Here's a tricky problem, need expertise!! Kind of urgent.. - Wing, P4350 General

I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2

actualy the sd method needs hard spl thats all i can really provide

I appretiate it, that I did not know... I could barely find anything on how to do it even.

im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der

Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.

yea i tink i might jus throw my phone away.dis is jus gettin rediculous

Related

Bricked Phone

Dear people,
I am really searching all day how to unbrick my device, I tried everything, and still nothing worked so far. I got a phone from a friend who tried to update the software and probably removed the cable while flashing. Now when I turn on the phone the only thing I see is the boot logo and nothing happens after.
It is possible to go into the boot-modus (with the 4 colors). This way it worked for me to make a USB-connection with my PC. I tried a couple of roms but nothing worked so far, everytime when I try to flash the device, it will jump to the grey screen with the % bar and then I wait for it to go to the 100%, but when it goes to 1% the phone instantly reboots, this happens everytime I try to flash the device. After it reboots it shows the boot-screen (logo of the half-flashed rom)
I hope you got an answer for me to fix this phone. Like I said I was searching all day for an answer and tried several things but nothing worked so far, any suggestions? Please...
Hi,
Yes I tried the WM5 rom, but the same thing happened, after 1% the phone rebooted...
Hold on, trying another one right now that seems to work...
Okay I managed to fix the one using another official ROM
this one:
http://www.smartmobility.nl/_BIN/TRI_DT_NLD_1234042_103_6275_1380011_108_Ship.zip
Thnx at3m
You have to flash Hard SPL: http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
Happend to me once, and after flashing this, never again.
chalid said:
You have to flash Hard SPL: http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
Happend to me once, and after flashing this, never again.
Click to expand...
Click to collapse
Yeah after I put the official rom on again you need to hard-spl it. thnx ^^

need help...i have no idea whats wrong with my htc6800 stuck in the tri colored scree

ok i have a issue with my fone my phone is stuck on the tri-colored screen which says:
TITA100
SPL-1.20.01ipro
well i am as u can see im not good with tech. stuff like this but i would like sum advice or ideas on how to fix my problem. well here is how it all happened. my fone started off fine, out of the blue it started turning off by itself, then coming back on. it will reboot fine then as soon as i touch the screen or try to text or call it shut off on me. first i thought my battery was dying. that didnt work kept it on the charger switched out the battery, still nothing ended up doing the same. so a fren told me to hard reset or press the ok button pwr n the reset button at bottom using the stylst. now im stuck in bootloader mode after i ran a program:
HARD-SPL-MFG
and was told to flash the fone, which i had no idea what to do the person who was helping me i didnt hear frm again n i was stuck in this tricolored screen what should i do? i just want my phone up and running so i can use it once again...if thats possible..it be great i love the phone n dnt want the money i invested into it wasted
thank you soo much,
If I had to guess, it sounds like you have installed a SPL that is not compatible with your existing radio and rom.
First thing is I would try downloading the stock rom for your phone, I believe you can download this from HTC's website, I would download the newest and the one prior to it. Try installing the older of the 2 first since your SPL that you do have is older, and if it fails to install, then try the newer of the two.
If it still fails, come back here and I'm sure somebody else can give you more advice.
BTC

Help, my device is broken?

