Database Users

MDA Stuck on Press Send to Restore...

Hi: This is my first posting and I am new on this board. I have had an MDA that I got as a gift from my Dad and I love it. However, I used it last week and for some unkown reason, it is stuck in the:
'Press Send to Restore Factory Defaults, Other Key to Quit.'
I have been trying to get past this for 4 days and am not having any luck.
I got to the Align Screen and that happened only once. Then I could not get past that. It keep showing the Align Screen and I kept tapping and it just kept going round and round from the Center Tap to the sides and back.
My battery is fully charged, I have read this forum and still I am lost. I would really appreciate any help. Thank you so much.
Toni

Do a Soft Reset or Hard Reset.
Cheers!

zabardast_1 said:
Do a Soft Reset or Hard Reset. Cheers!
Click to expand...
Click to collapse
Thank you for trying to help me. However, I have done both of the resets over and over and I keep getting the same result. 'Press send to restore factory defaults, other key to quit.'
I can get no further than that display regardless of what key or keys that I hit.
I have even tried the two ways of doing a Hard Reset:
1. Hold Com and Voice while pressing Soft Reset Button for 5 or more seconds until I get that display.
2. Hold Com, Voice and Camera while pressing Soft Reset Button for 5 or more seconds until I get that display.
I cannot get past that display regardless of what key or keys I press.
It seems frozen at that display point.

Tried again this am to hard reset my MDA. Now it goes and shows the T-Mobile screen with the IPL/SPL etc. Then goes into Windows and to the Align Screen and for some reason will not recognize the Screen Tapping to align the screen.
I did try to use my PC to recognize the MDA, but it would not. Downloaded WST and that would not recognize my MDA either. I understand that until I get past the Hard Rest my MDA will not be recognized by my PC due to ActiveSync being requried to connect my MDA to the PC. I don't know what else I can try. Search all day yesterday and could not find any solutions. Will continue today. Any suggestions, Please. Thank you.

Tonis said:
Tried again this am to hard reset my MDA. Now it goes and shows the T-Mobile screen with the IPL/SPL etc. Then goes into Windows and to the Align Screen and for some reason will not recognize the Screen Tapping to align the screen.
I did try to use my PC to recognize the MDA, but it would not. Downloaded WST and that would not recognize my MDA either. I understand that until I get past the Hard Rest my MDA will not be recognized by my PC due to ActiveSync being requried to connect my MDA to the PC. I don't know what else I can try. Search all day yesterday and could not find any solutions. Will continue today. Any suggestions, Please. Thank you.
Click to expand...
Click to collapse
Use the love rom to set phone back to "zero". Therefore you must press press the voice and camera buttons if joy reset youre phone.
You get some collored bloks om youre phone and then you can use the love rom.
After that you can use youre original rom updater

sleurhut said:
Use the love rom to set phone back to "zero". Therefore you must press press the voice and camera buttons if joy reset youre phone.
You get some collored bloks om youre phone and then you can use the love rom.
After that you can use youre original rom updater
Click to expand...
Click to collapse
Did a search for Love Rom and Wizard_Love ROM and only came up with 103 results consisting of some Threads with 1570, 898, 618,787, 893, 464........postings on the first page for Threads 1-25.
Now I do have a Red, Green, Blue, White Screen with RUU in the top right corner of the Red Bar with IPL 2.26 and SPL 2.26 in the Red Bar. Nothing is in the Green, Blue or White bar.
I tried to Hard Reset and Soft Rest and nothing happens. I removed my Battery and then tried again and still nothing happens?
Where can I find Wizard_Love ROM and what do I do when I find it. My PC will not recognize my MDA and I used WST and that cannot located my MDA.
I am at a complete loss of what to do next.
Thank you in advance for taking the time to try to help me get my phone operational.

sleurhut
Use the love rom to set phone back to "zero".
do not confuse guys with this statement.Wizard_love_Rom is a patched rom which is flashed to recover back the phone in some stuck up phones,but it doesn't set the phone back to 'ZERO',but its an italian language rom.
Tonis
The multicolor screen is the bootloaders with IPL/SPL 2.26 displayed,this is the mode from where you can flash another rom.There's no need to get the phone activesync,cuz it won't activesync in bootloaders.But when in bootloaders,connect the phone with pc via usb cable and watch small usb appear at the bottom of the bootloaders,if its there then you are good to go and can flash a rom.
Now,download the official T-mobile 2.26 from the link below and get the phone in bootloaders,check usb appear at the bottom and flash it to recover back to the default status of the phone.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!

