Database Users

Serious HD2 00028002 error CAN"T USE PHONE!

Hello fellow HD2 users,
I've got an HD2 T-Mobile UK. I've just tried my luck with HSPL, I've succeessfully installed HSPL using the steps in this thread: http://forum.xda-developers.com/showthread.php?t=609477
However, when I copied the LEOIMG.nbh (1.48 offiicial rom) file to the micro SD 8GB card; and rebooted, things seemed ok untill it suddenly stopped the progress of flashing the ROM and gave me a Grey screen with the Error 00028002 "not Allow" sort of thing.
So I tried yanking battery out, rebooting normally, it displays a grey triangle with " ! " in the middle and then displays the 00028002 error then back to Tri colour bootloader, I noticed that the HSPL is gone and its back now to 1.42.0000
I even tried a Factory reset, it does the reset I reboot, but it still shows me grey triangle and same routine. I've tried everything now. This bloody T-mobile phone is just useless to me at the moment !
Can you please HELP !!! Thank you so much !
Regards !!

Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...

You cannot flash official ROMS from the sd because it replaces the SPL with a stock one. Presume it got half way through then decided the ROM was not for your device since it hasd replaced the SPL. Cooked ROMS are ok to flash from SD but for Stock use the RUU.

tell me it's working please.my HD2 from UK T-Mob is same "bricked" and in Slovakia is very very difficult to find somebody who can fix this....i think maybe only the HTC repair center

^
If your phone can load up into the boot loader (tri-color screen) your phone is not bricked.

Deeper Trouble:Same error,but cannot use USB!!!
Guys,
im in even much deeper **** now.I accidentally tried flashing a stock ROM via SD card and now ive gt the same ROM code error.What makes this worse is that my Vista computer is not recognizing any USB connection when i connect my HD2 to the computer.If i need to flash a stock rom via RUU wrapper to get through this stupid ROM code error, i need a USB connection at the first place...which IS NOT WORKING NOW!!!...im sitting duck here guys...i really really need your help on this one.im extremely frustrated and helpless.thanks alot...

When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.

samsamuel said:
When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.
Click to expand...
Click to collapse
Go to this thread Sam as kawshigan started a new thread

semo2010 said:
Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...
Click to expand...
Click to collapse
broken link

Reverting Back To Stock

Hi I've Instaled Canon Yang hspl..and rom but need to get back to stock my wife doesnt like the mod any help thnx in advance...

Which phone do you have:
The Blue phone is the Wing..
Any other color is the HTC Herald..
For Wing
For Herald
Download the appropriate Orig ROM and then connect your phone to the computer. Next, Go to soft reset the phone but hold the camera button in until you see a Red/Blue/Green/White screen. Look for the letters USB in the lower left hand corner. If you see this, then you can run the .exe file and the flashing will begin. Just follow the directions on screen.

Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj

Reflashing stock att rom

I have an HTC Surround that I cant get to boot past htc logo and if i try to hard rest it goes to spl screen. Where can i get the software to reflash it. I also have another microsd that i can change out if that is bad

still working on
So I replaced the mirco sd and tried to do the restore using the power and volume buttons and still would not get it to try and boot more then a few secs and stop at the htc screen. I also flashed the stock att rom that I got off xda but still no luck. My last chance is trying a new battery today are there any more suggestions

My surround did the same thing recently. It's a problem surrounds have. Unfortunately you have tried the 3 most common solutions.
1: reflash with stock rom
2: Change out sd card
3: hard reset
The only way I know of to get a working one after you have tried those 3 things is hope it's under warranty. :-/

jackkaiserwork said:
So I replaced the mirco sd and tried to do the restore using the power and volume buttons and still would not get it to try and boot more then a few secs and stop at the htc screen. I also flashed the stock att rom that I got off xda but still no luck. My last chance is trying a new battery today are there any more suggestions
Click to expand...
Click to collapse
Where did you get that stock at&t rom? I've been all through the developer section and all I see are telus and cingular roms. I've got a phone from the shop that's stuck on the htc logo and replacing the sd card hasn't fixed it. I tried to flash a telus rom because hey what the hell do I have to lose but RUU wasn't able to establish an ActiveSync connection on the htc logo screen looping repeatedly. Is there a way to force it into a sort of download mode from the htc logo to do the flashing from?

