[Q] I need help... please :S - HD2 Android Q&A, Help & Troubleshooting and Genera

Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do

Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume down and power on the phone and that should bring u into the bootscreen mode
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
Hi all
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse

rikardo1979 said:
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu

so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
mariodna said:
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
Click to expand...
Click to collapse

rikardo1979 said:
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
Click to expand...
Click to collapse
:S Nothing....

not happened to anyone else?
my Hd2 is now a brick?

mariodna said:
not happened to anyone else?
my Hd2 is now a brick?
Click to expand...
Click to collapse
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck

rikardo1979 said:
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
as far as i remember it was the volume down button to get into booloader.

silverwind said:
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
Click to expand...
Click to collapse
I don´t understand all...do you say me taht install android again??¿ i tried...with recovery mode, DAF mode and data2ext4.... but nothing....

Are you sure you're just downloading ROM's and using the same Clockworl for all? All ROM's have different partition layout requirements for Clockwork. Check out the ROM thread and look for something about the Clockwork partition size. I usually just Ctrl Find then look for 'CWM'.
If that's not the case, you may be downloading ROM's which need an Ext3/4 partition on the SD card. Do you have an Ext partition?

Well you have the partition, so the only thong it could be, quite possibly is the wrong Clockwork size. As far as I know, I think there's an included file in the TyphooN thread that has a CWM inside it. Download it, flash it via the .daf file, then go back in to recovery and flash the TyphooN .zip again.

mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
Reading other posts I see you have tried everything, so I suggest you go back to the start, i.e install a Win 6.5 rom from HTC using the SD card method which will erase everything on your phone(including HSPL) and revert your phone back to factory status..
and then try again, use a Android NAND rom which does not required any ext/data2sd/apps2sd partition by default and see where u get with it.

yeah, u right. its volume down my bad sorry
it was a long night for me
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse

Here's the CWM file you should be flashing if you're using TyphooN.
http://www.multiupload.com/5VH6M9XM8B
No need to restore to factory ROM etc. as even a Task 29 would be more useful and easier.

Thank you very much when i arrive to my home i try the options that you tell me.
Thank you again

No problem-o.
Don't forget, if I helped, don't forget the 'Thanks' button.

Curry curry curry
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
You're from India aren't you

rikardo1979 said:
yeah, u right. its volume down my bad sorry
it was a long night for me
Click to expand...
Click to collapse
as long as it was a good night, you are excused
ALL_XDA_MODS_R_C*NTS said:
You're from India aren't you
Click to expand...
Click to collapse
wrong, try again

Sorry i was working this days...
I think that i made good the partitions... but any romload compleate.... Recovery don´t run, when i install a DAF Rom the load stop in te first screen.....
And i can´t do the tricolor screen... the buttons are well...but the tricolor screen no....

Sorry could you try explain in better English? Maybe use a translator.

Related

[Q] Forcing a format of HD2?

Hello!
aaand YES! I screwed my HD2 up, so it cant boot... at all...! :'(
Is there any way i can force a complete format and reinstall the stock 6.5 windows?
(Long story short: installed custom radio, chucky rom and android, worked fine, wanted to install WP7, missed a step, messed it up, and not, it shows the old Chucky loading screen, and then goes into a menu that asks me what i want to do with the device, but i cant select the different options. The phone wont 'activesync' because it wont start up). Anything i can do?
ANY help MUCH appreciatet! willing to do anything to get it to work again, since i dont really want to return to my ooold Sony Ericsson W880i -.-
Thank you all in advance!
Regards, panxter
panxter said:
and then goes into a menu that asks me what i want to do with the device, but i cant select the different options.
Click to expand...
Click to collapse
do you mean the magldr screen? vol up and down is scroll up and down, , send to select
choose usb flashing, flash your rom. (nand android or wp7)
samsamuel said:
do you mean the magldr screen? vol up and down is scroll up and down, , send to select
choose usb flashing, flash your rom. (nand android or wp7)
Click to expand...
Click to collapse
Ah, cool mate.. Only problem is: When i select USB-flashing it goes:
" USB Flasher mode
wait USB..."
And my computer fails to set it up :b
panxter said:
Ah, cool mate.. Only problem is: When i select USB-flashing it goes:
" USB Flasher mode
wait USB..."
And my computer fails to set it up :b
Click to expand...
Click to collapse
Oh nvm, got it to work now!
Thank you SO much mate! You made my day... or night, even!
heh, no prob
Just make sure when you're trying to flash any other ROM's just disable USB connections in ActiveSync before you flash as it'll say "USB init failed" otherwise.
Cheers mate!
Now just a minor question, then i'll shut up xD
I just realised that i flashed the new WP7-ROM without the SD-card, which means that it wont register the card now.. (this ROM: http://forum.xda-developers.com/showthread.php?t=953078)
Can i just re-flash it? or what should I do?
Yeah just flash it again using MALGDR. With the SD card in this time.

