Database Users

Radio and Rom flashing problem

Before I get started, I've flashed 4 different roms onto my phone before along with flashing the radio and installing Magldr, so I can't quite figure out what I'm doing wrong this time around
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Alright, I've set my phone into the bootloader, got an active connection and ran the CustomRUU.exe for both radio version 2.15 and 2.14.50 and for some reason, when completed it doesn't seem to have updated my radio. The program finishes and completes with no errors, but when I go to check in the tricolor bootloader, it's still version 2.08?
My ultimate goal is to get this ROM installed http://forum.xda-developers.com/showthread.php?t=917590 CleanDROID v2.51 - Froyo+CM
Now it says to update my radio to at least 2.12 but I don't know why it's not updating? And because of this, I cannot seem to flash the rom. When flashing the ROM, i am approached with this error:
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
I have no idea what's going on or what I should do. I don't exactly see what I'm doing wrong or what steps are missing. I've never had so much of a hassle with rom and radio flashing before, it's aggravating me and I must figure it out lol!
Thanks in advance for all the help

efeguwewe said:
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Click to expand...
Click to collapse
Firstly despite being on d right path, u've got ur info slightly wrong.
"SPL-2.08.HSPL 8G XE CotullaHSPL" is ur installed HSPL & NOT ur radio version...Assuming u were still running WInMo, u would have noticed d change in radios u flashed at the bottom of the TMobile boot-up screen...Rest assured there r no major problems here cuz it appears u've already installed d radio...
***You've Performed HSPL and installed MAGLDR 1.13....so Good.
***You also performed a CWM install but the ROM thread u posted is not a CWM build....Meaning it's a DFT build and does't need CWM installed.
Nw here's what u'll do.
>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
P.S. Flashing a dft build will remove ur cwm installation...its a known fact dat both cannot co-exist.

I installed CWm because I was planning on flashing this ROM: http://forum.xda-developers.com/showthread.php?t=933951
But I gave up because I kept on getting the following error as well:
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Click to expand...
Click to collapse
Same numbers and text
How can I check what radio I've flashed? Also, I don't think i have WinMo installed anymore as my phone just boots straight to MAGLDR after failing to load a android nand (but how can it when none is installed lol).
Since I've gone through the CustomRUU.exe for both 2.14 and 2.15, do I already have the radio flashed? Nothing went wrong and the process was completed
I've already done everything you posted before my original post, I just on getting those .RSPL errors.

>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
Click to expand...
Click to collapse
Tried it your exact way and I still get the .RSPL error

anybody have any idea what I should do?

efeguwewe said:
anybody have any idea what I should do?
Click to expand...
Click to collapse
Hmmm...Try this then.
Perform a Task29.
Flash a 2.15.50.14 radio.
Install MAGLDR 1.13.
Install CWM...(If needed & Paying attention to which particular clockwork partitioning system will work for you desired build).
Re-download the android build..(cuz i think some files might ave messed up while downloading).
Find an alternative means (e.g. thru sd card readers / thru CWM's mount storage system) to transfer the zipped build to ur memory card...Avoid using MAGLDR's inbuilt usb mass storage utility as its been reported 2 have a few issues during transfers.
If u also have a TMobile HD2, u might be interested in d build i'm currently running..It supports CWM n flashing it and or updates ave never given me issues.

Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help

nizaamh said:
Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help
Click to expand...
Click to collapse
Do you still have 2.08.hspl installed? Go back to bootloader and check it.

Error 266: Unable to flash radio or ROM

Hello,
When I try to flash my radio or ROM I am getting this error:
[ERROR 266]: UPDATE ERROR
The Update Utility cannot get response from your PDA Phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone.
Click to expand...
Click to collapse
I attached a capture to this post.
Here are the details about my actual device:
LEO512 - Orange France
Radio 2.06.51.07
ROM 1.66.406.1 FRE
HSPL3 2.08.HSPL
I actually tried to flash to official ROM WWE 3.14.405.2 and radio 2.15.50.14 but none of them worked out, both failing with the described error. I tried to flash through ActiveSync and through the bootloader. I also tried to remove SD in both situation and I actually do not have SIM card in the phone.
When comes to change the SPL I do not have any problem and can switch smoothly.

When you use ActiveSync is your computer able to connect to youf HD2? If not then try a different USB port as the one you are using must not have the proper drivers for yoir HD2 installed. You can also try another computer and another USB cable.

Thanks.
Changing of USB port definitely solved the problem.

tried every thing erro 264, 266 for me
mine is still stuck i tried all of them
I have madldr 1.11 i just want to upgrade to 1.13 but no upgrade work for me
i dont know wat to do

Yenly said:
mine is still stuck i tried all of them
I have madldr 1.11 i just want to upgrade to 1.13 but no upgrade work for me
i dont know wat to do
Click to expand...
Click to collapse
You can flash MAGLDR via your SD card just like you can a ROM or radio. Just copy the MAGLDR.nbh file in the MAGLDR folder you get when you exstract the zip file you download to the root of your SD card.. Then change the name of the coppied file to leoimg.nbh. Next as you turn your HD2 on hold down the volume down button. You will see the multicolor bootloader screen come up as soon as you see the word "Searching" on the screen let go of the volume down button and follow any on screen instructions. This will flash MAGLDR 1.13 to your HD2.

