Hello Guys.
My nephew has an HTC HD2 (I supose that). It is stucked on the HTC screen. I tried a lot of thing, but nothing works, i'm affraid to make it worst. If someone can help me.
Some informations.
I don't know if it was working with android or windows;
I can access the tri color screen holding volume down and the power button or the reset button on the back of the device;
I already made a hard reset (holding vol up and down and reset buttons) the process was ok but nothing changes.
I don't know what kind of HD2 is it. On the back of phone I have this: HTC HD2 T8585, on the next line some asian characters, next line CCAF093G0600T0.
I tried to put images but i can't, i'm new, so, only link adresses.
This is the image of my tri color screen
i.imgur.com/HtbtBCu.jpg?1
If I try Task29 from Toolkit I receive this error
i.imgur.com/569SjSn.png
I tried all HSPL (HSPL 2, HSPL 3 and HSPL 4) all kind of errors, but the persistent error on HSPL4 is Flow: 00006, Error: 00006, Unknow
If need some other information.. just ask.
Thanks in advanced.
If it has coloured call/end keys (red&green) then it a US T-mobile model
If all keys are white then it the standard model.
Your hd2 has been unlocked by xtc clip box or similar so cid is probably bypassed without need for HSPL .
I would remove sim card & memory card & try flashing a standard windows rom via usb & if fails try using the sd card flash method.
Worth checking windows drivers are installed or just reinstall WMDC (link in hd2 wiki), using sd method removes pc issues from the problem.
If standard windows rom fails try a custom windows rom such as energy as they contain no radio or spl so sometimes will flash fully when hardware nand issues cause full rom to fail .
working rom links & help can be found in hd2 wiki >
http://forum.xda-developers.com/wiki/HTC_HD2
Ohhh.. Very good informations.
My call/end keys are coloured, so, I have an US T-Mobile model, is right?
I forgot to tell, i live in Brazil.
Now, i'm using windows 10, is it possible to use with WMDC? I tried to find a compatible version but no success.
There is a possibility to manage this phone with windows 10?
Thanks.
First thing I would try is flashing the original US t-mobile hd2 rom via sd card method as removes your pc & w10 from equation ...
us t-mobile rom >
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
you will find guides on flashing from sd card if search or perhaps link in wiki !
---------- Post added at 04:53 PM ---------- Previous post was at 04:40 PM ----------
You should have most functionality of wmdc in windows 10, installing wmdc6.1 in compatibility mode of vista sp2 may help, also connecting device prior to wmdc install may load better driver resources perhaps !
Hello again..
I tried to install this ROM by SD card Method, but the screen shows a white background with the message Loading... and nothing more.
I tried by computer and after 1% I received an error informing that the image file is corrupted. Then, i tried another download site but the error was the same.
Any idea?
Thanks
Just to add more information.. I tried one more TMOUS ROM: RUU_Leo_1_5_TMOUS_2.13.531.1_Radio_15.39.50.07U_2.10.50.26_Signed_LEO_Ship same result, white screen with the word Loading... and nothing more.
I tried also two more ROM's:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship and
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Both with the same result. After press the power button to start the updating it begins the updating and failed on the first step.
Any idea?
Thanks.
flash from sd card >
http://forum.xda-developers.com/showthread.php?t=681317
if TMOUS rom does not flash try energy custom rom (such as one in my signature) and see if that does.
All these tries was made by Sd Card...
And with your Energy ROM.. the same thing. only white screen with a blue word "Loading..." and nothing more happen.
another tries?
Thanks
Besides trying another smaller sd card such as 2gb or 4gb & making sure nbh file in root of card & trying vis usb flash on a couple of computers you running short on options.
You could also try flashing just radio rom image & see what happens !
Please kindly help
Hello everyone.
I brick my htc hd2 leo english version in an attemp to change it to android but for some reasons it did not work on my device, I want to go back to the stock rom but i have search google including this forum for the stock rom but all i get is a dead links..