[Q] Magldr 1.13 CWM 1.3 Help

Hey Guys I Recently tried to flash Clockwork mod so i could get this rom http://forum.xda-developers.com/showthread.php?t=1036948&page=4
Did everything right but now my phone is stuck on the magldr boot screen and my old android rom wont load:[ and now my phone wont turn on unless its connected to the usb:[ please help it wont let me boot ad sd It says SD Kernel Open Failed and whenever i go down to AD Recovery it loads up but my phone turns off after Load Done! 123456, How can i get this working please Help!
Stealthy_Stoner said:
Hey Guys I Recently tried to flash Clockwork mod so i could get this rom http://forum.xda-developers.com/showthread.php?t=1036948&page=4
Did everything right but now my phone is stuck on the magldr boot screen and my old android rom wont load:[ and now my phone wont turn on unless its connected to the usb:[ please help it wont let me boot ad sd It says SD Kernel Open Failed and whenever i go down to AD Recovery it loads up but my phone turns off after Load Done! 123456, How can i get this working please Help!
Click to expand...
Click to collapse
ok, 1. theres a quetions sub thread for you to post questions in, this is not it.
2. thers a magldr and clokwork thread you could post in, why dont you?
3. your battery doesnt have any juice, so you can either get a standalone battery charger to charge it, or do like i did and cut a usb cable, attach the +5 and negative terminals to teh battery for 5 minutes so it has juice.
and 4. it sounds like you didnt resize your partitions when you flashed the new rom, i cant believe how many newbes overlook that step. specifically it sounds like your boot partition is to small, but thats just a guess.
i can guarantee you this thread will get moved to the questions & answers thread, so dont be suprised when you dont see it here anymore.
Sorry Bro Im A Newb lol But Yeah i guess I skipped that step and i tried to reflash my old Nand Rom and it gets stuck on the DFT Screen And turns off :/ My Hd2 still wont turn on unless its connected to usb
Okay so i managed to get my old rom back up but all my apps and settings were erased:[ how can i get my clockwork mod back up to work?
Stealthy_Stoner said:
Okay so i managed to get my old rom back up but all my apps and settings were erased:[ how can i get my clockwork mod back up to work?
Click to expand...
Click to collapse
You have to boot into MAGLDR by holding the power button down while your HD2 powers on. Scroll down to option #8 AD Recovery and press send thos will boot CWM.
T-Macgnolia said:
You have to boot into MAGLDR by holding the power button down while your HD2 powers on. Scroll down to option #8 AD Recovery and press send thos will boot CWM.
Click to expand...
Click to collapse
How do I partition or whatever ? Im Still trying to get the rom from my original post? Please Help Me:/
Stealthy_Stoner said:
How do I partition or whatever ? Im Still trying to get the rom from my original post? Please Help Me:/
Click to expand...
Click to collapse
Oh and i just tried that but it said theres no boot sources? so im guessing when i flashed my old rom back on it ****ed it up? so do i have to reflash CWM? And if so how do i do the partition so i can get that rom up there? :3 thanks
I would like to piggy back on this problem. When I press option 8 my HD2 does not go into CWM. It hangs at "Load done1 E1 Fatal hit" Has anyone else come across this and knows the fix so I can get into CWM? Thanks

[Q] Is there has anyway to delete ‘initrd.gz’ file?

