Related
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate
Moved to HD2 Android Q&A and General
I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?
Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.
And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?
Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.
Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
There are the Android versions that run off sd card which run as a dual boot with winmo.
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..
Believe me that i've tested that way, and another ones, so as to get it work, but no luck.
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.
chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?
I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks
cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this
Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks
If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).
i have a problem like that
If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....
But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes
osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks
That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App
This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard
Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation
DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).
i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do
tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)
So guys I need help! I can't boot my phone! I can boot in to HSPL but that's about it. I can't boot in to MAGLDR. I tried running a Task29 but it just stays at 0%.
I've tried flashing MAGLDR and it's the same as the Task29... stays at 0%. Has my phone been bricked? Any help appreciated. I've tried flashing a stock ROM from SD and renaming the .nbh to LEOIMG.nbh but the first time I did it and it says to press power to confirm you want to flash it the phone just rebooted to the WSOD. Seems as though that changed my HSPL to HSPL.2.08.0000 now too instead of .HSPL. now all I get when I have the SD card in and boot to HSPL then when it boots to the grey coloured screen it just says "Loading...".
Is there anyway I can get my phone working again? Thanks.
Try to flash WM 6.5 1.66 version (or atleast the one below the most recent) trough SD method.
My kid brother had the same thing, the newest ROM (from HTC website) didnt work cause it gave a error.
If you keep getting some red error status while doing the SD flash, it might be bricked.
After a few tries with the SD method we were able to flash stock spl and such, but still the phone wasnt oke (but oke enough to send it for repair).
Skellyyy said:
So guys I need help! I can't boot my phone! I can boot in to HSPL but that's about it. I can't boot in to MAGLDR. I tried running a Task29 but it just stays at 0%.
I've tried flashing MAGLDR and it's the same as the Task29... stays at 0%. Has my phone been bricked? Any help appreciated. I've tried flashing a stock ROM from SD and renaming the .nbh to LEOIMG.nbh but the first time I did it and it says to press power to confirm you want to flash it the phone just rebooted to the WSOD. Seems as though that changed my HSPL to HSPL.2.08.0000 now too instead of .HSPL. now all I get when I have the SD card in and boot to HSPL then when it boots to the grey coloured screen it just says "Loading...".
Is there anyway I can get my phone working again? Thanks.
Click to expand...
Click to collapse
hope this helps
http://forum.xda-developers.com/showthread.php?t=591314
http://forum.xda-developers.com/showthread.php?t=668347
dont forget to click thanks
Lol, guys all I did was hold down the reset button on the back and it turned back on. HAPPY!
Though, I want to run a Task 29 but it's still stuck at zero.
Oh well, I have a working HD2!
Skellyyy said:
Though, I want to run a Task 29 but it's still stuck at zero.
Click to expand...
Click to collapse
Because you don't have hspl you removed it by SD card stock flash.
samsamuel said:
Because you don't have hspl you removed it by SD card stock flash.
Click to expand...
Click to collapse
I didn't flash the stock ROM. I didn't do anything, just held the red button in. It keeps acting up now. Think it's time to sell and buy a new one.
Skellyyy said:
I didn't flash the stock ROM. I didn't do anything, just held the red button in. It keeps acting up now. Think it's time to sell and buy a new one.
Click to expand...
Click to collapse
really? I think you did...
Skellyyy said:
So guys I need help! I can't boot my phone! I can boot in to HSPL but that's about it. I can't boot in to MAGLDR. I tried running a Task29 but it just stays at 0%.
I've tried flashing MAGLDR and it's the same as the Task29... stays at 0%. Has my phone been bricked? Any help appreciated. I've tried flashing a stock ROM from SD and renaming the .nbh to LEOIMG.nbh but the first time I did it and it says to press power to confirm you want to flash it the phone just rebooted to the WSOD. Seems as though that changed my HSPL to HSPL.2.08.0000 now too instead of .HSPL. now all I get when I have the SD card in and boot to HSPL then when it boots to the grey coloured screen it just says "Loading...".
