[q] help, booting problem TO CLOSE - HD2 General

Hello.
I cant run my HD2, it show rom screen and thats all. How to restore to default rom? I have hspl 3 ... It happend after mgldr install What i can do to rapair it??
Is it any way to back to stock rom now? I cant open bootloader, only hard reset. ROM cant load... Please help me...
NOW ALL IS WORKING SORRY IM STUPID AND THATS ALL xD TO CLOSE

Related

Pharos oiginal Rom WM6 Eng HELP

I everyone,
I was trying to intall a new rom in my Pharos but the computer crashed and the instalation was interrupted. Now Pharos doesn't conect, and when i try to install the rom again it says invalid vendor id or update error. I think is dead
Does anyone have the original Pharos Rom WM6 Eng ? or know where i can find? so i can try to save it.
Thanks
rom: 1.11.405.1
rom date: 01/29/08
radio version : 03.15.90
protocol : 4.1.13.59
maybe you can use this one : http://forum.xda-developers.com/showthread.php?t=394721
Thanks Teckynou, i have already tryed that on. Doesnt work, its the wm6.1 (update), i think i have to install again the original Rom in Eng. (and i dont find anywhere)...
have you tryed a hardreset?
http://www.hardreset.eu/htc_pharos_p3470_hard_reset_soft_reset_en.html
Yeap! didnt work....i really need help.
at_mix said:
Yeap! didnt work....i really need help.
Click to expand...
Click to collapse
If all else failes send it to HTC... and theyll repair it .. will probably charge you since you tried to flash (an unofficial) rom but its better than having a brick.
Maybe someone else has a better idea?
lots of luck to you!
Another Original ROM
http://forum.xda-developers.com/showthread.php?t=403957
What U mean by "DEAD"...?
Have U managed to have the tri-colors boot screen?
Tri-color Boot screeen is looked similar to this.....
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg
If not,...
Try the method below to get the Tri-color boot screen. Though it is for ELF, it usually works to all HTC devices. Surely..work on Pharos..
I recommend Hold down camera key => Press/Release Reset Button at the back => Release camera key after you have the tri-colour boot screen showed up.
http://wiki.xda-developers.com/index.php?pagename=Elf_Resets
Then you can flash an original ROM... Note it is OK that 'Active Sync' symbol show "NOT CONNECT".. U can still proceed with Flashing!!!!!
Let me know if it works this time.......
bita said:
Another Original ROM
http://forum.xda-developers.com/showthread.php?t=403957
What U mean by "DEAD"...?
Have U managed to have the tri-colors boot screen?
Click to expand...
Click to collapse
Hi Bita,
Yes, im able to enter the reboot (the tri-colors boot screen), the only problem is the rom i try to flash i get the ERROR vendor id or update error.
I'll try that original rom.
Thanks

HTC Magic don't boot up after reset

hi
i just reset to factory default in the settings. after that will the phone not boot up. It's just flashing the hero logo. And the PC can't connect to the phone no more(both in Windows 7 and Windows XP). The ROM are myhero 1.1.2, and works well in 2 months.
please, help me how do i fix it!
thank you in advance and sorry for the bad English.
hey did u find a fix i have the same problem!!
Same problem here myHero stucked after hard reset.
ROM myHero 2.5 , after hard reset , simply freezes on boot (exactly when the green androids apear). Cant use adb to flash it again cos it doesent find the devices. I dont know what to do my fone is bricked because I wanted to do a Hard reset!!!!!!!!!!!!!!!!
Unbelivable! Please someone help!!!
andre2pi said:
ROM myHero 2.5 , after hard reset , simply freezes on boot (exactly when the green androids apear). Cant use adb to flash it again cos it doesent find the devices. I dont know what to do my fone is bricked because I wanted to do a Hard reset!!!!!!!!!!!!!!!!
Unbelivable! Please someone help!!!
Click to expand...
Click to collapse
What makes you think that your phone is bricked?
If your phone was actually bricked then you would not be able to get into bootloader OR recovery. If this is not the case then you are not bricked.
I suggest to anyone having this issue to wipe your ext partition on your sdcard, clear and wipe your data, reflash your rom.
Why people don't perform nandroid backups really puzzle the hell out of me.

