hello..
i know this is my first post, and i did used a search button...
could not find any threads about someone stupid like me..
i tried to flash my s200 with wm6 and failed, look`s like it was not unlocked eaven i have purchesed it as unlocked..
at first i get coloredbooter but after when i tried to flash older version back it started to blink on me..
i can not start it up, screan just start to flash and status LED also..
looks like it can not get to boot loader..
any ideas?
TNX
Ivan
When you tried to update to WM 6 what ROM did you used for the downgrade, the no vendor ROM ?
The exact name: RUU_Prophet_220734_2207114_024721_NVID ?
It started to blink after this first downgrade or after you upgraded to WM 6 ?
i have not dongrade it.. i just run wm6 image over existing and perfectly running one 5 series downloadad from here few months ago.. dont know the name...
after it hanght on bootloader, and then i start to read... LOL
i RTFM.. and saw steps...
i tried the downgrade when i was in position of colored bootloader with
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
then it was restart and hanght on OS load, then i have noticed that image file was not in MBs it was in Kbs looks like damaged image...
after i unpluged batery it hanged for good...
start blinking.. :-/
laser-interceptor said:
i tried the downgrade when i was in position of colored bootloader with
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
then it was restart and hanght on OS load, then i have noticed that image file was not in MBs it was in Kbs looks like damaged image...
after i unpluged batery it hanged for good...
start blinking.. :-/
Click to expand...
Click to collapse
You are aware of the fact that you are posting in the Prophet-section?
If that your point, because you own a Prophet, then I'm sorry to say that flashing your device with a Wizard RUU isn't a good move...
now when my phone wont start i know it was a bad idea.. :-(
i was just 2 slapy and 2 fast.. wanting wm6...
anyone can help?
BUMP !.. :-(
Try to enter bootloader: hold the camera button and soft reset.
If that works, try: http://wiki.xda-developers.com/index.php?pagename=Flash_From_Bootloader
hi all,
i have an htc p 3300, actually used to have... becasuse;
i have tried to upgrade to wm 6.0... no problem seems to appear for the first two days... but then, suddenly screen gone black... i have tired to reboot it but no way... i took the battery away for a while... then it worked... i downgraded to 5.0... but the same problem still exists... now the situation is; if i remove battery for a while, it works; both in bootloader, and normal wm 5.0... i uspl it, flash new rom... but the common things such as 260-270 errors etc... a few times i succeeded to flash new rom... it worked again.. but then screen goes black as if it was broken... it is freezing and getting fade to black...
any body could help me???? i've been working for 3 months.... i bought a new kaiser plus a new iphone... but i miss my arteMISS
hate to say it but in this situation I'm inclined to think that it is a hardware issue.
Sorry you have this issue. I have a service manual for my Wizard/Prodigy.
There may be a way for you to put your ppc into bootloader by using the buttons, and then reflash the rom.
I once had a malfunction flashing the rom and that fixed it. on mine it was [Camera +Reset+release camera] i don't know if that might work, but it is worth a try to put your phone into bootloader first. also, you should remove the battery and hold the power button for a few to make sure that the ram is completely wiped. Flash the official rom and see if that worx.
Good luck.
hi
My artemisis also dead. Afterhard reset it start the bootscreen and nothing als. What must i do ?
Please helo my. Thanks
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Before we start, you can ask him how his device has ended up like this, can't you?
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
Click to expand...
Click to collapse
Sir, you have forgotten your caps locked.
boxboy said:
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
Click to expand...
Click to collapse
Because you have stock SPL, you won't be able to install any custom ROM or any stock ROM not made for your region/SN.
boxboy said:
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
Click to expand...
Click to collapse
AFAIK, task29 is, also to be considered, a custom rom so it needs HSPL to be flashed. Are you sure you have followed the steps correctly?
boxboy said:
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
Click to expand...
Click to collapse
That is not a ROM, it's a radio. You need to flash HSPL to be able to change the splash screen (NRG Screen). HSPL should go like this: SPL 2.08.HSPL .
boxboy said:
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Microsoft is a corporation, Windows Phone is the OS .
One more thing, to be able to flash a LEOIMG from sd, the .nbh must be a rom that is compatible with your device (It will work if you get it from htc.com using the device's serial number)
I hope this helps. And I'm sorry if I am incorrect at something.
Good luck.
------------------------------------------------------------------------------------------------------------------------------------------------
To summarize it, you need to do either one of the following:
1- Install HSPL, and do what you want.
