Related
Hi guys!!
Is there any way to full format htc hd device without using task29?
Two weeks ago I flashed ROM via SD card, and since then ActiveSync doesn't work and I can't establish connection with my HTC HD and computer.
Now I can flash ROM only through an SD card. When I get into Bootloader mode does not recognize USB, but remains on the Serial....
Hard reset does not help because it only erase contacts, emails and other crap. I need something to wipe the device.
Any possible ideas??!!! Please....
didnt you by any chance disable USB connection in your activesync settings?
check that, maybe that prevents you from connecting...
if that's not the case, try updating your drivers...
if that fails, then AFAIK Task29 is the only way to format your device...
I tried to change everything in USB2PC and it didn't work. I took the device to servis and the repairman told me that he doesn't know what is the problem. He thought that maybe some port is broken or something like that and will replace it but none of that. Everything in device works fine. That he told me.
I think I made a mistake. When I flashed ROM via SD it all went great but in the end (after message: update complete 100%) I didn't make a soft reset. Instead I pulled the battery out to re-started device. Could it be the reason?!?!
So this AFAIK task29... what does it mean?!?!
how can i do this?! can you be more specific, some steps or something... please
and thank you for reply
oh yes, and i forgot to mention, when I connect device to PC it start to chargining battery normaly so can't be problem with USB cable as well
be sure to check your activesync or Windows Mobile Device Center settings...click the settings for mobile device or similiar and make sure Allow USB connection is checked...
AFAIK means "as far as I know"..
Task29 is a process with which you can completely erase your system partition...this little process solves a lots of issues..
Let me help you out.
First of all, connect your phone via USB to computer in bootloader.
Run USPL
Download the attached package - it is Task29 with Blackstone Radio 1.17
Extract archives and run Task29.exe
Follow the instructions - it is the same as flashing process
After task29 your phone will reboot but wont boot because there is no OS.
Take out battery and get into bootloader again.
Connect to PC via USB, run USPL and flash your favorite ROM.
I recommend Topix or Duttys.
Let me know if this worked out for you.
PS: Sorry that there are so many archives but I could not get it to smaller size
PS: Also do not forget to backup the data!!! this erases completely everything...
Sopis said:
be sure to check your activesync or Windows Mobile Device Center settings...click the settings for mobile device or similiar and make sure Allow USB connection is checked...
AFAIK means "as far as I know"..
Task29 is a process with which you can completely erase your system partition...this little process solves a lots of issues..
Let me help you out.
First of all, connect your phone via USB to computer in bootloader.
Run USPL
Download the attached package - it is Task29 with Blackstone Radio 1.17
Extract archives and run Task29.exe
Follow the instructions - it is the same as flashing process
After task29 your phone will reboot but wont boot because there is no OS.
Take out battery and get into bootloader again.
Connect to PC via USB, run USPL and flash your favorite ROM.
I recommend Topix or Duttys.
Let me know if this worked out for you.
PS: Sorry that there are so many archives but I could not get it to smaller size
PS: Also do not forget to backup the data!!! this erases completely everything...
Click to expand...
Click to collapse
OR You can try to flash a Stock ROM from SD ... probably works like Task29
Try using MTTY. Check firs for bad blocks. There is a command that will format the device.
Check Hermes WIKI, there are a lot of explanations about MTTY and how to use it. Also there are explanations about commands. Just be careful, you can destroy your device.
As far as I know mtty works on all win devices.
Cheers
I can't use anything...
The device can't recognize USB when I connect usb cable with it (it stays on SERIAL in bootloader), so I can't use task29, MTTY or similar applications or even flash new rom with RUU.
I think there is a malfunction on motherboard.
I tried to flash a stock rom with stock SPL 1.14 and this what happened:
It stays in bootloader mode with this error report
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again (in green field)
I tried to flash stock rom again and I get error code 00028002.
Stock ROM can't be flashed through SD card so now I can't use my guarantee......
so what do you do next to fix ..sorry my ingles
sollution!!
delete your previous connections in activesync, and then you need to HARDSPL your device, and after that you will be able to install romms from your sd card
there is a Thread for Task 29 for the Blackstone, please refer to it to minimize
redundancy.
jigners said:
there is a Thread for Task 29 for the Blackstone, please refer to it to minimize
redundancy.
Click to expand...
Click to collapse
As per above post, please use existing Task29 thread
Thread closed
Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2
GeneralWoo said:
Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2
Click to expand...
Click to collapse
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?
Simple,
Get to the tri color boot screen (vol down + power button)
Flash your win 6.5 ROM.
Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!
Hewarmsjeans said:
Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!
Click to expand...
