Related
Hello everybody,
i have major problems after trying to flash bepe rom 0.66. The rom before flashing was bepe 0.59. The flashing finished fine, but after automatic restart, the windows mobile failed to boot, it stuck on green WM6.1 screen. After all, i tried to hard-reset my device, but nothing helped.
I can enter bootloader, but it is bootloader version POLA200 SPL-1.25.0000. When i try to flash ram, the flashing stucks at 0% and the error 262 occured.
So i have no idea what to do, and how i can reanimate my polaris. I have some questions, in another thread i have read that it isnt possible to flash the rom with this bootloader, i have to install the HardSPL, but i dont know how i can install hardSPL?
Another question is, can i flash the original rom without hardSPL?
Incubant said:
Hello everybody,
i have major problems after trying to flash bepe rom 0.66. The rom before flashing was bepe 0.59. The flashing finished fine, but after automatic restart, the windows mobile failed to boot, it stuck on green WM6.1 screen. After all, i tried to hard-reset my device, but nothing helped.
I can enter bootloader, but it is bootloader version POLA200 SPL-1.25.0000. When i try to flash ram, the flashing stucks at 0% and the error 262 occured.
So i have no idea what to do, and how i can reanimate my polaris. I have some questions, in another thread i have read that it isnt possible to flash the rom with this bootloader, i have to install the HardSPL, but i dont know how i can install hardSPL?
Another question is, can i flash the original rom without hardSPL?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1983845&postcount=4
i have tried this, but it changed nothing, always stuck in green WM6.1 Screen or by 0% flashing with error [262].
I'm not sure it works but you can try flashing hardSPL by microSD.
Take a microSD and format in FAT32, rename RUU_Signed.nbh in POLAIMG.nbh, insert microSD in Polaris, put it in bootloader, press the power button, it takes some seconds to start, wait.
If it works you can after flash the ROM with the same procedure.
Thanks for all replies!
This is a good idea batista, but i have some questions to this procedure.
Which rom would you take? first hard-SPL and after that a cooked rom?
How i can see that it works, cause you say you dont know wheather it works? Have you made experience with flashing from micro-SD?
Flash before HardSPL and after a ROM, i've Bepe 0.65 ITA.
You can see if it works if after you can flash a ROM, i've never flashed by miscroSD 'cause i've a PC with XP and i prefer to flash via usb but a lot of
people use to flash via microSD.
Trying to flash rom from microSD, has no satisfying effect as well. It stucks on a white screen with blue label "Loading...". Maybe its because 8GB microSD card and it is not able to load a rom from that one.
Please, i am happy about every post. Because i wont have destroyed 450 €
Do you format microSD before ????
Can you try with another one ????
If in FAT 32 doesn't work try in FAT 16.
No i cant try it with another one, but ordered another one on amazon, so on wednesday i hope i can try with another one. Formating with FAT16 is also impossible, i have no such choice in windows XP, but i think FAT32 would be the right one.
I think the main problem is, i have not installed hard SPL, but i dont know how to install without connection to windows xp. And i havent found any thread where it is mentioned to install hardSPL without connection to windows xp.
Have You tried to flash hardSPL via microSD or not ???
Same procedure of ROM flashing.
yes both hardSPL and direct bepe 0.66 but none of them worked. both stucking on loading... screen. Maybe there is a problem with 8GB hc micro sd?
Remove microSD and SIM and try flashing hardSPL via PC with Polaris in bootloader.
i also tried this, but it stucks on 0% updating and on windows xp the 262 Update Error appear. I will give this one a retry tomorrow. But i am not very hopefull.
I'm really sorry, i hope someone has a solution for your problem.
another user named sassa80 had exactly the same issue like you. he did not HardSPL first and tried to flash a new radio rom. the story ended with a RMA return of his HTC.
Hi Incubant,
You may try to flash an *original* ROM renamed to POLAIMG.nbh trought microSD. I used that procedure with a Sandisk 16GB, FAT32 and it worked ok. Before that, mine were kind of bricked on the SPL loader.
I think the step I may have missed the first time was to unplug and replug usb cable the first time I run the update on windows, right after the reset when on the palm screen it said to do so (after all on windows, the application were telling to *not* unplug the cable for 10 minutes). Anyway, if I recall correctly, I failed to update the SPL and at the end of flashing a beta of 6.1 it stopped at 99%. So... I was stuck - couldn't reflash anything. Nevertheless, the procedure that I mentioned on the first paragraph did solve it. After that, I had no problem installing the HardSPL and any other ROM.