Please if anyone knows a working link to download the rom, should kindly post it here.
Thanks in advance.
working links >
http://forum.xda-developers.com/wiki/HTC_HD2#Official_ROMs_.26_Radios
Related
So my dad tried to flash another ROM on his HD2.
When you simply try to turn it on, it vibrates and the screen goes white and stays that way.
When you go to the bootloader, it looks like this:
http: //seven-days-later.de/bricked.jpg
(Sorry, I'm new here, and not permitted to post links.)
Any try to put any other ROM on it either fails with this, frozen:
http: //seven-days-later.de/freeze.jpg or the program doesn't even manage to connect via USB.
Flashing from SD either just won't work (the white screen lights up shortly and goes away, faster than I can see what it says) or exits with error '00028002 not allow', depending on the ROM we try to flash.
Our best guess is, since the device's internal name is not a valid identifier of an HD 2 (the strange characters on the first screenshot), the ROMs/bootloader doesn't allow them to be flashed. What do you think?
Does anyone have an idea how we can get the system working again?
Ok this is a new one for me, I have never seen this in bootloader before.
I will help you out with the links as others here need to see this, bricked.jpg and freeze.jpg.
Ok you say it will not show USB inm the white bar of bootloader, correct?
Do you have the latest version of ActiveSync (XP) or WMDC (Vista, Windows 7) installed on your computer? Go here if not or not sure. It has USB drivers for the HD2.
Do you know for sure you have a good USB cable?
When you tried to flash via SD card did you use a 4 gig or smaller SD card freshly formatted with a full wipe and Fat 32?
Also do you have a TMOUS (T-Mobile US) HD2 or a International HD2?
Edit: I see from the freez.jpg that you have a International HD2.
If installing the latest version of ActiveSync or WMDC gets USB in the white bar then down load HSPL 4 linked in my guide that I have klinked in my sig and install HSPL 3.03 then try to flash the ROM. You cas use HSPL to revert back to SPL if want once you have flashed.
Gunnsn said:
So my dad tried to flash another ROM on his HD2.
When you simply try to turn it on, it vibrates and the screen goes white and stays that way.
When you go to the bootloader, it looks like this:
http: //seven-days-later.de/bricked.jpg
(Sorry, I'm new here, and not permitted to post links.)
Any try to put any other ROM on it either fails with this, frozen:
http: //seven-days-later.de/freeze.jpg or the program doesn't even manage to connect via USB.
Flashing from SD either just won't work (the white screen lights up shortly and goes away, faster than I can see what it says) or exits with error '00028002 not allow', depending on the ROM we try to flash.
Our best guess is, since the device's internal name is not a valid identifier of an HD 2 (the strange characters on the first screenshot), the ROMs/bootloader doesn't allow them to be flashed. What do you think?
Does anyone have an idea how we can get the system working again?
Click to expand...
Click to collapse
looks like nand corruption... try redoing an original rom from sdcard
Seen this a few times,, corrupted deviceID meaning everything fails, including goldcard, since nothing recognises it as a hd2 so refuse to flash.
No advice for you, other than there are a few threads here with that issue, which you should hunt down and read (search for "corrupted device ID") and of course you should try everything, SD flash, goldcard, hspl,,,sadly I'm fairly sure none of them end well. I hope I'm wrong.
JTAG would maybe do it.
samsamuel said:
Seen this a few times,, corrupted deviceID meaning everything fails, including goldcard, since nothing recognises it as a hd2 so refuse to flash.
No advice for you, other than there are a few threads here with that issue, which you should hunt down and read (search for "corrupted device ID") and of course you should try everything, SD flash, goldcard, hspl,,,sadly I'm fairly sure none of them end well. I hope I'm wrong.
JTAG would maybe do it.
Click to expand...
Click to collapse
I am with Sam here on this one I think JTAG can correct the Device I.D. cause it has a direct connection to the NAND chip and allows you to run diagnostic software on the NAND chip then correct any problems as long as it is not any physical damage to the NAND chip.
