Database Users

[Q] Reflashing Not Working after Android Installed

Hello,
I installed HSPL 2.8 -> Radio ROM 2.12.x -> MagLDR 1.11 -> "Stock Desire" NAND Android ROM (LEO1024)
but then the Edge/3G is not working I think is because I didn't install Radio Rom 2.15.x, so I'm trying to reflash radio rom but flasher does not recognize my hd2, I even try to flash LEO Stock Android again but I get the so famous error: Info: .\RSPL\RSPL.cpp (723), and yes I did try the "Uncheck Allow USB" on active sync I tryed on vista as well but nothing, in magldr menu I chose option 4 for usb flash, the pc recognizes it but the flashers don't...
Regards
Vcos

Just try reflashing without sync.
Reboot your phone holding volume key and enter the HSPL (the 3 color line thing)
Then run your ROM exe from PC (if it doesnt see the device on usb... just unplug and re-plug the usb in the phone)
good luck!

Dude no homo but I love you man!!, thanks it worked I was able to flash the new Radio ROM, I had to flash Android Again as well, for the error Info: .\RSPL\RSPL.cpp (723) I had to extract the files again from the rar...
Regards

[Helpe] error flash WP7

hello,
i have a error message during the flash wp7 (4 partition):
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
can you helpe me?
ps: sorry i don't speak very well english... ^^

do you have MAGLARD 1.12 installed ?

yes magldr 1.12 is installed...
task29---> ok
Rom radio 2.15--->ok
Magldr 1.12--->ok
Rom WP7---> probleme with partition 4...

I kept getting a few strange error codes, rebooted phone did a hard reset within magdlr and just kept trying turned my antivirus off and then it worked, took 4 attempts before it actually installed so don't give up mate

Had the same Error, just changed the USB port throught which I was performing the Flashing, did a Task 29, and Flashed Magldr 1.12 again, Flashed WP7 and now enjoying it

Had the same error. Tried again and all was fine. Not sure what caused it.

Code error 1279 and 956
I got the error below after install MAGLDR112 and so I ran DWI.exe.
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description:
Info: .\RSPL\RSPL.cpp (956)

I hv used WP7 on my HD2 and reflashed it to WM6.5 as i dont hv actovation key at that time.Now i hv arranged the key but i m also getting the same error. I hv tried more than 50 times but no luck. Task29 aslo failed on some blocks. plz help if anyone know the solution.i m able to flash 6.5 Roms.

I am having the same issue. I've been trying the above mentioned solutions and still no luck. I had W7 instaled before but i had change back to 6.5. For the past few weeks i have been trying to install back the W7 and i am stuck at the same error.
Any ideas?
Thank you for your help.

Solution...
You guys are probably flashing using a desktop and connecting the HD2 to the front usb port of the computer... Try using the back usb port (the usb port from the motherboard) usually the front ports from the case don't get enough power... had that error myself, and I just connected to the back and done hope this helps...

solution
Enable -
Services
4. Use Last 24 NAND

I had the same problem, just changed the USB port throught which I was performing the Flashing, did a Task 29, and Flashed Magldr 1.13 again, flashed WP7 but not working stop in flashing part 4, I connect my phone to usb port in netbook msi wind u100. Any idea?

Same error prople please please help i have tried everything i could zillion of times have not slept since the past sixteen hours please please help tell me what am i doing wrong
i was on winmo and then i flashed hspl2.08 success
then i installed latest radio 2.15 success
then i installed magldr success
then select services and select last 24 nand
select service and erase mbr
select usb flasher and i get the above error please help i just bought the hd2 yesterday

migatt said:
hello,
i have a error message during the flash wp7 (4 partition):
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
can you helpe me?
ps: sorry i don't speak very well english... ^^
Click to expand...
Click to collapse
Try to install wm 6.5, you can do task29, and it is best to install wp7 - Magldr 1.13 => Services => UseLast24NAND.

Not working
I hav tried everything
Format SD cart
Use MGRLD 1.12 and 1.13
Use 3/3 USB ports on my laptop
Trie to instal different WP7 ROM
Nothing works
HSPL ok, Radio rom OK too. I have got instaled WP7 on my HTC HD2, but i want to reinstall it and something like this happen.
I have got the same error as dude above me. I spand two days on it and still nothing work.
Have you got some other tip for solution?
OMG I cant believe it, while i was writing this post, i tried once again to flash ROM wp7 AND IT WOKRS! Some magic i thing...
What I have done was in MGLRD use LAST 24NAND.
thx all of you.

