Database Users

Stuck on t mobile stick together screen...

ok so i had kumars v 1.4.. and than updated to his v 1.5.. to update, i synced the phone with active sync and ran the RUU file.. now im stuck on the tmobile stick together screen.. i dont want to touch the phone until you can give me some advice
im showing
R 2.08.50.08_2
G 15.34.50.07U
D 2.10. KUMAR P1
PLEASE HELP!!!!!!!!!!!!!

Firstly, better to ask this in the kumar thread.
Secondly, try flashing it again, could be a bad flash.
Thirdly, your radio doesn't quite match the ones listed by kumar. (Although it is very close, so unlikely to be that.)
Oh, and you did do a hard reset after flashing, right?

yes hard reset was performed to no avail.. but just to clarify as long as i flashed HARDSPL the first time that will protect my phone from being bricked correct|?? because if thats so i will try to flash the rom again.. im not able to flash again because active sync is not recognizing the phone

oh i am so sorry.. thank you very much for your quick reply...

Take the battery out >> put it back in >> Hold down the volume down button >> press the Power button. This should take you to the bootloader screen and from there you should be able to reflash.
Good luck

Flash the stock ROM again from the bootloader as the above poster has stated. If not flash the ROM from the MicroSD card.

AllTheWay said:
Flash the stock ROM again from the bootloader as the above poster has stated. If not flash the ROM from the MicroSD card.
Click to expand...
Click to collapse
The stock rom isn't out yet.
2.10.0 is out, but the hd2's came shipped with 2.10.1
Working on it.

Well.... Any updates? Im sure you didnt go to sleep with it being stuck on the StickTogether screen lol

If I was the Op, I'd task 29 and reflash. It should works fine. I've never brick and htc phone and I dont think the HD2 is that easily brick if you use common sense.

romeo0119 said:
If I was the Op, I'd task 29 and reflash. It should works fine. I've never brick and htc phone and I dont think the HD2 is that easily brick if you use common sense.
Click to expand...
Click to collapse
the tmous is realy easy to brick. just flash any radio with a ..51.. version.......... brick.

alright..so what ended up happening is from boofloader i tried to reflash 1.5 to no avail..
so rather than trying to figure out how to flash back to stock rom, i figured i would try kumars 1.4 which i had installed previously. And sure enough everything worked again .. sorry it took so long to update. last night it wa s too late for me to post and ive been working the whole day..

pookeee said:
ok so i had kumars v 1.4.. and than updated to his v 1.5.. to update, i synced the phone with active sync and ran the RUU file.. now im stuck on the tmobile stick together screen.. i dont want to touch the phone until you can give me some advice
im showing
R 2.08.50.08_2
G 15.34.50.07U
D 2.10. KUMAR P1
PLEASE HELP!!!!!!!!!!!!!
Click to expand...
Click to collapse
I had exactly the same problem when flashing v.1.6. Then I flashed back v.1.5 and it works OK.

Hi I have the same problem, though I didnt flash a custom rom.
I'm stuck at the stick together screen, after flashing a stock rom to my tmobile hd2.
I tried to reflash but it gets stucked at 0%, and it wont move.

Raioneru said:
Hi I have the same problem, though I didnt flash a custom rom.
I'm stuck at the stick together screen, after flashing a stock rom to my tmobile hd2.
I tried to reflash but it gets stucked at 0%, and it wont move.
Click to expand...
Click to collapse
try to force it into bootloader first and then flash.

HotShotAzn said:
try to force it into bootloader first and then flash.
Click to expand...
Click to collapse
I did it, it is still stuck at 0%

did you flash from sd card? what does your spl say in bootloader? could be that you have flashed away hspl, and the stock you are trying is not quite a match. (There are several 'stock' versions i believe)
try re aply hspl, flash the rom from usb, then use the hspl app again to remove the hspl, and hey presto, , back to stock.

I dont have the red inscriptions when it shows the sticck together logo.
I didnt flash from the SD card(...) basically this is a stock phone with a stock rom I guess.
so I tried HSPL2_1024_RUN
it told me that my version was 2.08.0000 and it gave me 2 choices, going to 2.08.HSPL
I tried both, but it gives me an error.
CRITICAL ERROR
Flow: 00000006
Error code: 00000000
Description: Unknown
ps: Im constantly on the forum, so just reply and I will reply within 5 mins

go into bootloader manually, plug into a usb port around back of pc, use one you dont usually use, wait for it to connect, and run hspl1024, remembering to right click & run as administrator. Choose 2.08.hspl, and cross your fingers. Ill cross mine for you too.
if hspl wont load, all i can suggest is different usb ports, maybe remove the drivers, and letting it downoad new ones from the net, especially if you've ever used mtty.

ok so it does not work, hum I guess i'm screwed what can I do?

by the way here is whats written on the bootloadeer screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40

Possibly bricked HD2, please help.

