Database Users

uh oh [HELP PLEASE]

sorry for the caps.
btw hello everyone
well lets just get to my problem.
i installed the touch it program rom thingy or whatever to my phone
and now im trying to restore it back to its original settings...
the only reason im doing that is because i cant connect the phone to the usb anymore. it WONT connect.
so im trying to restore it.
please help!
thanks!
or can someone just tell me how to reconnect it to my computer please?
i've tried different ports on the computer
and restarted it
but nothing, so please help me restore to factory settings or be able to use windows mobile device center
thanks!

maybe activesync didn't install properly when you flashed it..
or.. you should try the activesync uninstall/reinstall trick..
or a corrupt system file and you just have to hard reset the phone..
hmm..... good question

hard reset is when you press the clear storage right? or when u take out the battery while its still running??
well even if those arent hard resets i've tried them and none work
=[

A hard reset is preformed as follows:
-Hold down the two softkeys on the front of the device (the ones above the Windows logo and the OK button)
-Press the reset button using the stylus, which you can find below the volume adjuster on the left hand side of the device
-Release the stylus, but keep the softkeys held down
-You will see a warning screen
-Press the green send key on the left - the one with the phone icon on it to confirm the reset.
After that it will take a little while longer to start up the phone.
Btw if you by "original settings" mean restoring your official ROM a hard reset won´t do. You will need to flash the official ROM to go back if I´m not mistaken.

thanks for the info!

hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore

goodtilltomorrow said:
hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore
Click to expand...
Click to collapse
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?

knrubar said:
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?
Click to expand...
Click to collapse
Are you just trying to go back to the stock ROM becasue of the AS problem? Did you try a reinstall? After you uninstall before reinstalling AS go into your program files on the PC and delete the activesync folder.
If you HARDSPL'ed you need a STOCK ROM without the nbh. file. Thats why its kicking back to TOUCH.
Good Luck

Cincular 8525 stuck in Bootloader

I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?

Zulu137 said:
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Click to expand...
Click to collapse
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help

Asfarizal said:
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Click to expand...
Click to collapse
Manage to solve the problem ...thanks WIKI !!
Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus
Then Flash to any ROM you want !!

Thanks .... But
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.

1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......

Thank You
I will follow the instructions you gave and try to get it going this weekend.
Thank you so much for your time

Zulu137 said:
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
Click to expand...
Click to collapse
Looks like you've got a lot of reading to do, and a problem to sort out. Firstly a couple of answers...
Schaps is a Rom Cooking guru (makes custom versions of WM5, WM6 etc). When you get your phone sorted out I'd recommend trying one of his roms.
Hard SPL. The SPL is part of the bootloader which effectively dictates how a rom is flashed and what roms can be flashed. HardSPL is a custom version of this which allows you to flash any rom from any carrier. It also protects against a bad flash in many cases. It is recommended before you try flashing any new roms or radio roms. Use Hard-SPL-V7 at the bottom of the first post here.
The Rom upgrading software is contained in any of the cooked or carrier supplied roms. It is normally a .zip file which cotains 2 files: xxxxxRUU.exe and RUU_signed.nbh. You run the .exe file from your PC when connected to your phone via USB. More details of how to do this are in MrVanx's guides. Also other resources here.
Now to try to sort your phone out...
What is displayed on your screen when in bootloader mode? It should be something like this:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro (This is HardSPL V7)
If you don't have an Olipro SPL then you need to get HardSPL onto your phone. If you haven't done any upgrading and have had the phone from new then I guess you don't have hardSPL.
Now you need to fix your USB Malfunctioning problem. I can't help too much here except to suggest trying a different cable, different USB port or different PC. Also, if you are running Vista try an XP maxhine. When you connect to the PC does your phone show Serial or USB on the screen? If you can't get a USB connection, all is not lost - you can re-flash your rom using an SD card, method here.
There is a thread about un-bricking phones which may help.
There are various diagnostic tools (which can also screw your phone if used incorrectly). The favourite of these is MTTY but you need a USB connection to use this.
If your phone is in warranty I'd recommend getting your supplier to sort it out, but if not I'd try to re-flash an ORIGINAL supplier rom (Cingular I guess). You can get links to the official supplier roms here.
I think (might be wrong) that sometimes when stuck in bootloader you need to flash an official rom, not a cooked one to recover your phone - then you can run HardSPL and then flash cooked roms again.