zabardast_1 said:
sleurhut
Use the love rom to set phone back to "zero".
do not confuse guys with this statement.Wizard_love_Rom is a patched rom which is flashed to recover back the phone in some stuck up phones,but it doesn't set the phone back to 'ZERO',but its an italian language rom.
Tonis
The multicolor screen is the bootloaders with IPL/SPL 2.26 displayed,this is the mode from where you can flash another rom.There's no need to get the phone activesync,cuz it won't activesync in bootloaders.But when in bootloaders,connect the phone with pc via usb cable and watch small usb appear at the bottom of the bootloaders,if its there then you are good to go and can flash a rom.
Now,download the official T-mobile 2.26 from the link below and get the phone in bootloaders,check usb appear at the bottom and flash it to recover back to the default status of the phone.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
Click to expand...
Click to collapse
Thank you again for your help. Prior to this posting I found:
epimazzo Posting at: http://forum.xda-developers.com/showthread.php?t=294107&highlight=bootloader #1 and this is what cleared up my problem and now my MDA is running GREAT!!!!!!!!
This was the same thing that you posted for me, too.
Maybe some of you are already aware of this procedure, maybe not.
Anyway, it worked for me and I decided to share how to do it. Simple.
This procedure should only be used in case you really need enter into a bootloader mode (Red, Green, Blue, White Screen) and all other ways to do it has failed! Hold Camera button is one of these I am mentioning.
1. Make sure your Phone is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your Phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
So, Thank you all for your time and help. I do hope this helps others to find a way to correct their problems.

Thanks !
Yes.thats exactly what I wanted you to do
I'm glad you got it up and running fine
Cheers!

zabardast_1 said:
sleurhut
Use the love rom to set phone back to "zero".
do not confuse guys with this statement.Wizard_love_Rom is a patched rom which is flashed to recover back the phone in some stuck up phones,but it doesn't set the phone back to 'ZERO',but its an italian language rom.
Tonis
The multicolor screen is the bootloaders with IPL/SPL 2.26 displayed,this is the mode from where you can flash another rom.There's no need to get the phone activesync,cuz it won't activesync in bootloaders.But when in bootloaders,connect the phone with pc via usb cable and watch small usb appear at the bottom of the bootloaders,if its there then you are good to go and can flash a rom.
Now,download the official T-mobile 2.26 from the link below and get the phone in bootloaders,check usb appear at the bottom and flash it to recover back to the default status of the phone.
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
Click to expand...
Click to collapse
I does everything you do but
I don't have the cradle :S
so that means a problem?
or there a nother way?

Hi!
I got an mada vario 4. How can I upgrade the rom on it? Or can I change the t-mobile touch flo to manila 2.5? Thx! Zoli

HTC Touch HD error

Hi
I am sure you will all tell me there are a million threads like this out there and to follow the steps previously posted but I think I have tried everything.
So I have a touch HD.
If I hold the volume + and - and press the power button I sometimes get it to enter the menu where it will go to the hard reset menu. If I then press the + volume button as requested this does nothing and then it returns to the red, green, blue and white screen looping round.
If I plug the phone into the power or my PC I get the red, green, blue and white screen looping continuously. I cannot get the phone just to charge.
I have been to the HTC site to get a ROM using my serial number but it tells me that it is invalid for my type of phone??!!
I have downloaded numerous ROMS from this site and they just wont install. In the installation procedure it doesn't recognise that I have a ROM there so it is obviously corrupted. At the end of this installation not working I have tried the recovery option which it says completes but then it wont installation the ROM after this and so continues to loop in the red, green, blue and white screen.
My SPL version is 1.14.0000
A step by step solution would be massively appreciated.
Thanks for reading!!
Just for further info. When I plug the phone into the PC I can't get it to connect via active sync as it just keeps reloading the Blue, Red, Green and White screen.
I have tried the mtty.exe fix running relevant tasks but the connection isn't there for long enough without it reloading the 4 coloured screen
help!!!!!!!!!!!!!!!!!!!!!!!!!!!

Finally managed to 'update' the ROM using RUU_BlackStone_Orange_UK_1.14.405.3 how my phone still stays on the red, green, blue and white screen argh!!!
I really thought that once it had installed that would be it fixed!!
Any suggestions?

Someone please help!!
Can anyone help as I really dont know what I can do!
The only thing that I can get to communicate with the phone is the standard orange ROM. Even though this has supposedly installed correctly I am still stuck on the Tri-Colour screen!!