Just wanted to add that I was having this problem on Win7 64bit, initially windows update tried to grab drivers. It installed something unnamed but still wouldn't run the ROM update. I switched USB ports as suggested above and then Windows Update found a Qualcomm CDMA driver and installed that. This it seems did the trick as I'm now updating.

Greetings to all.
this problem has happened to me too. site (windows) to control said activesync. Then I did it to me ...... I realized that there were some driver conflict of some programs cooking ..... Removed from (windows7) now works perfectly. Thus check the newly installed programs.

Android does not want to install!

Hello, please help me!! I wanted to install android on my new HTC HD2.
What I did:
Installed hardslp 2.08
Radio 2.15.50.14
MAGLDR 1.13
after installed magldr it sent me to it's menu. I select USB flasher and then go to my Android Rom unrared folder, i run DAF file. Then it starts to isntall something(1-3) seconds. says everything is done and thren reboot system and says "nand kernel open failed" and sends me back to menu.
i tried many times and with another Android but nothing helped! Tried to install Clockwork mode, same problem. Then tried to isntall 29 but this program did not want to install saying that it couldnt connect with HD2. I thought it is something wrong with my computer. I borrowed my friend's laptop and tried to install Android from his. Installing process took a little bit more time but the same problem: It congratulates me that everything is done then reboots, then kernel error appears for 1 sec and sends me back to main menu.
Then I deleted Sync program(windws phone something..) and tried new ROM. Now DAF program says me next:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Please help me !!

Hi,
Which ROM are you trying to install?
Which operating system have you got on your pc/laptop?

Are you right clicking on the DAF and selecting run as administrator?
Also when you go to USB Flasher and connect your HD2 to your computer are you giving a minute to establish a connection?

Give it a minute to establish connection, and try another Rom. Maybe your HD2 is 512 (EU), and you are trying to install ROM for 1024 HD2 (Tmobile US).
Did you read, maybe it is clockwork rom, not magldr?
Here is the link for MAGLDR flashing rom, stock Desire
http://forum.xda-developers.com/showthread.php?t=893620
it does not support ext partitions on sd card. But you can try another roms. And if you dont know how to flash it via Clockwork, here is the link
http://forum.xda-developers.com/showthread.php?t=1044830
p.s. Better ROMs are that that you flash via clockwork. Study that, it is easy.
Thanks to guys who wrote that tutorials

And here are all ROMs for HD2
http://forum.xda-developers.com/showthread.php?t=1044830

Broke Phone

Hello guys , how are you? I'm just misserable and in a mess. Got a new phone and something went terribly wrong while trying to flash it with the Android. I'm stuck in Magldr 1.13 and it does not want to connect to the usb. Tried TTY mode and my PC does not recognize the phone. This is what I got in the MAGLDR, DAF file .
Readme.txt for this release is missing.
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
When installing HSPL , my SPL was 2.08.0000. I selected the 2.08 HSPL. Then it updated my ROM to 2.0 from 2.10 . Radio is still at 2.08.50.
I'm the dum... that bricked his phone so please let me know if there is anything that I can do. Thanks a lot

Try goin into the standart bootloader (vol- and power)
If u get in there, u can flash a shipped WM6.5 rom again and everything is stock

Are you trying to flash a rom?
If so use USB Flasher in the MAGLDR menu

i had a problem when i tried flashing a rom through magldr USB Flasher.. computer wouldn't install it and i couldn't use it.. well.. then i tried USB Mass Storage option and after my comp installed the device i tried USB Flasher mode and VOILA! it worked!
try something like that, and upgrade that radio.. newer roms acquire newer radio to work properly..

you get that error when you dont run daf.exe as admin in vista or windows 7.
right click, go to properties, go to compatibility and choose run as admin.

yamaboy1 said:
Hello guys , how are you? I'm just misserable and in a mess. Got a new phone and something went terribly wrong while trying to flash it with the Android. I'm stuck in Magldr 1.13 and it does not want to connect to the usb. Tried TTY mode and my PC does not recognize the phone. This is what I got in the MAGLDR, DAF file .
Readme.txt for this release is missing.
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
When installing HSPL , my SPL was 2.08.0000. I selected the 2.08 HSPL. Then it updated my ROM to 2.0 from 2.10 . Radio is still at 2.08.50.
I'm the dum... that bricked his phone so please let me know if there is anything that I can do. Thanks a lot
Click to expand...
Click to collapse
Try using magldr from http://forum.xda-developers.com/showthread.php?t=1090783 here, i have fixed the problem on latest version