2- Go to HTC.com, download a rom using your Serial Number, rename file to .zip, extract the .nbh file, rename to LEOIMG.NBH [Capital letters], put onto sd card and insert into phone, boot up device while holding volume down ONLY, and make sure splash is removed and you're back to the "htc" stock, then send to repair [why?].
posting teh same post in multiple sub forums is considered rude
http://forum.xda-developers.com/showthread.php?t=1440265
Yeah, HSPL is needed for flashing pretty much everything. One thing you could do would be to flash a stock ROM from your SD card (just google it I CBA to provide links and stuff) which would reset everything to factory WinMo (including SPL to SPL3.03 [assuming you flash the latest ROM 3.14]) and from here it would basically be a fresh start. Probably the safest route without HSPL
Hi.
Thank you for your replies...
Let me tell u guys if I forgot to say earlier. The mobile phone is not letting flash any of the Hspl... be q series, 2 series or 3.series... all the times it says error 0000006 and 000000010 etc... a couple out of hundreds it did let flash but then it doesn't let me flash the factory rom fom HTC.
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
OK,
My final.outcome.
This phone let's me flash the hspl but it doesn't let me flush any roms including the original HTC factory rom.
I can also perform the task 29. Etc but still the NRG screen is still there.
I would like to know that if I flash the original Split and send it HTC, will be repairable for free? Sure? Even with the NRG.
now i think the only option available to you is jtagging the device which may permanently void the warranty !!
it had happened with me once, but somehow it got solved !
i used to randomly install clk, magldr, radios, hspl etc multiple times !
it used to get stuck while installing and then i used to remove the battery and try again !!
somehow it started ! !!
STRANGE DEVICE !!
Yeap its a real problem!!
Now , It will not let me change the hspl to spl whatsoever I do.
I would like your suggestions
I bought this brick for £50 and I can return it to get my money back. Has any used jtagging and does it 100% work?. The thing is if I do used jtagging, and if it doesn't work ,then I can,t return it!. How much does it cost and is it worth it?
jtagging will solve your problem !!
they remove the motherboard of the device and flash the os into the motherboard directly through a device named riff box !!
refer this video for more info !!
http://www.youtube.com/watch?v=zElsUERTzOU
but pls do not try this at home ! !!
just contact a local repair shop to jtag your device !!
also u can contact these guys from the video !!
good luck ! !!
boxboy said:
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
Click to expand...
Click to collapse
Check that the micro USB connection isn't "wobbly".
I had a TMOUS HD2 and never had any issues. Then, I sold it and got a Telstra HD2 and had big issues getting ROMs installed until I realized that the connection at the phone was a little weak. I can't send any updates to WP7 via cab sender unless the phone is in a certain position to keep the connection from breaking.
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Don't worry ... you can give the life to your phone back... it shows fail bcus u have 2.08.0000.. so it means u Sud have 2.08 v hspl.. so try flashing hspl by getting into bootloader(3 colour) by pressing volume down + power Then flash hspl.. but remember select 2.08v.. then again after flashing hold volume down + power.. bootlooder.. then flash magdlr 1.13 ... now the phone will boot into a black screen with written mangdlr.. wen the black screen magdlr screen comes then press power off for 5mintzz.. follow the guide to flash.. there is a stick thread in NAND DEVELOP... U can get the windows version back to your phone to get the warranty...
Sent from my HTC HD2 using Tapatalk
Ok ,, some good new at last ..
I have used the HSPL4 to change my 3.03hspl to 3.030000 spl...
Success, as when i go to the tri colour screen it says spl and no hint of hspl...
Bad news, is that i still cant get the rom flashing,, as it gets stuff at some point and mostly at 99%.. Have tried both ways through SD (leoimg) and through USB.
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
boxboy said:
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
Click to expand...
Click to collapse
did you try to flash just a splashscreen as i suggested in your other thread? (they can be flashed alone, no need for a whole rom, , just like radios)
if you can get a stock splashscreen on there you are sorted.
Maybe try to download the original Software from HTC.
With you serial number you can get the latest windows for this phone.
Flash the Software you get from HTC.
If this is working ok you can try to install any Android ROM.
Read at first this
http://forum.xda-developers.com/showthread.php?t=905841
Try to understand and follow the steps..
But if you have even no luck with original Windows soft. You will also (maybe) have a lot of probs. with Android..
Thank you guys for all your help..
I have flashed andriod on several phones some time ago and I actually forgot the right steps to follow.
But this phone is unique is not letting me finish.
After following all the right steps, i wasnt able to install a rom succesfully even after installing the HSPL... and I am also not able to install the factory rom from htc on either the hspl or spl settings.
But i now got rid of the NRG screen and I have also installed the spl 3.03.. When you on the phone, it displays software upgrade failed..
So I have now sent the mobile to HTC as it is under warranty. I will then re-flash andriod following the right steps and see what happens!
Thanks again!
My mobile came back from HTC with a week.. Looks like a brand new one!
In the letter it says the replaced IMEI, PCBA, FL BD, W/O_ REGIONAL_ID, LEO
WOW
GREAT PHONE... ITS MUCH FASTER THAN THE PREVIOUS ONE FOR SOME REASONS
hi ppl sorry post for hellp , but my hd get stop on boot loader it dont pass the smart mobility logo , and loop.
it starts to do this by it self, 1ª it look like dont charge, them gets on loop.
it on stock rom, i never update im. it was original.
1ª i start for update im to the last stock rom RUU_BlackStone_HTC_PTG_1.56.410.0_Radio_52.62.25.34_1.13.25.24_Ship
it did it ok and it get on loop again.
2ª i did HSPLWrapper_Blackstone_156OliNex , so i can use other roms to test
3ª install 1ª Blackstone Premium EDGE V4.3.1 and the same then Blackstone Swift EDGE V4.3.1
and i have the same , the only difference its the boot logo now i have htc smart mibility but it get stopped
any 1 have any idea how can i solve the problem.
at this time i think its an hardware problem but if any 1 have any idea, i will tray any thing, because its not on warranty i will tray any thing first .
sorry for my bad English and thanks in advance.
Edit:
Problem solved
like i think before the flash was with any kind of corruption i think?!!!
i have tray use task 29, but it wasn't working, so i take a last chance option.
i use HSPLWrapper_Blackstone_156OliNex as flasher but instead of 513k ruu_signed.nbh that came with, i use blackSTONEhengeHyPerSlim_4_8 as image to flash, i use this 1 because its short and have all flash "sections" boot , os , radio etc etc.
note the HSPLWrapper_Blackstone_156OliNex i was already flashed , i was the only way i can get coked roms flashed.
Now my blackstone its alive again, i have a little understanding on programming and hardware i did it on my one risk but it work and its a simple trick, and maby hellp any 1 ho have the loop like i was , and only can get in SPL mode.
my Touch HD it was virgin i was never bin flashed or any other kind of change
hello,
yesterday i was booting up my phone but it stucks at the green HTC logo and then i've performed a hard reset but it had no succes it still stucks at the HTC logo. I've searched on google for the problem but nothing of all the answers worked for me. last night i've let the battery out for 8 hours and when i put it back in it boots into de welcome screen of windows mobile 6.5 but there it freezes again so i pulled out the battery and when i rebooted the phone it stucks again at the HTC logo. I've tried to install the newest rom from the HTC site but it still stucks at the HTC screen
i don't have hspl so i cant try different roms
i hope someone can help me
sorry about my english it sucks
technobram said:
hello,
yesterday i was booting up my phone but it stucks at the green HTC logo and then i've performed a hard reset but it had no succes it still stucks at the HTC logo. I've searched on google for the problem but nothing of all the answers worked for me. last night i've let the battery out for 8 hours and when i put it back in it boots into de welcome screen of windows mobile 6.5 but there it freezes again so i pulled out the battery and when i rebooted the phone it stucks again at the HTC logo. I've tried to install the newest rom from the HTC site but it still stucks at the HTC screen
i don't have hspl so i cant try different roms
i hope someone can help me
sorry about my english it sucks
Click to expand...
Click to collapse
You should try to put in a freezer(in a plastic bag, without battery) for 15-20 minutes and then try to flash your wm ROM and see what happens...
ive installed android nand on it and it works until it suddenly freezes
so maybe it is an overheating problem??
technobram said:
ive installed android nand on it and it works until it suddenly freezes
so maybe it is an overheating problem??
Click to expand...
Click to collapse
It looks like that to me!
Have you tried not using the latest HTC ROM but the previous version. Could be a bug in the ROM or possibly bad blocks causing a problem. I would suggest a task 29 wipe before installing the ROM. Can be found easily in the forum. I had a similar problem that fixed it for me. On android now though.