My Touch HD doesnt respond, it hangs and restarts itself all the time. Today it chrashed totally and I cant start it no more. It comes to the text "smart mobility" then the softwareinfo in the right lower corner pops up and nothing more happens..
I cant do a hardreset. (tried with volumebuttons and powerbutton at the same time)
I cant upgrade the software..
Anyone had this issue before?
Servicecentre?
Sad times...
Cokey,
Can you even put it into the bootloader mode?
Cheers.
Ehrm, whats bootloader mode?
hold vol down, and press power on (keep holding volume down until screen comes on)
you should see a screen of 3 coloured bars
if you can do this, you should be also able to do hard reset. for a hard reset make sure you hold both the volume buttons down, and keep them held after you press power on
Tom
Okey, havent tried that yet. But hardreset wont work, with both volumekeys and power on...
I've just tried that bootloader mode and that works but a hardreset isnt working. It starts up as written above then the display fades out a bit. Nothing more happens...
Darn it...
Cokey said:
I've just tried that bootloader mode and that works but a hardreset isnt working. It starts up as written above then the display fades out a bit. Nothing more happens...
Darn it...
Click to expand...
Click to collapse
Cokey,
All is not lost, don't worry. If you can get into Bootloader mode, then you will be able to flash a new ROM onto it. Go to the ROM section and follow crackwhore's very detailed guide.
Have fun flashing!
Cheers.
PoisonWolf said:
.
Click to expand...
Click to collapse
Thx for the help...
After maybee 20 hardresets starts it finally started...
All seems ok with it right now... Will leave it on over the night so Im sure it wont hang/restart again..
Again thx for the help..
(Flashing is something I wanna try but I really want my OS to be in Swedish )
I have the same issues. I am constantly reflashing the ROM because the phone will not last more than a day before being stuck on the Smart Mobility screen.
I have been flashing all of Dutty's different ROMs including LEO R4 and WM 6.5 R14 Turbo, WM 6.1 etc every day for the past week. It still freezes daily and when reboot, it gets stuck on Smart Mobility Screen. I am ready to throw it in the bin!
Anyone got any ideas. Flashing ROMs isn't working or fixing it as I have tried all sorts. I have also upgraded the Radio yesterday, still doesn't help. Tried also a new SD card, again, still freezes.
jchiou99 said:
I have the same issues. I am constantly reflashing the ROM because the phone will not last more than a day before being stuck on the Smart Mobility screen.
I have been flashing all of Dutty's different ROMs including LEO R4 and WM 6.5 R14 Turbo, WM 6.1 etc every day for the past week. It still freezes daily and when reboot, it gets stuck on Smart Mobility Screen. I am ready to throw it in the bin!
Anyone got any ideas. Flashing ROMs isn't working or fixing it as I have tried all sorts. I have also upgraded the Radio yesterday, still doesn't help. Tried also a new SD card, again, still freezes.
Click to expand...
Click to collapse
Have you tried reverting back to stock rom to see if problem persists? If so, return device under warranty
J,
USPL or HSPL? Do you install any applications, or do you leave it as it is and it still crashes in a day?
Cheers.
jchiou99 said:
I have the same issues. I am constantly reflashing the ROM because the phone will not last more than a day before being stuck on the Smart Mobility screen.
I have been flashing all of Dutty's different ROMs including LEO R4 and WM 6.5 R14 Turbo, WM 6.1 etc every day for the past week. It still freezes daily and when reboot, it gets stuck on Smart Mobility Screen. I am ready to throw it in the bin!
Anyone got any ideas. Flashing ROMs isn't working or fixing it as I have tried all sorts. I have also upgraded the Radio yesterday, still doesn't help. Tried also a new SD card, again, still freezes.
Click to expand...
Click to collapse
No luck
I think my warranty is out the window when I tampered with the screws and broke the VOID Warranty sticker.
I have used both USPL and HSPL and same issues occurs. I think I have narrowed it down... if I don't touch the onboard memory, ie not install anything to the onboard memory or touch it too much in that area, then it will tend to be okay. It starts to freeze and lock up at Smart Mobility Screen whenever I copy stuff or active sync etc.... so far anyway.
Looks like its going in the bin... last resort tomorrow, revert back to stock rom and see how long it lasts.

[Q] Once it booted, now always boot loop | SOLVED

Hello,
I searched the internet for about 2 hours and couldn't find a solution, thats the reason why im opening this thread, im stuck.
Before i did following steps, the phone wouldt boot into winmo, it was constantly rebooting.
So i tried to flash a new rom.
It was really difficult to flash the phone because i couldnt use hspl it froze every time i tried, so i got uspl working after a few attempts. I flashed this rom:
http://forum.xda-developers.com/showthread.php?t=671277
after sucesfully flashing i turned the phone on, same issue, it got stuck in a boot loop.
So i decided to get the phone fully charged again an leave it for like an hour, after the break i restarted it and it worked nicely. So it was time to get the sd card in the slot and the sim, so i did a quick restart... but since then im having the same issues again, stuck in a boot loop, no matter what i do, even if i take out all the cards still happens. I tried to wait and charge, but no sucess...
i have no idea why the phone isnt starting winmo, but it drives me creazy...
32MB
SPL 1.54
anyone have any ideas, had same problems? Looking forward to hear from you.
Thanks in advance
________________________________
Found the problem, the battery connector seems to be broken, as long as i push against the battery the phone works nicely. unfortunatly this means good bye.
hi,
it´s the same problem for me. tryed different hardspl, uspl but no change.
ist restarts sometime direct after the bootloader and sometime it starts normaly and then restart.
i´ve changed the battery but it don´t solve the problem.
any suggestions?

[Q] No Bootloader, HSPL and HTC returns?

