Related
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
My phone is stuck on HTC SMART MOBILITY black screen, the one that appears right away when u turn ur phone on. I was trying to upgrade the new rom and it said everythin was finished and it restarted the phone by itself then it got stuck in this screen. The thing is that the USB it is not recognize either by the computer or phone so i cannot do anything with the computer in order to boot up. I tried hard resets and nothin. Any help or ideas welcome... thanks
have you tried using bootloader mode? if I'm not mistaken, you need to hold the Power and Camera buttons while resetting the phone. you could then try to flash a new ROM on the phone. hope it helps!
miguel is correct. Put it into bootloader mode like he said, then flash a ROM back onto it and you should be good to go. This happened to me last night and I freaked out a little bit, but everything was fine after I did this.
Help, I'm stuck too. My phone is now in a loop of the black HTC smart mobility screen. I entered bootloader menu and reflashed the 2.17 ROM. -Which completed to 100% and no luck. I've tried this twice. I've entered the bootloader and tried to flash the stock ROM. It finished, but has no radio? What shold I do, Please help!!!
I must also mention that I was in the middle of relocking the phone after I installed the leaked ROM when my computer got the BSOD.
Format a sd card to fat32, place the image on the sd card, name it TITAIMG.nbh and reset to BL it will auto flash the rom and works when this happens
whwaldrep said:
Format a sd card to fat32, place the image on the sd card, name it TITAIMG.nbh and reset to BL it will auto flash the rom and works when this happens
Click to expand...
Click to collapse
By "Image" do you mean the rom .exe file?
johnannie said:
By "Image" do you mean the rom .exe file?
Click to expand...
Click to collapse
not exactly, the .exe file is simple an auto extracting archive, if you extract it, you will get a bunch of files, one which is about 40-60MB in size and that ends in a .nbh extension, that's the one you need.
You guys are awesome. It worked Thank you!
So why does everyone mess around with "relocking" the device and then flashing the 2.17 ROM after trying the 3.16 version when all you have to do is flash is with an sd card? It's SO easy!!!! Thanks again!
johnannie said:
You guys are awesome. It worked Thank you!
So why does everyone mess around with "relocking" the device and then flashing the 2.17 ROM after trying the 3.16 version when all you have to do is flash is with an sd card? It's SO easy!!!! Thanks again!
Click to expand...
Click to collapse
What radio are you using? Did flashing from the SD downgrade the radio as well?
theFear13ss said:
What radio are you using? Did flashing from the SD downgrade the radio as well?
Click to expand...
Click to collapse
I'm pretty sure that it did. When I tried to downgrade to 2.17, the flash worked, but there was no Radio at all. So I tried to reflash the 3.16 and it flashed but didn't work (endless boot to the HTC Screen over and over)
So I tried the SD card method or flashing back to the 2.17 and it worked absolutely perfectly. The only issue was that there was no MSID or MDN but I wrote those down.
Same problem, but turns off
Hey.
I have the same problem, I'm stuck at the "smart mobility" screen. But my problem is that it turns down after some sek with the smart mobility screen.
What should i do??
hii
i have the same problem with smart mobility i bought the phone htc touch from e-bay (gray coulor) and i its didnt work from the begining and the problem is that i dont know what originaly rom it had.
i try to flash rom from the computer(vista) roms (blue, green, new blue,red, 1.11.707.1b_4mb ,e_1.11.707.1b_4mb _4.1.13.42, 1.1b_4.1.12.42_02.93.90_ship,) none of them work some of them update till 3% and some of them till 100% but very fast and then its reset and i get error 270
someone got an idea for me?
Hello,
I need help to!!!
I`m stuck on the same screen. I did the sd card thing but after going to BL screen it flashes for a second to a screen with "Loading" and then return to BL where it stays. Down on screen it says "Serial".
WHAT SHALL I DO? PLEASE HELP!
helo
hi where dose one get that atach file
where does one get the attach file to copy on the sd card, course my phone has also stuck on the smart mobilety black screen
miguelfp1 said:
have you tried using bootloader mode? if I'm not mistaken, you need to hold the Power and Camera buttons while resetting the phone. you could then try to flash a new ROM on the phone. hope it helps!
Click to expand...
Click to collapse
thank you so much it work well
i hardly belive the guy at sprint store have my phone for one day and shake their head
Stuck on SMART MOBILITY
guys pls help,
My Phone is p3400i
I am stuck on the smart mobility screen..My screen says
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
Pls also give the links of the files, to download, to solve the issue.
sethanuj said:
guys pls help,
My Phone is p3400i
I am stuck on the smart mobility screen..My screen says
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
Pls also give the links of the files, to download, to solve the issue.
Click to expand...