Click to collapse
Just keep your phone unplugged and put it in bootloader mode. After a few seconds, the bottom part of the screen should say serial. Once it says that, plug it into your computer. Serial should change to USB in a second. If your computer doesnt have a driver for it yet, it should install that. Once its done, and once your phone says USB on the bottom of the bootloader screen, you should just be able to run the rom installer on your computer and install it. Good luck!
Thanks for you help, I managed that fine, though I had also wanted to remove the Hardspl I had used to add WM7. I have tried flashing the stock ROM back (via SD card and via USB) to overwrite it, however it fails to install correctly and the phone is being very unstable. Any suggestions!?
According to the thread I used to flash HSPL to my phone, you just make sure youre running a stock rom, then run the HSPL program like you did when you first put on HSPL, but choose 2.08.0000 in the selection screen.
That said, I havent removed HSPL so Im not entirely sure what to do if that doesnt work. If thats what you tried, Im not sure what to tell you
Have tried fiddling again and think I have done it! In the boot screen it now says SPL-2.08 (hopefully this is stock!?) and the phone seems to be behaving! Cheers for your assisstance
Yup, thats stock. No problem
peace warhead said:
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?
Click to expand...
Click to collapse
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.
SMS92 said:
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.
Click to expand...
Click to collapse
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7
peace warhead said:
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7
Click to expand...
Click to collapse
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear
imanh said:
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear
Click to expand...
Click to collapse
Hmmm I actually havent tried that yet, Ive done pretty much everything aside from reinstalling windows and stuff. I shut off my wireless during the process though because I turned off my antivirus and firewall. Hopefully that will work. WP7 is nice even without being activated, but it certainly doesnt come with many apps.
Okay Guys I need help...i have the htc hd2...i put android 2.2 nand on there few months back....wanted to try WP7 hate it...problem is I can not get it to go back to 2.2 I can install it..I get usb connection problems..then it reads it as a cdma device and lables it as leo70 ..Need detailed help asap thanks in advance.
michael8780 said:
Okay Guys I need help...i have the htc hd2...i put android 2.2 nand on there few months back....wanted to try WP7 hate it...problem is I can not get it to go back to 2.2 I can install it..I get usb connection problems..then it reads it as a cdma device and lables it as leo70 ..Need detailed help asap thanks in advance.
Click to expand...
Click to collapse
You aren't trying to flash it while you're in wp7, are you? I don't see why else it would label it as a leo70. You flash while in magldr... go to the flash option in magldr, then flash the android rom. If you're doing it that way, then please state exactly what you're doing so we can figure out if you're doing anything wrong.
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
zarathustrax said:
You aren't trying to flash it while you're in wp7, are you? I don't see why else it would label it as a leo70. You flash while in magldr... go to the flash option in magldr, then flash the android rom. If you're doing it that way, then please state exactly what you're doing so we can figure out if you're doing anything wrong.
Click to expand...
Click to collapse
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
Sounds like there's a problem with the driver. Reinstall windows media center and see if your phone is properly recognized by your pc.
Otherwise, you could try restoring winmo 6.5 directly via sd card. Google how to do this, as I'm replying using my phone and it's a tad difficult to search the guide for you.
michael8780 said:
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
Click to expand...
Click to collapse
Like person above said, make sure all drivers have successfully installed... also make sure you're giving it administative rights when running flasher. I know sometimes when I flash, the administrative permission window doesn't pop up the first time and then it gives similar errors like you're stating. If it still doesn't work, then try reflashing magldr by holding vol down when you turn on to go to bootloader, and flashing magldr installer. Might be a good idea to task 29 it, too.
zarathustrax said:
Like person above said, make sure all drivers have successfully installed... also make sure you're giving it administative rights when running flasher. I know sometimes when I flash, the administrative permission window doesn't pop up the first time and then it gives similar errors like you're stating. If it still doesn't work, then try reflashing magldr by holding vol down when you turn on to go to bootloader, and flashing magldr installer. Might be a good idea to task 29 it, too.
Click to expand...
Click to collapse
hey guys, i have the same problems machael8780, win7 treats HD2 as a CDMA device.
and i cant get it into usb mode.
i entered MAGLDR(ver1.13), choose 5 usb flasher mode, and stop there.
after that i make hd2 into 4colors screen with use connected, and i reinstalled MAGLDR 1.13. the process is ok.
but i still cant get HD2 into usb mode successfully.
Come on guys help here we are stack to win 7 !!!....a guide to go back to android please.....
110718 said:
Come on guys help here we are stack to win 7 !!!....a guide to go back to android please.....
Click to expand...
Click to collapse
So when you guys go in to tri-color "serial" doesn't change to "USB"...