I've been using Android NAND for a while with no problems but the other day I struggled getting into bootloader. Eventually (for no obvious reason) it went in and I flashed the shipped rom. I tried bootloader again but no dice. Then I made the fatal error of flashing HSPL again only to get stuck on the O2 screen. I can't get any further.
I can't connect to the pc because it doesn't see anything and I can't get it onto bootloader to flash anything else. I've tried everything I can think of bar JTAG (which is out of my league) and I'm supposed to be sending it back to HTC tomorrow for a repair.
Question is, will HTC see HSPL installed without access to the bootloader and, if they do, will they tell me where to shove it?
..tried searching everywhere before starting a new thread...
jetsetwilly said:
I've been using Android NAND for a while with no problems but the other day I struggled getting into bootloader. Eventually (for no obvious reason) it went in and I flashed the shipped rom. I tried bootloader again but no dice. Then I made the fatal error of flashing HSPL again only to get stuck on the O2 screen. I can't get any further.
I can't connect to the pc because it doesn't see anything and I can't get it onto bootloader to flash anything else. I've tried everything I can think of bar JTAG (which is out of my league) and I'm supposed to be sending it back to HTC tomorrow for a repair.
Question is, will HTC see HSPL installed without access to the bootloader and, if they do, will they tell me where to shove it?
..tried searching everywhere before starting a new thread...
Click to expand...
Click to collapse
How did you flash shipped if you couldn't get into bootloader?
You're doing vol-down and power on right? If you get a splash you should be able to get into bootloader, because SOMETHING is telling your splash to show up.
Try putting the correct shipped on your SD and power up with vol down.
I think they will be able to tell that you modified it.
Thanks for the quick response. I'll try it again with the sd card. The only thing I can think is that the battery died on me almost as soon as I tried the sd card shipped rom. I saw the bootloader for a second and then the phone went off. When I charged it back up, no bootloader...
The problem is I've tried so many things, I'm struggling remembering the exact order of my screw up. I have a feeling after the battery died and I couldn't get it into bootloader, HSPL was working and I flashed the stock rom using USB flash.
jetsetwilly said:
Thanks for the quick response. I'll try it again with the sd card. The only thing I can think is that the battery died on me almost as soon as I tried the sd card shipped rom. I saw the bootloader for a second and then the phone went off. When I charged it back up, no bootloader...
The problem is I've tried so many things, I'm struggling remembering the exact order of my screw up. I have a feeling after the battery died and I couldn't get it into bootloader, HSPL was working and I flashed the stock rom using USB flash.
Click to expand...
Click to collapse
Well, I've seen lots of warnings about having your battery greater than 50% while flashing, which (obviously) means that if your device has run out of juice while flashing could lead to unrepairable (by end-user) issues .
Try orangekid's advice and report back.
jetsetwilly said:
Thanks for the quick response. I'll try it again with the sd card. The only thing I can think is that the battery died on me almost as soon as I tried the sd card shipped rom. I saw the bootloader for a second and then the phone went off. When I charged it back up, no bootloader...
The problem is I've tried so many things, I'm struggling remembering the exact order of my screw up. I have a feeling after the battery died and I couldn't get it into bootloader, HSPL was working and I flashed the stock rom using USB flash.
Click to expand...
Click to collapse
when flashing from SD, SPL and radio are the first 2 things it flashes afaik, so power out right when you started flashing could be a serious issue.
Hopefully what I said above works though, if your SPL is completely fubar I have no idea what HTC will say, what I would tell them if you try to RMA is you had problems with random reboots and did a hard-reset, then when it started flashing it just turned off for no reason and now it's weird or something like that so they think it was a regular stock hard reset thing and not a "oh **** I have to restore to factory cuz I have HSPL on here" thing.
Ok, so I tried about 10 more times with no joy - at least it's consistently broken now.
Thanks guys, just hoping for an 11th hour rescue. I'll send it off tomorrow and report back the outcome with HTC. I appreciate your help. I knew the lack of charge and flashing via bootloader was going to trip me up one day.
Was HTC able to bring the phone back to its original state or were you able to do something to get the issue fixed? I have the same problem. All I did was to load prj Clean Desire v0.3.2 ROM (this ROM is the same as Cotulla's but with few fixes). This was the first time I ever attempted loading an Android ROM on to my HD2. All looked well initially. The phone was rebooted after ROM was installed. I did intial setup like facebook acct, email, wi-fi, gprs, etc. Then after few hours, the menu button (windows button in HD2) and back button quit working. Even the power button when pressed for few seconds wouldn't bring up the power off and other options. I thought a soft reset would fix it and then I pulled the battery off and restarted. All I now get is the first boot screen with "123456...go.go.go..." and then a white screen with HTC on it. Nothing more. It is stuck there. I tried getting in to bootloader, but I couldn't. Holding down the volume-down and then pressing the power button just restarts the phone as mentioned above and takes me to the HTC screen. Not sure how can I get to the bootloader. Desperately looking for help....

Categories

Resources