Database Users

Im so scared...!!

I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.

why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]

mananmistry said:
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
Click to expand...
Click to collapse
:x Forget what this guest just said we are a community who help each other out :x
I am now using the XDAII but when i had the XDA1 i had a similar problem. Got stuck upgrading. Hang onto your horses dude your device isn't dead so breath a sigh of relief. If you have a SD/MMC Card reader then use it to burn the base Rom from
http://lumpistefan.dyndns.org and then install it through the boot loader(Hold the Power button and then press the soft reset button using the stylus(you will enter the boot loader mode and then follow the instructions on how to install the Rom.
------------------------------OR--------------------------------------------
Go to a shop or a friend who had similar device, make sure you have a SD/MMC card with you and then enter the bootloader mode as described above and then copy the ROM on the SD Card. Then insert the card in your device and again enter the Boot Loader mode and Copy the Rom from the SD Card to your device after you are done press the Hard reset button on your device to switch it off keep it off for atleast 60 sec before pressing the hard reset button again to switch it on. Your device will live again.
[/b]A WORD OF ADVICE
Don't touch the Radio Stack on either your device or the other one. Always select Rom only.
If you need further help with using the bootloader search these forums you'll come up with alot of info.
Let me know how it works out

one question
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again

Re: one question
mananmistry said:
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Click to expand...
Click to collapse
I believe there's a way to go-back! Do a flush by pressing on the power button+the hard reset+the navigation button pressed. All at once and that's how you go-back to the original ROM. Let me know if it works and if you dare to do it anyways.. 8)

guest said:
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
Click to expand...
Click to collapse
Mr. Guest you are an idiot, many of us have been at this point one time our another. This is no way to respond to a forum member in need of help.

i'm no techie when it comes to these things but just out of curiousity WHAT causes the upgrade to stop? mananmistry said he was in the middle of upgrading already; is it the rom he used or is it the connection (power flux, cable, sync, etc)? just curious... :wink:
oh and its beers for the others and the loo for the guest

update
now the thing is i got the phone back. I have connected the usb but pc cannot find device and xdatools or the rom .exe files wont install. it says "xda not found via activesync", something like that. I went into the boot loader and it said GSM ERROR and stops. have to press calender key to get into sub-menus. what is the problem. does the rom kitchen .exe files need sactive sync to be present. please can some one tell me.
do i need a sd card reader. can i not just use someone phone to put my sd card and burn onto sd...??

You are now in serious trouble, the GSM error often proves fatal for the phone. You can still flash the rom though by following the previous instructions. After that is completed you will have to try flashing a radio stack. Please be prepared to be disappointed, I wish you the best of luck. The good news is that even if the phone doesnt work you should still have a working pda.

Where can i get a radio stack rom...???
Click to expand...
Click to collapse

where can i get a radio stack rom....will try...
If my gf has a pda with sd card can i use the unit to see the sd card and write the rom on it???

Re: update
mananmistry said:
now the thing is i got the phone back.
Click to expand...
Click to collapse
how did U get the phone back 2 work (bootloader)
thanks
:?:

get a radio stack from here
http://lumpistefan.dyndns.org/tools/

bricked my vogue

i used imcokemans unlocker (which i have done before) and blee0125's kitchen and really screwed up somewhere!
i cant get it past the "htc smart mobility" screen. it comes up, tells me the driver and radio versions, then those disappear like they are supposed to and...nothing else.
any suggestions would be great, plz im dying here!
i have tried hard and soft resetting and...nothing!
THANKS.
EDIT: just for those coming to this ancient and recently revived thread, this (my) problem has been solved. altho there are other people now with similar problems

Have you tried re-flashing?

jim256 said:
i used imcokemans unlocker (which i have done before) and blee0125's kitchen and really screwed up somewhere!
i cant get it past the "htc smart mobility" screen!! it comes up, tells me the driver and radio versions, then those disappear like they are supposed to and...nothing else.
can anybody help me???? PLZ im dying here!
i have tried hard and soft resetting and...nothing!
THANKS.
Click to expand...
Click to collapse
Do a camera power reset and try again.

i tried that and it didnt do anything at all. isnt that just where you hold the end key and the side camera key and stick the stylus into the hole?
if so, it have any different effect than the standard soft reset

AraqirG said:
Have you tried re-flashing?
Click to expand...
Click to collapse
and i did try...sort of. im not sure how to seeing as how i can never make it past the boot screen, and therefore cannot connect it to activesync.
THANKS.

jim256 said:
and i did try...sort of. im not sure how to seeing as how i can never make it past the boot screen, and therefore cannot connect it to activesync.
THANKS.
Click to expand...
Click to collapse
Hold down the power button and the camera button at the same time until the tri colored bootloader comes up. If that works, try flashing the stock rom for your carrier.
If that doesn't work try the same steps with the memory card removed.
If that doesn't work try to do a hard reset and see if that will take you to the bootloader.
Also, what are the numbers in on the bootloader...are you sure your device is unlocked? I believe it should say... SPL-00.40.coke... on the 2nd line if your unlocked.