Radio and Rom flashing problem

Before I get started, I've flashed 4 different roms onto my phone before along with flashing the radio and installing Magldr, so I can't quite figure out what I'm doing wrong this time around
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Alright, I've set my phone into the bootloader, got an active connection and ran the CustomRUU.exe for both radio version 2.15 and 2.14.50 and for some reason, when completed it doesn't seem to have updated my radio. The program finishes and completes with no errors, but when I go to check in the tricolor bootloader, it's still version 2.08?
My ultimate goal is to get this ROM installed http://forum.xda-developers.com/showthread.php?t=917590 CleanDROID v2.51 - Froyo+CM
Now it says to update my radio to at least 2.12 but I don't know why it's not updating? And because of this, I cannot seem to flash the rom. When flashing the ROM, i am approached with this error:
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
I have no idea what's going on or what I should do. I don't exactly see what I'm doing wrong or what steps are missing. I've never had so much of a hassle with rom and radio flashing before, it's aggravating me and I must figure it out lol!
Thanks in advance for all the help

efeguwewe said:
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Click to expand...
Click to collapse
Firstly despite being on d right path, u've got ur info slightly wrong.
"SPL-2.08.HSPL 8G XE CotullaHSPL" is ur installed HSPL & NOT ur radio version...Assuming u were still running WInMo, u would have noticed d change in radios u flashed at the bottom of the TMobile boot-up screen...Rest assured there r no major problems here cuz it appears u've already installed d radio...
***You've Performed HSPL and installed MAGLDR 1.13....so Good.
***You also performed a CWM install but the ROM thread u posted is not a CWM build....Meaning it's a DFT build and does't need CWM installed.
Nw here's what u'll do.
>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
P.S. Flashing a dft build will remove ur cwm installation...its a known fact dat both cannot co-exist.

I installed CWm because I was planning on flashing this ROM: http://forum.xda-developers.com/showthread.php?t=933951
But I gave up because I kept on getting the following error as well:
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Click to expand...
Click to collapse
Same numbers and text
How can I check what radio I've flashed? Also, I don't think i have WinMo installed anymore as my phone just boots straight to MAGLDR after failing to load a android nand (but how can it when none is installed lol).
Since I've gone through the CustomRUU.exe for both 2.14 and 2.15, do I already have the radio flashed? Nothing went wrong and the process was completed
I've already done everything you posted before my original post, I just on getting those .RSPL errors.

>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
Click to expand...
Click to collapse
Tried it your exact way and I still get the .RSPL error

anybody have any idea what I should do?

efeguwewe said:
anybody have any idea what I should do?
Click to expand...
Click to collapse
Hmmm...Try this then.
Perform a Task29.
Flash a 2.15.50.14 radio.
Install MAGLDR 1.13.
Install CWM...(If needed & Paying attention to which particular clockwork partitioning system will work for you desired build).
Re-download the android build..(cuz i think some files might ave messed up while downloading).
Find an alternative means (e.g. thru sd card readers / thru CWM's mount storage system) to transfer the zipped build to ur memory card...Avoid using MAGLDR's inbuilt usb mass storage utility as its been reported 2 have a few issues during transfers.
If u also have a TMobile HD2, u might be interested in d build i'm currently running..It supports CWM n flashing it and or updates ave never given me issues.

Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help

nizaamh said:
Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help
Click to expand...
Click to collapse
Do you still have 2.08.hspl installed? Go back to bootloader and check it.

Android does not want to install!

Hello, please help me!! I wanted to install android on my new HTC HD2.
What I did:
Installed hardslp 2.08
Radio 2.15.50.14
MAGLDR 1.13
after installed magldr it sent me to it's menu. I select USB flasher and then go to my Android Rom unrared folder, i run DAF file. Then it starts to isntall something(1-3) seconds. says everything is done and thren reboot system and says "nand kernel open failed" and sends me back to menu.
i tried many times and with another Android but nothing helped! Tried to install Clockwork mode, same problem. Then tried to isntall 29 but this program did not want to install saying that it couldnt connect with HD2. I thought it is something wrong with my computer. I borrowed my friend's laptop and tried to install Android from his. Installing process took a little bit more time but the same problem: It congratulates me that everything is done then reboots, then kernel error appears for 1 sec and sends me back to main menu.
Then I deleted Sync program(windws phone something..) and tried new ROM. Now DAF program says me next:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Please help me !!

Hi,
Which ROM are you trying to install?
Which operating system have you got on your pc/laptop?

Are you right clicking on the DAF and selecting run as administrator?
Also when you go to USB Flasher and connect your HD2 to your computer are you giving a minute to establish a connection?