PM me if you are interested in JTAG, I can put you in touch with someone that can do it and is a professional.
Hi
I used to have a win 6.5 roms
But this time i wanted to go back for win 6.1
So i did SSPL 1.14 and after flashing the rom
the color was light & very bad
also the touch screen stick on align screen (No response to touch)
I've tried hard reset & nothing happened
& i can't sync with the computer so i could come back to win 6.5
Any idea could help ?
Hi, have you tried with sd card ??
NO , But how ?
by renaming the rom file to BLACIMG.nbh (might be case sensitive), putting it in the root of the sd card and entering bootloader mode. every time you enter bootloader mode, there is a split second of white screen before it turns to the 4 colored screen, in this split second it searches for roms on the sd card, if there is one present, you will be given instructions on how to flash the rom directly.
actually, this is one of the most convenient ways to flash a rom, if you are using an alternative OS (like linux) and can't use classic RUU based flashing. however, it comes with the downside, that you can't perform a task 29 in advance.
also, as a general question, for going back to wm6.1, why would you flash spl1.14? once you installed hspl, you can run any rom from your device. i am currently using stock rom, but still i have hspl and the latest radio installed.
thank you
it works fine
i appreciate your help
Solution found, thread closed.
In future please post all flashing queries in the Dummies Guide thread which can be found by looking here
I have an HTC Surround that I cant get to boot past htc logo and if i try to hard rest it goes to spl screen. Where can i get the software to reflash it. I also have another microsd that i can change out if that is bad
still working on
So I replaced the mirco sd and tried to do the restore using the power and volume buttons and still would not get it to try and boot more then a few secs and stop at the htc screen. I also flashed the stock att rom that I got off xda but still no luck. My last chance is trying a new battery today are there any more suggestions
My surround did the same thing recently. It's a problem surrounds have. Unfortunately you have tried the 3 most common solutions.
1: reflash with stock rom
2: Change out sd card
3: hard reset
The only way I know of to get a working one after you have tried those 3 things is hope it's under warranty. :-/
jackkaiserwork said:
So I replaced the mirco sd and tried to do the restore using the power and volume buttons and still would not get it to try and boot more then a few secs and stop at the htc screen. I also flashed the stock att rom that I got off xda but still no luck. My last chance is trying a new battery today are there any more suggestions
Click to expand...
Click to collapse
Where did you get that stock at&t rom? I've been all through the developer section and all I see are telus and cingular roms. I've got a phone from the shop that's stuck on the htc logo and replacing the sd card hasn't fixed it. I tried to flash a telus rom because hey what the hell do I have to lose but RUU wasn't able to establish an ActiveSync connection on the htc logo screen looping repeatedly. Is there a way to force it into a sort of download mode from the htc logo to do the flashing from?
AT&T Surround ROMS
v1nsai said:
Where did you get that stock at&t rom? I've been all through the developer section and all I see are telus and cingular roms. I've got a phone from the shop that's stuck on the htc logo and replacing the sd card hasn't fixed it. I tried to flash a telus rom because hey what the hell do I have to lose but RUU wasn't able to establish an ActiveSync connection on the htc logo screen looping repeatedly. Is there a way to force it into a sort of download mode from the htc logo to do the flashing from?
Click to expand...
Click to collapse
Cingular is AT&T. I have flashed both of these ROMS to my AT&T Surround. Both work perfectly.
Pre nodo : http://forum.xda-developers.com/showthread.php?t=860842
Nodo : http://forum.xda-developers.com/showthread.php?t=1051579
Is there one for mango?
thanks
Thank you very much
bmamo said:
Is there one for mango?
thanks
Click to expand...
Click to collapse
depending on the spl version of your phone you can flash the cotulla rspl/hspl then flash the DFT rom, you will get mango full unlocked
rob243 said:
depending on the spl version of your phone you can flash the cotulla rspl/hspl then flash the DFT rom, you will get mango full unlocked
Click to expand...