Click to collapse
turn on your device, remove and replace the batteries then go to boot loader mode ( hold the Power and Camera buttons ) you immediately install the rom upgradeshttp !!! You can download it at ://www.htc.com/www/SupportDownload.aspx?p_id=10&cat=0&dl_id=609 good luck
hi to all friend
is there a way for copy arabic font to htc smart?
it's so necessary , i need it
plz help me
as soon as u can
tnx
smart mobility
hello friend
i am having htc p3400 i tried upgrading wm6.5 on it while installing it it shows congrats........ you have updated your rom but when it restart it only shows smat mobility nothing can be done further i tried it many times same problem occurs
one of us advised me to use the memory card techn...to place the image named TITAIMG.nbh but it doesn't solve my issue can any one provide me proper way to solve it
thanks in advance
Hi all,
I encounter some problems with the polaris. When I want to use the camera I encounter the message:" unable to initialize....".
I also encounter problems with the FM radio: when I want to use my radio, it starts up, you see the screen, but no sound radio stations can be found. This means no radio functionality as well.
I've perfomed soft reboots but also hard reboots (so it initializes completely again). I also tried new ROMs. Nothing helps. Anybody recognizes this problem? Looks like that it has problems initializing the radio/ camera function.
Is there an update available which could fix this problem? My device is not damaged at all. Or would there be an other solution, as far as you know? Furthermore, the phone works perfectly. Hopefully you can help me with this.
Thanks!!!
Greetz,
M
First flash ur pda with :
http://www.4shared.com/file/46948092/9e97bc37/Radio_Murata_1582123.html
or
http://www.4shared.com/file/54732373/c9f753c5/Radio_Murata_1582514.html
If that doesnt work.Keep the one murata radio on your pda and flash another win mobile rom(without radio rom).
I prefer khanx vanilla v6 (radio isnt working, http://forum.xda-developers.com/showthread.php?t=398796 ) or swtos roms (http://forum.xda-developers.com/showthread.php?t=404977 )
look also:http://forum.xda-developers.com/showthread.php?t=414436
Other radio roms are crap....
2 ALL. My FM radio very very poor, allways noice & appear and disappear signal, in same moment - mobile phone samsung about 200$ give 100% better quality
any suggest ?maybe need forget to use radio in cruise ???
Hi Badguy,
Yesterday I tried to flash my pda, as you said, with the radio rom "http://www.4shared.com/file/46948092...a_1582123.html". the update ended up in 99% completeness. So now....I have the tri color error (so I cannot use my phone). Hopefully I will be able to restore it again.
You have any tips?
Michel
hi.
Yes i forgot to tell you, that u have to flash HARD SPL first, then u can flash any custom rom and any radio rom.
Now, u have to flash ur pda with original touch cruise rom, which will restore your pda to normal working mode.Original rom is on CD, which was in box, when u bought ur phone.When the iriginal rom is flashed, u do the hard spl, then u can flash any software made for polaris.
Hi,
Thanks for the info...I am not aware that I received any CD's with original roms.
If I have not received any CD with Rom on it, can I not just update the ROM with ,for example, Diamond r7 Rom?
I tried this, but I didn't succeed. Normally I connect the phone to my pc, then enter the 'bootloader mode (from hard SPL)' on my pda by starting up the bootloader on my polaris and then I run the new ROM from my computer. When I use this procedure, the ROM is updated. I used this procedure as well for this 'flash'.
Since I have now the permanent tri-color, and therefore cannot enter bootloader, how can I update my ROM to the original version (or to any other ROM)?
Any further tips?
Thanks!
Michel
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.
badguy999 said:
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.
Click to expand...
Click to collapse
Hi,
I have tried the above steps. I have downloaded the rom, upacked it and renamed into POLAIMG.nbh
I pressed the camera button all the time and performed a soft reset with stylus. The following happens:
1. The three color comes again (it says: POLA100, SPL-1.25.0000, CPLD-2; in the red part; also in the above right corner of the red part it says: RUUNBH).
2. Then it turns into a white screen with: 'Loading...'.
3. After that it says...'checking...'
4. After this it says:
"0025002
not allow"
Then it returns again to the three color with same text as above.
Do you know any tips to solve my problem? Hopefully you can help me!
Kind regards,
M
Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M
badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
mewsijben said:
Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M
Click to expand...
Click to collapse
Hi,
I know that I need to install Hard SPL and I have read the threads you mentioned (before). The thing is, how can I install Hard SPL without the use of any active sync. In other words: how can I install Hard SPL by using the SD-card?
If you can help me with this...it would be great.
Michel
bkeaver said:
badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
Click to expand...
Click to collapse
U cant. First u have to flash original rom to make the pda working again. Then u can install hardspl through cable. original rom can be flashed with microsd method.
Are u sure that u have memory card in fat32??Cause error u described few post before.
