Hey guys,
my topaz get stuck at the bootscreen and doesnt continue loading. I tried taking out the battery and then trying again, it didnt work. I tried both soft and hard reseting the phone but it doesnt work...anyone have a clue what i can do ??
SD-CARD ROM Flashing
Try to flash stock rom if you never used HARD-SPL (or any other cooked ROM if you did HARD-SPL) from SD-CARD, how: Let me Google that for you.
Related
Hallo,
Please can anybody help me my phone dont boot after hardreset only the white HTC screen appears and nothing happends
what did you do?
falshing????
if you did - flash your language ruu from bootscreen and it will be back again....
Herald1981 said:
Hallo,
Please can anybody help me my phone dont boot after hardreset only the white HTC screen appears and nothing happends
Click to expand...
Click to collapse
False flashing
Indeed I this occured while flashing something went wrong.
Try reflashing with your original RUU.
If you can't get a pc-connection try using the flashing methode by using a micro-sd card (as i descriped in several fora).
If this occured while in use; try a soft reset. If it still isn't working take out your micro-sd card and perform a hard reset. It this doesn't work...reflash!
Help I cannot get my 8525 off the tri colored screen. I have been searching thru these forums but have not found the right combination.
It is set up for WM6 and att
did you press the reset button and it still comes back to this tricolor screen?
if resetting doesnt work, hard reset, if that doesnt work then yu may have to reflash os. My suggestion would be using the sd card method as all you need to do is be in bootloader with a fat32 formatted memory card and the .nbh file of your favourite rom installed on it and renamed to "hermimg.nbh". hope this helps...
stuck in bootloader screen
my phone...said no signal...I couldn't even open the phone pad ....then my sim did not show.....I tried soft resets several time.... nothing would help I noticed under device info it would not show radio version or rom version..... so I downloaded a fresh version or att 6.0 wm.. and tried that to see if it would help... while installing it stop @ 11 percent with error code.262 tried several times and nothing still same thing..... is their hope.... can I install a cooked rom... or is my phone dead I hope not but you guys are the best....can anyone please help......
dr71399, sounds as if your radio has had it... try to fix any bad blocks on your phone with MTTY first(do a search in upgrading for instructions) first then try to flash a radio only rom, if that doesnt work you should do a search for others that have had their radios corrupted and see what is suggested. Sorry to be the bearer of bad news but most people find once that happens its a brick, not that you cant flash an os only rom to use as a PDA.
If your phone is still under warranty then try to put the original rom back on and return for warranty but thats all I can think to do... See if a chef can fix up an os only rom for at&t or try to do it yourself.
I am afraid my Polaris bricked, but I hope somebody knows a solution. Let me explain:
I turned off my device to get my microsd card out. I put the card in my cardreader to fill it with a lot of music. After that I inserted the card in the polaris, turned on the pda, and I got into the bootloader screen .
I tried to soft reset: bootloader screen again, tried to hard reset: bootloader, tried to flash original rom: rom update complete and after that bootloader, tried to flash several cooked roms: rom update complete and again the bootloader. When I try to charge my polaris it automatically turns on and goes to the bootloader. Flashing with microsd doesn't work. I also tried the thing with mtty, but it doesn't show the usb option in the list...
I DID hard-spl, I was using udk diamond R8 and never had any trouble before, while flashing about once a 2 months. I really am desperate, because I am unable to charge the pda now. I searched well and I only found threads of people who forgot to hard-spl before flashing custom roms.
I hope someone comes up with a brilliant idea, I love my Polaris way too much working and I don't want it to be a nice looking pda that doesn't work anymore.
PLEASE HELP!
I now manage to get into the mtty application, but I don't know if it is a good idea to use it. The problems I found here which could be solved with mtty are different from my problem I think. What would be wise to do? I flashed various original roms, and radios. That seems to work as normal, but after flashing I keep returning in the bootloader screen .
I hope one of you has an idea what to do. If it is something that is involving risk, I think I should do it anyway, because in this current state my Polaris is useless.
a few ideas! maybe they can help!
1) do you have warranty? you can restore back to original spl and then get HTC to ix it!
2) Try flashing your phone without the MicroSD card in place, maybe with the stock HTC Rom
Another option - try to delete all files from your memory card.
Thanks for the replies.
1) do you have warranty? you can restore back to original spl and then get HTC to ix it!
I read the thread about restoring back to original spl. There is stated that you can't restore to original spl if you are stuck in bootloader...
2) Try flashing your phone without the MicroSD card in place, maybe with the stock HTC Rom
I tried a lot of times, but every time after flashing has finished, I return to the bootloader
Another option - try to delete all files from your memory card.