Cingular 8525 stuck in bootloader
Thanks for the reply ... lots of great input.
Now to answer some of your questions.
1) When I power up the phone (only pushing the power button ) it goes straight into the bootloader screen without pushing any other buttons, and it displays
HERM100
IPL-1.01
HERM100
SPL-1.06
Then at the bottom in the white bar it says "Serial"
The only way that i have found to power it down again is to remove the battery, there is no response from any single buttons after it is in bootloader
the soft reset and hard reset work but it just goes right back to the bootloader screen after.
2) The USB malfunction. This only started after the phone "crashed" and before that it worked great ... well i only used it to sync up to my work pc for the contacts and to get pictures onto my hard drive.
all the PC's that i use are running XP. I have tried my home PC and my Laptop
and the work PC and all of them have their own cables and they all say the same thing ... "the USB device is malfunctioning"
I am sure that when i get the phone going again the USB will start to function again.
3) Phone warranty ... I bought the phone off e-bay from a store in new york about 10 months ago as a "new unlocked cingular 8525" it was new and unlocked, but i have no idea how they unlocked it. I would assume that there would be no warranty now and in any case i live in Canada and would have to ship it down to the states to an AT&T repair center and that sounds like a nightmare to me with the customs and so on.
I will give you a little more background on the problem. the phone worked like a charm without any problems at all for the 10 months that i had it, then the morning of the crash the phones alarm did not go off in the morning and i was almost late for work ... i did not pay it any further attention untill at 3:26pm
that afternoon the alarm went off ??????? (it was set for 6:05am) so i checked the main clock time, it was right. I then checked the alarm time, it was right ??? So i figured that something must have just got confused, so i powered down the phone with the power button to just restart it and while it was powered down i removed the battery to take the oportunity to to clean all those fuzzies and dust that collect in the battery compartment out and put it all together and powered it up again (just by pushing the power button) and this wierd red, green, blue and white screen appeared and that is all that i have seen since ???
I hope that answers your questions and i will start going through the links that you sent and get to reading ... will there be a pop quiz ... lol
Thanks again for your time and i very much appreciate all the time that all of you have spent on me and my phone ..... I know that you all just feel bad for me because i now have to use a Motorolla V551 ... lol

Great Work
ultramag69 said:
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Click to expand...
Click to collapse
Thanks a lot man & great work i unbricked my Herm100 with method u mention above thanks a lot & great job keep it up

I also have this problem.
I d/l Hard-SPL-V7
and when i run RUUWrapper.exe
I get an error saying the application failed to initialize properly (0xc0000135)
What's going on?
How do i fix this?
this happened when i was trying to unlock the phone.
Thanks

need help
when i switch on my orange herm100 it shows On the bootloader screen is displayed:
HERM100
I PL-1.01
HERM100
SPL-1.40.01ipro
history : i buy unlocked orange phone
fewdays back i found no imei ,
yesterday i try to flash by micro sd but in gsm stage its gets hang no progress after extrom stage
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM - (NO ACTION)
OS -
i tryed several time no action, i cant connect by mini usb.
PLEASE help me
tell me which it the right rom to chose? step by step procedure..
how to rectify imei?
thanks and regards
kirtibas

kirtibas, sorry it took so long to reply, 1st thing I'd do is upgrade to SPL 2.10 olipro. This is safer to use than others. then I'd suggest reflashing a stock rom to see if that works. After stock rom works then use a cooked rom as your heart desires... Cheers...

