My phone is stuck on HTC SMART MOBILITY black screen, the one that appears right away when u turn ur phone on. I was trying to upgrade the new rom and it said everythin was finished and it restarted the phone by itself then it got stuck in this screen. The thing is that the USB it is not recognize either by the computer or phone so i cannot do anything with the computer in order to boot up. I tried hard resets and nothin. Any help or ideas welcome... thanks
have you tried using bootloader mode? if I'm not mistaken, you need to hold the Power and Camera buttons while resetting the phone. you could then try to flash a new ROM on the phone. hope it helps!
miguel is correct. Put it into bootloader mode like he said, then flash a ROM back onto it and you should be good to go. This happened to me last night and I freaked out a little bit, but everything was fine after I did this.
Help, I'm stuck too. My phone is now in a loop of the black HTC smart mobility screen. I entered bootloader menu and reflashed the 2.17 ROM. -Which completed to 100% and no luck. I've tried this twice. I've entered the bootloader and tried to flash the stock ROM. It finished, but has no radio? What shold I do, Please help!!!
I must also mention that I was in the middle of relocking the phone after I installed the leaked ROM when my computer got the BSOD.
Format a sd card to fat32, place the image on the sd card, name it TITAIMG.nbh and reset to BL it will auto flash the rom and works when this happens
whwaldrep said:
Format a sd card to fat32, place the image on the sd card, name it TITAIMG.nbh and reset to BL it will auto flash the rom and works when this happens
Click to expand...
Click to collapse
By "Image" do you mean the rom .exe file?
johnannie said:
By "Image" do you mean the rom .exe file?
Click to expand...
Click to collapse
not exactly, the .exe file is simple an auto extracting archive, if you extract it, you will get a bunch of files, one which is about 40-60MB in size and that ends in a .nbh extension, that's the one you need.
You guys are awesome. It worked Thank you!
So why does everyone mess around with "relocking" the device and then flashing the 2.17 ROM after trying the 3.16 version when all you have to do is flash is with an sd card? It's SO easy!!!! Thanks again!
johnannie said:
You guys are awesome. It worked Thank you!
So why does everyone mess around with "relocking" the device and then flashing the 2.17 ROM after trying the 3.16 version when all you have to do is flash is with an sd card? It's SO easy!!!! Thanks again!
Click to expand...
Click to collapse
What radio are you using? Did flashing from the SD downgrade the radio as well?
theFear13ss said:
What radio are you using? Did flashing from the SD downgrade the radio as well?
Click to expand...
Click to collapse
I'm pretty sure that it did. When I tried to downgrade to 2.17, the flash worked, but there was no Radio at all. So I tried to reflash the 3.16 and it flashed but didn't work (endless boot to the HTC Screen over and over)
So I tried the SD card method or flashing back to the 2.17 and it worked absolutely perfectly. The only issue was that there was no MSID or MDN but I wrote those down.
Same problem, but turns off
Hey.
I have the same problem, I'm stuck at the "smart mobility" screen. But my problem is that it turns down after some sek with the smart mobility screen.
What should i do??
hii
i have the same problem with smart mobility i bought the phone htc touch from e-bay (gray coulor) and i its didnt work from the begining and the problem is that i dont know what originaly rom it had.
i try to flash rom from the computer(vista) roms (blue, green, new blue,red, 1.11.707.1b_4mb ,e_1.11.707.1b_4mb _4.1.13.42, 1.1b_4.1.12.42_02.93.90_ship,) none of them work some of them update till 3% and some of them till 100% but very fast and then its reset and i get error 270
someone got an idea for me?
Hello,
I need help to!!!
I`m stuck on the same screen. I did the sd card thing but after going to BL screen it flashes for a second to a screen with "Loading" and then return to BL where it stays. Down on screen it says "Serial".
WHAT SHALL I DO? PLEASE HELP!
helo
hi where dose one get that atach file
where does one get the attach file to copy on the sd card, course my phone has also stuck on the smart mobilety black screen
miguelfp1 said:
have you tried using bootloader mode? if I'm not mistaken, you need to hold the Power and Camera buttons while resetting the phone. you could then try to flash a new ROM on the phone. hope it helps!
Click to expand...
Click to collapse
thank you so much it work well
i hardly belive the guy at sprint store have my phone for one day and shake their head
Stuck on SMART MOBILITY
guys pls help,
My Phone is p3400i
I am stuck on the smart mobility screen..My screen says
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
Pls also give the links of the files, to download, to solve the issue.
sethanuj said:
guys pls help,
My Phone is p3400i
I am stuck on the smart mobility screen..My screen says
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
Pls also give the links of the files, to download, to solve the issue.