Hey, so I have an HD2 that was flashed badly. No problem, enter bootloader, reflash, right?
Strangely enough, it was acting strangely, and would freeze while in bootloader mode (plug in, nothing would recognize it, plug out and USB is still on the screen).
I pull the battery, try again, and get to flashing the Radio, it stops at 96%, and then fails. Try to do the recovery, but when I restart it, I a triangle with an exlamation mark (!), and I can't enter bootloader.
So, is that it...?

Oook, so I got into bootloader, flashed the HardSPL ver to 2, trying to flash the radio again, and it's not moving at 0%...

I'm having a similar issue. I have cotulla's HSPL 2.08 and I cannot flash ANY rom, no stock t-mobile, no android, nothing! Someone please help us! I would hate to see our HD2's go in the drawer and be forgotten
T-MOUS

boymeetsfence said:
I'm having a similar issue. I have cotulla's HSPL 2.08 and I cannot flash ANY rom, no stock t-mobile, no android, nothing! Someone please help us! I would hate to see our HD2's go in the drawer and be forgotten
T-MOUS
Click to expand...
Click to collapse
By any chance was the existing ROM the 3.14 one?

CrowJA said:
Hey, so I have an HD2 that was flashed badly. No problem, enter bootloader, reflash, right?
Strangely enough, it was acting strangely, and would freeze while in bootloader mode (plug in, nothing would recognize it, plug out and USB is still on the screen).
I pull the battery, try again, and get to flashing the Radio, it stops at 96%, and then fails. Try to do the recovery, but when I restart it, I a triangle with an exlamation mark (!), and I can't enter bootloader.
So, is that it...?
Click to expand...
Click to collapse
Try and flash the stock (or branded) ROM, either by USB or SD method.

No, I installed that update when it came out, seemed to make the phone worse so I went back to 2.13

boymeetsfence said:
No, I installed that update when it came out, seemed to make the phone worse so I went back to 2.13
Click to expand...
Click to collapse
a friend was doing similar ...
he upgraded to cotulla's HSPL 2.08 no problem, but when updating to most recent radio to allow him to play with putty or energy it froze at 96% and now just boots to ! screen
will not acknowledge attempts to SDcard flash, and his attempt to flash with latest stock HTC rom fails at random spots between 1% and 45%
going to grab an old stock rom and try voldown/power into tricolor and downgrade I guess

may have had some success ... seems his sdcard was formatted as FAT not FAT32 (doh!)
put duttys latest on the card and sd flashed that no problems, then put latest radio on card and sd flashed that, made it to 100% but 10 mins later and radio flash attempt still sitting at 'update in progress' with bar at 100%
guess I'll try with HTC stock via sd now
no joy there either ... hangs after attempting to flash the first radio portion

RESULT! seems the root cause was cotulla's HSPL 2.08
Ran HSPL_2 went back to 1.66-HSPL
then installed stock 1.48.405.2 which flashed completely and cleanly
phew

hd2 died help!
i accidentaly flashed an incorrect radio rom and thats where my problem started. although it still vibrates continusly once i put the battery back but im not sure if i can revive this. please help me out.

I managed to flash the latest radio successfully with 1.66-HSPL in place.
I just bullheadedly continually kept reattempting to sdcard flash just the latest radio, maybe 15-20x it either locked or gave me RSA errors.
Just before I was about to fling it into the fireplace, it just *worked* for no apparent reason ...
Just whacked Dutty's latest on there, and now happily looking at the 'tap next to begin screen'

[Q] Stuck on white screen while booting up.

Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?

enadiz said:
Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?
Click to expand...
Click to collapse
Try re-flashing HSPL.

I'm having the exact same problem.
I have opened a thread with this question few hours ago
Is there someone who can help us?
@digital outcast
re-flashing hardspl did not make the slightest change... :S

I assume both of you have tried flashing back to a WinMo ROM right? Does that flash to it ok and provide the same end result (white screen)?

in my case, it doesn't even flash because when CustomRUU starts, and the process begins (everything normal), the indicator freezes at 0% until it gives a communication error and all process is aborted!

the indicator freezes at 0%
Click to expand...
Click to collapse
When you flashing WinMo? If not(if you flashing android), I think problem is with wrong radio

And you tried a task 29 beforehand? Do you have any antivirus / firewall software running that you can disable temporarily?

Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!

tpmonteiro said:
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
Click to expand...
Click to collapse
Ditto, I have not tried the 1.66 Wmo rom though, will try that and MAGDLR 1.13 when I get back home later.
Anyone else who encountered this problem before? Thanks !

Can you go back to WINMO using LEOIMG.NBH and VOL.DOWN?
Can you boot into WINMO6.5 without problems?