Is there anyway I can get my phone working again? Thanks.
Click to expand...
Click to collapse
Just so you know, when you start a stock rom sd card flash, the first thing it does is reset the spl, THEN it tries to flash the rom, two seperate events, (the phone even restarts in some instances between changing spl and starting the rom flash) so even if the flash fails, or doesnt even start, theres a good chance spl has already been removed.
(side note for info - This situation is most likely to happen when flashing stock from sd card when hspl is installed, because the rom doesnt get rejected at first because hspl is there, but after the spl is reset and teh phone reenters bootloader, it no longer accepts the rom, because hspl is gone, so the phone is temporarily locked up with no hspl and no working rom.)
So, you now have stock spl 2.08.0000 and a non working rom.
enter bootloader,
run hspl (new hspl4 link in my sig)
choose 2.08.hspl
re enter bootloader
flash magldr (just to be sure its there)
if you need to, make sure your radio is high enough version (if you have tmous forget this, if its a regular it needs to be in the 2.10.50 or so version or higher)
from power off, start the phone, as the very first splash screen changes to the black magldr screen, start pressing power, untill the menu items appear.
Job done.
Oh and the line "....I have the SD card in and boot to HSPL ......" makes no sense. You are booting to bootloader. its still bootloader whether it has spl or hspl. Your terminoligy will confuse you.
Well I highly doubt I did. Maybe it just updated the HSPL but that's all. Didn't even get rid of MAGLDR on my phone! When I held in the reset button, it booted straight to MAGLDR.
Maybe mine was just a fluke!
lol thats what i said, in a long winded way. when you run an sd card flash the first three or four seconds it loads the spl from the rom on the sd card, thus removing hspl.
(or in your incorrect words 'Maybe it just updated the HSPL but that's all' - correct, it 'updated' HSPL back to stock SPL)
but hey,its sorted, so no problem.
It's still HSPL though? It's just the previous version that's .0000 instead of .HSPL or am I completely off? Do I need to flash HSPL.2.08.HSPL again or can i just keep it .0000?
Lol I'm stupid. Sorry, realise now what you're saying now that I've looked at the SPL properly. So do you suggest I flash HSPL now?
Sent from my FutureShocks HD2 MIUI using XDA App
Lol,
One simple rule...
If it ends 0000 it is STOCK
If it ends .hspl it is hspl
Yes, run hspl.exe again, choose 2.08.hspl
Haha well atleast I've learned now. I don't even read the first part which just said SPL. Fail. If I flash HSPL again do I need to flash MAGLDR again?
Sent from my FutureShocks HD2 MIUI using XDA App
possibly, cos teh same sd card flash that wiped hspl could have also removed the second splash screen memory area, which is where magldr lives. deopends how far thru the flash it got before it stopped.
easy to tell tho, let it boot, if you see the black magldr screen appear when the first boot screen vanishes,, quickly press power and it will stop there and show the magldr menu, if it hangs without showing teh magldr screen, magldrs not there, and you pull the battery, into bootloader, flash magldr.
samsamuel said:
Lol,
One simple rule...
If it ends 0000 it is STOCK
If it ends .hspl it is hspl
Yes, run hspl.exe again, choose 2.08.hspl
Click to expand...
Click to collapse
agree! absolutely right
Erm well after the white HTC screen I get the MAGLDR screen that boots to my NAND ROM. I pressed the power button while it was booting but nothing happened.
Skellyyy said:
It's still HSPL though? It's just the previous version that's .0000 instead of .HSPL or am I completely off? Do I need to flash HSPL.2.08.HSPL again or can i just keep it .0000?
Click to expand...
Click to collapse
You will still need 2.08.hspl if you want to reinstall or update your magldr version at some stage. It wont work on 2.08.0000.
Skellyyy said:
Erm well after the white HTC screen I get the MAGLDR screen that boots to my NAND ROM. I pressed the power button while it was booting but nothing happened.
