Database Users

help me!!!!! please i can`t start my P3300

anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..

hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?

it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?

dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...

Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.

arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks

Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?

MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?

Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan

ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403

USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!

same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz

well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work

y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too

Urgent Help Needed Please! "No-Gsm" BRICKED?

i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.

please help, at least let me know if Ive got a chance of repairing it

i believe if you can get it in to bootloader mode you can flash back to original rom and start over

i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?

i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....

nope, keep getting "device not responding" or "connection error". any other sugestions?

i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.

please help someone i realy need to fix my phone

Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...

ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21

If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722

berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.

oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished

yes!!! it worked!! thank you very very much for your help!!!

how to put p3600 original - help please!

hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks

PlasticFX said:
hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
Click to expand...
Click to collapse
You need to Cid unlock your mobile to flash with **** Roms
http://forum.xda-developers.com/showthread.php?t=293957

but i have flashed with cooked rooms.. and i want to put original to send to HTC because my pda have some problems.
its only need update with original rom? must remove hard spl (olipo v1.30) ?
and how?!

i don't think you can ... as your boot screen always shows even if you flashed FULL ROM from original (include SPL, radio, rom....)

when i press cam, power and reset button, i got this:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
(no more hard-spl 1.20 i think) is this ok ?
when i power on normaly, it shows the white screen "HTC" and some numbers and radio version.
Then the screen without the numbers and goes to WM5 that I updated from the file HTC P3600_RUU_Trinity_HTC_PTG_1.23.4...blabla.....
i think my p3600 is original ? and can i sent to the manufacturer now ?
(because my screen, somethimes have some lines and i must reboot, and then, sometimes the screens stills black..) :/

[HELP] Unable to boot into Windows

After I have installed the maatiROM.V3 ROM, my phone has not been able to boot into Windows properly.
It booted into Windows the first time after I installed the ROM, however, when I tried to restore the programs and reset the device, it tries to install the ROM automatically again, however, after its all done and reset, it holds on a white screen with the HTC logo.
Can someone please give me some advice?

Download youre Original rom for youre device. and get the Leo in 3 colour screen then connect the usb and flash the Original rom back.. than it must work.

Jowan073db said:
Download youre Original rom for youre device. and get the Leo in 3 colour screen then connect the usb and flash the Original rom back.. than it must work.
Click to expand...
Click to collapse
my original version is 1.48.831.0 (71294) WWE
but I couldn't find it
I have version RUU_Leo_HKCSL_CHT_1.48.832.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but I dont know I need to use SSPL to install it or not....
I try to use SSPL to install it, but error [294] occur.....
WHAT CAN I DO???
thanks!!

kayzee said:
my original version is 1.48.831.0 (71294) WWE
but I couldn't find it
I have version RUU_Leo_HKCSL_CHT_1.48.832.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but I dont know I need to use SSPL to install it or not....
I try to use SSPL to install it, but error [294] occur.....
WHAT CAN I DO???
thanks!!
Click to expand...
Click to collapse
Just download it from HTC support site... no need to use SSPL for this as it is the original ROM...

kurniawan77 said:
Just download it from HTC support site... no need to use SSPL for this as it is the original ROM...
Click to expand...
Click to collapse
I am come from Hong Kong
Hong Kong's HTC website no download link.....
I dont know which version should I install
I got two version now
one is Official WM6.5 ROM - HTC HD2 (Leo) - English Asian Version(1.48.707.2)
the other is Leo_HKCSL_CHT_1.48.832.1-this is a chinese version which released by CSL (CSL is the provider which sell the phone to me, but my original rom is 1.48.831.0 (71294) WWE(English))
so I am very confuse now...
dont know which one is suitable....
Any idea??
thanks thanks thanks thanks so so much!!

I tried to install both official english and CSL chinese version, its show error [294].......
What should I do??????
now, the phone can get into windows(maatiROM.V3 ROM),but the phone keeping crash...and I reset it....the phone will re-install the windows(maatiROM.V3 ROM) again.... then crash again, and I reset again, and the phone re-install again.....keeping repeat crash, and I reset it, and re-install windows.......
*CRYING*
I dont know what can I do now.........