Hi,
When I want to flash it with original rom (rename the rom to POLAIMG.nbh, it starts loading, than checking, and than it says 'not allow....and a number' See also a few posts back. I formatted the SD to FAT 32
Somehow I'm not allowed to install the original rom. Therefore I thought that I needed to install Hard SPL.
Or should I press a combination of buttons on my phone? When I press the camera button and then soft reset, the same happens, when I just reset (he tries to load the image, but does not work).
I'm now allmost through all my options here. Hopefully somebody can help.
Greetz,
michel
camera problems
Hi,
as far as i understand the "cannot initialize" camera problem is a know HTC hardware problem and the only solution to it is to send the phone to HTC for board replacement.
(it might suddenly start working for some time - i saw reports that it happens , but than the problem will probably return -- there are lot of touch cruise users i saw with this problem and the only known solution i saw was HTC repair)
Is true that the polaris is "weak" phone. mine had trouble with connecting to 3G. And during calls, persons didnt hear me well and from time to time i was muted . So, they change motherboard.
Polaris has really weak signal strenght. Far far better signal i got from tytn2 and trinity.With regular radio rom...
Hi
I've got a HTC Hermes that won't boot up properly.
I've had a quick search and can't find to find the exact same proble but apologies if this has already been raised.
I previously flashed my T-mobile ROM with RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar.
The problem started when I downloaded a Registry Optimizer from Windows Update. When I started using this my phone was not in airplane mode, and just hangs on the logo screen (this is the gold Tai Edition)
I tried to do a hard reset (this goes to the screen with the four colour bands on it), and then when I reset it again it just switches to the logo screen and stays there. After a while, the screen goes white and stays there
I've got only a basic knowledge of flashing ROMs and when I first flashed my ROM i used Hard SPL and the basic AT&T Windows 6.1 ROM, before using TAI's custom one.
I presume I need to try and re-install the ROM (via the SD card, as Active Sync doesn't recognise the phone)
I was aware of risks whilst using the Registry Optimizer and realise that this is my fault, so I'm not expecting any quick fixes
Would be grateful though if anyone could point me in the right direction, if my phone is recoverable, and not bricked.
Cheers
You flashed a rom for the Kaiser.... You have a Hermes...
Looks like a brick to me....
If you use the sd card method you might be able to fix BUT make sure its a Hermes rom....
Thanks for pointing that out!
I found the thread on how to unbrick a hermes, so should be ok from here..
Hello,
I recently found back my hold HTC HD2 and when I tried to start it up..It just hangs on the HSPL/SPL coloured screen. When I first powered it up HSPL by Cotulla was on it and it always ran Android.
So I download the Stock Windows Phone ROM from the Internet and installed it, but it still hangs on the HSPL Screen. So I installed the Stock SPL but I didn't help..
Can someone please help me? I really want to use the phone again but it seems there is a problem. There still is a SD-Card in it which has 4GB...Can someone please explain me how to get the phone back to Stock windows phone?
Can someone please help me?
Try removing sd card.
If still same issue leave sd card out & reflash ROM from links below.
flash hard spl 2.08
http://forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028
flash htc rom
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
* If it a T-Mobile USA hd2 (red endkey & green callkey) then use that model ROM linked below
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
When rebooting also use the soft reset button next to battery & try it a few times if unsuccessful first time booting.
Maybe useful thread > http://forum.xda-developers.com/showthread.php?t=1344958
load of ROM links (working) , tools & HD2 useful info > http://forum.xda-developers.com/wiki/HTC_HD2
I had the same problem bro, do you want android or windows on the phone?
I want the original Windows Phone back on it.
Mister B:
I followed your steps but it didn't fix the problem. When I start up the phone, the three coloured display shows up and it says 'Serial' on the bottom. Tried the reset button several times and even holding down both Volume-buttons to Hard Reset the phone, but it didn't fix the problem.
The phone always worked fine, what is the problem?
Have you tried doing Task29(full wipe) via HD2 toolkit?
Yes, I already tried Task29 before flashing Hard SPL and Original ROM. I really want to get the Phone working again so my Mom can use it!
Hopefuly someone can help my out with this annoying and weird problem.
After installing the stock rom, what did the phone do? Did it restart to the HSPL screen?
Yes, it restarted back to the HSPL screen. It also shows 'Serial' on the bottom and when I connect USB cable It shows 'USB' on the bottom.
Try flashing stock rom from sd card rather than via usb & see what results you get.
I tried flashing the Stock ROM from the SD-card but it didn't help. It still is stuck at the SPL-screen showing 'Serial' on the bottom when I start up the phone.
Which exact ROM do I need to use for a Netherlands(Europa) HTC HD2 (NON-TMOUS!)?
I hope to hear back from you as soon as possible!
Can someone help me please? Tried everything!