Click to expand...
Click to collapse
Sounds to me like you arent rpessing quick enough. keep holding power from the moment you power on if it helps.
the instructions are to hold power (end key) right from turning on until magldr menu appears, but for me, i watch the first splash screen, and just before it ends (6-7 seconds) only then do i press and hold the end key. do not let go of the end key until teh menu appears, else it will continue to boto the rom.
Oh so all you wanted to know is if I can boot to MAGLDR menu? Yeah, I can lol.
Wait a minute, you can't have MAGLDR unless you have HSPL (HSPL3 2.08) if you have just reflashed HSPL, That means you still don't have MAGLDR, unless you have flashed it already in which case you still don't have a working ROM (Android or Windows 7) until such time you chose an Android or Windows 7 build. confusing?
Here is the sequence of flash events.
1. HSPL3 - 2.08HSPL
2. MAGLDR 1.13
3. Flash your chosen ROM.
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
more data needed.
it looks like you're saying it loads HSPL 2.08 then loads magldr then when it tries to load the ROM it gives the fatal thing right?
so what happens after you flash a winmo ROM? does it hang? where? what exactly happens when you turn on your phone? have you tried flashing stock WM6.5?
Yup the fatal error appear on magldr v.1.13
Ive tried task29..
Then when i tried install windows stock 6.5 it stuck on the white htc screen without any red letters on the bottom like usual..
It looks is a risk to do flashes, I have HTC HD2 and I'd lile to installa Android on Nand, but I'm scared by the possibles problems
flawlessx92 said:
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
Click to expand...
Click to collapse
I had the same problem. I tried every imaginable solution and nothing would work. I flashed WinMo from the bootloader screen, and SD card and it would sometimes load, but would freeze or hang up most of the time during boot. I tried flashing a DFT ROM, and it would boot about 20% of the time, and hang the rest. When it would boot, it would freeze once it got warm.
Luckily my phone was still under warranty.
fra1977 said:
It looks is a risk to do flashes, I have HTC HD2 and I'd lile to installa Android on Nand, but I'm scared by the possibles problems
Click to expand...
Click to collapse
The statistics are in your favor. If you were to compare all of the times that our HD2's have been flashed versus the amount that have been bricked, it would probably be less than 1% that have been bricked. IMO, Android is so much better than WinMo that it's well worth the risk.
....................
I have the same problem. After trying everything, now it sometimes boots into windows but after a while it suddenly stops working and reboots and sucks on white htc screen....
Tomorrow it will go back for warranty...
does anyone knows how this fatal hit error happens? I used the phone without problems for over 2 weeks with android on nand, before the problems started.
Sent from my HTC HD2 using Tapatalk
I think that this is the problem that made us wait too long for MAGLDR.. cotulla thought that he fixed it but looks like he didin't... i think the bootloader has overwroten the SPL..
Can you guys give more details about your HD2s like "When have you bought it" "which screen you have" ?
flawlessx92 said:
I've tried search engine,ive tried everything but my phone still wont boot up:
Im currently using HSPL2.08 and my phone was just fine installing Imilka's Desire HD Ram NAND version yesterday...Installed the rom via clockworkmod and it was just fine..but then yesterday my phone freeze so i pull out the battery..then when i started to boot up the phone again...at Magldr v1.13 the phone shows FatalHit error while loading ROM..Im using radio v2.15 btw
Stuff that I've tried to fix:
Tried Task29,Reflashed WinMo 6.5 stock rom v1.66,tried reinstall magldr v1.13 even tried v1.11 and tried using other radio,using 2 different sim cards and SD cards,tried flashing via USB(TriColour Boot) and SD...EVERYTHING!!
T~T I really dont know what to do...Please help...at this phone i just want my HD2 to be able to boot up again no matter what OS..just want my phone back..
Click to expand...
Click to collapse
It seems to me like many bad blocks on NAND...
