Related
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate
Moved to HD2 Android Q&A and General
I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?
Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.
And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?
Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.
Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
There are the Android versions that run off sd card which run as a dual boot with winmo.
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..
Believe me that i've tested that way, and another ones, so as to get it work, but no luck.
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.
chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?
I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks
cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this
Hi,
Today I've tried to install android onto my HD2. After installing 'mgdlr' to my phone it stopped doing upgrades alltogether.
Mgdlr did install correctly but after the reset I only got that white HTC screen.
I know I have to press the power button really long etc etc (I've read the guide thoroughly).
Now, when I try to install anything it doesn't go any further than 0%. Not with any (official) ROM, radio etc.
I've done several hard resets, soft resets and re-installs but nothing gets past 0%.
Does anyone have any clue what happened and why I can't install a ROM and perhaps knows how to fix it?
What are you trying to install? An android rom? Are you going to the flashing mode in magldr? it's option 4 or 5, I think. Magldr was installed successfully? What radio do you have?
I was indeed trying to install an android rom. My radio version was/is 3.14.404.2
I never got to that mode. I've seen it in video's but mine doesn't. I only get that white screen with, in green letters, HTC on it. No matter how long I hold down the power button.
Btw, I said that magdlr installed succesfully because it installed without errors. But I think it's malfunctioning because it obviously isn;t doing what it's supposed to. Re-installing it isn't an option because it hangs at 0%
Did you try task29? might help with your upgrading issues.
VioL3nZ said:
I was indeed trying to install an android rom. My radio version was/is 3.14.404.2
I never got to that mode. I've seen it in video's but mine doesn't. I only get that white screen with, in green letters, HTC on it. No matter how long I hold down the power button.
Btw, I said that magdlr installed succesfully because it installed without errors. But I think it's malfunctioning because it obviously isn;t doing what it's supposed to. Re-installing it isn't an option because it hangs at 0%
Click to expand...
Click to collapse
Which NAND rom did you use?
You mean your radio is 2.14.404.2 right, not 3.14.404.2?
Also what is your SPL, it appears in the tri color screen/bootloader.
Kailkti said:
You mean your radio is 2.14.404.2 right, not 3.14.404.2?
Also what is your SPL, it appears in the tri color screen/bootloader.
Click to expand...
Click to collapse
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
VioL3nZ said:
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
Click to expand...
Click to collapse
if your spl is 2.08.0000, first, how did you get magldr to instal since it requires hspl? second, if you removed hspl after flashing magldr (hence 2.08.0000 and not 2.08.hspl as it should be), why?
enter bootloader, does it really say 2.08.0000?
You dont have to press the power button for 'really long' only about 5 seconds, so long as its the right 5 seconds, , , start the phone, first splashscreen appears, just as the first splashscreen is about to end, (after around 5/6 seconds) start pressing power, and keep it held till the magldr menu appears.
VioL3nZ said:
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
Click to expand...
Click to collapse
Mate, I need more info.
1. Your device version (branded or non branded?)
2. Your rom version before you start anything (stock or custom rom?, if stock, is it version 3.14 (the latest one)?)
3. Version of Android (NAND or SD Android?)
4. Are you planning to have dual boot WP7 and SD ANdroid?
5. Do you have HSPL installed?
The solution will depend on your answer on the above question
Cheers
Ive tried task29 but it does the same as any other update. It just wont let me flash anything, it keeps hanging at 0%
silverwind said:
Mate, I need more info.
1. Your device version (branded or non branded?)
2. Your rom version before you start anything (stock or custom rom?, if stock, is it version 3.14 (the latest one)?)
3. Version of Android (NAND or SD Android?)
4. Are you planning to have dual boot WP7 and SD ANdroid?
5. Do you have HSPL installed?
The solution will depend on your answer on the above question
Cheers
Click to expand...