In my opinion you can try the folowing:
- Remove sim and memory card and do a hard reset (with phone off , keep holding down the volume up and volume down keys and press power button, release all butons then press volume up again to restore manufacrurer deaults)
- Try to enter in boot mode (with phone off , keep holding the volume down and press power button) then flah again your phone
- If none of these helps and you can't find the original rom then use the GOLDCARD method. So make yourself a goldcard (serch the forum and you will find how to do that), boot your phone into flash mode with goldcard inside and you will be able to flash any original rom to your device
WBR
golumbu

golumbu said:
In my opinion you can try the folowing:
- Remove sim and memory card and do a hard reset (with phone off , keep holding down the volume up and volume down keys and press power button, release all butons then press volume up again to restore manufacrurer deaults)
- Try to enter in boot mode (with phone off , keep holding the volume down and press power button) then flah again your phone
- If none of these helps and you can't find the original rom then use the GOLDCARD method. So make yourself a goldcard (serch the forum and you will find how to do that), boot your phone into flash mode with goldcard inside and you will be able to flash any original rom to your device
WBR
golumbu
Click to expand...
Click to collapse
Thanks!!!I restored the phone to manufacurer default!Seems to be ok!!
thanks so much!!!
I

kayzee said:
Thanks!!!I restored the phone to manufacurer default!Seems to be ok!!
thanks so much!!!
I
Click to expand...
Click to collapse
It happened to me and I found out it is one of the reg tweaks in combination of a cab I installed did not work with maatiROM. The rom itself is stable and I use the Premium, which version did you use?

sakiin said:
It happened to me and I found out it is one of the reg tweaks in combination of a cab I installed did not work with maatiROM. The rom itself is stable and I use the Premium, which version did you use?
Click to expand...
Click to collapse
same as you!!!
I am using premium.....

ARTEMIS , stuck only on windows mobile logo!

If anyone find a time to help me , about HTC artemis is only stuck on windows mobile screen/logo
..also phone was entering on bootloader mode , three color screen ?
3.15.0000 version T-mobile , but cant fllashing , cant uspl nothing only going to 3% and stopping there.
Any help on this please?
best.r

Hellooooo...
Masters , how to solve this problem , pleasee???????

Radio ROM curropted,
First of all
Try restoring factory settings.
1) PUSH AND HOLD the (-) and (-) buttons over the (ok) and (windows) buttons, then press and hold RESET button.
2) Release reset button. but keep (-) and (-) held.
3) A message will appear and tells you to press SEND to restore factory defaults, SEND = GREEN TEL BUTTON.
4) Press it and wait, see what will happen after, maybe once it's finished you will need a soft reset, I don't remember...
Second Try possibility -if the above will not work-
Try with flashing a new full official ROM
it might be a problem as probably you do not have USPL unlocked!
so your SPL should still be looked to 3,13 or similar.
it would give you a DEVICE ERROR if you update it, and stop at 3%.
if SPL is 1.11 so that's fine, SPL is unlocked.
just enter bootloader and flash any complete (OS + RADIO) Rom, even non factory rom.
if SPL is locked you can save your tel just trying to update and original factory rom.
example: T-Mobile UK, T-Mobile Germany, T-Mobile ....
Note that even if they are all T-Mobile they are different! (Germany is different than UK, and so...)
Desperate last choise
If all the above did not solve,
probably your Radio ROM is curropted and in a bad sector,
use MTTY tool and comands to do a low level format, and remove any residual rom tack.
Do not clean bootloader, you will need it for the new re-flash
Then enter bootloader and flash an official factory rom.
It took me 6,30 hours to save my last Artemis, wish you a quicker solution, so good luck!

mouse.co.nr , thanks for reply mate.
First i have try since from yesterday to give on the phone any fllash , i have try so much diference way to get solution but nothing happen.
The phone cant do a hard reset by presing buttons , the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000 , and i know that the phone was not cid unlock maybe , but i cant give any upsl and fllashing with fllash that phone.
Second i we try with ART_TMOUK_11311001_024990_WWE_Ship_R3 t=mobile UK , nothing happen , also only radio ARTEIMG_TMO_UK_4.1.13.251_02.92.90_RadioOnly , again nothing.
Radio only , and fllash was going to 3% and stopping.
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
..and also i have try to fllash from sd card http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r

root folder
haveri said:
..and also i have try to fllash from sd card , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
Best.r
Click to expand...
Click to collapse
...probably a problem is creating a folder with the name root, "root folder" means on your sd-card without any folders... as far as i know...
anyway, good luck trying

haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem! if it gives you the "windows mobile image" and stops there, so it's just the radio, else it's the OS and probably the radio!
do a full ROM updt, official WWE have both radio and OS.
I wish for you that your PPC doesn't stop at Windows Mobile Image (the one after boot image), I have thrown away a P3600 in this way!!! Radio was so curropted that I could not fix it anyway, nither MTTY, required a CIP programming, but I'm not good at...
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
It surprised me the first time I got a 270, try the attached uspl, I got that from the rapidshare, scanned with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked (now it speaks french!).
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck

haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem!
do a full ROM updt, official WWE have both radio and OS.
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
try the attached uspl, I got that from the rapidshare, tested with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked.
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck

no bootloader possible
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot

hds09 said:
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot
Click to expand...
Click to collapse
Hi!
Check hardware buttons,maybe one of them is broken,that's why you can't put your device in bootloader.
Make a Goldcard (search) and flash the Kaiser with Goldcard inside.It will revive your device.
BR
Scootie