How to verify that:
1) flash cLK (chose a partitioning your prefer)
2) via cmd run the following commands
Code:
fastboot erase boot
fastboot erase recovery
fastboot erase system
fastboot erase cache
fastboot erase userdata
If you have bad blocks it will show up in console of cLK
It will look like this
[6521] can't erase block @ 3424
[6521] bad block @ 3424 (or something like that)
You need to have adb drivers installed and fastboot.exe for the commands. If you don't have download them from here
Put the in a folder i.e. c:\android
navigate with cmd there and run the commands.
CWM can recognize bad blocks and skip them, therefore if you have many in each partition you can create larger partitions for /boot and /system and your phone will work properly until you decide to send it for repair.
If i remember well each block is 128KB
MAGLDR v1.13 on my HTC HD2
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these(
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15
Same problem here, it seems the problem is with HD2 1024mem.. Tmous?? will CLK installation will solve? anyone with more suggestion? I would really really appreciate..my hd2 is laying on table for 2 weeks now with no solution
Ive noticed the fatal hit error on the hd2s with those tiny dots in the screen.
sent from my Nexus S
teutakarakashi said:
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these(
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15
Click to expand...
Click to collapse
Your problem is wrong hspl.Magldr works only with hspl 2.08
sent from my hd2 using ics
WorldWide60 said:
The statistics are in your favor. If you were to compare all of the times that our HD2's have been flashed versus the amount that have been bricked, it would probably be less than 1% that have been bricked. IMO, Android is so much better than WinMo that it's well worth the risk.
Click to expand...
Click to collapse
agree with that
Did a hd2 the other day. Fatal hit error popped up. Done hundreds of hd2s. Bricked 2. On the particular hd2 i booted into magldr and did a reset. Had to reboot bout 20x to finally work. When it finally booted the touch was unresponsive. After another 10 or so reboots it finally stuck. Easy phone to mod but highest brick rating for me. I flash phones for a living so i know what im doing. Ive bricked my own g1 learning back in 09 and bricked 2 hd2s in 2011. There must be certain hd2s that dont accept the flash. Ive noticed the hd2s with the dots in the screen have been the only ones that give a hard time. Are theres the euro version? I only flash android on them not keep up with its development.
sent from my Sensation
Hallo,
I want to flash the original Rom wmo 6.5.
So i thought that i have to make a HSPL downgreat from 2.08 to 1.44.
And after that nothing.
No chance to get into the Bootloader or start it normaly.
Befor this i tried to install Android [JDMS Ultimate Nand Rom] but everytime i become the ERROR 262 From the PDA Upgread Utility. It stans still it 0%.
2 times of 200 replays it works but than MAGDLR 1.13 give me the fatal error 1 message.
Now i thougt my htc hd2 is brick or not?
What can i do that it never happens again?
Hope you can Help me
tmous or regular hd2?
tmous - its probably dead from flashing any rom that uses spl 1.42, , is it a tmous? (green send key, red end key)
regular - need more info,,, what rom did you flash? exact filename please,
I Thought i have the regular HD 2.
First of all HSPL 2.08 was installed on my HD 2 after that i installed a new Radio Rom Leo_RADIO_2.15.50.14 after that i installed magdlr 1.13.
All works fine but it dont boot.
go go go .... only fatal error1.
JDMS v1.6.2 Ultimate [Kernel: Hastarin 8.6N] NAND ROM
But then everytime i use PDA Rom Upgrade utility i stuck by 0% and i get the error 262 but it sometimes happend that i got the 100%.
After JDMS install that never boot up, i installed a Stock Rom (Original Rom)
from HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
But after 20 % it stuck.
I test Task29 and it works.
Then i installed HSPL2_RUN and installed HSPL 1.42.
And now i cant boot, i cant startup bootloader, i cant connect to pc.
Its totaly dead.
Fr3shGy said:
I Thought i have the regular HD 2.
First of all HSPL 2.08 was installed on my HD 2 after that i installed a new Radio Rom Leo_RADIO_2.15.50.14 after that i installed magdlr 1.13.