AT&T Surround ROMS
v1nsai said:
Where did you get that stock at&t rom? I've been all through the developer section and all I see are telus and cingular roms. I've got a phone from the shop that's stuck on the htc logo and replacing the sd card hasn't fixed it. I tried to flash a telus rom because hey what the hell do I have to lose but RUU wasn't able to establish an ActiveSync connection on the htc logo screen looping repeatedly. Is there a way to force it into a sort of download mode from the htc logo to do the flashing from?
Click to expand...
Click to collapse
Cingular is AT&T. I have flashed both of these ROMS to my AT&T Surround. Both work perfectly.
Pre nodo : http://forum.xda-developers.com/showthread.php?t=860842
Nodo : http://forum.xda-developers.com/showthread.php?t=1051579

Is there one for mango?
thanks

Thank you very much

bmamo said:
Is there one for mango?
thanks
Click to expand...
Click to collapse
depending on the spl version of your phone you can flash the cotulla rspl/hspl then flash the DFT rom, you will get mango full unlocked

rob243 said:
depending on the spl version of your phone you can flash the cotulla rspl/hspl then flash the DFT rom, you will get mango full unlocked
Click to expand...
Click to collapse
full unlocked as in developer or simlock unlocked?
thanks
Bernard

developer unlock sorry you will be able to sideload to your hearts content even install .xap directly from the browser on the device.

great, thanks!
I'm a bit new to windows phone but I learn quickly usually. could you help me a little bit more by telling me what exactly cotulla rspl/hspl, and DFT rom are? Is there a guide anywhere i could follow?
thanks again
---------- Post added at 02:33 AM ---------- Previous post was at 02:22 AM ----------
i'm guessing this should work:
C. Windows Phone 7 ROM Flashing Instructions
1. Unzip your downloaded *.zip file in a separate folder
2. Press and hold power-on/off button to power-off the phone
3. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
4. When your phone enters the tricolor screen bootloader mode, release volume-down button
5. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
6. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
7. After completion of (6.) above, check the usb message connection on your phone screen
8. To flash the new ROM go to your pc/laptop folder of (1.) above
9. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen

Do You still need help about this?
Basically you need to download DFT_RSPL_WP7FG2_LAUNCH from this forum, this will allow you to flash a custom rom. The ROM installed at the phone must be a NODO one because mango roms updates the loader and are not compatible.
For apply it you must put the phone on loader. Connect the phone to the usb, turn it off, turn it on but holding volume down key.
Once there you will see the 3 color screen and will say USB run the DFT_RSPL_WP7FG2_LAUNCH and follow the steps.
The phone will restart and showing again the 3 color screen but with HSPL now you can install DFT ROM. DFT ROM is basically a custom Windows Phone with the option to sideload apps you just run ROMUpdateUtility.exe from the DFT ROM downloaded and it will upgrade your OS to DFT Version.

Now what? SPL too high!
My brothers HTC surround has crashed, and fails to load the OS. i can get to the bootloader, but it's
spl-4.2.2250.1 (129185) MNG
i've got HSPL and RSPL, but they say DON'T TRY IF NOT 1.X SPL OR IF IT SAYS MNG. his says both. he was running mango, and i'm just trying to reinstall a stock rom. I'm wondering what advice any of you might have. I've reinstalled roms on Samsung devices, but not on an HTC, so i'm not sure what all this is about, or what the consequences are of proceeding. any help would be great.
Thanks dudes.

bump?
please?

Is it 1/2 bricked?
If you connect the device to a PC does it go to USB mode? At teh red blue green screen does it say USB at the bottom?

USB
It does display USB. If i leave it on for like an hour, eventually, i just discovered, windows DOES load, and it says "your memory is corrupt" it does connect to the computer, and it is detected by my pc, and it does display USB. I'm going to try to put in a new SD card, but i'm wondering once i do that, will i be able to flash the retail rom to it, with that spl.
thanks!

Check this thread http://forum.xda-developers.com/showthread.php?t=1597837.I believe you will have to downgrade your bootloader. I haven't tried this yet myself, I hope it helps you out.

need custom unlocked rom for my htc surround at&t
Hi.. Plz help I have HTC surround at&t unlocked device and I need to fully unlock
It so dat I can install apps from web without going to wp7 market.
And I want to flash it with custom rom..

my htc hd2 is STUCK.. HELP ME PLS

I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help

Before we start, you can ask him how his device has ended up like this, can't you?
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
Click to expand...
Click to collapse
Sir, you have forgotten your caps locked.
boxboy said:
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
Click to expand...
Click to collapse
Because you have stock SPL, you won't be able to install any custom ROM or any stock ROM not made for your region/SN.
boxboy said:
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
Click to expand...
Click to collapse
AFAIK, task29 is, also to be considered, a custom rom so it needs HSPL to be flashed. Are you sure you have followed the steps correctly?
boxboy said:
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
Click to expand...
Click to collapse
That is not a ROM, it's a radio. You need to flash HSPL to be able to change the splash screen (NRG Screen). HSPL should go like this: SPL 2.08.HSPL .
boxboy said:
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Microsoft is a corporation, Windows Phone is the OS .
One more thing, to be able to flash a LEOIMG from sd, the .nbh must be a rom that is compatible with your device (It will work if you get it from htc.com using the device's serial number)
I hope this helps. And I'm sorry if I am incorrect at something.
Good luck.
------------------------------------------------------------------------------------------------------------------------------------------------
To summarize it, you need to do either one of the following:
1- Install HSPL, and do what you want.
2- Go to HTC.com, download a rom using your Serial Number, rename file to .zip, extract the .nbh file, rename to LEOIMG.NBH [Capital letters], put onto sd card and insert into phone, boot up device while holding volume down ONLY, and make sure splash is removed and you're back to the "htc" stock, then send to repair [why?].

