Database Users

HTC G1 Dead

Hello!
my G1 does not boot...
i flash wrong hboot...
help me please boot thise device...

You can repair the bootloader by jtag tool like Omnia Repair Tool (ORT).

ohfar said:
You can repair the bootloader by jtag tool like Omnia Repair Tool (ORT).
Click to expand...
Click to collapse
thank you, but it is device cost more then my g1
may be service centre have Repair Tool...
any posible do not work?

rasperepodvipodvert said:
Hello!
my G1 does not boot...
i flash wrong hboot...
help me please boot thise device...
Click to expand...
Click to collapse
more details please? What exactly did you do? It's hard for anyone to help you without sufficient information.

cg87 said:
more details please? What exactly did you do? It's hard for anyone to help you without sufficient information.
Click to expand...
Click to collapse
i flash this file "update-hboot-1762007-signed.zip" from recovery-RA-dream-v1.6.2
and reboot my G1, then G1 dead
update-hboot-1762007-signed.zip - is HTC Magic hboot ...
View attachment update-hboot-1762007-signed.zip
red lights when usb cable connect to PC....
i don't belive that kill boot program it is possible.... why g1 has no button for hard reset

If the SPL is screwed its screwed.
Enjoy your new paperweight.

vixsandlee said:
If the SPL is screwed its screwed.
Enjoy your new paperweight.
Click to expand...
Click to collapse
but power lights is on when i attached G1 to PC.
i want boot from SD card... make GOLD CARD and boot... it is may be help me?

rasperepodvipodvert said:
i flash this file "update-hboot-1762007-signed.zip" from recovery-RA-dream-v1.6.2
and reboot my G1, then G1 dead
update-hboot-1762007-signed.zip - is HTC Magic hboot ...
View attachment 293642
red lights when usb cable connect to PC....
i don't belive that kill boot program it is possible.... why g1 has no button for hard reset
Click to expand...
Click to collapse
Why did you flash a Magic SPL on your G1 which is a Dream?

Reading is a lost art. Only excuse he has is that English isn't his first language.

so will it not boot at all?
have you tried to boot into recovery mode?
i would try booting into recovery mode. if you are able to, then you may be able to save the correct file onto the sd card using your computer, then putting it back into the phone, then doing the recovery mode. using the command prompt to flash the boot image.

cg87 said:
Why did you flash a Magic SPL on your G1 which is a Dream?
Click to expand...
Click to collapse
because i noob

jakijal said:
so will it not boot at all?
have you tried to boot into recovery mode?
i would try booting into recovery mode. if you are able to, then you may be able to save the correct file onto the sd card using your computer, then putting it back into the phone, then doing the recovery mode. using the command prompt to flash the boot image.
Click to expand...
Click to collapse
i don't boot into recovery mode... SPL is wrong...
When i press HOME+POWER don't enithing...
When i press POWER+BACK - lights(diod) is of...
I have recovery boot on this device (G1), but i didn't because don'n boot into recovery mode....((((((

I'll make this really easy.
If Home + Power doesn't work
If Camera + Power doesn't work
You need a new phone.

I may eat those words. It appears some people have tried this and reported it working:
http://forum.xda-developers.com/showthread.php?t=571457

r4d14n7 said:
I may eat those words. It appears some people have tried this and reported it working:
http://forum.xda-developers.com/showthread.php?t=571457
Click to expand...
Click to collapse
It's very rare that works..
However.. the JTAG thread has finally born some fruit: the first successful unbrick!
http://forum.xda-developers.com/showpost.php?p=5911627&postcount=302

Dead phone! Microwave?

My phone refuses to boot winmo, it just gets stuck at a white screen (Its worked fine for 6 months, and decided to die today -_-)
So, I want it fixed!
But....
It will boot to the tricolour whatsit so it clearly shows 'coutullaHSPL'
But everytime I try to restore the stock Radio, or ROM is fails.
With the words :
"LEOIMG.nbh - FAIL" and "update terminate UPDATE FAIL"
In red writing.
Which is something, after over a year of doing this stuff on my HD2 alone I have never had happen to me.
So I cant take the phone back to stock, so no warranty!
So what can I do from here? Put her in the microwave so she wont turn on at all?

try removing microsd card, this happens when u have a corrupt img file either on ur pc or microsd...

doctorcete said:
try removing microsd card, this happens when u have a corrupt img file either on ur pc or microsd...
Click to expand...
Click to collapse
Tried it, and nothing! I've tried 3 different official roms now

When you are in Bootloader mode and your USB cable is plugged in what does the screen say at the bottom line ? Serial or USB ?
If you can see USB its all right. So take HSPL2 and run it, after that perform task29. Then try to flash customROM.
This is how it worked for me.

RayDag said:
When you are in Bootloader mode and your USB cable is plugged in what does the screen say at the bottom line ? Serial or USB ?
If you can see USB its all right. So take HSPL2 and run it, after that perform task29. Then try to flash customROM.
This is how it worked for me.
Click to expand...
Click to collapse
Serial
Sometimes it says neither!

actually had the same problem, its the problem with the sd card, what you can do is reformat it then redownload the rom and try again, should work.
Luckych

did you try copy leoimg to your sd card then boot the phone ?

u use T-Mobile stock rom?

Serial
Sometimes it says neither!
Click to expand...
Click to collapse
What´s your operating system ?
I´m using Windows 7 so i dont´t have the trouble to install the right USB driver´s...
If your device says "serial" there must be a porblem with the drivers... It has to show you "USB". Only then you will be able to flash it directly over your USB cable and CustomRUU...

@OP.
If this thread turns into another of your "how can I brick my phone" threads, it will be closed too.
Fix the phone, or return it legitimately. Stop asking for help to commit warranty fraud.

pulser_g2 said:
@OP.
If this thread turns into another of your "how can I brick my phone" threads, it will be closed too.
Fix the phone, or return it legitimately. Stop asking for help to commit warranty fraud.
Click to expand...
Click to collapse
It was news to me it was illegal, considering the amount of people (including staff!) who tell you to smash up your laptop to get a new one lol.
I explained that to another mod.
Sorry about that.
Well if anyone has any help on a fix, i'd be grateful!

lonelykatana said:
It was news to me it was illegal, considering the amount of people (including staff!) who tell you to smash up your laptop to get a new one lol.
I explained that to another mod.
Sorry about that.
Well if anyone has any help on a fix, i'd be grateful!
Click to expand...
Click to collapse
I would do the following to get your device up and running again legitimately:
1. Take SD card out of device, insert into Card reader and then PC.
2. Download from HTC's offical website Stock ROM 1.66 (or even 1.43) with your S/N
3. Extract this RUU.....exe file to your desktop with 7-zip or Powerarchiver.
4. Rename custom.nbh to leoimg.nbh
5. Check if your SD card is not corrupt or damaged
6. If not, then copy leoimg.nbh to the root of your SD card
7. Remove SD card from PC and reinsert in the powered off device, which is not connected to your PC.
8. Press and hold vol down button and then shortly press on/off button. You should then enter bootloader screen and 1.66 will be automatically installed on your device.
9. At the end of the procedure there should be a message: installation succesfully. If yes, press the little red button beneath the battery to perform a soft reset or remove battery, wait 10-15 secs and reinsert battery and push the on/off button.
10. When the phone has booted up correctly after the SR, perform for extra security a hard reset.
When all goes as it should, you will have the the official 1.66 HTC ROM on your device.
Good luck and regards, Kuzibri

please help

i break my usb so I take phone to shop for fix after a week I got the phone back. and now when connected to any pc 'usb not recognized' I try update drivers bat nothing hapen .....anybody can help????

take it back to the shop and complain. maybe they cross soldered some usb pins, so the cable only charges, not carries data.

I gave him a fix again and after a week he called me that he can not fix... can I instal new rom without connecting with pc??? thanks

Flash from sd card.
trengy said:
I gave him a fix again and after a week he called me that he can not fix... can I instal new rom without connecting with pc??? thanks
Click to expand...
Click to collapse
You can flash via your sd card. Go to here to read up on how to do this and all the REQUIRED STEPS to do so.

wild
does it still charge from the usb port

I'm using android nand rom

how I can instal nand rom without connect with computer ?????
please help (((

I would try another USB cable or even simply another USB plug on my PC.
Or, to make sure it´s not my PC, try it with another PC.

trengy said:
how I can instal nand rom without connect with computer ?????
please help (((
Click to expand...
Click to collapse
You cant unless you..
a) Want WM6.5
b) Have CWR already flashed (For Android)
If your USB is broken you will need to get it fixed or get a new HD2.

usb is broken and nobody cant fix does not make sense to replace the usb cabel or tried another computer

I have installed MDJs_CyanogenMod7 nand rom.... so is no change to instal rom from sd without CWRecovery???

trengy said:
I have installed MDJs_CyanogenMod7 nand rom.... so is no change to instal rom from sd without CWRecovery???
Click to expand...
Click to collapse
No, not unless you want to put WM6.5 back on.

so how I can put wm 6.5 ???

trengy said:
so how I can put wm 6.5 ???
Click to expand...
Click to collapse
Go into bootloader (turn of the phone, press the vol down button and press the power on button at the same time, wait until four color screen appear and see at the white color part the text "Serial". Plug in to your PC and wait until the "Serial" changes to "USB". Now you can flash it with winmo
Goodluck

Thanks for your answer but I knew how to flash rom with computer without you help .... you should read the other coments...
I have broken usb

You will need to place leo.image onto microsim assuming you have card reader which you will need since your usb is dead.
Then hold volume up and down whilst briefly pressing power on button. Then boot up from microsim which has leo image on it.
Do a search here on xda forums. Lots of posts on this form of rebooting..
Good luck..

xlr8me said:
You will need to place leo.image onto microsim assuming you have card reader which you will need since your usb is dead.
Then hold volume up and down whilst briefly pressing power on button. Then boot up from microsim which has leo image on it.
Do a search here on xda forums. Lots of posts on this form of rebooting..
Good luck..
Click to expand...
Click to collapse
What the hell are you talking about??
a) its leoimg.nbh not "leo.image"
b) Its MicroSD not "microsim"
c) You dont hold volume up "and" down, you JUST hold volume "down".
d) You dont boot "from" the image you flash using it.
People like you just confuse n00bs more.

damged volume no up/down

im stocked with this situatin thank god with a nice energizer rom 3.5
where phone can load only magdlr and of corse cant navigate the menu.
1) there is any way to switch trough adb or file explorer or terminal emulator the menu 1 selection so that become ad recover????????
so i can access my recover and load other roms?
2) there is any way i can load other android roms installing them trough sd card? or replacing folders and files into internal card?
3) there is any way to load without bootloader clk instead of magdlr so i can use a touch recovery?
thanx for your help

htchd2fix said:
im stocked with this situatin thank god with a nice energizer rom 3.5
where phone can load only magdlr and of corse cant navigate the menu.
1) there is any way to switch trough adb or file explorer or terminal emulator the menu 1 selection so that become ad recover????????
so i can access my recover and load other roms?
2) there is any way i can load other android roms installing them trough sd card? or replacing folders and files into internal card?
3) there is any way to load without bootloader clk instead of magdlr so i can use a touch recovery?
thanx for your help
Click to expand...
Click to collapse
???????anybody

htchd2fix said:
1) there is any way to switch trough adb or file explorer or terminal emulator the menu 1 selection so that become ad recover????????
Click to expand...
Click to collapse
no
2) there is any way i can load other android roms installing them trough sd card? or replacing folders and files into internal card?
Click to expand...
Click to collapse
not as your phone is now
3) there is any way to load without bootloader clk instead of magdlr so i can use a touch recovery?
Click to expand...
Click to collapse
no, needs bootloader, bootloader needs voldown.

samsamuel said:
nonot as your phone is nowno, needs bootloader, bootloader needs voldown.
Click to expand...
Click to collapse
Never mind

Nigeldg said:
Actually, the bootloader doesn't need volume down: see this post. However, having never used cLK before I don't know whether or not the volume buttons are needed in here. If not, then it is possible to flash a new ROM.
Click to expand...
Click to collapse
Thanx,
i didnt think about reset....but are you sure i dont still neeed vol down??????
once i change to clk with a touch screen recovery i can do almost everything from there but i need to get to the 3 color screen...

htchd2fix said:
Thanx,
i didnt think about reset....but are you sure i dont still neeed vol down??????
once i change to clk with a touch screen recovery i can do almost everything from there but i need to get to the 3 color screen...
Click to expand...
Click to collapse
.............................

Nigeldg said:
Actually, the bootloader doesn't need volume down: see this post. However, having never used cLK before I don't know whether or not the volume buttons are needed in here. If not, then it is possible to flash a new ROM.
Click to expand...
Click to collapse
heh, go re-read the post you linked, , , ,what are the first three words?
hint
Hold Volume Down. Press and hold Reset until you see the BootLoader screen. Reset is the hidden button under the battery cover, lower left side below the SD card slot. You need a plastic or wooden stylus (toothpick will work). DON'T use a pencil, the graphite can get into the button and short it.
Click to expand...
Click to collapse
handy for a broken POWER button, but no use to volume button issues.
not to mention that he is asking to flash from sd in bootloader, and of course, even if you DO get into bootloader, you need to press the vol button to start the flash.
(Not like you to make a mistake, you're normally bang on the money, , , bad day? )

Hey guys,
I'm sorry I can't help or offer any solution, but reading again about a volume button problem just makes me confident that we need to have an option to boot into SPL from clk or magldr.
If I remember correctly, in WM 6.x we could do it using a little executable called "Enterbootloader.exe".
To tell you the truth I've tried ida-ing that *.exe, but I don't have the skills to make something out of it... maybe someone else could give it a try(?).
Nevertheless in the newer version of clk I added an option to navigate through the menu using fastboot commands (simulating volume keys, green button and back button).
Regards!

samsamuel said:
heh, go re-read the post you linked, , , ,what are the first three words?
hint
handy for a broken POWER button, but no use to volume button issues.
not to mention that he is asking to flash from sd in bootloader, and of course, even if you DO get into bootloader, you need to press the vol button to start the flash.
(Not like you to make a mistake, you're normally bang on the money, , , bad day? )
Click to expand...
Click to collapse
Haha actually a fairly good day, got some decent GCSE results for the first few things I've done. I guess when I posted that was before I got the results and I was, shall we say, bricking it (although not talking about phones here ) and probably not really thinking. Anyway, @OP sorry about that, I really dunno why I linked that without reading it properly but meh, I guess no harm done if you didn't flash anything yet (aside from maybe getting your hopes up slightly )

Nigeldg said:
Haha actually a fairly good day, got some decent GCSE results
Click to expand...
Click to collapse
Hah, makes sense your mind may be slightly occupied.
Good stuff, grats.

thanx friends.
unfortunally you still need vol down to skip magdlr menu....and boot into tricolor screen.
i guess im stocked with this rom unless i can short vol down mecaniclly i mean from hardware
insert battery and power up then remove short...

kokotas said:
Hey guys,
I'm sorry I can't help or offer any solution, but reading again about a volume button problem just makes me confident that we need to have an option to boot into SPL from clk or magldr.
If I remember correctly, in WM 6.x we could do it using a little executable called "Enterbootloader.exe".
To tell you the truth I've tried ida-ing that *.exe, but I don't have the skills to make something out of it... maybe someone else could give it a try(?).
Nevertheless in the newer version of clk I added an option to navigate through the menu using fastboot commands (simulating volume keys, green button and back button).
Regards!
Click to expand...
Click to collapse
I think is going to get stocked as many other apk like fastboot or reboot....they work but when phone reboot it will get into magdler menu not bypassing.

Go here and buy a new flex ribbon:
http://www.ebay.co.uk/itm/320935344...AX:IT&_trksid=p3984.m1438.l2649#ht_630wt_1139
Go here for a comprehensive video guide to strip down your phone and replace ribbon:
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
It looks daunting but with care and patience, it is relatively simple.
Good luck.

uphall said:
Go here and buy a new flex ribbon:
http://www.ebay.co.uk/itm/320935344...AX:IT&_trksid=p3984.m1438.l2649#ht_630wt_1139
Go here for a comprehensive video guide to strip down your phone and replace ribbon:
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
It looks daunting but with care and patience, it is relatively simple.
Good luck.
Click to expand...
Click to collapse
Thanx,
but not for me....
thats exactly why my phone is in this state right now.....

Major problems while installing different rom

Hello there!
I got HD2 today, it has windows installed on it and its Swedish.
Ive spent half of day trying to get it done but nothing worked.
I cant install HSPL to go on with the installation, Ive tried everything.
I connect my HD2 to PC and activesync does its work, I can see my mobile phone connected, adding new files works both on local and sd storage.
The problem comes in when I try to install HSPl so I could flash my phone and continue with the installation. Whenever I start HSPL isntallation my HD2 losses its connection with the PC and nothing happens. What could be the problems.
Whats the easiest workaround for this? I really want to install the android os on my phone, I dont like the windows one.
(I have searched the forums, nothing helped me)
MY DEVICE:
ROM v 1.o
Radio T8585
1024Mhz Cpu
Ram 576 Mb
Nand 1024 Mb
32 bit bus
Win mobile 6.5 pro
16 Gb mem card
Is there any other way to install android? Anything?
----------------------------------------------------
So I have tried doing same things today. I tried entering the bootloader using vl down and power up, ol down and reset key, left arrow and power key and the phone just starts my windows nothing. But when I press vl up, dwn and pwr key I get into 4 colour mode and it give me error: Copying file from SD card failed, system will shut down.
I will try to play around it a little bit, maybe try nativeSD somehow, but I dont think Ill manage anything. Help
----------------------------------------------------
When I use clrcad and haret on SDc it starts booting linux, progress bar goes to the end and stays there. Every time. Ive been waiting for some time for it to boot, but it jsut stays there.

Is there a way to get rid of this windows mobile crap easily? Do you think that mobile shops are willing to do this sort of stuff for you?

Try installing HSPL from the bootloader.Turn off phone, hold volume down rocker and boot up.

Marvlesz said:
Try installing HSPL from the bootloader.Turn off phone, hold volume down rocker and boot up.
Click to expand...
Click to collapse
Cant get into the bootloader, as said. I dont know why & whats causing it, but nothing is working as it should be

Ah, forgive me for skipping that part. I know this problem, and I've seen it many times.
Usually, I am not the one who fixes them, so here is one solution:
http://forum.xda-developers.com/showpost.php?p=25940714&postcount=3
Here's another:
http://forum.xda-developers.com/showpost.php?p=36420418&postcount=20
There are many, you need to search for them. I don't know which will work for you.

No help there, its still the same, no bootloader, nothing.
+
I cant seem to find fastboot anywhere in my settings.
+ My mobile is whole Swedish, I dont understand a thing, but I do manage to get around, but I still cant find fastboot like the one poster said that it might be the problem.
Im not sure whats the problem in the end. I feel that this phone is somehow locked, wont let me do such stuff, but I might be wrong, Im not really the kind of guy thats interested in developing phones, so I dont know most of stuff. Hope some more advices might come in.

Wait.. If it's swedish, why not go into settings and change language to yours (or to English)?
Also, you said "no help there". You mean the windows mobile application didn't let you boot into bootloader? I am quite sure you didn't even try it. It should work, trust me
But the question is: Once you're in the bootloader, and get rid of Windows Mobile, how are you going to go into bootloader again? (since there's no longer an app, or windows to RUN that app)

Marvlesz said:
Wait.. If it's swedish, why not go into settings and change language to yours (or to English)?
Also, you said "no help there". You mean the windows mobile application didn't let you boot into bootloader? I am quite sure you didn't even try it. It should work, trust me
But the question is: Once you're in the bootloader, and get rid of Windows Mobile, how are you going to go into bootloader again? (since there's no longer an app, or windows to RUN that app)
Click to expand...
Click to collapse
Well, for the language, I have been trying to change it, but I dont think its possible + Ive found multiple threads on forums about changing lng on windows mobile phone and they said that its not possible.
And for the bootloader, its not working. Seriously, I have been trying to do it for 2 days now. Using buttons, using random apps Ive found here on forums and none of them got me into the bootloader (expect the VL UP, VL DWN, PWR pressed together, which got me into four colour screen (which should be bootloader if Im right), but it turns off straight away if not connected with usb cable. If it is connected it stays at error as said in my first post). I wish I could get rid of the windows somehow so the bootloader would ask me for another rom or however that works, Im not much into it as said.

I somehow managed to get past the verifying the usb connection for HSPL installation, progress bar shows but it goes nowhere & after some time appears this error

buhamuha said:
... (expect the VL UP, VL DWN, PWR pressed together, which got me into four colour screen (which should be bootloader if Im right)...
Click to expand...
Click to collapse
No, that combination should get you into hard resetting your device and not into bootloader. Even if it does get you into the bootloader for a fraction of unit time, it won't allow you to flash anything. Volume down only is to get into bootloader
What happens when you follow this post? And by "what happens" I mean what error EXACTLY do you see?