[Q] cannot install correct driver / do task 29

Trying to get wipe Task[29] to work from HD2 ToolKit v.3.4.1
want to install wp7.8
am geting error 260
could it be the drivers are not being loaded correctly? currently using HTC Sync1.1.66.0
------------------------
1. Rebooted into bootloader
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
> USB Mode
2. Started HD2 Toolkit
3. clicked wipe task 29
Window title says ROM update utitlity 3.27.4.3
error :
ERROR [260]: CONNECTION
The update utility cannot connect to ur PDA Phone.
------------------------ Tried
Disabled Firewall
1. ran Windows mobile Device center (WMDC)
it doesnt show anything only connection setings
inside connection setings connect via usb is checked
All 4 boxes are checked >>> nogo
All 4 box's unchecked >> nogo
2. ran hd2 toolkit and clicked wipe task29
this closes the WMDC automatically
and still ERROR [260]
Changed the drivers
------------------------ In Device Manager :
Android USB Device > My HTC > properties
Device type : Android USB
Manufacturer : HTC, Corporation
Port_#0003.Hub_#0007
Driver Version : 2.0.7.2
------------------------- Another USB Port
using another USB port, the device is not recognized
and shows under :
Other Devices > Qualcomm CDMA Tech... MSM
------------------------- HTC Sync
reinstalled HTC Sync, restart win7
----------------------
NOGO
NexusHD2-JellyBean-CM10_V1.2 on NAND upgraded to NexusHD2-JellyBean-CM10_V1.4a on NAND
via sdcard update using EXT4 and
All default setings
note : NexusHD2-JellyBean-CM10_V1.4a on NAND flashed via sdcard works gr8
----------------------
NexusHD2-JellyBean-CM10_V1.4a
HTC HD2 TMOUS
Windows 7, Magldr 1.13, Radio Rom 2.15.50.14, EXT4

reinstall WMDC or try another microUSB cable.
Try to connect usb when in bootloader mode.

also you didn't say in what mode the phone is in, , , it requires the stripey screen bootloader for task29, not the magldr screen (a common mistake)
also also, ''Qualcomm CDMA Tech'' is most often seen when the phone is bricked (such as a tmous that has had a non tmous radio flashed.)
is the phone working ok? does it say 'usb' in bootloader (stripey screen) when you connect the usb?

yaro666 said:
reinstall WMDC or try another microUSB cable.
Try to connect usb when in bootloader mode.
Click to expand...
Click to collapse
i havent tried reinstalling WMDC, will do that
samsamuel said:
also you didn't say in what mode the phone is in, , , it requires the stripey screen bootloader for task29, not the magldr screen (a common mistake)
also also, ''Qualcomm CDMA Tech'' is most often seen when the phone is bricked (such as a tmous that has had a non tmous radio flashed.)
is the phone working ok? does it say 'usb' in bootloader (stripey screen) when you connect the usb?
Click to expand...
Click to collapse
the Phone is in Bootloader mode, tricolor screen, the Radio and HSPL are mentioned at the top of this post,
like mentioned above the phone works gr8 (or read i havent seen any probs thus far with the upgraded ROM)

OLD ROM : NexusHD2-JellyBean-CM10_V1.2 (low "incoming call" ringtone volume issues, also Camcorder stopped working after a month.. )
NEW ROM : NexusHD2-JellyBean-CM10_V1.4a:good:
updated via sdcard using EXT4 and all default setings
( ROM/Data on NAND)
Havent seen any probs thus far
Since this was my First Flash, i might have used the Europe version of the Radio Rom 2.15.50.14
am not sure.. is there any way to find out.?
accidentally found a TMOUS Radio Rom 2.15.50.14 for the "first time yesterday"
How to fix this? go back to stock and then retry?
Thanks
----------------------------------------------------------
HTC HD2 TMOUS
NexusHD2-JellyBean-CM10_V1.4a
Windows 7, Magldr 1.13, Radio Rom 2.15.50.14, EXT4

samsamuel said:
also you didn't say in what mode the phone is in, , , it requires the stripey screen bootloader for task29, not the magldr screen (a common mistake)
also also, ''Qualcomm CDMA Tech'' is most often seen when the phone is bricked (such as a tmous that has had a non tmous radio flashed.)
is the phone working ok? does it say 'usb' in bootloader (stripey screen) when you connect the usb?
Click to expand...
Click to collapse
1. The phone is in Bootloader, tricolor screen, the details are mentioned at the top of this thread
While in Bootloader
2. When i try to change the drivers through "win 7 Device Manager" in auto mode, i cannot
I have to manually select the driver
i tried to install HTC sync drivers but Win wont let me, says incompatible driver
When I install google usb drivers the Bootloader Mode changes from Serial -> USB (see details in 1st post)
but when using HD2 Toolkit task 29, it gives error : 260 : connection failed
and yes i have replaced the usb cable
+ tried the same on my Win 7 laptop
NOGO