Good luck
Another one here with the same problem.
Tried everything I can think of and still stuck on the 6.1 boot screen.
The people who are having problems above with the latest flash e.t.c, which brand of device you using? XDA Orbit II?
For me, it's an O2 Orbit II.
~J~ said:
For me, it's an O2 Orbit II.
Click to expand...
Click to collapse
I thought you might say that, I also have an XDA Orbit II and have noticed a different set of behaviours under the same conditions as compared to the HTC Touch Cruise users. It appears that an Orbit II and a Touch Cruise are both a Polaris but an Orbit II is not a Touch Cruise if that makes sense. Apart from the quite apparent visual differences between the two, are there any internal differences we are not aware of? The Orbit II always appears to act differently, some tweaks/roms/advice have outcomes different to the touch cruise, especially certain reg tweaks.
From using the latest bepe ROM it appears to be quite buggy, also reported by other users, look at bepe ROM thread. Hopefully bepe which deal with the bugs because his ROM, in my opinion, is by far the best.
I too had the STUCK-AT-GREEN-SCREEN issue when I flashed the latest ROM, I waited about 5 minutes, then HARD-RESET, then when presented with the GREEN-SCREEN again for a few minutes, I pressed one of the upper buttons (green phone / red phone).
I hope you sort the problem out.
hi guys..
please help me .. i flash my HTC HD2 with a MAGDLR111 and after it doesnt continue to boot and only stock in boot image. i try to use Hard Reset (holding down the up and down botton and tapping the power button), it response very quick but it says the "restore completed and press up botton to reboot" and so i did but still, it still stock up in boot image forever.. please help me, what should i do..thanks
Possibly a radio problem. Boot pressing volume down button to get into bootloader and flash a radio WITHOUT .51. in its name....
Sent from my Nexus One using XDA App
thanks, already did... and it works.. )))
hey i have that same problem now can you help me get a radio so i can download it or can even help me through the steps to get back my phone to normal plzzz.? thank you
Any new user most definitely has a lot of questions...
Here is a thread you should carefully check - it explains some basic stuff, and it offers links to many other specific threads, incl. Radio ROM.
To return to "normal" ROM, please just check the standard flashing process. You can flash via USB or SD card, whatever ROM you like, stock or custom.
Hey man thanks for all that but i really don't want just any rom, i wanna know if anyone can get me the rom that comes with the phone for windows mobile 6.5, you know with the orange load screen etc, i really dummy in this thing and i should not of even played fast to go try flashing my HTC HD2 with a MAGDLR111.
so i've tried various roms and everyone of them was going great unitl step 2 in the upgrade process, it kept saying error filr open, check update rom utility. where do i go from here?
It is quite difficult to help if there is so little basic information available.
The error you mention can have a simple reason. Usually, the ROM image file name is simply not correct.
To flash via USB:
There are 2 options:
First, you can take an original RUU of your network operator (in case you have a branded phone) or HTC, put the phone into boot loader mode (see below), start the RUU.exe on your PC.
Second, you can extract the original RUU.exe with WinRar or a similar program, take the .nbh file and rename it to leoimg.nbh.
Once you take an image of the ROM, you have to put it into the very same folder where your ROM update software is (LeoCustomRUU, SSPL, whatever). One more time, please check the suffix, it should be .nbh, as in "leoimg.nbh".
Keep in mind: Do start the RUU software as "Admin" - whichever you choose.
Instead of the original ROM, you can flash custom ROMs, too - since your device must have HSPL installed when you used WP7 or Android before.
If you´ve got issues (because of Win 7 on your PC or such), please try to put your device into bootloader mode before connectint it to the PC (turn off the device, push vol. down and power at the same time, the multi color bootscreen should appear, only now connect it to the PC).
To flash via SD card:
Re-format your SD card FAT32. Don´t put anything else on it. Copy the ROM image file with the exact naming as above on the SD card.
To start the flash process, do the same as above, go into bootloader mode, the flash process will start - just follow the on-screen instructions.
i have this same problem only it happened without me flashing anything or something like that. i dont have custom rom or hspl. everything is stock. what should i do?
bump ^^
The message you have entered is too short. Please lengthen your message to at least 10 characters.