HTC HD2 rom change with non working screen

Hello Everyone.
TBH im my opinion you guys are my last hope to fixing my hd2.
So here's the problem.
I have a HD2 that turns on but does not have a functioning touc screen.
ABOUT MY PHONE:
HTS HD2
Has old android in it ( I dont know which one it is, but i can describe it. It starts up with a BootLoader asking to boot android, so i have the option to press yes or no. It has old blue theme in the background.
Here's the problem. I've called HTC support and i learn my phone still has manufacturers warranty. So basically i can just send in the phone, and ill id have to pay is shipping. BUT! here's the problem. HTC does not approve of third party software installed in the phone, in my case it is the ANDROID. So now im trying to wipe android put, and install windows mobile again. I downloaded the t-mobile stock rom and when i plug in my phone, the windows mobile center automatically pops out but it shows an error symbol.
TL;DR
So my question to you guys is how do i remove Android and install Windows Mobile on an HTC HD2 with a non working screen
Thank you so much guys for even considering to help me
Mod if i posted on the wrong section could you please move it for me.
Thanks

hi,
try this:
http://forum.xda-developers.com/showthread.php?t=956715

Thanks so Much But here's an update
I went ahead and downoaded the HSPL3
I turned on my phone and also pressing the voulme down button which brought to me to a red green and white color. I had my phon conneceted to the computer VIA USB. I first double clicked the T-Mobile rom update thingy and went ahead accpeted the warning signs etc,so the first thing that came up was identifying phone, and after 5 seconds it disappears so nothing came fro that, then later i double clicked the HSPL3 which asked me to either pick the 2.8 or the the 2.8 spl i believe, i had the spl installed so i wen ahead clicked the 2.8. it installed and my phone rbooted and BAM my touch screen worked, and when it asked to boot android i pressed NO. my phone rebooted and iagain the boot loader came up and asked to bott android, so this time i pressed BUt it didnt work because the touch screen stopped working!
So i went ahead to try everything all over but this time i clicked the 2.8 spl and after a minute on my phone it displayed " we hacked it" etc etc etc, i robooted my phone, ad it worked, i turned it on and off twice and it worked i was using my phone after a month So after playing with it alittle bit i decided to put my sim card in it. I turned off the phone and put the Sim card and turned on the phone so i can use it but.....once again the touch screen stopped working... ****!!!!!!

yep, now the touchscreen is once again not working

bump bumpity bump

fusion1204 said:
bump bumpity bump
Click to expand...
Click to collapse
Download a stock WM ROM for your phone, extract and rename your .nbh to leoimg.nbh. Transfer leoimg.nbh. to your SDcard.....enter bootloader mode....there it will flash back to your WM ROM with all HSPL remove. Time to send back to Manufacturer for repair..

Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?

fusion1204 said:
Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?
Click to expand...
Click to collapse
extract that from your .exe file.
Stock ROM can be found here
http://forum.xda-developers.com/showthread.php?t=655653
Make sure you use the Stock ROM specific for your phone, else you will brick your phone.

I went ahead and did that, but nothing changed did i do something wrong?

fusion1204 said:
I went ahead and did that, but nothing changed did i do something wrong?
Click to expand...
Click to collapse
Try following this guide....
http://forum.xda-developers.com/showthread.php?t=681317

10507 Thank you for the links but it didn't wok for me.
UGh!
Am i doing something woring? i mean i can get to the screen where it shows the foru colors, i guess that would be flashing and once i get there i can't do anything else the only way for me to do anything while im on that screen is if i have it connected in with my computer, and also start runinng the HSPL program which switches from Hspl to a NON hspl vice versa.
I hope youre not tired of me lol!
please help me out with this stupid situation im in.
Thank you.

Bumpity bump please help me out

[Q] Hellllllllllllllllllllllllllllllllllllllllllllllll lllp

I was trying to install blackSTONEhengeHyPerSlim_4_1 on my blackstone. I installed olinex and after that stored the nbh and exe file on the sd card and then through task 29 flashed it. The rom got successfully installed but now the phone is stuck at the bootup. It says
Checking Radio...
Checking protocol..
Checking Rom..
But now won't get to the next screen.Because of this i can't get to active sync. Please help..Pleaaaasseee

Did u follow the instructions completely, cause it worked fine for me and others... Do you have radio 1.14 or above installed? Did u try to reflash?

ok, no need to worry. Boot into bootloader. What is your SPL?

Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..

Did you try Vol UP + Vol Down + Power ?

