[Q] need help!!!! my htc hd2 stuck on bootloader!! - HD2 General

I need help please my htc is stuck in bootloader!! This is the first time i was flashing my phone.... And there is not custom rom yet installed its just the process of getting hspl.. The situation was i was connceting it to hspl and when it was connecting i accidentally disconnected it! Now its stuck on bootloader!! And it wont connect to active sync!! The spl is 2.10.000 and white part of the tri coulor saids usb. Now can someone please help me!!! I really like the phone and im trying not to lose it!! Please tell me if my phone is broken or not.. And if it isnt please let me know how i can fix it!!! Please need quick response!! I CANNOT ACCESS MY PHONE AT ALL ITS JUST IN BOOTLOADER!
... uhm i tried to flash it with stock rom..... using 2.13 stock rom.. and i went through the whole process. my phone went through the htc loading thing... and btw my phone cannot connect to active sync..... so i went through it and then nothing happened im still in the situation i was before... and then i tried flashing it using hspl and still it keeps saying error bad spl.... and right now my bootloader screen saids spl 2.10.000.. please someone help me... do i need to use a different spl??? cause i still cant access my phone.. i cant connect to active sync either..

Related

Urgent Help Needed Please! "No-Gsm" BRICKED?

i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
please help, at least let me know if Ive got a chance of repairing it
i believe if you can get it in to bootloader mode you can flash back to original rom and start over
i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?
i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....
nope, keep getting "device not responding" or "connection error". any other sugestions?
i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.
please help someone i realy need to fix my phone
Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...
ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.
oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished
yes!!! it worked!! thank you very very much for your help!!!

Help guys! anyone....

This is the story:
I bricked my phone (Elf) because I didn't CID unlock it after installing the Opal 6.1 rom. So when I tried to install the backup ROM I made it got bricked. I read all the threads about how to revive the phone and I can't get any to work.
I can't do the GoldCard since I don't have a working WM phone. So I tried the Wild card unbricker ROM and the phone got worse. Now I only get to the tri color screen without any "RUU" at the top and every time I try to flash another ROM on it it shuts and I get an error message saying something like "Invalind vendor or error in image" etc... Please help me, what happend??? I cant flash any ROM. I cant do hardspl. I can't do anything.
PLEASE HELP ME! Anyone who's familiar to this problem?
Thx in advance!

help!!

hi,
ive been trying to upgrade an artemis mobile to a custom rom...and ive gone through all the necessary steps (cid unlocking, etc)
however, my device is stuck at the loading screen...and nothing happens after that...
i can get into the bootloader....but thats about it...
any suggestions on what to do?? i'd really appreciate the help
thanks.
Does your phone gets into the bootloader....???
If yes, then after entering the bootloader mode(with color stripes),
connect your phone with the PC and launch the ROM Update Utility....
The ROM update will start.
If it does not, it means that you cell phone is still not CID unlocked...
Check your SPL as 1.11.0000
If it is so then your phone is CID unlocked, or else not....
Reply if any queries...

Help Help Help

Hi i have flashed my phone with the new Artemis_v240_WWE rom, everything went ok, did hard reset etc and phone worked fine, then it locked up after about a hour so i pulled the battery and rebooted, now i cant get past the first white HTC screen with the RGD info at the bottom, it's just stuck!! I have tried to put the usb in and attach it to my laptop but it's still doing nothing?? Please can someone advise me on how to get out of this.
Thanks
ok i got a update, i can get it to the bootloader screen but it's not being seen in active sync, please help
did you remember to flash the cooks recommend radio?
no i never flashed a new radio as i thought the one i was using was ok as it worked with artemis v19 ok, is there anyway round this, if the radio is wrong?
i am getting to the bootloader screen ok but i cant flash anything cause it's not being seen in active sync?
Beatkeeper said:
i am getting to the bootloader screen ok but i cant flash anything cause it's not being seen in active sync?
Click to expand...
Click to collapse
i remember the active sync will not show anything if you enter the three-color bootloader screen...
try to flash a new rom...
so long as the white area says usb you can flash.

[Q] HELP!!! Rom Manager bricked my device!!

here's the story,
i installed rom manager from the market. flashed the clockwork recovery using it, then tried to flash a new rom using rom manager. i am sure that the rom is compatible with my settings. now my phone is in the boot loop and i can't get into recovery nor the bootloader. any help?
32a s-off
radio 6.35
2007 spl
i can only remember the basics of my device since i can't get into the bootloader...
THANKSSS
Did you pull the battery and then try booting into recovery/bootloader? If you get thrown into the bootloop when you put the battery back in, try holding back/home while putting the battery in.
Thanks for helping me! I actually did try that method but I was back to boot loop again. I really hate that "Rogers" screen.
Does that mean I'm bricked for good?
as it turns out, HTC makes magical device as it cured itself from the brick!!
i basically gave up and just left it running till the battery goes out, the next day, it is booted into the rom.
truly magical!!!!
True happened to me once when I tried to load my first rom. Just let it sit there while I'm searching the forums trying to look for some answers then voila it booted up properly
too bad i semi bricked it AGAIN!!! i really am bad at this...
flashed rogers official rom over cm. should have done some research first. still trying to fix it. but its not bad, learn a lot everything time i do something wrong.
Did you wipe prior to flashing a new rom?
Sent from my HTC Magic using XDA App
I've done the same mistake and my device hanged at rogers rom with radion 3.22 and SPL 1.76 S-ON. I've briked mine very bad that time, but yours might yet be recoverable. If you have s-off, the i think you're saved. Post your hboot info here...
Hi... I have similar problem... but my phone can't power on... in have samsung galaxy gio (GT-S5660M) after using rom manager... the phone reboot and can't start... nothings appear in the screen... I have only black screen... nothings appears
I try to remove the battery and put again... but nothing... I try to remove the sd card too and restart again... nothing... the cellphone not power on... I dont see any screen of logo, boot... nothing...
When I apple rom manager... the phone are disconnected (not charging)
Anybody can help me please ??
I dont know what happend :S

Categories

Resources