Click to expand...
Click to collapse
turn on your device, remove and replace the batteries then go to boot loader mode ( hold the Power and Camera buttons ) you immediately install the rom upgradeshttp !!! You can download it at ://www.htc.com/www/SupportDownload.aspx?p_id=10&cat=0&dl_id=609 good luck
hi to all friend
is there a way for copy arabic font to htc smart?
it's so necessary , i need it
plz help me
as soon as u can
tnx
smart mobility
hello friend
i am having htc p3400 i tried upgrading wm6.5 on it while installing it it shows congrats........ you have updated your rom but when it restart it only shows smat mobility nothing can be done further i tried it many times same problem occurs
one of us advised me to use the memory card techn...to place the image named TITAIMG.nbh but it doesn't solve my issue can any one provide me proper way to solve it
thanks in advance
Related
Hi guys,
This is my first post over here >>> Actully i have a problem with the athena i tried to unlouck it using X7500 Unlocker but i faced a really difficult problem. i am getting a black screen only no boot , no hard reset and no USB connection. I tried my best to breing it back up but i couldn't. Plz i need your help to solve this problem.
Thanks in advance,
Waiting ???
omanidev said:
Waiting ???
Click to expand...
Click to collapse
have you tried reading the wiki which has a page on this very topic?
No I haven't >> i9 will try now
I tried all the wiki instruction but actully i am not getting the boot screen at all only black screen no more at all
omanidev said:
I tried all the wiki instruction but actully i am not getting the boot screen at all only black screen no more at all
Click to expand...
Click to collapse
Same happened to one of our units here.
Needed a trip to the service. ALWAYS take out SIM card and miniSD card out when flashing, they're known to cause random f***ups.
jpiskorski said:
Same happened to one of our units here.
Needed a trip to the service. ALWAYS take out SIM card and miniSD card out when flashing, they're known to cause random f***ups.
Click to expand...
Click to collapse
sorry about my english i have the same problem when i press camera key +power +rest i dont have any action and i try the camera +slid volum key down and i try camera + voice key and i try all key but i dont hav any action all this whitout sim and minisd just black sacreen help me plz plz plz
I have interest problem. After step 2 of unlocking i get the black screen. After I have followed of instructions. When I try to flash the ROM, i see: "Error [302]: Update error"
I have no SIM or card inside. I tried with 3 different ROM flash my f***ed device. Nothing helps. May be anyone of u can help me?
Hi there.
Follow the instructions here *word for word*:
http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
miha_conan said:
I have interest problem. After step 2 of unlocking i get the black screen. After I have followed of instructions. When I try to flash the ROM, i see: "Error [302]: Update error"
I have no SIM or card inside. I tried with 3 different ROM flash my f***ed device. Nothing helps. May be anyone of u can help me?
Click to expand...
Click to collapse
What state is your Athena in ? Bootloader accessible, black screen, what exactly ?
miha_conan said:
I have interest problem. After step 2 of unlocking i get the black screen. After I have followed of instructions. When I try to flash the ROM, i see: "Error [302]: Update error"
I have no SIM or card inside. I tried with 3 different ROM flash my f***ed device. Nothing helps. May be anyone of u can help me?
Click to expand...
Click to collapse
hi
i had similar problem but before any one can help you u have to tell us in what state exactly your device is and try to get it in to bootloader before we can help first thing is you want to check in bootloader is that if your device is hard spl (if yes then you can flash it with any rom)
the eiset way to do it is Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+com manager+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD.
u can use any (athena rom ) as long as it is hard spl other wise if not sure or any doubt use your ship rom (nbh file)
hope this helps
need experts guidence
hi @all
i also got one 7500 for repair, client told me while CID unlocking communications breaks and AMEO is DEAD.
Does not go into BOOT-LOADER mode,
Computer not detects it,
No responce to charger, no ring
Battery is charged with 3.77vDC
Red ring comes for a sec only try to RESET the device with Charger connected
Red ring also visible as long as Battery is not in the Phone and Charger is connected.
IS THERE ANY HOPE TO REVIVE IT
TIA
with Regards
hobbiest_2k3
Help I cannot get my 8525 off the tri colored screen. I have been searching thru these forums but have not found the right combination.