Give it a minute to establish connection, and try another Rom. Maybe your HD2 is 512 (EU), and you are trying to install ROM for 1024 HD2 (Tmobile US).
Did you read, maybe it is clockwork rom, not magldr?
Here is the link for MAGLDR flashing rom, stock Desire
http://forum.xda-developers.com/showthread.php?t=893620
it does not support ext partitions on sd card. But you can try another roms. And if you dont know how to flash it via Clockwork, here is the link
http://forum.xda-developers.com/showthread.php?t=1044830
p.s. Better ROMs are that that you flash via clockwork. Study that, it is easy.
Thanks to guys who wrote that tutorials

And here are all ROMs for HD2
http://forum.xda-developers.com/showthread.php?t=1044830

[Q] Help Needed: HD2 stuck after install MAGLDR

Hey all,
Firstly, I know there are many similar threads posted here, but none of them actually gave a solution to a problem I have.
What I did: tried to eventually put WP 7.8 using Pdaimatejam's ROM.
*My HD2 runned on WM 6.5 and was completely original
I followed all steps in chronological order:
-Installed HSPL 2.08.HSPL - Succeeded
-Installed MAGLDR - Says it succeeded
NOW, it rebooted itself, since then it always freezed at the White HTC LOGO screen.
By booting via the bootloader (Volume down+Powerbutton) I get the following information:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
I still see Serial at the bottom. When Plugging in USB it shows that it's connected with USB.
Important:
I have tried to install MAGLDR again: Same result. It says it succeeded, but is stuck after booting.
I have NEVER seen the MAGLDR bootup (The black list)
I have NOT put an SD-card when doing this all (Maybe that's the problem)
I also have NOT done anything with the Radio, because I diidn't know exactly what it is and I didn't think it was necesserily.
Any help would be very very very appreciated.
- TSeven

You can't just skip steps and expect everything to work properly. Flash radio 2.15.50.14, then I think you should be fine. Also, how are you planning on running WP7 without an SD card? Buy one or if you have one (which you should) put it in the phone. Flashing HSPL, MAGLDR, the radio etc. won't interfere with your SD or SIM card.

sdcard is WP7 main memory... you must have SDcard during flashing process in phone...
read install tutorial from my signature

Nigeldg said:
You can't just skip steps and expect everything to work properly. Flash radio 2.15.50.14, then I think you should be fine. Also, how are you planning on running WP7 without an SD card? Buy one or if you have one (which you should) put it in the phone. Flashing HSPL, MAGLDR, the radio etc. won't interfere with your SD or SIM card.
Click to expand...
Click to collapse
I'll put an 2GB SD card in my HD2. Can I now Flash my phone with Radio 2.15.50.14 and will my problem be solved now?
Or should I first Flash Radio, then HSPL again and then MAGLDR again?
Thanks for your response by the way.

soedhier007 said:
I'll put an 2GB SD card in my HD2. Can I now Flash my phone with Radio 2.15.50.14 and will my problem be solved now?
Or should I first Flash Radio, then HSPL again and then MAGLDR again?
Thanks for your response by the way.
Click to expand...
Click to collapse
is not important when you flash radio... just flash it...

I think radio then MAGLDR. You don't need to reflash HSPL though.

Thanks all for helping me out, still have to search for the 2GB sd card... I'll tell you guys Monday if it worked.

Hey all,
Thanks for all your help! I'm stuck again though..
I've put an 4gb sd card into my HD2 and have flashed my phone with
the radio (Radio_Leo_2.15.50.14)
After flashing, I didn't got the MAGLDR bootloader, so I (like Nigeldg said) flashed my phone with
MAGLDR afterwards.
After that It worked and now I'm able to enter the MAGLDR bootloader with no problems.
Entered USB Flasher and:
put a WP7 (although, that's what I thought) ROM on my phone...
The name of the file is ( 3_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5 )
After installation however the installation program gave me 3 errors:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
I AM able to boot my HD2 and Windows 8 (surprisingly 8) booted normally, untill it said that it doesn't recognise my sd card. Only
option is to shut down my HD2.
I'm now thinking to put another ROM on it, I already installed on my pc only (3_HD2_20Pdaimatejam_20Rom_20Wp7.8_20OS_207.10.8858.136_20RMT_20v8.7) from Dxdy's links.
When I deleted my sd card from my HD2 and booted it, it still booted normally with the Windows 8 loading screen and the error about the sd.
I want to delete at first that ROM and put another one on it. How can I delete it? It is ( I think) not installed on the SD.