Neither!
The update through HSPL is sucessfully completed, but when phone restarts, white screen appears immediately after...
I've also tried to flash other radios (the latest was installed) but the update fails everytime (through hspl).
I had MAGLDR 1.12 installed and it ran before booting the OS (android), but the white screens appears before that.
Damn!!!
Any ideas?

It actually looks like this when I try to flash a stock rom + radio over the SD card.. http://forum.xda-developers.com/showthread.php?t=618084
UPDATE FAIL

Bricked Phone - Did android NAND kill it?

My phone has been running an Android NAND for a couple of months, and the other day it just froze and then on rebooting i get a plain white screen.
I can get to the bootloader and so far nothing flashes to it
HSPL - Critical Error
SD-CARD flash - red numbers or just continual loading
USB flash - sits at 0% then gets error
so what killed my phone?
and is there ANY way i can get it working again, if not...i will throw it in the bin or perhaps smash it up with a hammer and post a youtube video here...im that annoyed! I wouldnt mind if i continually flashed roms, but i didnt...flashed on Android NAND and now its dead.

Find yourself a standard Winmobile rom and radio for the HD2 (if yours is a TMOUS device make sure you choose the correct radio and rom type for this device) and flash them to your device. With a bit of luck your device should then boot up.
If you then wish to go down the Android route again then read and follow all the instructions on here to do so. Don't forget to make sure your battery is fully charged before you attempt the reflash.
Good luck, hope it goes well.
WB

hi,
the battery is fully charged, but this is the problem i have..i cannot flash anything to it via sdcard or usb both give errors.

htcjrs said:
hi,
the battery is fully charged, but this is the problem i have..i cannot flash anything to it via sdcard or usb both give errors.
Click to expand...
Click to collapse
Do you still have the Andriod ROM on your HD2? If so boot into MAGLDR by turning the HD2 off and then pressing andbolding down the power button. Then use the volume up and down keys to scoll through the menu and find recovery and press the send button to select.
If you nolonger have the Andriod ROM then I suggest running a Task 29 on your HD2 then try to flash the official ROM to your HD2. If you are still having trouble getting it to flash do not get discuraged just keep tring to get it to flash, heck trythe USB method for awhile then try the SD card method for awhile. For some unknown reason to me a lot of people here on XDA have been having trouble getting their HD2 to flash a ROM. But all of them just kept trying and eventually got it to flash a ROM. Best of luck.

tried and tried and tried again, anyone wants this brick for free, i will post.

htcjrs said:
tried and tried and tried again, anyone wants this brick for free, i will post.
Click to expand...
Click to collapse
Did you run a Task 29 on your HD2 as I mentioned in my previous post? I beleive this will help you out. Also if you still have MAGLDR on your HD2 you can try to reflash the Andriod ROM. If you no longer have MAGLDR on your HD2 then you can reflash HSPL 2.08 and reflash MAGLDR by usinig the bootloader and the try flashing the Adriod ROM. Just make sure the white bar of the bootloader screen says USB and not Serial before you try to flash anything.

T-Mac, I have this problem. It's not something as simple as with MAGLDR or CWM. You can't even get a bootscreen let alone flash anything from HSPL (everything sticks at %0) lol.
Dude, your best bet is to try go flash a custom WinMo ROM. I used one of Artemis' ROM's. It had a .nbh file so I renamed it to LEOIMG.nbh and put on my SD card (512-4GB max) and then boot to HSPL and it'll allow you to flash the ROM.
It'll flash correctly but once it reboots it'll go back to the white screen. After that, it'll be able to charge when off so let it charge overnight while off, then in the morning try unplug the USB from the phone then pull battery and put it back in then try boot. It worked like 3 times for me so you might aswell try it.
I personally think it's a problem with MAGLDR and maybe it becomes corrupt or something.

hi
im gonna try this now, but i have a small problem...it did flash HSPL and now it is on 2.08.000 and it wont flash back
its one nightmare after another.

made a little progress, when trying to flash stock rom from sd it just sits on loading.... no error but doesnt do anything else.

Try this turn your HD2 off and remove the battery for a couple of minutes and then put the battery back in. I do not know if the HD2 has a reset like this or not. But a lot of electronicsreset certain things when all power is disconnected. This may not help but what can it hurt. Best of luck.

htcjrs said:
tried and tried and tried again, anyone wants this brick for free, i will post.
Click to expand...
Click to collapse
I'll take it. In this day of T-Mo being sold off, I need a challenge to distract me and keep me happy

[Q][HELP!] Cant install MAGLDR

Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!

calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??

ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me

white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.

Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.

ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?

Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%

do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084

Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse

demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!

davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?

either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return

Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)

davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.

your phone turned off??? is your battery dead??

orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?

Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please

You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk