hi
i just reset to factory default in the settings. after that will the phone not boot up. It's just flashing the hero logo. And the PC can't connect to the phone no more(both in Windows 7 and Windows XP). The ROM are myhero 1.1.2, and works well in 2 months.
please, help me how do i fix it!
thank you in advance and sorry for the bad English.
hey did u find a fix i have the same problem!!
Same problem here myHero stucked after hard reset.
ROM myHero 2.5 , after hard reset , simply freezes on boot (exactly when the green androids apear). Cant use adb to flash it again cos it doesent find the devices. I dont know what to do my fone is bricked because I wanted to do a Hard reset!!!!!!!!!!!!!!!!
Unbelivable! Please someone help!!!
andre2pi said:
ROM myHero 2.5 , after hard reset , simply freezes on boot (exactly when the green androids apear). Cant use adb to flash it again cos it doesent find the devices. I dont know what to do my fone is bricked because I wanted to do a Hard reset!!!!!!!!!!!!!!!!
Unbelivable! Please someone help!!!
Click to expand...
Click to collapse
What makes you think that your phone is bricked?
If your phone was actually bricked then you would not be able to get into bootloader OR recovery. If this is not the case then you are not bricked.
I suggest to anyone having this issue to wipe your ext partition on your sdcard, clear and wipe your data, reflash your rom.
Why people don't perform nandroid backups really puzzle the hell out of me.
Related
sorry for the caps.
btw hello everyone
well lets just get to my problem.
i installed the touch it program rom thingy or whatever to my phone
and now im trying to restore it back to its original settings...
the only reason im doing that is because i cant connect the phone to the usb anymore. it WONT connect.
so im trying to restore it.
please help!
thanks!
or can someone just tell me how to reconnect it to my computer please?
i've tried different ports on the computer
and restarted it
but nothing, so please help me restore to factory settings or be able to use windows mobile device center
thanks!
maybe activesync didn't install properly when you flashed it..
or.. you should try the activesync uninstall/reinstall trick..
or a corrupt system file and you just have to hard reset the phone..
hmm..... good question
hard reset is when you press the clear storage right? or when u take out the battery while its still running??
well even if those arent hard resets i've tried them and none work
=[
A hard reset is preformed as follows:
-Hold down the two softkeys on the front of the device (the ones above the Windows logo and the OK button)
-Press the reset button using the stylus, which you can find below the volume adjuster on the left hand side of the device
-Release the stylus, but keep the softkeys held down
-You will see a warning screen
-Press the green send key on the left - the one with the phone icon on it to confirm the reset.
After that it will take a little while longer to start up the phone.
Btw if you by "original settings" mean restoring your official ROM a hard reset won´t do. You will need to flash the official ROM to go back if I´m not mistaken.
thanks for the info!
hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore
goodtilltomorrow said:
hey again
well im trying to restore the original rom but everytime i do it wont go past 1%
then touchit starts up.
help me please! i dont want touchit on my phone anymore
Click to expand...
Click to collapse
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?
knrubar said:
Did you hardSPL? What SPL / IPL version is shown on the multicolor screen?
Click to expand...
Click to collapse
Are you just trying to go back to the stock ROM becasue of the AS problem? Did you try a reinstall? After you uninstall before reinstalling AS go into your program files on the PC and delete the activesync folder.
If you HARDSPL'ed you need a STOCK ROM without the nbh. file. Thats why its kicking back to TOUCH.
Good Luck
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Your phone can be reflashed with Mtty even when it freeze on the boot screen cause its not necesary have the phone ON.
Tried to do a hard reset maybe is a windows registry problem.. after the hard reset the values on registry will be reset to default.
already done that, and doesnt work, even it reflashes through USB but afther reaching 100% the phone restarts and get stuck again in the same place, no matter if I hard Reset or reflash by USB the phone still get freeze.
can any one tell me how to delete all the data on the memory to make a clean reflash? or how do I reupload the firmware? is there a way to recover the phone?
remember I already install the WM5 and back to WM2003SE but after that the problem started, maybe i screw someting wile doing it?
Solaris_irc said:
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Click to expand...
Click to collapse
Tutorial for sd flash
Check here
Hey guys,
my topaz get stuck at the bootscreen and doesnt continue loading. I tried taking out the battery and then trying again, it didnt work. I tried both soft and hard reseting the phone but it doesnt work...anyone have a clue what i can do ??
SD-CARD ROM Flashing
Try to flash stock rom if you never used HARD-SPL (or any other cooked ROM if you did HARD-SPL) from SD-CARD, how: Let me Google that for you.
here's the story,
i installed rom manager from the market. flashed the clockwork recovery using it, then tried to flash a new rom using rom manager. i am sure that the rom is compatible with my settings. now my phone is in the boot loop and i can't get into recovery nor the bootloader. any help?
32a s-off
radio 6.35
2007 spl
i can only remember the basics of my device since i can't get into the bootloader...
THANKSSS
Did you pull the battery and then try booting into recovery/bootloader? If you get thrown into the bootloop when you put the battery back in, try holding back/home while putting the battery in.
Thanks for helping me! I actually did try that method but I was back to boot loop again. I really hate that "Rogers" screen.
Does that mean I'm bricked for good?
as it turns out, HTC makes magical device as it cured itself from the brick!!
i basically gave up and just left it running till the battery goes out, the next day, it is booted into the rom.
truly magical!!!!
True happened to me once when I tried to load my first rom. Just let it sit there while I'm searching the forums trying to look for some answers then voila it booted up properly
too bad i semi bricked it AGAIN!!! i really am bad at this...
flashed rogers official rom over cm. should have done some research first. still trying to fix it. but its not bad, learn a lot everything time i do something wrong.
Did you wipe prior to flashing a new rom?
Sent from my HTC Magic using XDA App
I've done the same mistake and my device hanged at rogers rom with radion 3.22 and SPL 1.76 S-ON. I've briked mine very bad that time, but yours might yet be recoverable. If you have s-off, the i think you're saved. Post your hboot info here...
Hi... I have similar problem... but my phone can't power on... in have samsung galaxy gio (GT-S5660M) after using rom manager... the phone reboot and can't start... nothings appear in the screen... I have only black screen... nothings appears
I try to remove the battery and put again... but nothing... I try to remove the sd card too and restart again... nothing... the cellphone not power on... I dont see any screen of logo, boot... nothing...
When I apple rom manager... the phone are disconnected (not charging)
Anybody can help me please ??
I dont know what happend :S
Hello.
I cant run my HD2, it show rom screen and thats all. How to restore to default rom? I have hspl 3 ... It happend after mgldr install What i can do to rapair it??
Is it any way to back to stock rom now? I cant open bootloader, only hard reset. ROM cant load... Please help me...
NOW ALL IS WORKING SORRY IM STUPID AND THATS ALL xD TO CLOSE