Yes i did try that after my phone got screwed up with test29 method but it shows nothing at all after successfully installing rom..:-s

no need to worry
always read read read and must read before flashing. I think your phone is quite ok. You does task29 to it. what is task 29 means. it means task29 will clean our device completely only splash screen displyaed, phone always stucked on this screen. it is very normal, it means you completyely cleaned your device. now you are ready to flash your device. do the following procedure--
1. remove the battery and reinsert it.
2. now turn on the phone while pushing volume down key.
then bootloader (tricolor screen) mode will be displayed. many times it will not come into bootloader and device normally starts and stuck on splash screen. the reason is simple, you didnt press volume down key properly, it happend many times to me also.
Now remove battery cover, remove battery and reinsert it, dont cover the battery, now take slylus & press volume down strip with the stylus. ( volume up & down keys are installed in battery cover, so when you push volume down key in flap open condition, it should be done by stylus.)
ok
push volume down by stylus & hold it and start the device, it will come in tricolor screen means bootloader mode, on the bottom screen it will show serial.
Now conect the device to the pc & bottom line on the screen will become serial to USB.
Now perform task28= means flash normal rom, do not perform task 29 again.
task29 will take 1 minute to flash while normal RUU will take about 7-8 minute.
try it and give feedback/

kulwant said:
Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..
Click to expand...
Click to collapse
Have you flashsed a differnet radio ?

What you did is just Task29 your phone. Task29 needs something to flash in order to do its thing. Usually we flash radios (good ones obviously) because they are smaller than full roms. If you flash a full rom with Flash29, it will get erased after completion.
What you need to do now (since your phone now has no ROM installed) is boot it while pressing volume down to get to the bootloader, plug via USB and flash a rom using a "non-task29" flasher, like the standard BlackStoneCustomRUU.exe file that comes with basically every rom.

Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks

kulwant said:
Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks
Click to expand...
Click to collapse
Hi mate.
I did somthing for you....so i hope it will helps you.
1. download file from this link. http://hotfile.com/dl/115059516/5623431/Radio_1.13.xx(original_hd_nbh)__task29.rar.html and after unrar.
2. Make task 29 with this one. (Nothing change in that unrar folder)
3. After finished T29, take uot battery, put it back, put device to BootLoad. screen.
4. Connect with PC again and flash your desided ROM. (it means if you choice your rom, after unrar or unzip, Rom has own folder with that all files ...BLACIMG.nbh, BS_CustomRUU.exe, etc......

thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..

kulwant said:
thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..
Click to expand...
Click to collapse
...It's ok mate, like i wrote, i hohe, it 'll helps you.
let me know after....

Any new good looking rom you would suggest for me to try that would be bugfree ???

kulwant said:
Any new good looking rom you would suggest for me to try that would be bugfree ???
Click to expand...
Click to collapse
.... for beginning: T29 finished ok?
for your guestion: Hmmmm, for me...really good ROM is from Cloudyfa, but objectively, it's up to you, which one from this site you choice.

The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s

kulwant said:
The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s
Click to expand...
Click to collapse
Yeas mate, i deleted it. I was thinking, that you download this file already and saved it to your PC.

LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right

kulwant said:
LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right
Click to expand...
Click to collapse
Yes that one is fine. Once T29 is complete take out battery and then re-insert it. Now put phone into bootloader (hold vol down and press power on while still holding vol down. BOOTLOADER IS A TRI-COLOUR SCREEN).
Now flash your rom

i also flashed blackstonhenge hyperslim 4.6 and now touchscreen stopped working....any solution...

Major problems while installing different rom

Hello there!
I got HD2 today, it has windows installed on it and its Swedish.
Ive spent half of day trying to get it done but nothing worked.
I cant install HSPL to go on with the installation, Ive tried everything.
I connect my HD2 to PC and activesync does its work, I can see my mobile phone connected, adding new files works both on local and sd storage.
The problem comes in when I try to install HSPl so I could flash my phone and continue with the installation. Whenever I start HSPL isntallation my HD2 losses its connection with the PC and nothing happens. What could be the problems.
Whats the easiest workaround for this? I really want to install the android os on my phone, I dont like the windows one.
(I have searched the forums, nothing helped me)
MY DEVICE:
ROM v 1.o
Radio T8585
1024Mhz Cpu
Ram 576 Mb
Nand 1024 Mb
32 bit bus
Win mobile 6.5 pro
16 Gb mem card
Is there any other way to install android? Anything?
----------------------------------------------------
So I have tried doing same things today. I tried entering the bootloader using vl down and power up, ol down and reset key, left arrow and power key and the phone just starts my windows nothing. But when I press vl up, dwn and pwr key I get into 4 colour mode and it give me error: Copying file from SD card failed, system will shut down.
I will try to play around it a little bit, maybe try nativeSD somehow, but I dont think Ill manage anything. Help
----------------------------------------------------
When I use clrcad and haret on SDc it starts booting linux, progress bar goes to the end and stays there. Every time. Ive been waiting for some time for it to boot, but it jsut stays there.