All works fine but it dont boot.
go go go .... only fatal error1.
JDMS v1.6.2 Ultimate [Kernel: Hastarin 8.6N] NAND ROM
But then everytime i use PDA Rom Upgrade utility i stuck by 0% and i get the error 262 but it sometimes happend that i got the 100%.
After JDMS install that never boot up, i installed a Stock Rom (Original Rom)
from HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
But after 20 % it stuck.
I test Task29 and it works.
Then i installed HSPL2_RUN and installed HSPL 1.42.
And now i cant boot, i cant startup bootloader, i cant connect to pc.
Its totaly dead.
Click to expand...
Click to collapse
so you're saying it DOES NOT have a green send key and red end key?
No its the Regular HD2 from Germany
Fr3shGy said:
No its the Regular HD2 from Germany
Click to expand...
Click to collapse
flashing that SPL should not have bricked your phone afaik. Did you do any battery pulls? (ben pins maybe?)
Yes, i thought 100 times in 2 days ...because everytime i got the 262 Error with 0% i had to pull the battery.
I ve looked at the pins but they looks fine.
hmmm ...but i dont get any led signal while im loading the battery?
Could i kill the battery? At the beginning everytime i loading the battery i got a Orange Led signal that it loads.
Fr3shGy said:
Yes, i thought 100 times in 2 days ...because everytime i got the 262 Error with 0% i had to pull the battery.
I ve looked at the pins but they looks fine.
hmmm ...but i dont get any led signal while im loading the battery?
Could i kill the battery? At the beginning everytime i loading the battery i got a Orange Led signal that it loads.
Click to expand...
Click to collapse
look again and make 100% sure none of the pins are even a little bent, because they may just not be connecting to all 3 battery slots, then put in the battery and plug in the phone and see if it gives a yellow charge light.
Could simply be a flat battery,,,magldr doesn't allow charging when the phone is off.
If you have an old USB cable, mini or micro, cut the end off, bare the red and black, battery out, hold red to + black to - on the battery for a minute or two, see what happens when you plug back in.
samsamuel said:
Could simply be a flat battery,,,magldr doesn't allow charging when the phone is off.
If you have an old USB cable, mini or micro, cut the end off, bare the red and black, battery out, hold red to + black to - on the battery for a minute or two, see what happens when you plug back in.
Click to expand...
Click to collapse
looks like he's not running magldr, from what I read he flashed task29 then HSPL 1.42, so he actually doesn't have anything on NAND atm
orangekid said:
looks like he's not running magldr, from what I read he flashed task29 then HSPL 1.42, so he actually doesn't have anything on NAND atm
Click to expand...
Click to collapse
task29 only flashes the rom memory area, not teh spl/splash/radio areas. HSPL only affects the spl memory area, magldr exists in teh secondary splash screen area, so isn't touched by either of those. Magldr of course wont start since spl is no longer 2.08.x, but i suspect the non charge bug will still be in effect.
(Just for the record, and since there are so many posts recommending it, i personally believe in 99% of cases where task29 is run, there is no benefit at all. it just adds yet another write cycle to our already overstretched nand memory. flashing a new cwm partition will have the same effect.)
samsamuel said:
task29 only flashes the rom memory area, not teh spl/splash/radio areas. HSPL only affects the spl memory area, magldr exists in teh secondary splash screen area, so isn't touched by either of those. Magldr of course wont start since spl is no longer 2.08.x, but i suspect the non charge bug will still be in effect.
(Just for the record, and since there are so many posts recommending it, i personally believe in 99% of cases where task29 is run, there is no benefit at all. it just adds yet another write cycle to our already overstretched nand memory. flashing a new cwm partition will have the same effect.)
Click to expand...
Click to collapse
weird, last time I flashed task29 even with 2.08 I thought magldr didn't start and it didn't go past the splash, maybe I was wrong.
@ OP. have you tried to use a different battery?