It is set up for WM6 and att
did you press the reset button and it still comes back to this tricolor screen?
if resetting doesnt work, hard reset, if that doesnt work then yu may have to reflash os. My suggestion would be using the sd card method as all you need to do is be in bootloader with a fat32 formatted memory card and the .nbh file of your favourite rom installed on it and renamed to "hermimg.nbh". hope this helps...
stuck in bootloader screen
my phone...said no signal...I couldn't even open the phone pad ....then my sim did not show.....I tried soft resets several time.... nothing would help I noticed under device info it would not show radio version or rom version..... so I downloaded a fresh version or att 6.0 wm.. and tried that to see if it would help... while installing it stop @ 11 percent with error code.262 tried several times and nothing still same thing..... is their hope.... can I install a cooked rom... or is my phone dead I hope not but you guys are the best....can anyone please help......
dr71399, sounds as if your radio has had it... try to fix any bad blocks on your phone with MTTY first(do a search in upgrading for instructions) first then try to flash a radio only rom, if that doesnt work you should do a search for others that have had their radios corrupted and see what is suggested. Sorry to be the bearer of bad news but most people find once that happens its a brick, not that you cant flash an os only rom to use as a PDA.
If your phone is still under warranty then try to put the original rom back on and return for warranty but thats all I can think to do... See if a chef can fix up an os only rom for at&t or try to do it yourself.
Hi all,
I encounter some problems with the polaris. When I want to use the camera I encounter the message:" unable to initialize....".
I also encounter problems with the FM radio: when I want to use my radio, it starts up, you see the screen, but no sound radio stations can be found. This means no radio functionality as well.
I've perfomed soft reboots but also hard reboots (so it initializes completely again). I also tried new ROMs. Nothing helps. Anybody recognizes this problem? Looks like that it has problems initializing the radio/ camera function.
Is there an update available which could fix this problem? My device is not damaged at all. Or would there be an other solution, as far as you know? Furthermore, the phone works perfectly. Hopefully you can help me with this.
Thanks!!!
Greetz,
M
First flash ur pda with :
http://www.4shared.com/file/46948092/9e97bc37/Radio_Murata_1582123.html
or
http://www.4shared.com/file/54732373/c9f753c5/Radio_Murata_1582514.html
If that doesnt work.Keep the one murata radio on your pda and flash another win mobile rom(without radio rom).
I prefer khanx vanilla v6 (radio isnt working, http://forum.xda-developers.com/showthread.php?t=398796 ) or swtos roms (http://forum.xda-developers.com/showthread.php?t=404977 )
look also:http://forum.xda-developers.com/showthread.php?t=414436
Other radio roms are crap....
2 ALL. My FM radio very very poor, allways noice & appear and disappear signal, in same moment - mobile phone samsung about 200$ give 100% better quality
any suggest ?maybe need forget to use radio in cruise ???
Hi Badguy,
Yesterday I tried to flash my pda, as you said, with the radio rom "http://www.4shared.com/file/46948092...a_1582123.html". the update ended up in 99% completeness. So now....I have the tri color error (so I cannot use my phone). Hopefully I will be able to restore it again.
You have any tips?
Michel
hi.
Yes i forgot to tell you, that u have to flash HARD SPL first, then u can flash any custom rom and any radio rom.
Now, u have to flash ur pda with original touch cruise rom, which will restore your pda to normal working mode.Original rom is on CD, which was in box, when u bought ur phone.When the iriginal rom is flashed, u do the hard spl, then u can flash any software made for polaris.
Hi,
Thanks for the info...I am not aware that I received any CD's with original roms.
If I have not received any CD with Rom on it, can I not just update the ROM with ,for example, Diamond r7 Rom?
I tried this, but I didn't succeed. Normally I connect the phone to my pc, then enter the 'bootloader mode (from hard SPL)' on my pda by starting up the bootloader on my polaris and then I run the new ROM from my computer. When I use this procedure, the ROM is updated. I used this procedure as well for this 'flash'.
Since I have now the permanent tri-color, and therefore cannot enter bootloader, how can I update my ROM to the original version (or to any other ROM)?
Any further tips?
Thanks!
Michel
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.
badguy999 said:
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
U need this rom, This version u should get with the phone.But it doesnt matter now. just ON/OFF the phone, connect it with cable and pc. Start flashing. Then make hardspl.
Did u hear for flashing through microsd card?? All what u must do is:
1. U have to have memory card in mode fat32.
2. Put onto the memory card rom file. Usually is named something.nbh .You have to rename it to POLAIMG.nbh .
3. put the memory card into the PDA and u have to go to bootloader mode ( press the camera button, make soft reset with stylus and u have to press camera button all the time, until u get 3color mode.