posting teh same post in multiple sub forums is considered rude
http://forum.xda-developers.com/showthread.php?t=1440265

Yeah, HSPL is needed for flashing pretty much everything. One thing you could do would be to flash a stock ROM from your SD card (just google it I CBA to provide links and stuff) which would reset everything to factory WinMo (including SPL to SPL3.03 [assuming you flash the latest ROM 3.14]) and from here it would basically be a fresh start. Probably the safest route without HSPL

Hi.
Thank you for your replies...
Let me tell u guys if I forgot to say earlier. The mobile phone is not letting flash any of the Hspl... be q series, 2 series or 3.series... all the times it says error 0000006 and 000000010 etc... a couple out of hundreds it did let flash but then it doesn't let me flash the factory rom fom HTC.

I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck

OK,
My final.outcome.
This phone let's me flash the hspl but it doesn't let me flush any roms including the original HTC factory rom.
I can also perform the task 29. Etc but still the NRG screen is still there.
I would like to know that if I flash the original Split and send it HTC, will be repairable for free? Sure? Even with the NRG.

now i think the only option available to you is jtagging the device which may permanently void the warranty !!
it had happened with me once, but somehow it got solved !
i used to randomly install clk, magldr, radios, hspl etc multiple times !
it used to get stuck while installing and then i used to remove the battery and try again !!
somehow it started ! !!
STRANGE DEVICE !!

Yeap its a real problem!!
Now , It will not let me change the hspl to spl whatsoever I do.
I would like your suggestions
I bought this brick for £50 and I can return it to get my money back. Has any used jtagging and does it 100% work?. The thing is if I do used jtagging, and if it doesn't work ,then I can,t return it!. How much does it cost and is it worth it?

jtagging will solve your problem !!
they remove the motherboard of the device and flash the os into the motherboard directly through a device named riff box !!
refer this video for more info !!
http://www.youtube.com/watch?v=zElsUERTzOU
but pls do not try this at home ! !!
just contact a local repair shop to jtag your device !!
also u can contact these guys from the video !!
good luck ! !!

boxboy said:
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
Click to expand...
Click to collapse
Check that the micro USB connection isn't "wobbly".
I had a TMOUS HD2 and never had any issues. Then, I sold it and got a Telstra HD2 and had big issues getting ROMs installed until I realized that the connection at the phone was a little weak. I can't send any updates to WP7 via cab sender unless the phone is in a certain position to keep the connection from breaking.

boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Don't worry ... you can give the life to your phone back... it shows fail bcus u have 2.08.0000.. so it means u Sud have 2.08 v hspl.. so try flashing hspl by getting into bootloader(3 colour) by pressing volume down + power Then flash hspl.. but remember select 2.08v.. then again after flashing hold volume down + power.. bootlooder.. then flash magdlr 1.13 ... now the phone will boot into a black screen with written mangdlr.. wen the black screen magdlr screen comes then press power off for 5mintzz.. follow the guide to flash.. there is a stick thread in NAND DEVELOP... U can get the windows version back to your phone to get the warranty...
Sent from my HTC HD2 using Tapatalk

Ok ,, some good new at last ..
I have used the HSPL4 to change my 3.03hspl to 3.030000 spl...
Success, as when i go to the tri colour screen it says spl and no hint of hspl...
Bad news, is that i still cant get the rom flashing,, as it gets stuff at some point and mostly at 99%.. Have tried both ways through SD (leoimg) and through USB.
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.

boxboy said:
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
Click to expand...
Click to collapse
did you try to flash just a splashscreen as i suggested in your other thread? (they can be flashed alone, no need for a whole rom, , just like radios)
if you can get a stock splashscreen on there you are sorted.

Maybe try to download the original Software from HTC.
With you serial number you can get the latest windows for this phone.
Flash the Software you get from HTC.
If this is working ok you can try to install any Android ROM.
Read at first this
http://forum.xda-developers.com/showthread.php?t=905841
Try to understand and follow the steps..
But if you have even no luck with original Windows soft. You will also (maybe) have a lot of probs. with Android..