I advice you to do the Task29..
This completely erases your system partition and you can flash a new fresh ROM...and a new radio of course since the Task29 removes everything...
I will give you just a little guide - there are millions of guides how to flash.
1. Download: Radio 1.17 (!!!FOR BLACKSTONE!!!), USPL 2.5, ROM you wish to flash, Task29
2. In the bootloader (RGB screen) connect your USB cable and wait until "serial" changes to "USB", then run USPL and wait...phone reboots and you will see it say USPL at the top...
3. Run task29 with radio 1.17 (*.nbh file) in the same folder - google "how to task 29 xda" or something like that and you should find a guide (I think I read a decent one in Leo forum)
4. After you have Task29ed and flashed radio 1.17 enter bootloader again, run USPL and flash the ROM you want...I recommend Topix 3.6 for example - I use that one and it is pretty good.
You should be OK after doing this...google a lot while going through this guide because you will probably get stuck at some points...this is not detailed guide...just a simple one...
I hope it helps you.

Sopis is a HTC God!!!
Sopis!!!
Thankyou so very very very very very very very very very much!!!
Absolutely brilliant!!! I really didnt think I was going to rescue my phone!!
If your ever in Leeds I owe you a pint!!!
Thanks again

How to fix an HD2 that Freezes at the splash screen and won't boot

HI,
I just had this problem and I saw that a ton of others had it too. It was where my phone would stop at the windows screen and not boot, and my PC wouldn't read the phone so I couldn't load a new rom or Hard SPL. How I fixed it was by getting my phone into bootloader mode, (the multi colored screen). Here's how to do it.
While phone is Off:
Hold Volume down & press power button
While phone is On
Hold Volume down & press Reset Button (meaning the little yellow button by the battery that you have to press with a pen to soft reset it)
Once your on the bootloader screen, plug your phone into your PC, you will hear the ding that the computer recognized it but your Windows Mobile desktop software will still say your not connected, don't worry about that,, you are connected. After that, just pick whatever rom you want, then just install it like normal. and it works. If your not running a rom, do the same but install hard SPL instead of a ROM.
I hope this helps,
As long as your phone turns on at least to the opening screen there is hope.
kn0t.

i had that problem, my phone was stuck on stock together splash screen, but I just called up tmo and they have sent me a new hd2.

Three words. I LOVE YOU! well not really since I'm not gay ha!
By the way This also works for the HTC Imagio!

can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?

waigstar said:
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
Click to expand...
Click to collapse
Ok first off what ROM do you have and what SPL does it show when you are in the muticolor bootloader screen? Secound if you are trying to flash a ROM yse right clicking the .exe file and selecting run as adminastrator is a good idea. l

I had the same problem.. what usually helps for me is when it gets stuck.. pull out the battery and give it a solid 15-20 minutes.. and then turn it on and do nothing up until after it has booted

i do the battery thing but i cant go on doing this , i put a little txt or phone call and the phone goes bonkers and heats up,nightmare!
ok on the tri colour screen it says
PBB110 HX-BC
SPL-S.08.0000 8G XE
MICRO(LED) 0X05
MICROP(TOUCH)
SERIAL
AH!! just got into the boatloader screen !! by pressing volume up and down together~! rest it! but i need to wait cos ive pulled the battery again!!!

I am having the same issue. I had a android rom then was finally able to flash via sd the stock rom, but it would just freeze on splash screen when trying to boot. Now when I try to flash rom again it will start and freeze on 1%. Any suggestions?

Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol

stormohio said:
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
Click to expand...
Click to collapse
Ok try going to windowsmobile.com/getstarted and download and install the latest version of ActiveSync or Windows Mobile Device Center (WMDC) , wich ever one you have to have for your computer, and install it on your computer as they have updated USB drivers for your HD2.

have you tried loading a rom from the root of your memory card LEOimg.nbh?

i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken

melodicstealer said:
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
Click to expand...
Click to collapse
You need to put your phone into bootloader then your computer will recognize it. Hold the volume down button down while you power on the phone and the multicolor bootloader will come up. Next connect your HD2 to your computer via your USB cable. Wait for the Serial in the white bar of bootloader changes to USB and then flash. If you go to the device manager of your computer while you see USB on your phone it should say HTC USB Sync if you want to be assured that you have a connection to flash with.

HELP!!!!!!

I flashed my phone and worked great, then flashed the phone to a different ROM Kumar premier and the phone was just shuting off by it self and now the phone is stuck on the page that has "core cell" design, with the red writing in the bottom left corner what do I do. Please help.

reflash
try to reflash the stock rom first to remove the core rom boot screen. after that do a task29 then flash the kumar rom again

OK so I am new at this where do i get a stock ROM and what is a task29?

Ok so Now I cant even connect to the activsync to try and flash it again.

Task29 basically wipes all traces of the ROM/OS (not the radio) off the device. Now it's easy to do, using this .exe by doloop.
(remember, afterwords you will not have an OS on the phone. Just the splash screen you're looking at now)
Here's the thread as well, might want to read that to understand it better.

jsfengine said:
Ok so Now I cant even connect to the activsync to try and flash it again.
Click to expand...
Click to collapse
no need for active sync connection, , from here on, till you fix it, do everything from bootloader. So long as it says 'usb' in bootloader, flashing will work.

