Hi i have flashed my phone with the new Artemis_v240_WWE rom, everything went ok, did hard reset etc and phone worked fine, then it locked up after about a hour so i pulled the battery and rebooted, now i cant get past the first white HTC screen with the RGD info at the bottom, it's just stuck!! I have tried to put the usb in and attach it to my laptop but it's still doing nothing?? Please can someone advise me on how to get out of this.
Thanks
ok i got a update, i can get it to the bootloader screen but it's not being seen in active sync, please help
did you remember to flash the cooks recommend radio?
no i never flashed a new radio as i thought the one i was using was ok as it worked with artemis v19 ok, is there anyway round this, if the radio is wrong?
i am getting to the bootloader screen ok but i cant flash anything cause it's not being seen in active sync?
Beatkeeper said:
i am getting to the bootloader screen ok but i cant flash anything cause it's not being seen in active sync?
Click to expand...
Click to collapse
i remember the active sync will not show anything if you enter the three-color bootloader screen...
try to flash a new rom...
so long as the white area says usb you can flash.
Related
Hi
Yes, I joined the "Bricked my Artemis" club.
Problem is what do I do now? It says "Load the original vendor ROM" in this forum but how? I don't have the luxury of ActiveSync anymore. I tried connecting via mtty and that worked. I've tried to reset there and it took the commands but when I reset it still only shows the vendor screen.
I have downloaded a software package from the vendor that branded my phone but it's the normal AS update tool. I just realized my Bootloader Screen (three colors, you know) changed to a grey screen with a progress bar hanging at 0%. What the?
I read somewhere that perhaps my bootloader is too new. But how do I downgrade without AS?
I hope you can help me. I need the damn phone for my job...
Edit: I managed to get an original ROM onto it again, so please ignore this. Although I'm still trying to find out how to get USPL to cooperate...
have the same problem
Hi, how have you solved the issue. It came up to be the same problem with me as well. Thanks Radas
Kokuyo said:
Hi
Yes, I joined the "Bricked my Artemis" club.
Problem is what do I do now? It says "Load the original vendor ROM" in this forum but how? I don't have the luxury of ActiveSync anymore. I tried connecting via mtty and that worked. I've tried to reset there and it took the commands but when I reset it still only shows the vendor screen.
I have downloaded a software package from the vendor that branded my phone but it's the normal AS update tool. I just realized my Bootloader Screen (three colors, you know) changed to a grey screen with a progress bar hanging at 0%. What the?
I read somewhere that perhaps my bootloader is too new. But how do I downgrade without AS?
I hope you can help me. I need the damn phone for my job...
Edit: I managed to get an original ROM onto it again, so please ignore this. Although I'm still trying to find out how to get USPL to cooperate...
Click to expand...
Click to collapse
I have a Dopod 818pro that was flashed with the wrong ROM and now all I get to is the DOPOD splash screen. I can get to the TRI color screen by pushing the camera and power button.
I have tried hard reset but seems the OS is missing from the phone.
I have the original ROM for my phone on my PC but can not use active sync as the phone does not go further than the SPLASH screen.
How can I reload my original ROM using the SD card.
Any help would be appreciated.
Thanks
Canada59
use the tricolor screen even though active sync doesnt see it it still flashes but u need to use the flash upgrade wizard and not the cli interface one
Worked for me but i cant sae it will work 100%
Where do I find the flash upgrade wizard?
When I plug usb in, i get usb on the white band in the color screen
Tried to run the update using RUU and get ERROR 260
Thanks for your help in this
Yeah RUU same thing i was meaning that one cause theres another that uses cli but its a bit dodgy
RUU Wizard should work it never detected ma G4 but it flashed it anyway i was well chuffed cause i thought i had bricked it
I just tryed the app without the phone connected and it gave me error 260 so maybe try different cable or pc cause i had a issue with xp not detecting my phone and i had to reinstall xp just to get active sync to work properly
The main problem is that I had a bad flash, now I can not get pass bootloader screen, PC does not see device, active sync says not connected. there must be a method for loading the NK.ntf file from sd
Not came across anything like that as the SD card driver would be loaded at boot with the OS and in your case theres no OS booting it would be hard to sae it can be done but i bet someone will prove me wrong lol
Good Luck mate ill keep an eye out for anything like that though
Thanks for the help....phone is useless at the moment......