Tseven007 said:
Hey all,
Thanks for all your help! I'm stuck again though..
I've put an 4gb sd card into my HD2 and have flashed my phone with
the radio (Radio_Leo_2.15.50.14)
After flashing, I didn't got the MAGLDR bootloader, so I (like Nigeldg said) flashed my phone with
MAGLDR afterwards.
After that It worked and now I'm able to enter the MAGLDR bootloader with no problems.
Entered USB Flasher and:
put a WP7 (although, that's what I thought) ROM on my phone...
The name of the file is ( 3_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5 )
After installation however the installation program gave me 3 errors:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
I AM able to boot my HD2 and Windows 8 (surprisingly 8) booted normally, untill it said that it doesn't recognise my sd card. Only
option is to shut down my HD2.
I'm now thinking to put another ROM on it, I already installed on my pc only (3_HD2_20Pdaimatejam_20Rom_20Wp7.8_20OS_207.10.8858.136_20RMT_20v8.7) from Dxdy's links.
When I deleted my sd card from my HD2 and booted it, it still booted normally with the Windows 8 loading screen and the error about the sd.
I want to delete at first that ROM and put another one on it. How can I delete it? It is ( I think) not installed on the SD.
Click to expand...
Click to collapse
First you must go to Magldr to activate the last 24MB
>10 Services>4 UseLast24MB
If this doesn't help, you must use another SD-Card. WP doesnt like any type of card. I use a SanDisk Class 4 card whitch works fine. Search in the forums other persons experiences with SD-Cards. Changing the ROM won't help.

Tseven007 said:
Hey all,
Thanks for all your help! I'm stuck again though..
I've put an 4gb sd card into my HD2 and have flashed my phone with
the radio (Radio_Leo_2.15.50.14)
After flashing, I didn't got the MAGLDR bootloader, so I (like Nigeldg said) flashed my phone with
MAGLDR afterwards.
After that It worked and now I'm able to enter the MAGLDR bootloader with no problems.
Entered USB Flasher and:
put a WP7 (although, that's what I thought) ROM on my phone...
The name of the file is ( 3_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5 )
After installation however the installation program gave me 3 errors:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
I AM able to boot my HD2 and Windows 8 (surprisingly 8) booted normally, untill it said that it doesn't recognise my sd card. Only
option is to shut down my HD2.
I'm now thinking to put another ROM on it, I already installed on my pc only (3_HD2_20Pdaimatejam_20Rom_20Wp7.8_20OS_207.10.8858.136_20RMT_20v8.7) from Dxdy's links.
When I deleted my sd card from my HD2 and booted it, it still booted normally with the Windows 8 loading screen and the error about the sd.
I want to delete at first that ROM and put another one on it. How can I delete it? It is ( I think) not installed on the SD.
Click to expand...
Click to collapse
also same error for me,,,,,used class 4 sd card but no use

this error dont have anything with SDcard.... you not read install instructions... read tutorial from my signature
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Click to expand...
Click to collapse

my buttons (call key etc) dont respond in magldr boot screen.
dxdy said:
this error dont have anything with SDcard.... you not read install instructions... read tutorial from my signature
Click to expand...
Click to collapse
Hi all, not too hopeful for a reply since this thread is OLD.
I just got an HTC HD2 from my brother..its used etc. anyway.. it was running fine on winmo 6.5.
I decided to checkout online for tips on mods n getting it to look and run like a newer device? I thought id go for android ICS.
So, followed the steps and got the required items first. HSPL, Radio CUU and the HD2 toolkit that includes the magldr 1.13.
the first two flashes for hspl and rom were okay, however after flashing magldr, once the fone boots up in magldr mode, i could scroll up and down using the volume buttons but i cant SELECT anything, hence.. i cant get to the USB flasher mode to complete my 'quest'.
Has anyone experienced this or know why this happens? I am currently unable to use the fone.

judheim said:
... however after flashing magldr, once the fone boots up in magldr mode, i could scroll up and down using the volume buttons but i cant SELECT anything, hence.. i cant get to the USB flasher mode to complete my 'quest'.
Has anyone experienced this or know why this happens? I am currently unable to use the fone.
Click to expand...
Click to collapse
use green button to execute selected option...

Tseven007 said:
I'll put an 2GB SD card in my HD2. Can I now Flash my phone with Radio 2.15.50.14 and will my problem be solved now?
Or should I first Flash Radio, then HSPL again and then MAGLDR again?
Thanks for your response by the way.
Click to expand...
Click to collapse
Thanks, it's worked for my HTC PB81100, it stuck at HTC boot logo and now it's fixed

nooop
Pal ... Maybe Your Phone has The Special pack That is Unable to use Magldr ...

I had the problem of White Screen after installing Magldr
I had the same problem of White Screen after installing Magldr. Turns out it was the radio so followed the instructions Here >>>> .addictivetips.com/mobile/install-2-15-50-14-radio-on-htc-hd2
<<<<
Once installed it rebooted into MAGLDR then i could install a ROM.
Love this site btw!