You shouldn't need to connect to activesync to reboot. After you run ImCokeMan's unlocker you should be unlocked until you run it again.
As I said in the last post, all you have to do to get to the boot loader is hold down the power and camera buttons at the same time. This will put the phone into the boot loader and you should be able to flash back to the stock rom and start over.
It kind of sounds like you relocked the phone and then tried to boot a custom rom.

sorry i wasnt saying i needed to connect to activesync to reboot, i was saying i needed to connect to activesync to flash, and it wouldnt boot up so i couldnt get to activesync.
and i did to imcokemans unlocker, and everything went fine. when i was setting up the device (ie. setting password, time zone, calibration, etc...) i just decided that i didnt need to finish that as i was intending on flashing a custom rom anyway, and so any settings i put up the time to set would be erased.
having said that, i went ahead and starting flashing a custom rom right from the wm welcome screen that you get on a first boot.
thanks a LOT for your help, promptness, and attention

So are you back up and running?

well, now i am. i just took a 30 min drive down to the sprint store and got a replacement :S
thanks a lot for your help though, im scared i may really need to refer back to this thread later. but if i do, at least i know i should be able to fix it!
thanks.

well, i just did it again. i must be doing something wrong in the cooking of my ROMs...about to try out your solution..hope it works!!
wish me luck :S :S :S :S

well i was able to re-flash, but, unfortunately, it is stuck in the same "htc smart mobility" screen again. i think i have been able to narrow it down to the oemizer app. i must be doing something wrong in there.
oemizer http://forum.ppcgeeks.com/showthread.php?p=100746&referrerid=10115
ill keep cooking and trying tonight until i find what it is the problem is i guess, thx for your help guys. especially you 360discgolf.

well, after cooking and flashing too many times to remember this late, all i can do is ask for help when you guys wake up and check this thread.
in the last couple of builds i havent been doing anything with oemizer at all and it still hasnt been working, and i dont think i am doing anything extra in buildos that i havent done before in successful ROM images...it seems sort of erratic.
any suggestions/hints/comments would be great, thanks a lot.

you can't just hold the two buttons and press the reset. You have to hold the two buttons at the same time, then while holding them, use the stylus to hold the reset until it restarts. If you just tap the reset button while hold, it doesn't work.

360discgolf said:
You shouldn't need to connect to activesync to reboot. After you run ImCokeMan's unlocker you should be unlocked until you run it again.
As I said in the last post, all you have to do to get to the boot loader is hold down the power and camera buttons at the same time. This will put the phone into the boot loader and you should be able to flash back to the stock rom and start over.
It kind of sounds like you relocked the phone and then tried to boot a custom rom.
Click to expand...
Click to collapse
i'm having a similar problem. my attempt at flashing didn't go over that well and now when I turn off the device, I can't turn it on again unless I do a soft reset. I tried doing the power/camera thing but all it does is ask "are you sure, yada yada" and then the devices turns off. you were talking about a stock rom? where would I get one and how would I re-flash the rom (assuming that's the problem in the first place.).
Thanks!

vkolas said:
i'm having a similar problem. my attempt at flashing didn't go over that well and now when I turn off the device, I can't turn it on again unless I do a soft reset. I tried doing the power/camera thing but all it does is ask "are you sure, yada yada" and then the devices turns off. you were talking about a stock rom? where would I get one and how would I re-flash the rom (assuming that's the problem in the first place.).
Thanks!
Click to expand...
Click to collapse
what carrier are you?
EDIT: also:
1) what os version are you running? (build number)
2) what radio are you running?
3) what bootloader are you on? (can be accessed via holding power + camera button and poking reset hole)
4) what are the orange numbers in the very bottom right of the screen when you are booting up?
these kinds of things all need to kind of jive for the sleep function to work correctly

jim256 said:
i used imcokemans unlocker (which i have done before) ...
Click to expand...
Click to collapse
If you used the imcokemans unlocker a 2nd time, I believe you re-lock your phone.
You also mentioned that you tried to flash the ROM from the Welcome Screen. That certainly won't work. You have to be at the unlocked rainbow bootloader screen which will load when you run the RUU or when you press Power-Camera-Reset. If it doesn't go into bootloader then you've probably re-locked your phone.

denasqu said:
If you used the imcokemans unlocker a 2nd time, I believe you re-lock your phone.
You also mentioned that you tried to flash the ROM from the Welcome Screen. That certainly won't work. You have to be at the unlocked rainbow bootloader screen which will load when you run the RUU or when you press Power-Camera-Reset. If it doesn't go into bootloader then you've probably re-locked your phone.
Click to expand...
Click to collapse
haha sorry this is a problem that i had a VEERRRRY LONG time ago. have learned a lot since since then, now it is this other fella here we are trying to help him
thx tho!

