5 flash clockwork ,6 flash rom ! that's how i always do it no need to task29

[Q] HD2 not booting/dead?

Hello fellow HD2-Users.
Until about two days ago my HD2 (Vodafone-EU) was happily running tytungs NexusHD2 Android ROM from a NativeSD-Installation (HSPL 2.08 and MAGLDR), but suddenly it did not boot anymore. The white HTC Screen appears, MAGLDR starts, finds the Image and starts doing it's magic, the black HTC Screen appears and bam, frozen. I am still able to enter the MAGLDR Menu and Recovery (recovery-4EXT and CWM, doesn't matter) and can install ROM's via the SD-Card into NAND and NativeSD, but it just won't boot, no matter what i do.
After that i tried a complete wipe by installing the official stock Vodafone 3.14 WM ROM: Doesn't work. The status bar appears on the phone but is stuck at 0% and after a few minutes RUU crashes. Same with HSPL v2 and v4.
Does anyone have any idea what is wrong with my phone? Is the RAM, CPU or NAND broken in some way? If not, does anyone know how to recover it?

Azurewrath said:
Hello fellow HD2-Users.
Until about two days ago my HD2 (Vodafone-EU) was happily running tytungs NexusHD2 Android ROM from a NativeSD-Installation (HSPL 2.08 and MAGLDR), but suddenly it did not boot anymore. The white HTC Screen appears, MAGLDR starts, finds the Image and starts doing it's magic, the black HTC Screen appears and bam, frozen. I am still able to enter the MAGLDR Menu and Recovery (recovery-4EXT and CWM, doesn't matter) and can install ROM's via the SD-Card into NAND and NativeSD, but it just won't boot, no matter what i do.
After that i tried a complete wipe by installing the official stock Vodafone 3.14 WM ROM: Doesn't work. The status bar appears on the phone but is stuck at 0% and after a few minutes RUU crashes. Same with HSPL v2 and v4.
Does anyone have any idea what is wrong with my phone? Is the RAM, CPU or NAND broken in some way? If not, does anyone know how to recover it?
Click to expand...
Click to collapse
Sounds like your sdcard is gone kaput!
Can you see it with computer? If so make a backup and reformat from recovery.

shanman-2 said:
Sounds like your sdcard is gone kaput!
Can you see it with computer? If so make a backup and reformat from recovery.
Click to expand...
Click to collapse
Nope, the SDCARD is fine, as this behavior also happens when booting from NAND.
Also i just tried a way of flashing a rom i had already forgotten: i put the stock image as leoimg.nbh on the SC-Card and tried flashing that: First try failed, second try worked. I now have a working WM Vodafone ROM with SPL 3.03.
After that i tried reinstalling HSPL 2.08 by using HSPL4, but it failed with an error:
CRITICAL ERROR
Flow: 00000006
Error Code: 0000000D
Description: Unknown
Any further ideas?

Azurewrath said:
Nope, the SDCARD is fine, as this behavior also happens when booting from NAND.
Also i just tried a way of flashing a rom i had already forgotten: i put the stock image as leoimg.nbh on the SC-Card and tried flashing that: First try failed, second try worked. I now have a working WM Vodafone ROM with SPL 3.03.
After that i tried reinstalling HSPL 2.08 by using HSPL4, but it failed with an error:
CRITICAL ERROR
Flow: 00000006
Error Code: 0000000D
Description: Unknown
Any further ideas?
Click to expand...
Click to collapse
Don't know what error that is but you could try clk 1.5, and install from the sdcard.
Have a look here at post 3.
Still not sure about your sdcard though, I would back it up and reformat the ext partition!
Oh sh**, you have to install HSPL first!
Does the installer start or do you get thiserror before?

shanman-2 said:
Don't know what error that is but you could try clk 1.5, and install from the sdcard.
Have a look here at post 3.
Still not sure about your sdcard though, I would back it up and reformat the ext partition!
Oh sh**, you have to install HSPL first!
Does the installer start or do you get thiserror before?
Click to expand...
Click to collapse
It's definitely not the SD-Card. I already wiped all partitions on it and repartitioned/formatted and i also tried another SD Card.
This Error appears when i try to install HSPL.

Azurewrath said:
It's definitely not the SD-Card. I already wiped all partitions on it and repartitioned/formatted and i also tried another SD Card.
This Error appears when i try to install HSPL.
Click to expand...
Click to collapse
You are in tricolor screen (bootloader) when trying to install HSPL and the word "serial" on bottom of phone changes to "usb"?

shanman-2 said:
You are in tricolor screen (bootloader) when trying to install HSPL and the word "serial" on bottom of phone changes to "usb"?
Click to expand...
Click to collapse
Yes, of course.
I now changed the USB cable and tried again and on the third try it worked: I now have HSPL 2.08 installed again. But now i can't flash MAGLDR or cLK again because RUU times out. Bah..

Azurewrath said:
Yes, of course.
I now changed the USB cable and tried again and on the third try it worked: I now have HSPL 2.08 installed again. But now i can't flash MAGLDR or cLK again because RUU times out. Bah..
Click to expand...
Click to collapse
I managed to install MAGLDR via SD-Card and to repartition the NAND. From there i booted into 4EXT Recovery, repartitioned the SD-Card and installed the NexusHD2 Android Image.
And now i am where i was in the beginning.
White HTC Screen
MAGLDR
Black HTC Screen
-> Reboot loop
ARGH.
Guess i have to buy a Nexus 4 or something.. sniff.

Not a bad idea!
But try to install clk 1.5, repartition your nand with it and install again (dataonext). Make the system partition 350mb or bigger.
Sent from my NexusHD2 using xda premium

shanman-2 said:
Not a bad idea!
But try to install clk 1.5, repartition your nand with it and install again (dataonext). Make the system partition 350mb or bigger.
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Sorry for answering so late, didn't really have time to tinker around with my Phone.
I installed cLK 1.5 and repartitioned the NAND with it. Installed a ROM aaaaand.. boot loop.
Guess some part of the Hardware is broken.. i only find it really strange that the WinMob ROM booted without problems.
Edit: OMG, i changed from the NexusHD2 2.3/2.3/2.5 ROM back to the 1.5 version you also use aaaaand... it boots! WTF, i used the 4.2.2 ROMs without any problems before...
Anyway, thank you very much for your help.