Click to collapse
full unlocked as in developer or simlock unlocked?
thanks
Bernard
developer unlock sorry you will be able to sideload to your hearts content even install .xap directly from the browser on the device.
great, thanks!
I'm a bit new to windows phone but I learn quickly usually. could you help me a little bit more by telling me what exactly cotulla rspl/hspl, and DFT rom are? Is there a guide anywhere i could follow?
thanks again
---------- Post added at 02:33 AM ---------- Previous post was at 02:22 AM ----------
i'm guessing this should work:
C. Windows Phone 7 ROM Flashing Instructions
1. Unzip your downloaded *.zip file in a separate folder
2. Press and hold power-on/off button to power-off the phone
3. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
4. When your phone enters the tricolor screen bootloader mode, release volume-down button
5. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
6. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
7. After completion of (6.) above, check the usb message connection on your phone screen
8. To flash the new ROM go to your pc/laptop folder of (1.) above
9. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Do You still need help about this?
Basically you need to download DFT_RSPL_WP7FG2_LAUNCH from this forum, this will allow you to flash a custom rom. The ROM installed at the phone must be a NODO one because mango roms updates the loader and are not compatible.
For apply it you must put the phone on loader. Connect the phone to the usb, turn it off, turn it on but holding volume down key.
Once there you will see the 3 color screen and will say USB run the DFT_RSPL_WP7FG2_LAUNCH and follow the steps.
The phone will restart and showing again the 3 color screen but with HSPL now you can install DFT ROM. DFT ROM is basically a custom Windows Phone with the option to sideload apps you just run ROMUpdateUtility.exe from the DFT ROM downloaded and it will upgrade your OS to DFT Version.
Now what? SPL too high!
My brothers HTC surround has crashed, and fails to load the OS. i can get to the bootloader, but it's
spl-4.2.2250.1 (129185) MNG
i've got HSPL and RSPL, but they say DON'T TRY IF NOT 1.X SPL OR IF IT SAYS MNG. his says both. he was running mango, and i'm just trying to reinstall a stock rom. I'm wondering what advice any of you might have. I've reinstalled roms on Samsung devices, but not on an HTC, so i'm not sure what all this is about, or what the consequences are of proceeding. any help would be great.
Thanks dudes.
bump?
please?
Is it 1/2 bricked?
If you connect the device to a PC does it go to USB mode? At teh red blue green screen does it say USB at the bottom?
USB
It does display USB. If i leave it on for like an hour, eventually, i just discovered, windows DOES load, and it says "your memory is corrupt" it does connect to the computer, and it is detected by my pc, and it does display USB. I'm going to try to put in a new SD card, but i'm wondering once i do that, will i be able to flash the retail rom to it, with that spl.
thanks!
Check this thread http://forum.xda-developers.com/showthread.php?t=1597837.I believe you will have to downgrade your bootloader. I haven't tried this yet myself, I hope it helps you out.
need custom unlocked rom for my htc surround at&t
Hi.. Plz help I have HTC surround at&t unlocked device and I need to fully unlock
It so dat I can install apps from web without going to wp7 market.
And I want to flash it with custom rom..
My HD2 has no rom. Im able to access the bootloader, which says SPL-2.08.0000. I tried to install stock rom 2.10 and 3.14 from tmobile using 2gb MicroSD card, but phone gets stuck in the grayish screen saying "loading" or install in progress but actuall goes no where.
I can't do it via a USB connection because my computer keeps trying to install the device driver and it can't find it. So I think the MicroSD card is the only option buts its not working for me as I mentioned.
I'm new today to XDA, and dont know what other steps to take. Thanks in advance to all.
Update: At one point, it started the install and stopped with the message: Radio_v2 - RSA failed
The drivers you need fmto get the required HTC USB Synced connection in the bootloader is included in the Active Sync (for XP) and Windows Mobile Device Center (for Vista and Windows 7). Click on the guide linked in my sig as there is a link in the guide to the Microsoft site that has the both of them.