[Q] Bricked phone after task29 and rom flashing

Hello. First I want to thank all of you who develop roms and the like. I have had such a blast over the past month and a half customizing my phone in ways I never thought possible. Last night I ran flashaholicruu.exe on my HTC HD2 Leo. The task29 seemed to work properly, however when I attempted to flash the rom I received errors. I tried Leo_Radio_2.11.50.26.sfx, which had previously worked on my phone. It stopped at 96%. I did the recovery, however the phone now will not even boot the splash screen. It simply vibrates non-stop when I turn it on until I remove the battery. Does anyone have ANY advice at all? Am I able to load a ROM onto the SD card and directly boot from it while my phone is in this state?
I have removed the battery and reinserted it. Did not work.
I have also tried pressing the volume buttons and the power on button to get the bootloader, but just vibrates in the same manner as when I press on button.
Please help!
Thank you

happend to me with a friends phone...i jus replaced it under insurance

Nismo300zx said:
happend to me with a friends phone...i jus replaced it under insurance
Click to expand...
Click to collapse
Ahh. I wish. T-Mobile is giving me a hard time about replacing it because I was not the original owner of the phone. The phone is only about 3-4 months old though.

I had this happen to me.
Try to load it directly into bootloader by holding vol-down when you press power button, then flash another radio (i recommend 2.12.5) then try another ROM thru RUU.
Also, make sure your battery is place in there securely and that all 3 pins from the phone are sticking out.
I had a situation where one of the pins was sticking vertically and the battery was only hitting 2 (from doing too many battery pulls) and it did this weird vibrate splash screen boot sequence.

electrokitten said:
Ahh. I wish. T-Mobile is giving me a hard time about replacing it because I was not the original owner of the phone. The phone is only about 3-4 months old though.
Click to expand...
Click to collapse
You'll need contact details for the original owner, but by law they have to honor the agreement they put in place with them, regardless of whether you are that person or not.
Just get back onto T-Mobile and if they say no then speak to someone higher up. I know this to be the case after selling a palm pre to someone at the beginning of the year and it died on him shortly after.

johncmolyneux said:
You'll need contact details for the original owner, but by law they have to honor the agreement they put in place with them, regardless of whether you are that person or not.
Just get back onto T-Mobile and if they say no then speak to someone higher up. I know this to be the case after selling a palm pre to someone at the beginning of the year and it died on him shortly after.
Click to expand...
Click to collapse
Really? This is good to know. I contacted the original owner. I feel so bad and I hope he doesn't think I am trying to scam him. I just want a working phone and I think that T-Mobile should honor that.

orangekid said:
I had this happen to me.
Try to load it directly into bootloader by holding vol-down when you press power button, then flash another radio (i recommend 2.12.5) then try another ROM thru RUU.
Click to expand...
Click to collapse
I think the bootloader may be gone. Does the task29 remove this? I can't get even to the bootloader using the method above (I have tried many times).
orangekid said:
Also, make sure your battery is place in there securely and that all 3 pins from the phone are sticking out.
I had a situation where one of the pins was sticking vertically and the battery was only hitting 2 (from doing too many battery pulls) and it did this weird vibrate splash screen boot sequence.
Click to expand...
Click to collapse
Good to know, I will try this. I do have some bent pins.

No task 29 doesn't remove the bootloader, I always use it before flashing a new ROM...
Sent from my HTC HD2 using XDA App

copy the nbh file from the stock rom to the sd card..that usually fix it..

gabbs said:
copy the nbh file from the stock rom to the sd card..that usually fix it..
Click to expand...
Click to collapse
Good advice... Now if only he could access the bootloader he'd be sorted

gabbs said:
copy the nbh file from the stock rom to the sd card..that usually fix it..
Click to expand...
Click to collapse
Major_Sarcasm said:
Good advice... Now if only he could access the bootloader he'd be sorted
Click to expand...
Click to collapse
he needs to rename the .nbh file to LEOIMG.nbh and pair it with the RUU that came
with that same stock ROM
but then again, if he cant get into bootloader, the phone is definitely bricked