Hi
I currently have w7 on my htc hd2 and im trying to revert back to win 6.5.
ive downloaded this stock rom RUU_Leo_TMO_UK_1.43.110.2_Radio_Signed_15.26.50.07U_.
Phone booted into USB Flasher (Hold Power down, Option 5, End call Button.
But it sits at Wait Usb....USB and doesnt move.
What am i doing wrong??
Please help?
Thanks
You need to enter bootloader. Shutdown phone and power on while holding volume down. It will be the tri color screen. Attach USB then run 6.5 rom update
Sent from my HD2 using XDA Windows Phone 7 App
Another option would be to flash the ROM via SD card method.
This way, everything will be set back to factory status.
tictac0566 said:
Another option would be to flash the ROM via SD card method.
This way, everything will be set back to factory status.
Click to expand...
Click to collapse
indeed, you should always use SD method when going back to stock, it will correct most issues and will bring your phone back to how it was when you got it, remember to install HSPL again if you intend to tinker with it some more, SD flash will remove Magldr and HSPL and will also change the radio, spl and ROM
search the forums for how to SD flash, theres plenty of them, infact most of them would have came up in the "suggestions of previously started threads" box when you make this thread!
flashing via bootloader is more reliable, sometimes flashing via sd image is not recognised.
timmymarsh said:
flashing via bootloader is more reliable, sometimes flashing via sd image is not recognised.
Click to expand...
Click to collapse
More reliable but less effective
dazza9075 said:
More reliable but less effective
Click to expand...
Click to collapse
lol, says you
ive had issues previously releasing the keys at a certain time to get the "image" to be recognised, but it does work.
Call me old fashioned, but ive been flashing via bootloarder for many years, sometimes old habits are hard to beat lol
Anyway, both work, take your choice
Hi to all,
I am a noob , i tried to install Android on my HTC HD2 TMO(US) , but after all the Installation i was getting an Error 1E Fatal Error , i am trying to atleast revert back to Windows 6.5, so i downloaded the Official ROM Upgrade from the WebSite the name is T-Mobile_HD2_MR_Software_2.13.531.1.exe and it installed properly without any errors, but all i can see is White Screen Now, does this Installation include OS also or should i install windows 6.5 seperately, please help me
thank you
Hello,
I recently found back my hold HTC HD2 and when I tried to start it up..It just hangs on the HSPL/SPL coloured screen. When I first powered it up HSPL by Cotulla was on it and it always ran Android.
So I download the Stock Windows Phone ROM from the Internet and installed it, but it still hangs on the HSPL Screen. So I installed the Stock SPL but I didn't help..
Can someone please help me? I really want to use the phone again but it seems there is a problem. There still is a SD-Card in it which has 4GB...Can someone please explain me how to get the phone back to Stock windows phone?
Can someone please help me?
Try removing sd card.
If still same issue leave sd card out & reflash ROM from links below.
flash hard spl 2.08
http://forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028
flash htc rom
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
* If it a T-Mobile USA hd2 (red endkey & green callkey) then use that model ROM linked below
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
When rebooting also use the soft reset button next to battery & try it a few times if unsuccessful first time booting.
Maybe useful thread > http://forum.xda-developers.com/showthread.php?t=1344958
load of ROM links (working) , tools & HD2 useful info > http://forum.xda-developers.com/wiki/HTC_HD2
I had the same problem bro, do you want android or windows on the phone?
I want the original Windows Phone back on it.
Mister B:
I followed your steps but it didn't fix the problem. When I start up the phone, the three coloured display shows up and it says 'Serial' on the bottom. Tried the reset button several times and even holding down both Volume-buttons to Hard Reset the phone, but it didn't fix the problem.
The phone always worked fine, what is the problem?
Have you tried doing Task29(full wipe) via HD2 toolkit?
Yes, I already tried Task29 before flashing Hard SPL and Original ROM. I really want to get the Phone working again so my Mom can use it!
Hopefuly someone can help my out with this annoying and weird problem.
After installing the stock rom, what did the phone do? Did it restart to the HSPL screen?
Yes, it restarted back to the HSPL screen. It also shows 'Serial' on the bottom and when I connect USB cable It shows 'USB' on the bottom.
Try flashing stock rom from sd card rather than via usb & see what results you get.
I tried flashing the Stock ROM from the SD-card but it didn't help. It still is stuck at the SPL-screen showing 'Serial' on the bottom when I start up the phone.