I formatted my memory card in fat32, tried to flash with sd-card. When I turn on the phone it shows about 0.5 seconds something like "no rom image" and returns to bootloader screen
My cruise is still stuck, and I really think about trying things in mtty as a last resort... Anybody who knows what commands I should give in mtty in this situation? All help is appreciated, and if a suggestion makes my polaris work again I will donate the brilliant xda-member 20 euro's!
I have the same fault and have not found a solution. Every time I soft reset I am stuck in the boot loader screen. If I switch off the phone using comm manager then soft reset the phone will boot okay.
The only method I have found to be able to boot properly is to leave the battery out overnight and then start the phone in the morning. Always boots without a problem this way.
To make matters worse the USB port on my phone is broken...
hi
i just reset to factory default in the settings. after that will the phone not boot up. It's just flashing the hero logo. And the PC can't connect to the phone no more(both in Windows 7 and Windows XP). The ROM are myhero 1.1.2, and works well in 2 months.
please, help me how do i fix it!
thank you in advance and sorry for the bad English.
hey did u find a fix i have the same problem!!
Same problem here myHero stucked after hard reset.
ROM myHero 2.5 , after hard reset , simply freezes on boot (exactly when the green androids apear). Cant use adb to flash it again cos it doesent find the devices. I dont know what to do my fone is bricked because I wanted to do a Hard reset!!!!!!!!!!!!!!!!
Unbelivable! Please someone help!!!
andre2pi said:
ROM myHero 2.5 , after hard reset , simply freezes on boot (exactly when the green androids apear). Cant use adb to flash it again cos it doesent find the devices. I dont know what to do my fone is bricked because I wanted to do a Hard reset!!!!!!!!!!!!!!!!
Unbelivable! Please someone help!!!
Click to expand...
Click to collapse
What makes you think that your phone is bricked?
If your phone was actually bricked then you would not be able to get into bootloader OR recovery. If this is not the case then you are not bricked.
I suggest to anyone having this issue to wipe your ext partition on your sdcard, clear and wipe your data, reflash your rom.
Why people don't perform nandroid backups really puzzle the hell out of me.
Hello,
I recently found back my hold HTC HD2 and when I tried to start it up..It just hangs on the HSPL/SPL coloured screen. When I first powered it up HSPL by Cotulla was on it and it always ran Android.
So I download the Stock Windows Phone ROM from the Internet and installed it, but it still hangs on the HSPL Screen. So I installed the Stock SPL but I didn't help..
Can someone please help me? I really want to use the phone again but it seems there is a problem. There still is a SD-Card in it which has 4GB...Can someone please explain me how to get the phone back to Stock windows phone?
Can someone please help me?
Try removing sd card.
If still same issue leave sd card out & reflash ROM from links below.
flash hard spl 2.08
http://forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028
flash htc rom
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
* If it a T-Mobile USA hd2 (red endkey & green callkey) then use that model ROM linked below
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
When rebooting also use the soft reset button next to battery & try it a few times if unsuccessful first time booting.
Maybe useful thread > http://forum.xda-developers.com/showthread.php?t=1344958
load of ROM links (working) , tools & HD2 useful info > http://forum.xda-developers.com/wiki/HTC_HD2
I had the same problem bro, do you want android or windows on the phone?
I want the original Windows Phone back on it.
Mister B:
I followed your steps but it didn't fix the problem. When I start up the phone, the three coloured display shows up and it says 'Serial' on the bottom. Tried the reset button several times and even holding down both Volume-buttons to Hard Reset the phone, but it didn't fix the problem.
The phone always worked fine, what is the problem?
Have you tried doing Task29(full wipe) via HD2 toolkit?
Yes, I already tried Task29 before flashing Hard SPL and Original ROM. I really want to get the Phone working again so my Mom can use it!
Hopefuly someone can help my out with this annoying and weird problem.
After installing the stock rom, what did the phone do? Did it restart to the HSPL screen?
Yes, it restarted back to the HSPL screen. It also shows 'Serial' on the bottom and when I connect USB cable It shows 'USB' on the bottom.
Try flashing stock rom from sd card rather than via usb & see what results you get.
I tried flashing the Stock ROM from the SD-card but it didn't help. It still is stuck at the SPL-screen showing 'Serial' on the bottom when I start up the phone.
Which exact ROM do I need to use for a Netherlands(Europa) HTC HD2 (NON-TMOUS!)?
I hope to hear back from you as soon as possible!
Can someone help me please? Tried everything!