I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2
actualy the sd method needs hard spl thats all i can really provide
I appretiate it, that I did not know... I could barely find anything on how to do it even.
im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der
Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.
yea i tink i might jus throw my phone away.dis is jus gettin rediculous
NOW ITS FIXED. THANKS
Dear all,
after experimenting quite a few cooked rom, my hd2 stoped working all on a sudden. When i tried to switch it on it came only the white screen with green htc written on it. And it (white screen) stucked and used to stay on. I took the battery off and switched on again it remained same. Just before a while i tried again, now the white screen coming for a second and no more pulse. Please advice me.
Thanks in advance.
Zaman
connect your phone to your PC via ActiveSync/WMDC and run your stock ROM and see if that helps...even with no ROM on the phone Windows should still show connected
http://forum.xda-developers.com/showthread.php?t=609477
*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows SPL-1.42.HSPL, which is the HardSPL version*
Click to expand...
Click to collapse
If you get tri-colored screen you can flash any ROM that you want without ActiveSync ... one of the advantages of HSPL if you have one installed.
Thanks again,
its not the tricolour screen.
It doesn't connect with the pc through active sync. As i tried to go for another rom after it got stuck.
Really worried a bit.
Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks
Which ROM/radio are you using? If you've got HSPL installed it shouldn't be difficult to get it working again, you should just need to flash to a compatible ROM and radio.
[email protected] said:
Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks
Click to expand...
Click to collapse
If you have HSPL and can see tri-color screen on display ... just plug in usb cable (that is connected to PC) in HD2 and start flashing process again the same way that you did before. I suggest you flash some of the official ROMs.
Thanks _x_
after having seen tricoloured screen i connected it with usb cable and flashed as normal. It did work for. And the phone is alive again.
Thanks to all of you for your attention and helps.
Cheers.
Glad I could help but it is "bepe" that you should thank to for HSPL
http://forum.xda-developers.com/showthread.php?t=611433
can you also change the thread title.. Add "Fixed"
I flashed my phone and worked great, then flashed the phone to a different ROM Kumar premier and the phone was just shuting off by it self and now the phone is stuck on the page that has "core cell" design, with the red writing in the bottom left corner what do I do. Please help.
reflash
try to reflash the stock rom first to remove the core rom boot screen. after that do a task29 then flash the kumar rom again
OK so I am new at this where do i get a stock ROM and what is a task29?
Ok so Now I cant even connect to the activsync to try and flash it again.
Task29 basically wipes all traces of the ROM/OS (not the radio) off the device. Now it's easy to do, using this .exe by doloop.
(remember, afterwords you will not have an OS on the phone. Just the splash screen you're looking at now)
Here's the thread as well, might want to read that to understand it better.
jsfengine said:
Ok so Now I cant even connect to the activsync to try and flash it again.
Click to expand...
Click to collapse
no need for active sync connection, , from here on, till you fix it, do everything from bootloader. So long as it says 'usb' in bootloader, flashing will work.
OK so I just have never heard of bootloader or just never heard used like that please point in that direction. If you cant do it from activsync then how do you do it if cant connect to the computer.
hold the volume down button while turning on will get you to the bootloader
and the stock rom you're looking for is in the the sub forum list.
OK so I am ready to do this but man I still have no way to connect to my computer to do it. The phone and the computer are not talking without activsync, so I am not sure how to do it without this HELP ME PLEASE.
OK so i messed this up bad a taks29 this thing without a stock rom on it and no it stuck on that damn screen and will not connect to my computer to flash it please help me
can you go into the boot loader? the tricolors screen? when you plug the cable do you see USB at the bottom? if you do then you are connected and ready to flash
jsfengine said:
OK so i messed this up bad a taks29 this thing without a stock rom on it and no it stuck on that damn screen and will not connect to my computer to flash it please help me
Click to expand...
Click to collapse
Everything you are trying to do has been said in this thread..
Task29 will leave you with ONLY the splash screen (and radio) and if you don't go into bootloader when you restart (hold volume down) it will keep going to that screen and your PC won't be able to connect. So restart (power off then power on while holding volume down until tricolor screen)
All makin sense now?
Thank you so much I got it working thanks for all the help
Ok so I am having issues with the phone just shutting off and restarting while i am making phone calls. Do you think that this is the flash or just the phone itself? Do you think that it is the ROM? Thanks
try to reflash the rom