Hi,
Firstly could not post this in developers as I have less than 10posts so if an admin would like to move it, please feel free
I installed DFT v5 on HSPL version 1.20.xxxx. OK all was smooth everything was going fine, Thought I would download Angry Birds and play the trial for a few mins. Here comes the bombshell! My handset froze rebooted to the HTC logo 7 vibes of death (radio or some boot problem). When I booted to tri colour screen, I was prompted with SPL 1.20xxxx NOT HSPL which I had installed for over a few weeks . Somehow playing Angry Birds trial reverted my SPL? (How is this possible? I know MS are sneaky). Or did my hanset just screw up in a 1in a 1,000,000.. Still scratching my head
Thanks
Related
I had installed HSPL tried to install HSPL2-Run and the installation stopped in the middle and left me a message: HSPL IS DUNE since got deleted the HSPL went back to the SPL 142 and when I try to install again HSPL from different kind of shows me a screen three colors is followed by a white screen Rewrite him LOADING device we get stuck and when I take out the battery Machshr Neidlk acts which re-update but not a rum or HSPL.
Does anyone have a solution? I want to upgrade ROM, but I am afraid to do so without HSPL
Thanks for help.
Try HSPL 1.
Once the update has completed you'll get a message on the phones screen
'We Hacked It'
You'll then get a message on the computer asking if you can see 'we hacked it on your phone' - click yes and then wait til the phone boots into Bootloader.
It should now say HSPL
I Think you may have unplugged your phone during the We Hacked it screen - this is too early - i've done the same myself and wondered why it didnt work.
But just another note -- Never Install a cooked ROM without HSPL!!!
I tried but the black screen installation which ran from 1 to 100 does not cost at all but we get stuck on the white screen of the device we get stuck LOADING
Hi there everyone!
I installed a NAND Android Rom Dl Desire Z or something... everything was working, but suddendly phone just crashes, and nothing but a white screen appear as soon as HD2 powers on.
The only thing i'm able to do is to go to 3 color mode (hardspl) - but all attempts to flash a wm6.5 rom failed because customruu failed in the middle of the process. freezes at 0% and then appears a communication error in the application.
Conclusion: as soon as phone turns on, only a white screen appears, with nothing written in it.
i've searched for 2 hours in xda and google, nothing similar came...
i've reflashed hardspl3 - sucessfull, but nothing changed, white screen still appears.
i've tried to flash other roms but always freezes at 0%, and appears communication error in customruu application.
I don't know what to do :/
Is there anyone who can help me?
Thank you very much!!
If you can still get into bootloader and you do have hspl installed, try flashing the winmo rom via sd card.
Will do!
I'll post feedback
Start flashing official 1.66(its EU, you need analog to 1024 LEO) WM 6.5 rom from HSPL, than HPSL3, radio with 576 RAM(Radio_2.15.50.14 for example), than MAGLDR112, and after these steps flash Android
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
Hello
Im thinking maybe your motherboard as many tmous users ?.. just thinking..maybe?? I don't hope it for you
Sent from my HTC HD2 using XDA App
It doesn't make sense :S
I never had any problem with it, and it was running a new Android rom for the second time.. then I take the phone out of the pocket and it is with a white screen...
I can get to the hspl boot but it isn't proving useful...
Any thoughts?
hey my friends...i am facing problem with my phone which is after installing andriod the mobile became black screen and just vibert
what model
what rom
what hspl
what magldr
whats the last thing you did (not just 'flashed android', , the exact last sequence of events, exeample ''i flashed hspl, i flashed a new radio, now all of a sudden nothing happens')
first of all thanks for responding...second my phone is T..mobile hd2..i had problem with freezing always the phone goes to "stick together" and freezed so i reset it for many times so the internal memory became smaller and smaller after that an error came wich is "fileo...." so i went to fixer and he told me that he will install andriod so he did it and after that he told me that the phone no accepting andriod that is why it is black screen and just viberte
hmm, sounds like faulty hardware. no help from me, sorry.
guys, friends help me to get out from this problem....becuase i told one of them and he told me thaT the boot is gone and you have to buy it 150 $ ...is this for real
thats about how much a new mainboard costs if you send it to htc, yea,
Sound like your mainboard hw problem.. if not.. try clean instalation wm try to go bootloader
HD2 TMOUSA
rom : TyphoonCyanogenMod 7
radio: 2.15.50.14
LINTEAM LEADER(gpu dev)
ok... tried to be clever and install android onto my htc hd2 uk...on to the NAND
so i first installed hspl4 .. fine onto 2.08
then added the 2.15.50.4 radio fine
then added magldr 1.13 fine
so tried to install prj_build v0.32 - looked ok... then when it seemed to be installed jst sat on reset - could press any buttons nor rest so removed batt and reset- then it just sat at the GO GO GO SCREEN EVERYTIME I BOOTED...