Is there a way to get rid of this windows mobile crap easily? Do you think that mobile shops are willing to do this sort of stuff for you?

Try installing HSPL from the bootloader.Turn off phone, hold volume down rocker and boot up.

Marvlesz said:
Try installing HSPL from the bootloader.Turn off phone, hold volume down rocker and boot up.
Click to expand...
Click to collapse
Cant get into the bootloader, as said. I dont know why & whats causing it, but nothing is working as it should be

Ah, forgive me for skipping that part. I know this problem, and I've seen it many times.
Usually, I am not the one who fixes them, so here is one solution:
http://forum.xda-developers.com/showpost.php?p=25940714&postcount=3
Here's another:
http://forum.xda-developers.com/showpost.php?p=36420418&postcount=20
There are many, you need to search for them. I don't know which will work for you.

No help there, its still the same, no bootloader, nothing.
+
I cant seem to find fastboot anywhere in my settings.
+ My mobile is whole Swedish, I dont understand a thing, but I do manage to get around, but I still cant find fastboot like the one poster said that it might be the problem.
Im not sure whats the problem in the end. I feel that this phone is somehow locked, wont let me do such stuff, but I might be wrong, Im not really the kind of guy thats interested in developing phones, so I dont know most of stuff. Hope some more advices might come in.

Wait.. If it's swedish, why not go into settings and change language to yours (or to English)?
Also, you said "no help there". You mean the windows mobile application didn't let you boot into bootloader? I am quite sure you didn't even try it. It should work, trust me
But the question is: Once you're in the bootloader, and get rid of Windows Mobile, how are you going to go into bootloader again? (since there's no longer an app, or windows to RUN that app)

Marvlesz said:
Wait.. If it's swedish, why not go into settings and change language to yours (or to English)?
Also, you said "no help there". You mean the windows mobile application didn't let you boot into bootloader? I am quite sure you didn't even try it. It should work, trust me
But the question is: Once you're in the bootloader, and get rid of Windows Mobile, how are you going to go into bootloader again? (since there's no longer an app, or windows to RUN that app)
Click to expand...
Click to collapse
Well, for the language, I have been trying to change it, but I dont think its possible + Ive found multiple threads on forums about changing lng on windows mobile phone and they said that its not possible.
And for the bootloader, its not working. Seriously, I have been trying to do it for 2 days now. Using buttons, using random apps Ive found here on forums and none of them got me into the bootloader (expect the VL UP, VL DWN, PWR pressed together, which got me into four colour screen (which should be bootloader if Im right), but it turns off straight away if not connected with usb cable. If it is connected it stays at error as said in my first post). I wish I could get rid of the windows somehow so the bootloader would ask me for another rom or however that works, Im not much into it as said.

I somehow managed to get past the verifying the usb connection for HSPL installation, progress bar shows but it goes nowhere & after some time appears this error

buhamuha said:
... (expect the VL UP, VL DWN, PWR pressed together, which got me into four colour screen (which should be bootloader if Im right)...
Click to expand...
Click to collapse
No, that combination should get you into hard resetting your device and not into bootloader. Even if it does get you into the bootloader for a fraction of unit time, it won't allow you to flash anything. Volume down only is to get into bootloader
What happens when you follow this post? And by "what happens" I mean what error EXACTLY do you see?

Marvlesz said:
No, that combination should get you into hard resetting your device and not into bootloader. Even if it does get you into the bootloader for a fraction of unit time, it won't allow you to flash anything. Volume down only is to get into bootloader
What happens when you follow this post? And by "what happens" I mean what error EXACTLY do you see?
Click to expand...
Click to collapse
I have tried that thing yesterday. Didnt work. Tried it right now - it does nothing. I run the app and my phone just goes black (like when you tap the power button, lock or something) and it will stay like that without doing anything until i tap the pwr button to unlock it. Nothing really happens

I want to advise you install a ROM from sd card using the LEOIMG.nbh method. But I am not sure which ROM is for which device. (I never actually flashed my phone from sdcard). That might make the bootloader boot up (?). Also, can you confirm that the volume rockers work fine under windows mobile?
To be honest, I am out of solutions. We should wait for other people's.
Sorry I couldn't help.