electrokitten said:
Hello. First I want to thank all of you who develop roms and the like. I have had such a blast over the past month and a half customizing my phone in ways I never thought possible. Last night I ran flashaholicruu.exe on my HTC HD2 Leo. The task29 seemed to work properly, however when I attempted to flash the rom I received errors. I tried Leo_Radio_2.11.50.26.sfx, which had previously worked on my phone. It stopped at 96%. I did the recovery, however the phone now will not even boot the splash screen. It simply vibrates non-stop when I turn it on until I remove the battery. Does anyone have ANY advice at all? Am I able to load a ROM onto the SD card and directly boot from it while my phone is in this state?
I have removed the battery and reinserted it. Did not work.
I have also tried pressing the volume buttons and the power on button to get the bootloader, but just vibrates in the same manner as when I press on button.
Please help!
Thank you
Click to expand...
Click to collapse
What exactly did you do to try and enter bootloader mode? You said you pressed the volume 'buttons' and the power button but that combination would initiate a Hard Reset and not bootloader mode..
How to get into your Bootloader
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear.
3. To exit Bootloader you need to remove your back cover and pull the battery out for a few seconds, then replace it and press the power button to reboot your phone.
If you cannot get into the bootloader with the above instructions then it looks like you have bricked your device somehow but im not sure exactly how you could do it as task29 doesnt touch HardSPL.
If you can get into bootloader then you can flash a rom back to your device using the sd card method in my guide *HERE*.
Mark.

[Q] Stuck at bootloader at boot

Hi
A friend of mine has a HD2, never HSPL or anything and still running on 1.42 rom.... Now everytime it boots it goes straight into the bootloader. Since its never been messed around with I find it odd, seen it before with people with other phones. Would this just be a corrupted ROM and therefore it goes there, would if poss a stock rom flash be able to restore the phone, if that is not the case then a warranty return is still valid, but obv not wanted.
What do you think, will this work? I did search but everyone's posts come up with I task 29 and now stuck... etc and not from a stock bootloader as well!
Cheers any help will be appreciated, my first thing I will get him to try is a rom reflash but that will be tonight, I'll update on the progress then!

First thing I would check is if his volume button is stuck for some reason. Second would be to see if it detects a USB connection, then hard spl and new rom from that point. Keep us posted.
Sent from my GT-P1000 using XDA App

chris10230 said:
Hi
A friend of mine has a HD2, never HSPL or anything and still running on 1.42 rom.... Now everytime it boots it goes straight into the bootloader. Since its never been messed around with I find it odd, seen it before with people with other phones. Would this just be a corrupted ROM and therefore it goes there, would if poss a stock rom flash be able to restore the phone, if that is not the case then a warranty return is still valid, but obv not wanted.
What do you think, will this work? I did search but everyone's posts come up with I task 29 and now stuck... etc and not from a stock bootloader as well!
Cheers any help will be appreciated, my first thing I will get him to try is a rom reflash but that will be tonight, I'll update on the progress then!
Click to expand...
Click to collapse
The post above me is correct check and make sure the volume down button is not stuck/Hung in the down position. If it is stuck in the down position like it is being held down at boot then this is the cause of it going straight to bootloader at boot up. If there is no problem with the volume down button then try a hard reset of the HD2. Warning this will reset your friends HD2 tolike it was fresh out the box so any photos, videos, documents, and etc that is not on the SD card they will lose. Also any contacts that are not backed up withan app like Microsoft My Phone will be lost. To do the reset while the HD2 is off bold the volume up and the volume down buttons down and press and bold the power button down. When you see the tri color screen come up release the volume and power buttons and follow the instructions on the screen (hint: you will want to press the vume up button). Now if after the Hard reset your friends HD2 still goes to bootloader at boot up then download and flash the stock ROM for their HD2 you can find it on HTC.com but make sure you varifiy that it is for their HD2 by entering the serial number of their HD2 you can find the serial number look under the battery. To flash the ROM let the HD2 boot up to the bootloader and then connect it to the computer via USB cable and wait for the Serial in the white bar of the boooader screen to change to USB and for your computer to show it recognize the pbone and then run the .exe or RUU wich everone the ROM has.

Never thought of the key being held done will try that first.
Also I won't HSPL'ing as its in warranty and a half HSPL'ed phone is well useless

OK so i feel like a bit of an idiot for this one. Turns out what I call a bootloader and he does is totally different. For me Its the tri-colour screen, for him its the red/orange windows boot screen. So it was all solved by a HR. Great..
Sorry for those who offered the advice but it really was not needed. but solid advice it was, you always can rely on help in here

[Q]Stuck in "smart mobile"(Edit3.5)HELP REALLY NEEDED.

Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!

Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.

chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?

masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.

chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.

masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.

(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship

Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you

Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.

Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards

CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!

Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone