Related
Hi all,
my HTC is broken as the vol down hardware button is not working. I was arguing is there's some way to enter bootloader without it. Please also note that I'm unable to start Windows Mobile as the phone is formatted.
Thank you !!
Seems no way ?
Il_Pres said:
Seems no way ?
Click to expand...
Click to collapse
does your phone boot?
an easy way to get there is to start flashing a rom it will kick you to the boot loader ...
But there are some endkey replacements that have the option to restart in the boot loader ...
watcher64 said:
does your phone boot?
an easy way to get there is to start flashing a rom it will kick you to the boot loader ...
But there are some endkey replacements that have the option to restart in the boot loader ...
Click to expand...
Click to collapse
Hi,
thank you for your reply. Unfortunately the phone has been Task 29 Formatted so it's unable to boot to OS. These "End key Replacement" sounds good. What are they ment for?
I've disassembled the phone and found out that the flex cable of VOL Keys is broken. So NO VOL DOWN. Just ordered a new flex cable from China, but it will take ages to get to Italy.
Any help much appreciated
Endkey replacement: http://forum.xda-developers.com/showthread.php?t=704631
Gaz Touch Tools
Using one of them you can go into bootloader mode.I prefer endkey.
Mike
Il_Pres said:
Hi,
thank you for your reply. Unfortunately the phone has been Task 29 Formatted so it's unable to boot to OS. These "End key Replacement" sounds good. What are they ment for?
I've disassembled the phone and found out that the flex cable of VOL Keys is broken. So NO VOL DOWN. Just ordered a new flex cable from China, but it will take ages to get to Italy.
Any help much appreciated
Click to expand...
Click to collapse
well your phone has to boot to use the endkey replacements ...
even if it was task29 if you run the rom installer it it should kick you into the boot loader, but I am not sure about that, does the PC detect the phone over usb, or you could flash from the SD card ...
watcher64 said:
well your phone has to boot to use the endkey replacements ...
even if it was task29 if you run the rom installer it it should kick you into the boot loader, but I am not sure about that, does the PC detect the phone over usb, or you could flash from the SD card ...
Click to expand...
Click to collapse
No USB detection... No Bootloader, No Reset, No OS.
I suppose that to flash from SD Card you need to get into the Bootloader, right?
Thanks (almost desperate)
Just Called HTC support... they say to leave the phone without battery for 2 hours and hope to spawn a hardware reset... will this work :/ ?
Waited 2 hours: NO JOY.
Anyone?
Il_Pres said:
Hi all,
my HTC is broken as the vol down hardware button is not working. I was arguing is there's some way to enter bootloader without it. Please also note that I'm unable to start Windows Mobile as the phone is formatted.
Thank you !!
Click to expand...
Click to collapse
Not sure if it will work or but have you tried an app like everyWAN remote support personal edition?
It basically connects to phone and gives you a view of it via your PC I know you can reboot from pc etc and changes key preferences so maybe you could change the down key config
maybe wont work if you have no OS though but worth a shot the app i use is from sparus-software.com
hope that will help
Il_Pres said:
No USB detection... No Bootloader, No Reset, No OS.
I suppose that to flash from SD Card you need to get into the Bootloader, right?
Thanks (almost desperate)
Click to expand...
Click to collapse
I do not believe you need to enter the bootloader to flash from the SD card, search the forum for it but , If I remember use a fat32 formated sd card, use a 4 gig if you have an extra one, the ones that come with the phone seem to be flakey when it comes to flashing ..., and if memory serves me put the nbh in the root of the card and name it leoimg.nbh
Hi Thank you for your suggestions... unfortunately it seems the only way to flash for SD is with bootloader... just tested
Guys can somebody help me? I'm trying to install this ROM and when I'm at the part where it says "Waiting for USB connection..." and box pops up and says "The application has failed to start because RAPI.dll was not found. Re-installing the application may fix the problem." How do I install RAPI.dll? Also right now my phone is in MAGLDR v1.12 and it's stuck at the USB Flasher mode screen saying "Wait USB...". Can I just take out my battery and power on and it will boot in to the previous NAND ROM I had on my HD2?
I've put a picture up of all the files that came with the download. I don't know what I'm doing! I'm new to this stuff.
Skellyyy said:
Guys can somebody help me? I'm trying to install this ROM and when I'm at the part where it says "Waiting for USB connection..." and box pops up and says "The application has failed to start because RAPI.dll was not found. Re-installing the application may fix the problem." How do I install RAPI.dll? Also right now my phone is in MAGLDR v1.12 and it's stuck at the USB Flasher mode screen saying "Wait USB...". Can I just take out my battery and power on and it will boot in to the previous NAND ROM I had on my HD2?
I've put a picture up of all the files that came with the download. I don't know what I'm doing! I'm new to this stuff.
Click to expand...
Click to collapse
Dont worry.
Press the power button and you will go to magldr menu.
Did you run daf.exe with right click and run as administrator?
If you did and it stil wont install, try unpacking the file you downloade again.
Did you connect the usb cable to the phone, before runing daf.exe?
Sorry, had to ask
Sent from my HTC HD2 using XDA App
lms1407 said:
Dont worry.
Press the power button and you will go to magldr menu.
Did you run daf.exe with right click and run as administrator?
If you did and it stil wont install, try unpacking the file you downloade again.
Did you connect the usb cable to the phone, before runing daf.exe?
Sorry, had to ask
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
I tried the power button and it wouldn't go back.
Luckily, I used a different computer and it's installing as we speak. Pheeeewwww!
I didn't even have a .daf file. Only the ones I included in the post above.
If there's any problems, I'll get back on here.
Were you by chance using WinXP on the original PC? Many versions seem to need drivers installed for it to work, while it generally works without such on Vista & Win7.
RAPI.dll (Remote API) is included with ActiveSync or Windows Mobile Device Center. I guess the original machine didn't have the relevant one of them installed, or it did and for some reason RAPI.dll was missing/knackered. (This is just for future reference if anyone comes across this thread looking for possible answers.)
Glad it's working now
Hmmm guess what? I'm stuck flashing a new ROM now. It comes up and says "Wait USB... USB"
But the ROM won't flash?
Skellyyy said:
Hmmm guess what? I'm stuck flashing a new ROM now. It comes up and says "Wait USB... USB"
But the ROM won't flash?
Click to expand...
Click to collapse
What does it display on the phone screen?
lms1407 said:
What does it display on the phone screen?
Click to expand...
Click to collapse
It just has the MAGLDR bar thing with
aMAGLDR V1.12
Build: Jan 12 2011 21:09:22
by Cotulla 2011
_______________
USB Flasher mode
Wait USB... USB
Click to expand...
Click to collapse
That's all it says.
Skellyyy said:
It just has the MAGLDR bar thing with
That's all it says.
Click to expand...
Click to collapse
And when you start installer.exe - run as administrator - it stays on "waiting usb connection?
Check if active sync has "allow usb connections" dissabled! This is if you are on XP.
If this doesn't work, try another build and see what happens.
lms1407 said:
And when you start installer.exe - run as administrator - it stays on "waiting usb connection?
Check if active sync has "allow usb connections" dissabled! This is if you are on XP.
If this doesn't work, try another build and see what happens.
Click to expand...
Click to collapse
Yeah, it comes up screen after it though saying...
[Happen error
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
"
Click to expand...
Click to collapse
Skellyyy said:
Yeah, it comes up screen after it though saying...
Click to expand...
Click to collapse
Come on, make an effort
http://www.google.com/cse?q=RSPL\RS...ub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1
Go and read the first result on the page
Read the whole thread
Hope this helps finaly
lms1407 said:
Come on, make an effort
http://www.google.com/cse?q=RSPL\RS...ub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1
Go and read the first result on the page
Read the whole thread
Hope this helps finaly
Click to expand...
Click to collapse
I appreciate all your help. But, I think my phone has froze in MAGLDR. Can I just take out the battery and reboot? Or will I have to reset the phone (red button) and flash my phone all over again?
Skellyyy said:
I appreciate all your help. But, I think my phone has froze in MAGLDR. Can I just take out the battery and reboot? Or will I have to reset the phone (red button) and flash my phone all over again?
Click to expand...
Click to collapse
Remove the battery, insert it again.
Hold the power button untill magldr menu appears.
Read the Help thread that i pointed you to.
lms1407 said:
Remove the battery, insert it again.
Hold the power button untill magldr menu appears.
Read the Help thread that i pointed you to.
Click to expand...
Click to collapse
Thank you for all your help kind sir! I didn't know yo could take the battery out while in MAGLDR. Rookie mistake.
I've thanked all your posts in this thread. Thank you!
Just a quick thing.... it's installing on MAGLDR, the ROM I had before had Partitions for DATA2SD, this one doesn't so I formatted it with one singled FAT32 partition. Now on MAGLDR it says, PARTITION LAYOUT NEW
Do you want to reserve date? Do I save it, clear it or abondon flashing?
I clicked to save it. Hopefully I didn't do the wrong thing.
Skellyyy said:
I clicked to save it. Hopefully I didn't do the wrong thing.
Click to expand...
Click to collapse
By saving the old data you might get errors - Force Close applications - later on when the Android system loads.
If mistakes happen you will have to format the card again - properly - and reflash clean.
What build are you flashing?
lms1407 said:
By saving the old data you might get errors - Force Close applications - later on when the Android system loads.
If mistakes happen you will have to format the card again - properly - and reflash clean.
What build are you flashing?
Click to expand...
Click to collapse
Will do. The ROM I was flashing was a clean gingerbread, now I'm using FutureShock MIUI. Recommend it!
Btw, do you install WP7 the same way as you do an Android ROM? Or is it a whole different process?
Skellyyy said:
Will do. The ROM I was flashing was a clean gingerbread, now I'm using FutureShock MIUI. Recommend it!
Btw, do you install WP7 the same way as you do an Android ROM? Or is it a whole different process?
Click to expand...
Click to collapse
It's the same, there is a whole thread about WP7. It should be easy, just remember that WP7 formats your card with it's own partition and then if you want to go back to Android you have to reformat gain.
Take it easy.
NEW TO THIS Please help..
I have rooted, flashed, modded, and repaired dozens of android native phones...
this one was quite different.. However.. i was able to successfully run Android 2.3 on one of my friends HD2's,, and another one is giving me HELL and back..
I had what i thought was stable Android 2.3 ROM after flashing DESIRE HD ROM through Clockwork.. I've been testing ROM's on this phone for a few days.. and today i decided to try to turn on the phone.. every time i turn it on... (tried hard reset),, i get to aMAGDLR V1.11 screen that is BLANK!!! ALL BLACK!!!
I do not know how to actually get the phone to turn on from this point. It is a tmous hd2 and i did flash a ".50" spl and whatnot... but today, this morning.. it decides to act up and i don't know what to do! any one have any ideas?
Okay Guys I need help...i have the htc hd2...i put android 2.2 nand on there few months back....wanted to try WP7 hate it...problem is I can not get it to go back to 2.2 I can install it..I get usb connection problems..then it reads it as a cdma device and lables it as leo70 ..Need detailed help asap thanks in advance.
michael8780 said:
Okay Guys I need help...i have the htc hd2...i put android 2.2 nand on there few months back....wanted to try WP7 hate it...problem is I can not get it to go back to 2.2 I can install it..I get usb connection problems..then it reads it as a cdma device and lables it as leo70 ..Need detailed help asap thanks in advance.
Click to expand...