Which exact ROM do I need to use for a Netherlands(Europa) HTC HD2 (NON-TMOUS!)?
I hope to hear back from you as soon as possible!
Can someone help me please? Tried everything!
Hello Guys.
My nephew has an HTC HD2 (I supose that). It is stucked on the HTC screen. I tried a lot of thing, but nothing works, i'm affraid to make it worst. If someone can help me.
Some informations.
I don't know if it was working with android or windows;
I can access the tri color screen holding volume down and the power button or the reset button on the back of the device;
I already made a hard reset (holding vol up and down and reset buttons) the process was ok but nothing changes.
I don't know what kind of HD2 is it. On the back of phone I have this: HTC HD2 T8585, on the next line some asian characters, next line CCAF093G0600T0.
I tried to put images but i can't, i'm new, so, only link adresses.
This is the image of my tri color screen
i.imgur.com/HtbtBCu.jpg?1
If I try Task29 from Toolkit I receive this error
i.imgur.com/569SjSn.png
I tried all HSPL (HSPL 2, HSPL 3 and HSPL 4) all kind of errors, but the persistent error on HSPL4 is Flow: 00006, Error: 00006, Unknow
If need some other information.. just ask.
Thanks in advanced.
If it has coloured call/end keys (red&green) then it a US T-mobile model
If all keys are white then it the standard model.
Your hd2 has been unlocked by xtc clip box or similar so cid is probably bypassed without need for HSPL .
I would remove sim card & memory card & try flashing a standard windows rom via usb & if fails try using the sd card flash method.
Worth checking windows drivers are installed or just reinstall WMDC (link in hd2 wiki), using sd method removes pc issues from the problem.
If standard windows rom fails try a custom windows rom such as energy as they contain no radio or spl so sometimes will flash fully when hardware nand issues cause full rom to fail .
working rom links & help can be found in hd2 wiki >
http://forum.xda-developers.com/wiki/HTC_HD2
Ohhh.. Very good informations.
My call/end keys are coloured, so, I have an US T-Mobile model, is right?
I forgot to tell, i live in Brazil.
Now, i'm using windows 10, is it possible to use with WMDC? I tried to find a compatible version but no success.
There is a possibility to manage this phone with windows 10?
Thanks.
First thing I would try is flashing the original US t-mobile hd2 rom via sd card method as removes your pc & w10 from equation ...
us t-mobile rom >
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
you will find guides on flashing from sd card if search or perhaps link in wiki !
---------- Post added at 04:53 PM ---------- Previous post was at 04:40 PM ----------
You should have most functionality of wmdc in windows 10, installing wmdc6.1 in compatibility mode of vista sp2 may help, also connecting device prior to wmdc install may load better driver resources perhaps !
Hello again..
I tried to install this ROM by SD card Method, but the screen shows a white background with the message Loading... and nothing more.
I tried by computer and after 1% I received an error informing that the image file is corrupted. Then, i tried another download site but the error was the same.
Any idea?
Thanks
Just to add more information.. I tried one more TMOUS ROM: RUU_Leo_1_5_TMOUS_2.13.531.1_Radio_15.39.50.07U_2.10.50.26_Signed_LEO_Ship same result, white screen with the word Loading... and nothing more.
I tried also two more ROM's:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship and
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Both with the same result. After press the power button to start the updating it begins the updating and failed on the first step.
Any idea?
Thanks.
flash from sd card >
http://forum.xda-developers.com/showthread.php?t=681317
if TMOUS rom does not flash try energy custom rom (such as one in my signature) and see if that does.
All these tries was made by Sd Card...
And with your Energy ROM.. the same thing. only white screen with a blue word "Loading..." and nothing more happen.
another tries?
Thanks
Besides trying another smaller sd card such as 2gb or 4gb & making sure nbh file in root of card & trying vis usb flash on a couple of computers you running short on options.
You could also try flashing just radio rom image & see what happens !
Please kindly help
Hello everyone.
I brick my htc hd2 leo english version in an attemp to change it to android but for some reasons it did not work on my device, I want to go back to the stock rom but i have search google including this forum for the stock rom but all i get is a dead links..
Please if anyone knows a working link to download the rom, should kindly post it here.
Thanks in advance.
working links >
http://forum.xda-developers.com/wiki/HTC_HD2#Official_ROMs_.26_Radios