Maybe increase the cache partition and the ROM partition to allow for possible bad blocks that can cause problems especially in nand. Usually allowing an extra 5mb on each partition should do it. If you dont know how find the hd2 toolkit as that will be the easiest way. All on the forum. Hope this helps
Sent from my HTC HD2 using xda app-developers app
bobby1503 said:
Have you tried not using the latest HTC ROM but the previous version. Could be a bug in the ROM or possibly bad blocks causing a problem. I would suggest a task 29 wipe before installing the ROM. Can be found easily in the forum. I had a similar problem that fixed it for me. On android now though.
Maybe increase the cache partition and the ROM partition to allow for possible bad blocks that can cause problems especially in nand. Usually allowing an extra 5mb on each partition should do it. If you dont know how find the hd2 toolkit as that will be the easiest way. All on the forum. Hope this helps
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
oke ive installed hspl and if i install a different rom it still freezes at the htc logo so tommorow im going to try installing stock rom v1.66
but now i'm going to sleep
(i live in the netherlands so its a different time)
technobram said:
oke ive installed hspl and if i install a different rom it still freezes at the htc logo so tommorow im going to try installing stock rom v1.66
but now i'm going to sleep
(i live in the netherlands so its a different time)
Click to expand...
Click to collapse
Putting in the original romantic should fix this.. Just sounds like the partitions are not big enough or the ROMS could have issues. When installing the original rom it should clear the whole phone and boot up fine. Might take a while on first boot.
Sent from my HTC HD2 using xda app-developers app
oke this is weird if i wanna install any stock rom it says:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
update terminate
UPDATE FAIL
what should i do??
technobram said:
oke this is weird if i wanna install any stock rom it says:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
update terminate
UPDATE FAIL
what should i do??
Click to expand...
Click to collapse
This looks like a wrong radio flash
bib*oops said:
This looks like a wrong radio flash
Click to expand...
Click to collapse
oke thanks but what should i do now?
right now i can't flash any stock rom
technobram said:
oke thanks but what should i do now?
right now i can't flash any stock rom
Click to expand...
Click to collapse
Unfortunately I can't suggest you a solution, I'm looking for a way out of this too...
have u tried booting into bootloader?
?!
rprevis said:
have u tried booting into bootloader?
Click to expand...
Click to collapse
Have you read previous posts, at least?
sorry for the late response but ive tried all the solutions but they all did not worked
i have the exactly same problem...
and i dunno what todo now...
PS. Seems that i cant flash anything in the bootloader mode...
oke i've discovered that it is a vodafone branded phone.
so then i've tried to put the vodafone romm on it.
so first i performed a task 29.
and then i've replaced hardspl with the original spl (v 3.03.0000)
but after that it wont boot anymore the screen just stays black i can't even boot into the bootloader
it just makes a weird clicking noise and the scren stays black
does anyone knows a solution for this
technobram said:
oke i've discovered that it is a vodafone branded phone.
so then i've tried to put the vodafone romm on it.
so first i performed a task 29.
and then i've replaced hardspl with the original spl (v 3.03.0000)
but after that it wont boot anymore the screen just stays black i can't even boot into the bootloader
it just makes a weird clicking noise and the scren stays black
does anyone knows a solution for this
Click to expand...
Click to collapse
Are you sure it was a Vodafone HD2? Does it have a red end/power button and a green call button? If it does then that is a TMOUS that does not have the T-Mobile logo on it for some reason and you have radio bricked the device. The fact that you can not boot into bootloader means you are bricked period even if it is not a TMOUS HD2. Now the only fix for your device is to have it JTAGed or a new PCB board put in the device. Now if you can not find someone locally or in your region of the worl that can JTAG your device PM me and I can refer you to someone that can and is very good at it.
i live in the netherlands si it's very hard for me to find someone that can perform a jtag
Same problem for me
I have exactly the same problem.. :crying:
Try this just for grins.
Take out the battery and MAKE SURE all of the pins on the back of the device are hitting the battery where they are supposed to and not bent or anything.
I don't see how doing a task29 and changing the SPL would brick the phone if it DID brick,it should have done it after the ROM or Radio flash.
If you did things in this order ROM -> reboot -> task29 -> reboot -> SPL, then you should still be able to access bootloader.
Not sure why you'd flash a ROM then task29 though.
Anyways, if you flashed the wrong ROM from SD then yeah, you are bricked (if that was the last thing you did) but try the battery thing.