Click to collapse
You aren't trying to flash it while you're in wp7, are you? I don't see why else it would label it as a leo70. You flash while in magldr... go to the flash option in magldr, then flash the android rom. If you're doing it that way, then please state exactly what you're doing so we can figure out if you're doing anything wrong.
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
zarathustrax said:
You aren't trying to flash it while you're in wp7, are you? I don't see why else it would label it as a leo70. You flash while in magldr... go to the flash option in magldr, then flash the android rom. If you're doing it that way, then please state exactly what you're doing so we can figure out if you're doing anything wrong.
Click to expand...
Click to collapse
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
Sounds like there's a problem with the driver. Reinstall windows media center and see if your phone is properly recognized by your pc.
Otherwise, you could try restoring winmo 6.5 directly via sd card. Google how to do this, as I'm replying using my phone and it's a tad difficult to search the guide for you.
michael8780 said:
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
Click to expand...
Click to collapse
Like person above said, make sure all drivers have successfully installed... also make sure you're giving it administative rights when running flasher. I know sometimes when I flash, the administrative permission window doesn't pop up the first time and then it gives similar errors like you're stating. If it still doesn't work, then try reflashing magldr by holding vol down when you turn on to go to bootloader, and flashing magldr installer. Might be a good idea to task 29 it, too.
zarathustrax said:
Like person above said, make sure all drivers have successfully installed... also make sure you're giving it administative rights when running flasher. I know sometimes when I flash, the administrative permission window doesn't pop up the first time and then it gives similar errors like you're stating. If it still doesn't work, then try reflashing magldr by holding vol down when you turn on to go to bootloader, and flashing magldr installer. Might be a good idea to task 29 it, too.
Click to expand...
Click to collapse
hey guys, i have the same problems machael8780, win7 treats HD2 as a CDMA device.
and i cant get it into usb mode.
i entered MAGLDR(ver1.13), choose 5 usb flasher mode, and stop there.
after that i make hd2 into 4colors screen with use connected, and i reinstalled MAGLDR 1.13. the process is ok.
but i still cant get HD2 into usb mode successfully.
Come on guys help here we are stack to win 7 !!!....a guide to go back to android please.....
110718 said:
Come on guys help here we are stack to win 7 !!!....a guide to go back to android please.....
Click to expand...
Click to collapse
So when you guys go in to tri-color "serial" doesn't change to "USB"...
Sent from my LG-P999 using xda premium
No..doesnt...windows dont see sd...
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume down and power on the phone and that should bring u into the bootscreen mode
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
Hi all
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
rikardo1979 said:
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
mariodna said:
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
Click to expand...
Click to collapse
rikardo1979 said:
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
Click to expand...
Click to collapse
:S Nothing....
not happened to anyone else?
my Hd2 is now a brick?
mariodna said:
not happened to anyone else?
my Hd2 is now a brick?
Click to expand...
Click to collapse
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
rikardo1979 said:
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
as far as i remember it was the volume down button to get into booloader.
silverwind said:
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
Click to expand...
Click to collapse
I don´t understand all...do you say me taht install android again??¿ i tried...with recovery mode, DAF mode and data2ext4.... but nothing....
Are you sure you're just downloading ROM's and using the same Clockworl for all? All ROM's have different partition layout requirements for Clockwork. Check out the ROM thread and look for something about the Clockwork partition size. I usually just Ctrl Find then look for 'CWM'.
If that's not the case, you may be downloading ROM's which need an Ext3/4 partition on the SD card. Do you have an Ext partition?
Well you have the partition, so the only thong it could be, quite possibly is the wrong Clockwork size. As far as I know, I think there's an included file in the TyphooN thread that has a CWM inside it. Download it, flash it via the .daf file, then go back in to recovery and flash the TyphooN .zip again.