NOTHING..
tried to install back a hspl3 or the older version of magdlr 1.11 no change- so tried to go back to win 6.5 - would simply sit on the install screen HTC 0% - then come up with a communication error
On the tri strip screen / red/green/blue etc states cotulla 2.08 hspl- tries to install the stock rom 3.14 - installs upto a 100% reboots and then I'm left with the lovely pink loading circle from T-Mob...
No matter what i try or install i cant either get any android rom working or the win 6.5
after any help or guide what so ever thanks
did you try other roms as wel?
mr.rubberball said:
ok... tried to be clever and install android onto my htc hd2 uk...on to the NAND
so i first installed hspl4 .. fine onto 2.08
then added the 2.15.50.4 radio fine
then added magldr 1.13 fine
so tried to install prj_build v0.32 - looked ok... then when it seemed to be installed jst sat on reset - could press any buttons nor rest so removed batt and reset- then it just sat at the GO GO GO SCREEN EVERYTIME I BOOTED...
NOTHING..
tried to install back a hspl3 or the older version of magdlr 1.11 no change- so tried to go back to win 6.5 - would simply sit on the install screen HTC 0% - then come up with a communication error
On the tri strip screen / red/green/blue etc states cotulla 2.08 hspl- tries to install the stock rom 3.14 - installs upto a 100% reboots and then I'm left with the lovely pink loading circle from T-Mob...
No matter what i try or install i cant either get any android rom working or the win 6.5
after any help or guide what so ever thanks
Click to expand...
Click to collapse
Perform TASK29 and then start over the process. Make sure the build you are using is compatible with HD2 EU.
Also try CWM. That way if one build doesn't work, you can try different build just by downloading new build. You will not have to go through the process of task29.
OK. It's not me who have the problem and I may not provide you enough information. However, I will try as much as I can to get the info from the man who has the problem.
A friend of mine got an used HD2, with stock WinMo. The fist thing he did was of course hard-reset it. Aaand the system got ****ed up. He couldn't boot it sometimes (had a grey screen, he said with some weird text under, like Boot_W_PWE_KEY_PRESSED or BOOTUP_W_WARM_RESET after trying to install sth, few times it managed to boot up but lagged so much). I ignored it and wanted to do task29, radio, magldr, android. First thing - HSPL. Downloaded HSPL4, installed HSPL 2.08 fine. Then - Task29 + Radio. And nothing. ROM Code Error. After few tries, HTC logo and progress bar showed up. Task29 is stuck on 96% though and then displays an exclamation mark in a triangle.
After a restart, grey screen is still present.
We can't install magldr as well (dat error again).
What could go wrong?
try use HSPL3 cuz HSPL4 is for wp7 mango but not for HD2 Leo
Demo3827 said:
try use HSPL3 cuz HSPL4 is for wp7 mango but not for HD2 Leo
Click to expand...
Click to collapse
You need to study more.
OK, so we managed to install magldr on 11th? try and on 21st try we managed to boot Android from SD.
I'm pretty sure that NAND is damaged (NAND Android and WP7 couldn't boot at all, 1E FATAL HIT, same was with Android SD, but after many tries it booted), but when the phone hangs up after trying to play Angry Birds (so much that only thing he could do was to pull out the battery) and sometimes hangs up just for a while without a particular reason means that something else is damaged as well?
Boot loader
Has he tried booting into the boot loader.
Hold the down volume button and the power key at the same time.
If he gets a multi-colored screen then he is not bricked.
By 'bricked' I mean unusable because of physical damage that doesn't allow to run the phone properly.
Oh. Also he managed to install and boot WP7. It will return a 'Fatal hit' if it won't have enough break without a battey. It boots only after few mins turned off (which makes installing cabs almost impossible D: )... It was bought used, I think it had fallen and few more components were damaged...