Sent from my LG-P999 using xda premium
No..doesnt...windows dont see sd...
Hi
I currently have w7 on my htc hd2 and im trying to revert back to win 6.5.
ive downloaded this stock rom RUU_Leo_TMO_UK_1.43.110.2_Radio_Signed_15.26.50.07U_.
Phone booted into USB Flasher (Hold Power down, Option 5, End call Button.
But it sits at Wait Usb....USB and doesnt move.
What am i doing wrong??
Please help?
Thanks
You need to enter bootloader. Shutdown phone and power on while holding volume down. It will be the tri color screen. Attach USB then run 6.5 rom update
Sent from my HD2 using XDA Windows Phone 7 App
Another option would be to flash the ROM via SD card method.
This way, everything will be set back to factory status.
tictac0566 said:
Another option would be to flash the ROM via SD card method.
This way, everything will be set back to factory status.
Click to expand...
Click to collapse
indeed, you should always use SD method when going back to stock, it will correct most issues and will bring your phone back to how it was when you got it, remember to install HSPL again if you intend to tinker with it some more, SD flash will remove Magldr and HSPL and will also change the radio, spl and ROM
search the forums for how to SD flash, theres plenty of them, infact most of them would have came up in the "suggestions of previously started threads" box when you make this thread!
flashing via bootloader is more reliable, sometimes flashing via sd image is not recognised.
timmymarsh said:
flashing via bootloader is more reliable, sometimes flashing via sd image is not recognised.
Click to expand...
Click to collapse
More reliable but less effective
dazza9075 said:
More reliable but less effective
Click to expand...
Click to collapse
lol, says you
ive had issues previously releasing the keys at a certain time to get the "image" to be recognised, but it does work.
Call me old fashioned, but ive been flashing via bootloarder for many years, sometimes old habits are hard to beat lol
Anyway, both work, take your choice
Hi to all,
I am a noob , i tried to install Android on my HTC HD2 TMO(US) , but after all the Installation i was getting an Error 1E Fatal Error , i am trying to atleast revert back to Windows 6.5, so i downloaded the Official ROM Upgrade from the WebSite the name is T-Mobile_HD2_MR_Software_2.13.531.1.exe and it installed properly without any errors, but all i can see is White Screen Now, does this Installation include OS also or should i install windows 6.5 seperately, please help me
thank you
My phone got a little liquid on it and after that it frozen so I did a soft reset and now my phone is freezing on android boot screen every time. The problem is what my MAGLDR is not working properly now too and my ClockworkMod Recovery is not working at all, so I don't know how to reinstall soft now. The MAGLDR is kind of flashing always and its hard to control as sometime its not reacting to my button push. And then I try to go into ClockworkMod Recovery its just starts loading, does that 1234 go and it freezes on it, every time. But besides all this stuff my phone looks like working fine, just looks like it just has some software damage. I think it should work with a new soft if not at least I can send it to my insurance as I will change a soft back to normal, because now my insurance will not fix my phone as it freezes on android boot screen so whey will see that I have android and not windows. Waiting for any good advice. Thank you
Btw. My original boot loader is not working too, I can't get in to it. I think its because of the android.
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
A.J said:
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
Click to expand...
Click to collapse
That's what I waned to do, but last time when I tried to connect it my computer couldn't find my phone. That's why I'm asked for a help here. I will try to connect it later today, after I come back from my work and I will post it here, if its connects or not
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Sw1pe said:
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Click to expand...
Click to collapse
'USB mass storage is working fine'
You may be able to flash a stock ROM from the SD card but I think it involves the bootloader. Have a look at This thread and see if it helps (I CBA to read it properly, sorry )
Thanks, but yes it involves the bootloader
Does Bootloader normally work if MAGLDR & ClockworkMod Recovery is installed on device?
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
A.J said:
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
Click to expand...
Click to collapse
Yeah that's a good point. If you can, trying PCs with different versions of Windows could help (i.e. XP, Vista, Windows 7 etc.)
Ok so I managed to connect my phone via USB Flasher on my work computer and I installed "[30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM" without any problems but my phone still stucks on DFT Boot screen. I also tried to reinstall MAGLDR and ClockworkMod Recovery to get Clockwork Recovery work but it didn't work, it didn't change anything. Does any one have any ideas what can I do next? Is it possible to install wm 6.5 via USB Flasher? As I know it needs bootloader Does any one have more ideas how to fix it?
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
A.J said:
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
Click to expand...
Click to collapse
I can't! Because wm 6.5 requires connection between bootloader or active sinc, there is not other way when instaling wm 6.5, and none of them work now on my device
take a look here, we have the same issue too... http://forum.xda-developers.com/showthread.php?t=899628&page=7