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
Reading other posts I see you have tried everything, so I suggest you go back to the start, i.e install a Win 6.5 rom from HTC using the SD card method which will erase everything on your phone(including HSPL) and revert your phone back to factory status..
and then try again, use a Android NAND rom which does not required any ext/data2sd/apps2sd partition by default and see where u get with it.
yeah, u right. its volume down my bad sorry
it was a long night for me
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
Here's the CWM file you should be flashing if you're using TyphooN.
http://www.multiupload.com/5VH6M9XM8B
No need to restore to factory ROM etc. as even a Task 29 would be more useful and easier.
Thank you very much when i arrive to my home i try the options that you tell me.
Thank you again
No problem-o.
Don't forget, if I helped, don't forget the 'Thanks' button.
Curry curry curry
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
You're from India aren't you
rikardo1979 said:
yeah, u right. its volume down my bad sorry
it was a long night for me
Click to expand...
Click to collapse
as long as it was a good night, you are excused
ALL_XDA_MODS_R_C*NTS said:
You're from India aren't you
Click to expand...
Click to collapse
wrong, try again
Sorry i was working this days...
I think that i made good the partitions... but any romload compleate.... Recovery don´t run, when i install a DAF Rom the load stop in te first screen.....
And i can´t do the tricolor screen... the buttons are well...but the tricolor screen no....
Sorry could you try explain in better English? Maybe use a translator.
"flash type 0 power reason 1 bootup_w_pwr_key_pressed"
That's the only thing written on my htc hd mini screen now.
After rebooting in "4-colored-screen mode" and flashing original rom (DAN) up to 100% device reboots and same thing happens, but with a little change - "flash type 0 power reason 6 bootup_w_warm_reset". Last flashed working rom was android "sense", it started "freezing", after soft-reseting the device i saw this grey screen. Already tried flashing different roms, taking the battery out for a long period, booting with vol+\vol- buttons pressed. Task29 freezes at 0%. Nothing helped.
Any advice anybody?
PS: sorry for my cr*ppy English, hope everything written above is available for understanding.
Please some pictures or more informations about ROMs you used,
iPlasm said:
Please some pictures or more informations about ROMs you used,
Click to expand...
Click to collapse
at first, it was RUU_Photon_HTC_DAN_1.36.403.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe (original unmodified ROM, downloaded from shipped-roms)
then i switched to Gabanna's 21686, but it had some issues with gps in my case, so i went back to RUU_Photon_HTC_DAN_1.36.403.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe and decided to switch to Android - HTC Sense 3.5 Android 2.3.5 with Beats Audio. It worked fine for 2 days, even gps came back from dead.
Thank you, hope this will help solving my case.
I think you better post some pictures here...., what you said now it seem OK
iPlasm said:
I think you better post some pictures here...., what you said now it seem OK
Click to expand...
Click to collapse
umm... pictures of WHAT?
Pictures of your phone that what happens, take pictures on the screen phone while the problems appears...
iPlasm said:
Pictures of your phone that what happens, take pictures on the screen phone while the problems appears...
Click to expand...
Click to collapse
I haven't got a camera to take pictures, and my problem kills the ability to take screenshots.
Once again:
-grey screen
-red text "flash type 0 power reason 1"
-blue text "bootup_w_pwr_key_pressed"
That's all.
2bigfella said:
I haven't got a camera to take pictures, and my problem kills the ability to take screenshots.
Once again:
-grey screen
-red text "flash type 0 power reason 1"
-blue text "bootup_w_pwr_key_pressed"
That's all.
Click to expand...
Click to collapse
it's first time I hear this, I think... maybe try with another battery or plug USB to Computer on it?
/
it doesn't seem that you have tried android ROMs? right?
iPlasm said:
it's first time I hear this, I think... maybe try with another battery or plug USB to Computer on it?
/
it doesn't seem that you have tried android ROMs? right?
Click to expand...
Click to collapse
I've searched for another battery in local stores - no success. The price of new, brought from ebay etc. would be equal to price of used HD Mini, and i don't want to waste money on buying some low-class-chinese-piece-of-cr%p battery, politely called "replica".