Click to collapse
1. Its a non branded version
2. It was the latest stock rom
3. I was going for a NAND version
4. I wasnt planning on having a dual boot
5. I have the latest hspl installed (2.08.0000)
Additional info:
When running task 29, first it says From: image version:
To: image version: 2.0.00.00
And when I start the progress bars appear on both my comp and phone.
Afterwards it gave me a communications error.
VioL3nZ said:
1. Its a non branded version
2. It was the latest stock rom
3. I was going for a NAND version
4. I wasnt planning on having a dual boot
5. I have the latest hspl installed (2.08.0000)
Additional info:
When running task 29, first it says From: image version:
To: image version: 2.0.00.00
And when I start the progress bars appear on both my comp and phone.
Afterwards it gave me a communications error.
Click to expand...
Click to collapse
Ok. Let's start from the very beginning.
Find the CORRECT STOCK ROM first. You go to htc website and use your serial number to download the rom. Make sure your downloaded file is not corrupt.
Get micro sd and use PC to format it to fat 32.
Extract the stock rom and find file with the name: RUU_signed.nbh. Rename it to: leoimg.nbh.
Turn off the phone (make sure battery at least 50% capacity), put your micro sd.
Now, press the VOLUME DOWN BUTTON (don't release it), then press POWER ON button at the same time until white screen appear. Now, follow the on screen instruction.
If you succeed, check your spl by going into boot loader screen.
If your spl is other than spl 3.03, you can continue with next process. Installing SPL 3.03 HSPL.
Then, Do task 29. Then, flash radio 2.15.xx. Then install magldr 1.13.
All process can be done while in the boot loader screen.
If you succeed, you will be brought to mgldr screen. Select option no.5 (USB flasher) and press the green phone call button and connect it via USB, now run the NAND ANDROID you choose from your PC. If fails, retry the process from magldr screen and try different USB port. Also, make sure your anti virus, firewall, and Internet is turn off.
Good luck...
Thank you man, it worked!
I did everything you said and my phone is back up and running
Thanks!
VioL3nZ said:
Thank you man, it worked!
I did everything you said and my phone is back up and running
Thanks!
Click to expand...
Click to collapse
Glad you solved it
dear please help me too. i had wm 6.5 and android running on my hd2
i want to installa wp7 but when i want to update my radio it stucks at zero
i tried to put the LEOIMG.nbh and did as u said but it stucks at the white screen and says loading.... only
i cant uninstall hspl nor can i use the stock official rom to make my hd2 as normal.
pls help. thanks in advance
Hey
I used the search button, but didn't find something that resembled my problem.
This is my problem:
*When I want to update my magdlr 1.11 to 1.13 through bootloader (I have
usb connection) the program keeps getting stucks at 0%
I have radio (Leo_RADIO_2.15.50.14) that support 576mb Ram and I use "ROMUpdateUtility", which I start as adminastrator.
*When I try to update to magdlr 1.12, the exact same thing happens :s
*Hopin' to start from the beginning: I use Task29, that aswell gets stuck at 0%
*When I want to start from the BEGINNING (back to 6.5 winm), I use the stock 1.66 NDL HTC HD2 which I used to downgrade my firmware. That also gets stuck at 0%
UPDATE:
I JUST DISCOVERED WHEN I USE THE "THE PDA PHONE ROM UPDATE UTILITY" i SEE THIS:
FROM: IMAGE VERSION: (NOTHING,COMPLETELY EMPTY)
TO: IMAGE VERSION: 2.0.00.00
I use the bootloader with spl-2.08.0000 with a WINDOWS 7 laptop 64bit in administrator mode and tried with 2 different usb cabels with/without a microsd card of 1GB. I flashed steps 1-6 (see below) with no problems and I tried several usb ports and rebooted the laptop several times.
I just bought a 2 week old HTC HD2.