white HTC boot screen after ANDROID -> no reaction whatsoever

Hi XDA Devs,
I've managed to break my HD2.
I was in ANDROID and shut down the phone over A. since then:
It's stuck on the white boot screen with the HTC logo (without any numbers in the left low corner).
No usb connection, no further sign of hope.
Hard reset, battery out -> nothing seems to help.
Do you got an idea how to get my HD2 working?
Thank you in advance!
Max
HD2 was running on:
2.10 radio (Vodafone Germany)
Artemis 24
Get into the bootloader mode ! do a task 29 format ..once it is completed again get into the bootloader mode and then flash the rom u were using ! cheers
I've managed to get into the bootloader mode and perform task 29.
Right now I'm tryin to upload artemis 24 to my phone but its either stuck at 0% or somewhere between 35%-60%. never came further than that AND it always takes awefully long!
EDIT: now its always 0%. I'm flashing with SSPL_RUU.exe
Do you got an idea how I'm able to fix that?
Thanks
ok ..do one thing ..enter bootloader ..perform task 29 again ...then again bootloader ...change ur radio to 2.07.50. ...u will find this radio in the energy rom thread ..once u have flashed the radio ...enter bootloader again and flash the latest energy rom .:. forget abt the artemis rom for now ..do this and then tell me
yeah! thx, everything went just fine.
I get the feeling something was wrong about Artemis rom.
thanks very much!
Thats awesome ! ..good ! always use energy roms they are much more stable and much better and perfect in itself ,artemis is just like the stock rom and has its own benifits ! welcome anytime ! cheers
My HTC HD2 is not reacting when i touch the screen!!
Hi.... I have an HTC HD2... i have 3 months since i bought it... ever since the phone was working awsome... but like 3 weeks ago the phone started working really slow.. so i decided to do a factory reset to solve the problem... after the phone was rebooted it worked about 10 min perfectly fine.. then it locked as it usually dose (when its not in use).. but when i tried to unlock the phone,the screen was not reacting.. the problem is NOT that the screen dose not display.. the problem is that when i pass my finger throgh the screen to unlock,it dosnt work.. its like freezing... i tried to upgrade the ROM but it still gives me the same problem!!!
Is there a way i can fix this problem??? if there is i would really apreciate youre help!!! Thanks...

[Q] need help!!!! my htc hd2 stuck on bootloader!!

I need help please my htc is stuck in bootloader!! This is the first time i was flashing my phone.... And there is not custom rom yet installed its just the process of getting hspl.. The situation was i was connceting it to hspl and when it was connecting i accidentally disconnected it! Now its stuck on bootloader!! And it wont connect to active sync!! The spl is 2.10.000 and white part of the tri coulor saids usb. Now can someone please help me!!! I really like the phone and im trying not to lose it!! Please tell me if my phone is broken or not.. And if it isnt please let me know how i can fix it!!! Please need quick response!! I CANNOT ACCESS MY PHONE AT ALL ITS JUST IN BOOTLOADER!
... uhm i tried to flash it with stock rom..... using 2.13 stock rom.. and i went through the whole process. my phone went through the htc loading thing... and btw my phone cannot connect to active sync..... so i went through it and then nothing happened im still in the situation i was before... and then i tried flashing it using hspl and still it keeps saying error bad spl.... and right now my bootloader screen saids spl 2.10.000.. please someone help me... do i need to use a different spl??? cause i still cant access my phone.. i cant connect to active sync either..

[Q] I need help... please :S

Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume down and power on the phone and that should bring u into the bootscreen mode
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
Hi all
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
rikardo1979 said:
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
mariodna said:
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
Click to expand...
Click to collapse
rikardo1979 said:
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
Click to expand...
Click to collapse
:S Nothing....
not happened to anyone else?
my Hd2 is now a brick?
mariodna said:
not happened to anyone else?
my Hd2 is now a brick?
Click to expand...
Click to collapse
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
rikardo1979 said:
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
as far as i remember it was the volume down button to get into booloader.
silverwind said:
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
Click to expand...
Click to collapse
I don´t understand all...do you say me taht install android again??¿ i tried...with recovery mode, DAF mode and data2ext4.... but nothing....
Are you sure you're just downloading ROM's and using the same Clockworl for all? All ROM's have different partition layout requirements for Clockwork. Check out the ROM thread and look for something about the Clockwork partition size. I usually just Ctrl Find then look for 'CWM'.
If that's not the case, you may be downloading ROM's which need an Ext3/4 partition on the SD card. Do you have an Ext partition?
Well you have the partition, so the only thong it could be, quite possibly is the wrong Clockwork size. As far as I know, I think there's an included file in the TyphooN thread that has a CWM inside it. Download it, flash it via the .daf file, then go back in to recovery and flash the TyphooN .zip again.
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
Reading other posts I see you have tried everything, so I suggest you go back to the start, i.e install a Win 6.5 rom from HTC using the SD card method which will erase everything on your phone(including HSPL) and revert your phone back to factory status..
and then try again, use a Android NAND rom which does not required any ext/data2sd/apps2sd partition by default and see where u get with it.
yeah, u right. its volume down my bad sorry
it was a long night for me
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
Here's the CWM file you should be flashing if you're using TyphooN.
http://www.multiupload.com/5VH6M9XM8B
No need to restore to factory ROM etc. as even a Task 29 would be more useful and easier.
Thank you very much when i arrive to my home i try the options that you tell me.
Thank you again
No problem-o.
Don't forget, if I helped, don't forget the 'Thanks' button.
Curry curry curry
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
You're from India aren't you
rikardo1979 said:
yeah, u right. its volume down my bad sorry
it was a long night for me
Click to expand...
Click to collapse
as long as it was a good night, you are excused
ALL_XDA_MODS_R_C*NTS said:
You're from India aren't you
Click to expand...
Click to collapse
wrong, try again
Sorry i was working this days...
I think that i made good the partitions... but any romload compleate.... Recovery don´t run, when i install a DAF Rom the load stop in te first screen.....
And i can´t do the tricolor screen... the buttons are well...but the tricolor screen no....
Sorry could you try explain in better English? Maybe use a translator.

Categories

Resources