Thank you guys for all your help..
I have flashed andriod on several phones some time ago and I actually forgot the right steps to follow.
But this phone is unique is not letting me finish.
After following all the right steps, i wasnt able to install a rom succesfully even after installing the HSPL... and I am also not able to install the factory rom from htc on either the hspl or spl settings.
But i now got rid of the NRG screen and I have also installed the spl 3.03.. When you on the phone, it displays software upgrade failed..
So I have now sent the mobile to HTC as it is under warranty. I will then re-flash andriod following the right steps and see what happens!
Thanks again!

My mobile came back from HTC with a week.. Looks like a brand new one!
In the letter it says the replaced IMEI, PCBA, FL BD, W/O_ REGIONAL_ID, LEO
WOW
GREAT PHONE... ITS MUCH FASTER THAN THE PREVIOUS ONE FOR SOME REASONS

HTC Screen Stucked - Nothing Works

Hello Guys.
My nephew has an HTC HD2 (I supose that). It is stucked on the HTC screen. I tried a lot of thing, but nothing works, i'm affraid to make it worst. If someone can help me.
Some informations.
I don't know if it was working with android or windows;
I can access the tri color screen holding volume down and the power button or the reset button on the back of the device;
I already made a hard reset (holding vol up and down and reset buttons) the process was ok but nothing changes.
I don't know what kind of HD2 is it. On the back of phone I have this: HTC HD2 T8585, on the next line some asian characters, next line CCAF093G0600T0.
I tried to put images but i can't, i'm new, so, only link adresses.
This is the image of my tri color screen
i.imgur.com/HtbtBCu.jpg?1
If I try Task29 from Toolkit I receive this error
i.imgur.com/569SjSn.png
I tried all HSPL (HSPL 2, HSPL 3 and HSPL 4) all kind of errors, but the persistent error on HSPL4 is Flow: 00006, Error: 00006, Unknow
If need some other information.. just ask.
Thanks in advanced.

If it has coloured call/end keys (red&green) then it a US T-mobile model
If all keys are white then it the standard model.
Your hd2 has been unlocked by xtc clip box or similar so cid is probably bypassed without need for HSPL .
I would remove sim card & memory card & try flashing a standard windows rom via usb & if fails try using the sd card flash method.
Worth checking windows drivers are installed or just reinstall WMDC (link in hd2 wiki), using sd method removes pc issues from the problem.
If standard windows rom fails try a custom windows rom such as energy as they contain no radio or spl so sometimes will flash fully when hardware nand issues cause full rom to fail .
working rom links & help can be found in hd2 wiki >
http://forum.xda-developers.com/wiki/HTC_HD2

Ohhh.. Very good informations.
My call/end keys are coloured, so, I have an US T-Mobile model, is right?
I forgot to tell, i live in Brazil.
Now, i'm using windows 10, is it possible to use with WMDC? I tried to find a compatible version but no success.
There is a possibility to manage this phone with windows 10?
Thanks.

First thing I would try is flashing the original US t-mobile hd2 rom via sd card method as removes your pc & w10 from equation ...
us t-mobile rom >
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
you will find guides on flashing from sd card if search or perhaps link in wiki !
---------- Post added at 04:53 PM ---------- Previous post was at 04:40 PM ----------
You should have most functionality of wmdc in windows 10, installing wmdc6.1 in compatibility mode of vista sp2 may help, also connecting device prior to wmdc install may load better driver resources perhaps !

Hello again..
I tried to install this ROM by SD card Method, but the screen shows a white background with the message Loading... and nothing more.
I tried by computer and after 1% I received an error informing that the image file is corrupted. Then, i tried another download site but the error was the same.
Any idea?
Thanks

Just to add more information.. I tried one more TMOUS ROM: RUU_Leo_1_5_TMOUS_2.13.531.1_Radio_15.39.50.07U_2.10.50.26_Signed_LEO_Ship same result, white screen with the word Loading... and nothing more.
I tried also two more ROM's:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship and
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Both with the same result. After press the power button to start the updating it begins the updating and failed on the first step.
Any idea?
Thanks.

flash from sd card >
http://forum.xda-developers.com/showthread.php?t=681317
if TMOUS rom does not flash try energy custom rom (such as one in my signature) and see if that does.

All these tries was made by Sd Card...
And with your Energy ROM.. the same thing. only white screen with a blue word "Loading..." and nothing more happen.
another tries?
Thanks

Besides trying another smaller sd card such as 2gb or 4gb & making sure nbh file in root of card & trying vis usb flash on a couple of computers you running short on options.
You could also try flashing just radio rom image & see what happens !

Please kindly help
Hello everyone.
I brick my htc hd2 leo english version in an attemp to change it to android but for some reasons it did not work on my device, I want to go back to the stock rom but i have search google including this forum for the stock rom but all i get is a dead links..
Please if anyone knows a working link to download the rom, should kindly post it here.
Thanks in advance.

working links >
http://forum.xda-developers.com/wiki/HTC_HD2#Official_ROMs_.26_Radios