Marvlesz said:
No, that combination should get you into hard resetting your device and not into bootloader. Even if it does get you into the bootloader for a fraction of unit time, it won't allow you to flash anything. Volume down only is to get into bootloader
What happens when you follow this post? And by "what happens" I mean what error EXACTLY do you see?
Click to expand...
Click to collapse
I have tried that thing yesterday. Didnt work. Tried it right now - it does nothing. I run the app and my phone just goes black (like when you tap the power button, lock or something) and it will stay like that without doing anything until i tap the pwr button to unlock it. Nothing really happens

I want to advise you install a ROM from sd card using the LEOIMG.nbh method. But I am not sure which ROM is for which device. (I never actually flashed my phone from sdcard). That might make the bootloader boot up (?). Also, can you confirm that the volume rockers work fine under windows mobile?
To be honest, I am out of solutions. We should wait for other people's.
Sorry I couldn't help.

Marvlesz said:
I want to advise you install a ROM from sd card using the LEOIMG.nbh method. But I am not sure which ROM is for which device. (I never actually flashed my phone from sdcard). That might make the bootloader boot up (?). Also, can you confirm that the volume rockers work fine under windows mobile?
To be honest, I am out of solutions. We should wait for other people's.
Sorry I couldn't help.
Click to expand...
Click to collapse
No problem man, thank you for trying.
Yes, my vol buttons work jsut fine, its just the thing I cant get into the bootloader, no matter which way I try.
LEOIMG method needs bootloader too, right? Or does it go with the clrcad and haret method? Haret doesnt work for me, starts booting stuff and than jsut stays at it

do exactly as i say and tell me what happens:
remove battery
remove sd card
plug in to pc via usb
hold volume down
put battery in
now you should be seeing the tricolor bootloader, right?

gilbert32 said:
do exactly as i say and tell me what happens:
remove battery
remove sd card
plug in to pc via usb
hold volume down
put battery in
now you should be seeing the tricolor bootloader, right?
Click to expand...
Click to collapse
I have no SD card slot, I think Its hidden somewhere under since its reading it both on PC & phone.
I have tried doing it without the sd card removal but nothing happens.
Where could I look for the sd card, its not on any side, its not under the battery, its not udner the other 2 romovables
--------------
UPDATE:
So I have opened my HD2 up and foudn the sd card under and I have removed it. DId everything you said and still nothing, my HD2 just boots up normally. No bootloader or anything. It seems like my bootloader is hidding somewhere

buhamuha said:
I have no SD card slot, I think Its hidden somewhere under since its reading it both on PC & phone.
I have tried doing it without the sd card removal but nothing happens.
Where could I look for the sd card, its not on any side, its not under the battery, its not udner the other 2 romovables
--------------
UPDATE:
So I have opened my HD2 up and foudn the sd card under and I have removed it. DId everything you said and still nothing, my HD2 just boots up normally. No bootloader or anything. It seems like my bootloader is hidding somewhere
Click to expand...
Click to collapse
this is really confusing. starting to sound like an hd2 clone to me...
can you open the back cover, remove battery and take a photo of the phone, then upload it here? (remove imei/serial/sensitive stuff from picture, using paint or some software )

gilbert32 said:
this is really confusing. starting to sound like an hd2 clone to me...
can you open the back cover, remove battery and take a photo of the phone, then upload it here? (remove imei/serial/sensitive stuff from picture, using paint or some software )
Click to expand...
Click to collapse
mhm could be the clone. Is there any way to do something about it if its a clone?

gilbert32 said:
this is really confusing. starting to sound like an hd2 clone to me...
can you open the back cover, remove battery and take a photo of the phone, then upload it here? (remove imei/serial/sensitive stuff from picture, using paint or some software )
Click to expand...
Click to collapse
buhamuha said:
mhm could be the clone. Is there any way to do something about it if its a clone?
Click to expand...
Click to collapse
I knew it!! I was going to say it might be fake, but deleted that line for some reason. Anyway, with those double sims trays, it's definitely a clone (unfortunately). How much did you pay for it?
Edit: Nope, not that much that can be done with a clone. You'd be lucky if you were able to even change the Windows Mobile ROM.

Marvlesz said:
I knew it!! I was going to say it might be fake, but deleted that line for some reason. Anyway, with those double sims trays, it's definitely a clone (unfortunately). How much did you pay for it?
Edit: Nope, not that much that can be done with a clone. You'd be lucky if you were able to even change the Windows Mobile ROM.
Click to expand...
Click to collapse
Got it for free, my aunt gave it to me. I dont know how much she paid for it. So I should leave it as it is, there is no possible way to change it?

As far as I know (and as my searching abilities go) no, you can't do much. I hope someone proves me wrong.