OK so I just have never heard of bootloader or just never heard used like that please point in that direction. If you cant do it from activsync then how do you do it if cant connect to the computer.

hold the volume down button while turning on will get you to the bootloader
and the stock rom you're looking for is in the the sub forum list.

OK so I am ready to do this but man I still have no way to connect to my computer to do it. The phone and the computer are not talking without activsync, so I am not sure how to do it without this HELP ME PLEASE.

OK so i messed this up bad a taks29 this thing without a stock rom on it and no it stuck on that damn screen and will not connect to my computer to flash it please help me

can you go into the boot loader? the tricolors screen? when you plug the cable do you see USB at the bottom? if you do then you are connected and ready to flash

jsfengine said:
OK so i messed this up bad a taks29 this thing without a stock rom on it and no it stuck on that damn screen and will not connect to my computer to flash it please help me
Click to expand...
Click to collapse
Everything you are trying to do has been said in this thread..
Task29 will leave you with ONLY the splash screen (and radio) and if you don't go into bootloader when you restart (hold volume down) it will keep going to that screen and your PC won't be able to connect. So restart (power off then power on while holding volume down until tricolor screen)
All makin sense now?

Thank you so much I got it working thanks for all the help

Ok so I am having issues with the phone just shutting off and restarting while i am making phone calls. Do you think that this is the flash or just the phone itself? Do you think that it is the ROM? Thanks

try to reflash the rom

problem with magldr on o2 hd2

before i begin - im a complete newb at this stuff so please bare with me as im very confused. i was following this tutorial http://forum.xda-developers.com/showthread.php?t=893948 and i got to the pont where i had flashed magldr onto my hd2. but instead of booting up after it was done - it got stuck on the o2 splash screen. Only bought the phone yesterday so im a little anxious. ive tried resetting settings by holding the 2 volume buttons down while i press the power button but that didnt do anything. any help appreciated.
UPDATE: ok ive managed to flash a stock rom onto the hd2 and got it working again. ive upgraded to the latest o2 uk rom. but id stil like android on the device. Does anyone know why magldr might have crashed the phone? the phone is locked to o2 so is that a problem?

nextman6515 said:
before i begin - im a complete newb at this stuff so please bare with me as im very confused. i was following this tutorial http://forum.xda-developers.com/showthread.php?t=893948 and i got to the pont where i had flashed magldr onto my hd2. but instead of booting up after it was done - it got stuck on the o2 splash screen. Only bought the phone yesterday so im a little anxious. ive tried resetting settings by holding the 2 volume buttons down while i press the power button but that didnt do anything. any help appreciated.
Click to expand...
Click to collapse
What are the steps have you done? Basically flash HSPL to root your phone. Then flash MAGLDR. After these two you can start going to build to pick the ROM to flash.

i went back to the beginning and did everything again - i hadnt updated my radio version, which is why it was getting stuck. but the second time round everything seems to have worked fine - i now have boyppcs gingerbread rom installed. my advice to others - always READ THE INSTRUCTIONS CAREFULLY. now if only i could work out how to get that cool 3d effect on the homescreen

dont have a clue how to use magldr

How do you work it?

iiadore said:
How do you work it?
Click to expand...
Click to collapse
Again as I said in reply to your post asking what CWM is click on my guide I have linked in my sig and it will tell youi what MAGLDR iswhat each option is and what it does. I give a run down on HSPL, MAGLDR, cLK, CWM, and radio information. Plus I give detailed instructions on how to install them, plus links to where you can download them.

Help - frozen HD2
Hi
as per nextman6515, my HD2 is stuck on the o2 screen and despite numerous hard resets, it will not go beyond the 02 screen, I cannot get to the multi-colour screen anymore (volume up and power), I cannot get the phone recognised on usb or windows activesync, does anyone have any advice on getting my phone to work again, all advice will be gratefully received.
thanks

r18ball said:
Hi
as per nextman6515, my HD2 is stuck on the o2 screen and despite numerous hard resets, it will not go beyond the 02 screen, I cannot get to the multi-colour screen anymore (volume up and power), I cannot get the phone recognised on usb or windows activesync, does anyone have any advice on getting my phone to work again, all advice will be gratefully received.
thanks
Click to expand...
Click to collapse
into bootloader
connect usb lead
ignore the red bit about activesync, so long as it says usb at the bottom of the screen in bootloader, it is fine.
flash a magldr compatible radio (look it up!)
Once magldr is working, you will need to go into activesync and untick 'allow usb connections' ((or maybe thats only for windows mobile device center, , anyone?)) before you can then start using usb for android based flashing.
done.