Could you, please, rephrase that "plug-usb-to-computer-on-it", because i can't understand what you mean.
Wrong, last working ROM (before the problem started) was HTC Sense 3.5 Android 2.3.5 (flashed to NAND)
So you have tried Android Installing ?
"plug-usb-to-computer-on-it" Cable your HTC HD Mini Cable, connect to PC>Cable<HTC HD Mini. then try install CWM Recovery.
dear 2bigfella, I'm still not sure whatever you where just in WM6.5 or you had android after all that, what I understood now is your CWM hasn't been installed correctly. Pictures of your phone will help me to know the problem... don't you have at least a camera or bring your friends to take some pictures on it
iPlasm said:
So you have tried Android Installing ?
"plug-usb-to-computer-on-it" Cable your HTC HD Mini Cable, connect to PC>Cable<HTC HD Mini. then try install CWM Recovery.
dear 2bigfella, I'm still not sure whatever you where just in WM6.5 or you had android after all that, what I understood now is your CWM hasn't been installed correctly. Pictures of your phone will help me to know the problem... don't you have at least a camera or bring your friends to take some pictures on it
Click to expand...
Click to collapse
aaaaaand again (3rd time): last rom working on my phone was (before the problem started) HTC Sense 3.5 Android 2.3.5 (flashed to NAND)
googled cwm recovery - 1. htc hd mini isn't supported and 2.MY PHONE ISN'T WORKING! I can't install apps on it because the only two things i can see on it is a)grey screen, described above and b)bootloader (4-colored-screen mode)
Okay now it's better to know... (don't google for cwm, it's here already)
restart device, when you see HTC Bootscreen.. press and hold down Volume - down, until you're entered fastboot mode, be sure that your cable is connected to PC<>Photon, and begin install CWM from here (go to dev section xda photon)
iPlasm said:
Okay now it's better to know... (don't google for cwm, it's here already)
restart device, when you see HTC Bootscreen.. press and hold down Volume - down, until you're entered fastboot mode, be sure that your cable is connected to PC<>Photon, and begin install CWM from here (go to dev section xda photon)
Click to expand...
Click to collapse
could you please post a link for cwm?
CWM? it's here for example: http://forum.xda-developers.com/showthread.php?t=1756672
you should now find it
iPlasm said:
CWM? it's here for example: http://forum.xda-developers.com/showthread.php?t=1756672
you should now find it
Click to expand...
Click to collapse
didn't work... :crying: "waiting for device" and nothing happens
have you installed the abd driver to pc before install the cwm recovery ?
arliuivps said:
have you installed the abd driver to pc before install the cwm recovery ?
Click to expand...
Click to collapse
sure i did
Okay, then does the window of LK installing... did you see (Device founded) or Not founded?
Please give us some pictures of your phone or your windows, do something that we can help you faster..
iPlasm said:
Okay, then does the window of LK installing... did you see (Device founded) or Not founded?
Please give us some pictures of your phone or your windows, do something that we can help you faster..
Click to expand...
Click to collapse
Hi, I have the same problem, but when i get colored screen and conect to PC, win recognized it like Qualcomm CDMA Technologies MSM. I've installed Android ADB Interface. When I start start-photonic.bat it wait my device:crying:
Thanks for help, anyway, and sorry my english.
I can write anything on SDCard with another phone. Maybe it help for autorun.
vitvichy said:
Hi, I have the same problem, but when i get colored screen and conect to PC, win recognized it like Qualcomm CDMA Technologies MSM. I've installed Android ADB Interface. When I start start-photonic.bat it wait my device:crying:
Thanks for help, anyway, and sorry my english.
I can write anything on SDCard with another phone. Maybe it help for autorun.
Click to expand...
Click to collapse
-----
Problem solved.
I cleaned memory, did like schlund said in post#2 and #6 http://forum.xda-developers.com/showthread.php?t=1852522&highlight=task+29 and flashed WM from official site.