I didn't remove Winm 6.5, when I installed Magdlr, WinM didnn't come up
These where my exact steps and all the files came from this site:
1) I downgraded the htc hd2 firmware to have spl to 1.6 from 3.03(something)
2) I used Hspl to Hspl 2.08 (something) (with windows center mobile 6.1 (update))
3) I updated the radio to Leo_RADIO_2.15.50.14
4) I used magdlr 1.11
5) I went to usb mass storage on magdlr and put "TyphooN_CM7_v2.5.1" (from this site) on the SDcard
6) I then went to USB flasher and went to the "Recovery 135M" (from this site) and executed DAF.exe and followed the steps
7) my phone rebooted
8) FROM THIS MOMENT ON,I REALISED I NEEDED MAGLDR 1.13 INSTEAD 1.11 AND FROM THIS MOMENT the HTC keeps at 0% when I try to do anything.
I hope you understand my ramblings.
Could you please help out, got this as a birthday gift and my dad is going to get pissed after using an iphone 2G for 5 years long :-(
2.08.0000 is stock, any spl in Bootloader that ends. 0000 is stock. Task29, magldr, all need hspl, 2.08.0000 is not hspl. Whenever you flash stock from SD card, hspl is gone.
Re apply hspl.
Man, If I were gay, you wouldn't know what I would do to you !!
I love you man, seriously, I'm staling you now
Hartendief said:
Hey
I used the search button, but didn't find something that resembled my problem.
This is my problem:
*When I want to update my magdlr 1.11 to 1.13 through bootloader (I have
usb connection) the program keeps getting stucks at 0%
I have radio (Leo_RADIO_2.15.50.14) that support 576mb Ram and I use "ROMUpdateUtility", which I start as adminastrator.
*When I try to update to magdlr 1.12, the exact same thing happens :s
*Hopin' to start from the beginning: I use Task29, that aswell gets stuck at 0%
*When I want to start from the BEGINNING (back to 6.5 winm), I use the stock 1.66 NDL HTC HD2 which I used to downgrade my firmware. That also gets stuck at 0%
UPDATE:
I JUST DISCOVERED WHEN I USE THE "THE PDA PHONE ROM UPDATE UTILITY" i SEE THIS:
FROM: IMAGE VERSION: (NOTHING,COMPLETELY EMPTY)
TO: IMAGE VERSION: 2.0.00.00
I use the bootloader with spl-2.08.0000 with a WINDOWS 7 laptop 64bit in administrator mode and tried with 2 different usb cabels with/without a microsd card of 1GB. I flashed steps 1-6 (see below) with no problems and I tried several usb ports and rebooted the laptop several times.
I just bought a 2 week old HTC HD2.
I didn't remove Winm 6.5, when I installed Magdlr, WinM didnn't come up
These where my exact steps and all the files came from this site:
1) I downgraded the htc hd2 firmware to have spl to 1.6 from 3.03(something)
2) I used Hspl to Hspl 2.08 (something) (with windows center mobile 6.1 (update))
3) I updated the radio to Leo_RADIO_2.15.50.14
4) I used magdlr 1.11
5) I went to usb mass storage on magdlr and put "TyphooN_CM7_v2.5.1" (from this site) on the SDcard
6) I then went to USB flasher and went to the "Recovery 135M" (from this site) and executed DAF.exe and followed the steps
7) my phone rebooted
8) FROM THIS MOMENT ON,I REALISED I NEEDED MAGLDR 1.13 INSTEAD 1.11 AND FROM THIS MOMENT the HTC keeps at 0% when I try to do anything.
I hope you understand my ramblings.
Could you please help out, got this as a birthday gift and my dad is going to get pissed after using an iphone 2G for 5 years long :-(
Click to expand...
Click to collapse
You're useless not the hd2 lol do your homework before doing anything would be a good idea.
Hartendief said:
Man, If I were gay, you wouldn't know what I would do to you !!
I love you man, seriously, I'm staling you now
Click to expand...
Click to collapse
Hehe, just put in a good word for me if judgement day arrives or alien overlords come a'conquering.
Thank you, thank you thank you SAMSAMUEL!!!!
Hi folks,
I tried to flash my HTC HD2 for the first time. Read /watched different guides. In first 2 steps they were all the same:
- install HSPL
- instal MAGLDR
Done both, got positive responses on both.
BUT: after rebooting after installing MAGLDR I do not manage to get the bootloader screen. There´s just a white screen with green htc logo on it and nothing else happens.
Yes, I held the power button after reboot; about 1 min long. Nothing.
If I hold volume down button after reboot the stripey screen appears like after the HSPL installation. But there is also no menu.
Also tried to proceeed task29 with the HD2 Android NAND Toolkit. Got positive response there too and after this I begann from scratch. With the same results.
Does anyone have a clue what I made wrong or forgot?
Or a hint what to do now?
best regards
M.
What version hspl n magldr?
Sent from my LG-P999 using XDA App
and radio,
hspl MUST be 2.08.hspl ONLY
radio MUST be 2.xx.50.xx
Got hspl version 2.08.hspl from http://forum.xda-developers.com/showthread.php?t=611433
got MAGLDR version 1.13 from http://forum.xda-developers.com/showthread.php?t=893618
cant remember the full radio version but I checked it before starting and it fits to requirements.
But I´m a few steps forward...
Meanwhile I flashed the newest Original HTC HD Win Mobile 6.5 ROM so phone boots up again
After that I installed HSPL version 2.08.0000 (now I know that was a failure) an tried again to install MAGLDR. But the progress bar doesn´t move - neither on PC nor on phone...
So I first will try to install again HSPL like samsamuel said and try again with MAGLDR
[EDIT]
Radio Version is now 2.15.50.14
SOLVED
Don´t know why but after dooing all step again (after falshing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
MiMo99 said:
Don´t know why but after dooing all step again (after flashing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
Click to expand...
Click to collapse
the only regular hd2 stock rom that includes a magldr compatible radio is 3.14, so if the ''old rom'' you flashed was any other version, it will have also flashed a non magldr radio, which is why it happened. (I suspect).
Sorted now,
the same problem
Hi,
I have the same problem.
Just white screen with green HTC mark.
But I'm not shure how to flesh win mobile again, because I cannot connect my HTC HD2 via USB (PC doesn't recognise the phone).
tnx
Hey MiMo,
Could you please post links and steps to help myself and anyone else looking on how to fix this?
by links I mean can I have the stock rom you used and the radios and such
Thank you.
Hi, I had "HD2_NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR" rom on my phone.I wanted change it to "MIUI.us-ICS-Leo-2.7.13-HWA".First I made task29, then i installed magldr but screen freezed on magldr menu. Then i made task29 again and installed clk 1.5 this time.After edit setting, i press recover but appeared error on screen. Then i tried winmo but it stopped on different percentages (2,15,30 ,...)
I used HSPL 3 & 4 but nothing happend.I couldnt go in recovery mode in both of magldr & clk mode.
And now my phone is dead. I couldnt make task29 sometimes. I couldnt install any version of android and winmo.
Please help me.
goldfly90 said:
Hi, I had "HD2_NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR" rom on my phone.I wanted change it to "MIUI.us-ICS-Leo-2.7.13-HWA".First I made task29, then i installed magldr but screen freezed on magldr menu. Then i made task29 again and installed clk 1.5 this time.After edit setting, i press recover but appeared error on screen. Then i tried winmo but it stopped on different percentages (2,15,30 ,...)
I used HSPL 3 & 4 but nothing happend.I couldnt go in recovery mode in both of magldr & clk mode.
And now my phone is dead. I couldnt make task29 sometimes. I couldnt install any version of android and winmo.
Please help me.
Click to expand...
Click to collapse
Isnt anyone to guide me?!!!!!!!!
Flashing and doing task29 multiple times are harmful for any ROM . Every ROM has a read write life.
Anyways, just download the winmo from HTC site for your mobile.
Go to the tri color screen, and connect your mobile . USB will be shown in your mobile once connected.(I hope you have necessary drivers installed...if not install windows mobile device centre.)
And flash the ROM. N be patient....it may take some time..10..15mins. Just wait.
Sent from my T-Mobile HTC HD2 using XDA Premium.