Hi. Guys. I'm a Chinese fan of HD2. I love this Mobile phone so much!
But. There has something wrong with my HD2's hardware. I was wonder if there has anybody can give me a Working advice. Here is the Problem:
That Power button and down Volume button doesn't work anymore.
The another buttons are working good.
My HD2:
HSPL:2.0.8
MAGLDR 1.13
Android 2.3.5 with Sense 3.5 product by R3Mix(Runny offical 5.1) Rooted
Beccause the buttons reason. I can not use the MAGLDR Menu.
So I've figured out a way.
Make Android booting faiule. That I can use the Menu.
How to delete the boot files.
Thanks
i like your galaxy rom very much~ happy to see you here
---------- Post added at 10:48 AM ---------- Previous post was at 10:47 AM ----------
a suggestion is that to do a task 29 and you can see the menu
So happy to see you here too. But my HD2's Down Volume button doesn't work! I can not use the Task 29
by the way. I hope you had the best experience with my Galaxy ROM
and I only Posted my Galaxy ROM in China's bbs Website. Where did you get it?
Are you Chinese? 呵呵
type something with Terminal.
Just Like Rom Manager Flash Recovery.
I just don't know how.
Can anybody please help me.
Thanks very much.
U have to repair buttons. Initrd.gz file has nothing to do with buttons. WHen buttons fail u have to replace them.
PS: Pls dont go off topic with posts if its not problem
No. I mean if I deleted initrd.gz file. MAGLDR will not Booting successful. Instead of returning MAGLDR Menu. I had the another HD2. And I've done it on my another HD2. so I could use the up Volume button to choice the MAGLDR options (Because Volume Down button is not working anymore)
ALL I WANNA DO IS TRYING TO OPEN THE MAGLDR OPTION 'Always Boot Menu' TO YES.
So Please help me.
or delete zImage.
Thank you for your advice.
Sorry. I am not good at English. I can't understand
' Pls dont go off topic with posts if its not problem '
Thank you very much.
ChunD.K said:
Thank you for your advice.
Sorry. I am not good at English. I can't understand
' Pls dont go off topic with posts if its not problem '
Thank you very much.
Click to expand...
Click to collapse
不要去远离书面问题 I hope its good i used google translate.
U cannot delete that file. That is kernel file.But anyway it has nothing to do with buttons or magldr.
Thank you very much.
So SAD.
Just give it up yet.
So nice of you.^_-
Did you tried to enter original bootloader ? ( 4 coloured screen)
你试图进入原来的引导装载程序? (4彩色屏幕)
Cjovecje! said:
Did you tried to enter original bootloader ? ( 4 coloured screen)
你试图进入原来的引导装载程序? (4彩色屏幕)
Click to expand...
Click to collapse
No. I want to. But I couldn't. Because The Volume Down is not working.
You had another way to enter Color Screen?
ChunD.K said:
No. I want to. But I couldn't. Because The Volume Down is not working.
You had another way to enter Color Screen?
Click to expand...
Click to collapse
No there is no other way.
没有,有没有其他办法
But anyway it will not get you buttons back
但无论如何,它将得不到你的按钮
Did you spilled water on your phone ?
你水洒在您的手机 ?
Using translate is hard xD
http://forum.xda-developers.com/showthread.php?t=1419733
this might work, a touch CWM. but it's not ready yet
Crap. I made a reflection in My another HD2's touch screen. but unfortunately. It still working. Why would be like that.
I mean it's working verygood
I already flashed it. But I can't enter the AD RECOVERY option.
Cjovecje! said:
No there is no other way.
没有,有没有其他办法
But anyway it will not get you buttons back
但无论如何,它将得不到你的按钮
Did you spilled water on your phone ?
你水洒在您的手机 ?
Using translate is hard xD
Click to expand...
Click to collapse
No. It's just like somebody get sick. I don't even know What I've done before.
囧
Cjovecje! said:
No there is no other way.
没有,有没有其他办法
But anyway it will not get you buttons back
但无论如何,它将得不到你的按钮
Did you spilled water on your phone ?
你水洒在您的手机 ?
Using translate is hard xD
Click to expand...
Click to collapse
Finally. I use the ADB tool completed my wish!
First. mount the yaffs2 partition while Android is running.
Then. Delete the boot files.
When I reboot phone. MAGLDR can not booting Android successful from NAND anymore.
Instead of backing the boot Menu
^_-