The radio fail message means it failed to install the radio version that is with the stock ROM so the install of the ROM was aborted. Maybe flashing via USB will work if not you may have a hardware issue.
I can't get my phone to load a rom either but I accidently tried to put a touch pro 2 rom on mines not paying attention so what I want to know is if their is a way to erase the memory for flashing I did a master reset with the phone off already anybody else ran into this problem if so do u know what I could do
sharnellbraden said:
I can't get my phone to load a rom either but I accidently tried to put a touch pro 2 rom on mines not paying attention so what I want to know is if their is a way to erase the memory for flashing I did a master reset with the phone off already anybody else ran into this problem if so do u know what I could do
Click to expand...
Click to collapse
The only thing I know of that you can do to "erase the memoy" as you said. is to one use MTTY or just a Task 29. Sorry I can not find the original tread on MTTY for HD2 but that one should still work for you. The best thing in my oppinion though is to just run a Task 29 as it is the easiest and does the same as the MTTY. plus jst so you know when you flash a stock ROM it runs a Task 28 (wich is pretty much the same thing, some do argue this fact though) before it flashes the ROM.
Go and check out recognized developer ksubedi's HD2 NAND Toolkit. It makes doing anything to the NAND ofthe HD2 very easy and simple, including Task 29.
Now the only concern I have is can you still get to the bootloader by powering on the HD2 while holding the volume down button down? Cause if not you you bricked the HD2 when you flashed the wrong ROM by accident. If you can you can still run th Task 29, oh and you have to have HSPL flashed to the HD2 to use the Task 29 also.
Hello,
I recently found back my hold HTC HD2 and when I tried to start it up..It just hangs on the HSPL/SPL coloured screen. When I first powered it up HSPL by Cotulla was on it and it always ran Android.
So I download the Stock Windows Phone ROM from the Internet and installed it, but it still hangs on the HSPL Screen. So I installed the Stock SPL but I didn't help..
Can someone please help me? I really want to use the phone again but it seems there is a problem. There still is a SD-Card in it which has 4GB...Can someone please explain me how to get the phone back to Stock windows phone?
Can someone please help me?
Try removing sd card.
If still same issue leave sd card out & reflash ROM from links below.
flash hard spl 2.08
http://forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028
flash htc rom
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
* If it a T-Mobile USA hd2 (red endkey & green callkey) then use that model ROM linked below
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
When rebooting also use the soft reset button next to battery & try it a few times if unsuccessful first time booting.
Maybe useful thread > http://forum.xda-developers.com/showthread.php?t=1344958
load of ROM links (working) , tools & HD2 useful info > http://forum.xda-developers.com/wiki/HTC_HD2
I had the same problem bro, do you want android or windows on the phone?
I want the original Windows Phone back on it.
Mister B:
I followed your steps but it didn't fix the problem. When I start up the phone, the three coloured display shows up and it says 'Serial' on the bottom. Tried the reset button several times and even holding down both Volume-buttons to Hard Reset the phone, but it didn't fix the problem.
The phone always worked fine, what is the problem?
Have you tried doing Task29(full wipe) via HD2 toolkit?
Yes, I already tried Task29 before flashing Hard SPL and Original ROM. I really want to get the Phone working again so my Mom can use it!
Hopefuly someone can help my out with this annoying and weird problem.
After installing the stock rom, what did the phone do? Did it restart to the HSPL screen?
Yes, it restarted back to the HSPL screen. It also shows 'Serial' on the bottom and when I connect USB cable It shows 'USB' on the bottom.
Try flashing stock rom from sd card rather than via usb & see what results you get.
I tried flashing the Stock ROM from the SD-card but it didn't help. It still is stuck at the SPL-screen showing 'Serial' on the bottom when I start up the phone.
Which exact ROM do I need to use for a Netherlands(Europa) HTC HD2 (NON-TMOUS!)?
I hope to hear back from you as soon as possible!
Can someone help me please? Tried everything!