Radio roms, splash screens, roms , all, u can flash with microSD mode.
btw http://forum.xda-developers.com/showthread.php?t=381600&highlight=microsd Its a MUST!!
Hope it works now.
Click to expand...
Click to collapse
Hi,
I have tried the above steps. I have downloaded the rom, upacked it and renamed into POLAIMG.nbh
I pressed the camera button all the time and performed a soft reset with stylus. The following happens:
1. The three color comes again (it says: POLA100, SPL-1.25.0000, CPLD-2; in the red part; also in the above right corner of the red part it says: RUUNBH).
2. Then it turns into a white screen with: 'Loading...'.
3. After that it says...'checking...'
4. After this it says:
"0025002
not allow"
Then it returns again to the three color with same text as above.
Do you know any tips to solve my problem? Hopefully you can help me!
Kind regards,
M
Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M
badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
mewsijben said:
Here I am again.
I now concluded from the text in the red section, that I indeed don't have Hard-SPL on it. I think this causes the fact that it is 'not allowed''. Would you agree on this one?
This means that I need to install HARD-spl from the tri-color situation.
This is the next big challenge I think. Do you have tips for me? Hopefully we will [email protected]
Greetz,
M
Click to expand...
Click to collapse
Hi,
I know that I need to install Hard SPL and I have read the threads you mentioned (before). The thing is, how can I install Hard SPL without the use of any active sync. In other words: how can I install Hard SPL by using the SD-card?
If you can help me with this...it would be great.
Michel
bkeaver said:
badguy999 was trying to tell you that about 3 or 4 posts back. Yes you must HardSPL your device before you load anything other than the Stock ROM. Read and follow the following thread to hardspl:
http://forum.xda-developers.com/showthread.php?t=375338
also read this
http://forum.xda-developers.com/showthread.php?t=370434
hope this helps... good luck
Click to expand...
Click to collapse
U cant. First u have to flash original rom to make the pda working again. Then u can install hardspl through cable. original rom can be flashed with microsd method.
Are u sure that u have memory card in fat32??Cause error u described few post before.
Hi,
When I want to flash it with original rom (rename the rom to POLAIMG.nbh, it starts loading, than checking, and than it says 'not allow....and a number' See also a few posts back. I formatted the SD to FAT 32
Somehow I'm not allowed to install the original rom. Therefore I thought that I needed to install Hard SPL.
Or should I press a combination of buttons on my phone? When I press the camera button and then soft reset, the same happens, when I just reset (he tries to load the image, but does not work).
I'm now allmost through all my options here. Hopefully somebody can help.
Greetz,
michel
camera problems
Hi,
as far as i understand the "cannot initialize" camera problem is a know HTC hardware problem and the only solution to it is to send the phone to HTC for board replacement.
(it might suddenly start working for some time - i saw reports that it happens , but than the problem will probably return -- there are lot of touch cruise users i saw with this problem and the only known solution i saw was HTC repair)
Is true that the polaris is "weak" phone. mine had trouble with connecting to 3G. And during calls, persons didnt hear me well and from time to time i was muted . So, they change motherboard.
Polaris has really weak signal strenght. Far far better signal i got from tytn2 and trinity.With regular radio rom...
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
(1) Take out the battery / Unplug the phone
(2) Put the battery back in
(3) Turn it on and keep only Vol Down pressed
You should get a tri-color screen. Connect USB. Once it says USB at bottom, you are good to go with flashing.
hard reset
these solutions don't work. I had the same problem. Anyone has an idea?
any ideas about that? anyone found the solution?
enter boot loader n flash a new rom via sd card?
omnia1994 said:
enter boot loader n flash a new rom via sd card?
Click to expand...
Click to collapse
already done that... same problem... anything else?
reubenbubu said:
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
Click to expand...
Click to collapse
put phone into bootloader requires you to press volume DOWN while power resetting the phone. Make sure the ROM is named LEOIMG.nbh and is on the root of the sd card. Make sure the sd card is 8gb or smaller unless it is a class6.
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
you need to put your phone back into bootloader, volume down while powering on the phone. then after you see the tricolored screen, connect it to the usb.
t45o5 said:
already done that... same problem... anything else?
Click to expand...
Click to collapse
what problem are you having exactly???? you haven't told us any details to help you.
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
firebroker said:
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
Click to expand...