damged volume no up/down

im stocked with this situatin thank god with a nice energizer rom 3.5
where phone can load only magdlr and of corse cant navigate the menu.
1) there is any way to switch trough adb or file explorer or terminal emulator the menu 1 selection so that become ad recover????????
so i can access my recover and load other roms?
2) there is any way i can load other android roms installing them trough sd card? or replacing folders and files into internal card?
3) there is any way to load without bootloader clk instead of magdlr so i can use a touch recovery?
thanx for your help
htchd2fix said:
im stocked with this situatin thank god with a nice energizer rom 3.5
where phone can load only magdlr and of corse cant navigate the menu.
1) there is any way to switch trough adb or file explorer or terminal emulator the menu 1 selection so that become ad recover????????
so i can access my recover and load other roms?
2) there is any way i can load other android roms installing them trough sd card? or replacing folders and files into internal card?
3) there is any way to load without bootloader clk instead of magdlr so i can use a touch recovery?
thanx for your help
Click to expand...
Click to collapse
???????anybody
htchd2fix said:
1) there is any way to switch trough adb or file explorer or terminal emulator the menu 1 selection so that become ad recover????????
Click to expand...
Click to collapse
no
2) there is any way i can load other android roms installing them trough sd card? or replacing folders and files into internal card?
Click to expand...
Click to collapse
not as your phone is now
3) there is any way to load without bootloader clk instead of magdlr so i can use a touch recovery?
Click to expand...
Click to collapse
no, needs bootloader, bootloader needs voldown.
samsamuel said:
nonot as your phone is nowno, needs bootloader, bootloader needs voldown.
Click to expand...
Click to collapse
Never mind
Nigeldg said:
Actually, the bootloader doesn't need volume down: see this post. However, having never used cLK before I don't know whether or not the volume buttons are needed in here. If not, then it is possible to flash a new ROM.
Click to expand...
Click to collapse
Thanx,
i didnt think about reset....but are you sure i dont still neeed vol down??????
once i change to clk with a touch screen recovery i can do almost everything from there but i need to get to the 3 color screen...
htchd2fix said:
Thanx,
i didnt think about reset....but are you sure i dont still neeed vol down??????
once i change to clk with a touch screen recovery i can do almost everything from there but i need to get to the 3 color screen...
Click to expand...
Click to collapse
.............................
Nigeldg said:
Actually, the bootloader doesn't need volume down: see this post. However, having never used cLK before I don't know whether or not the volume buttons are needed in here. If not, then it is possible to flash a new ROM.
Click to expand...
Click to collapse
heh, go re-read the post you linked, , , ,what are the first three words?
hint
Hold Volume Down. Press and hold Reset until you see the BootLoader screen. Reset is the hidden button under the battery cover, lower left side below the SD card slot. You need a plastic or wooden stylus (toothpick will work). DON'T use a pencil, the graphite can get into the button and short it.
Click to expand...
Click to collapse
handy for a broken POWER button, but no use to volume button issues.
not to mention that he is asking to flash from sd in bootloader, and of course, even if you DO get into bootloader, you need to press the vol button to start the flash.
(Not like you to make a mistake, you're normally bang on the money, , , bad day? )
Hey guys,
I'm sorry I can't help or offer any solution, but reading again about a volume button problem just makes me confident that we need to have an option to boot into SPL from clk or magldr.
If I remember correctly, in WM 6.x we could do it using a little executable called "Enterbootloader.exe".
To tell you the truth I've tried ida-ing that *.exe, but I don't have the skills to make something out of it... maybe someone else could give it a try(?).
Nevertheless in the newer version of clk I added an option to navigate through the menu using fastboot commands (simulating volume keys, green button and back button).
Regards!
samsamuel said:
heh, go re-read the post you linked, , , ,what are the first three words?
hint
handy for a broken POWER button, but no use to volume button issues.
not to mention that he is asking to flash from sd in bootloader, and of course, even if you DO get into bootloader, you need to press the vol button to start the flash.
(Not like you to make a mistake, you're normally bang on the money, , , bad day? )
Click to expand...
Click to collapse
Haha actually a fairly good day, got some decent GCSE results for the first few things I've done. I guess when I posted that was before I got the results and I was, shall we say, bricking it (although not talking about phones here ) and probably not really thinking. Anyway, @OP sorry about that, I really dunno why I linked that without reading it properly but meh, I guess no harm done if you didn't flash anything yet (aside from maybe getting your hopes up slightly )
Nigeldg said:
Haha actually a fairly good day, got some decent GCSE results
Click to expand...
Click to collapse
Hah, makes sense your mind may be slightly occupied.
Good stuff, grats.
thanx friends.
unfortunally you still need vol down to skip magdlr menu....and boot into tricolor screen.
i guess im stocked with this rom unless i can short vol down mecaniclly i mean from hardware
insert battery and power up then remove short...
kokotas said:
Hey guys,
I'm sorry I can't help or offer any solution, but reading again about a volume button problem just makes me confident that we need to have an option to boot into SPL from clk or magldr.
If I remember correctly, in WM 6.x we could do it using a little executable called "Enterbootloader.exe".
To tell you the truth I've tried ida-ing that *.exe, but I don't have the skills to make something out of it... maybe someone else could give it a try(?).
Nevertheless in the newer version of clk I added an option to navigate through the menu using fastboot commands (simulating volume keys, green button and back button).
Regards!
Click to expand...
Click to collapse
I think is going to get stocked as many other apk like fastboot or reboot....they work but when phone reboot it will get into magdler menu not bypassing.
Go here and buy a new flex ribbon:
http://www.ebay.co.uk/itm/320935344...AX:IT&_trksid=p3984.m1438.l2649#ht_630wt_1139
Go here for a comprehensive video guide to strip down your phone and replace ribbon:
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
It looks daunting but with care and patience, it is relatively simple.
Good luck.
uphall said:
Go here and buy a new flex ribbon:
http://www.ebay.co.uk/itm/320935344...AX:IT&_trksid=p3984.m1438.l2649#ht_630wt_1139
Go here for a comprehensive video guide to strip down your phone and replace ribbon:
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
It looks daunting but with care and patience, it is relatively simple.
Good luck.
Click to expand...
Click to collapse
Thanx,
but not for me....
thats exactly why my phone is in this state right now.....

[Q]Stuck in "smart mobile"(Edit3.5)HELP REALLY NEEDED.

Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone

Categories

Resources