Marvlesz said:
I want to advise you install a ROM from sd card using the LEOIMG.nbh method. But I am not sure which ROM is for which device. (I never actually flashed my phone from sdcard). That might make the bootloader boot up (?). Also, can you confirm that the volume rockers work fine under windows mobile?
To be honest, I am out of solutions. We should wait for other people's.
Sorry I couldn't help.
Click to expand...
Click to collapse
No problem man, thank you for trying.
Yes, my vol buttons work jsut fine, its just the thing I cant get into the bootloader, no matter which way I try.
LEOIMG method needs bootloader too, right? Or does it go with the clrcad and haret method? Haret doesnt work for me, starts booting stuff and than jsut stays at it

do exactly as i say and tell me what happens:
remove battery
remove sd card
plug in to pc via usb
hold volume down
put battery in
now you should be seeing the tricolor bootloader, right?

gilbert32 said:
do exactly as i say and tell me what happens:
remove battery
remove sd card
plug in to pc via usb
hold volume down
put battery in
now you should be seeing the tricolor bootloader, right?
Click to expand...
Click to collapse
I have no SD card slot, I think Its hidden somewhere under since its reading it both on PC & phone.
I have tried doing it without the sd card removal but nothing happens.
Where could I look for the sd card, its not on any side, its not under the battery, its not udner the other 2 romovables
--------------
UPDATE:
So I have opened my HD2 up and foudn the sd card under and I have removed it. DId everything you said and still nothing, my HD2 just boots up normally. No bootloader or anything. It seems like my bootloader is hidding somewhere

buhamuha said:
I have no SD card slot, I think Its hidden somewhere under since its reading it both on PC & phone.
I have tried doing it without the sd card removal but nothing happens.
Where could I look for the sd card, its not on any side, its not under the battery, its not udner the other 2 romovables
--------------
UPDATE:
So I have opened my HD2 up and foudn the sd card under and I have removed it. DId everything you said and still nothing, my HD2 just boots up normally. No bootloader or anything. It seems like my bootloader is hidding somewhere
Click to expand...
Click to collapse
this is really confusing. starting to sound like an hd2 clone to me...
can you open the back cover, remove battery and take a photo of the phone, then upload it here? (remove imei/serial/sensitive stuff from picture, using paint or some software )

gilbert32 said:
this is really confusing. starting to sound like an hd2 clone to me...
can you open the back cover, remove battery and take a photo of the phone, then upload it here? (remove imei/serial/sensitive stuff from picture, using paint or some software )
Click to expand...
Click to collapse
mhm could be the clone. Is there any way to do something about it if its a clone?

gilbert32 said:
this is really confusing. starting to sound like an hd2 clone to me...
can you open the back cover, remove battery and take a photo of the phone, then upload it here? (remove imei/serial/sensitive stuff from picture, using paint or some software )
Click to expand...
Click to collapse
buhamuha said:
mhm could be the clone. Is there any way to do something about it if its a clone?
Click to expand...
Click to collapse
I knew it!! I was going to say it might be fake, but deleted that line for some reason. Anyway, with those double sims trays, it's definitely a clone (unfortunately). How much did you pay for it?
Edit: Nope, not that much that can be done with a clone. You'd be lucky if you were able to even change the Windows Mobile ROM.

Marvlesz said:
I knew it!! I was going to say it might be fake, but deleted that line for some reason. Anyway, with those double sims trays, it's definitely a clone (unfortunately). How much did you pay for it?
Edit: Nope, not that much that can be done with a clone. You'd be lucky if you were able to even change the Windows Mobile ROM.
Click to expand...
Click to collapse
Got it for free, my aunt gave it to me. I dont know how much she paid for it. So I should leave it as it is, there is no possible way to change it?

As far as I know (and as my searching abilities go) no, you can't do much. I hope someone proves me wrong.