Click to collapse
stuck where, on the splash screen?
do the same thing only this time use the HTC support page for the correct stock ROM.
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
firebroker said:
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
Click to expand...
Click to collapse
That's weird, maybe they didn't make a 3.14 ROM for your region.
Help BRicked ! htc incredible s....
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Just downgrade again, I had same prob. Everything good now.
sent from my inspire 4g using xda app.
kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
woah, how the hell did you end up in this forum? lol.
can you get ADB going?
Post your problem in this forum so people who know your device better can help.
http://forum.xda-developers.com/forumdisplay.php?f=1026
HD2 TMOUS stuck after performing task29
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
im having the same problem!i installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again but still nothing...
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
Hello Everyone.
TBH im my opinion you guys are my last hope to fixing my hd2.
So here's the problem.
I have a HD2 that turns on but does not have a functioning touc screen.
ABOUT MY PHONE:
HTS HD2
Has old android in it ( I dont know which one it is, but i can describe it. It starts up with a BootLoader asking to boot android, so i have the option to press yes or no. It has old blue theme in the background.
Here's the problem. I've called HTC support and i learn my phone still has manufacturers warranty. So basically i can just send in the phone, and ill id have to pay is shipping. BUT! here's the problem. HTC does not approve of third party software installed in the phone, in my case it is the ANDROID. So now im trying to wipe android put, and install windows mobile again. I downloaded the t-mobile stock rom and when i plug in my phone, the windows mobile center automatically pops out but it shows an error symbol.
TL;DR
So my question to you guys is how do i remove Android and install Windows Mobile on an HTC HD2 with a non working screen
Thank you so much guys for even considering to help me
Mod if i posted on the wrong section could you please move it for me.
Thanks
hi,
try this:
http://forum.xda-developers.com/showthread.php?t=956715
Thanks so Much But here's an update
I went ahead and downoaded the HSPL3
I turned on my phone and also pressing the voulme down button which brought to me to a red green and white color. I had my phon conneceted to the computer VIA USB. I first double clicked the T-Mobile rom update thingy and went ahead accpeted the warning signs etc,so the first thing that came up was identifying phone, and after 5 seconds it disappears so nothing came fro that, then later i double clicked the HSPL3 which asked me to either pick the 2.8 or the the 2.8 spl i believe, i had the spl installed so i wen ahead clicked the 2.8. it installed and my phone rbooted and BAM my touch screen worked, and when it asked to boot android i pressed NO. my phone rebooted and iagain the boot loader came up and asked to bott android, so this time i pressed BUt it didnt work because the touch screen stopped working!
So i went ahead to try everything all over but this time i clicked the 2.8 spl and after a minute on my phone it displayed " we hacked it" etc etc etc, i robooted my phone, ad it worked, i turned it on and off twice and it worked i was using my phone after a month So after playing with it alittle bit i decided to put my sim card in it. I turned off the phone and put the Sim card and turned on the phone so i can use it but.....once again the touch screen stopped working... ****!!!!!!
yep, now the touchscreen is once again not working
bump bumpity bump
fusion1204 said:
bump bumpity bump
Click to expand...
Click to collapse
Download a stock WM ROM for your phone, extract and rename your .nbh to leoimg.nbh. Transfer leoimg.nbh. to your SDcard.....enter bootloader mode....there it will flash back to your WM ROM with all HSPL remove. Time to send back to Manufacturer for repair..
Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?
fusion1204 said:
Okay hold on. So when you see stock WM ROM coud that be the "T-Mobile_HD2_MR_Software_311...." file? and where can i find my .nbh file?
Click to expand...
Click to collapse
extract that from your .exe file.
Stock ROM can be found here
http://forum.xda-developers.com/showthread.php?t=655653
Make sure you use the Stock ROM specific for your phone, else you will brick your phone.
I went ahead and did that, but nothing changed did i do something wrong?
fusion1204 said:
I went ahead and did that, but nothing changed did i do something wrong?
Click to expand...
Click to collapse
Try following this guide....
http://forum.xda-developers.com/showthread.php?t=681317
10507 Thank you for the links but it didn't wok for me.
UGh!
Am i doing something woring? i mean i can get to the screen where it shows the foru colors, i guess that would be flashing and once i get there i can't do anything else the only way for me to do anything while im on that screen is if i have it connected in with my computer, and also start runinng the HSPL program which switches from Hspl to a NON hspl vice versa.
I hope youre not tired of me lol!
please help me out with this stupid situation im in.
Thank you.
Bumpity bump please help me out