[Q] cannot install correct driver / do task 29 - HD2 General

Trying to get wipe Task[29] to work from HD2 ToolKit v.3.4.1
want to install wp7.8
am geting error 260
could it be the drivers are not being loaded correctly? currently using HTC Sync1.1.66.0
------------------------
1. Rebooted into bootloader
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
> USB Mode
2. Started HD2 Toolkit
3. clicked wipe task 29
Window title says ROM update utitlity 3.27.4.3
error :
ERROR [260]: CONNECTION
The update utility cannot connect to ur PDA Phone.
------------------------ Tried
Disabled Firewall
1. ran Windows mobile Device center (WMDC)
it doesnt show anything only connection setings
inside connection setings connect via usb is checked
All 4 boxes are checked >>> nogo
All 4 box's unchecked >> nogo
2. ran hd2 toolkit and clicked wipe task29
this closes the WMDC automatically
and still ERROR [260]
Changed the drivers
------------------------ In Device Manager :
Android USB Device > My HTC > properties
Device type : Android USB
Manufacturer : HTC, Corporation
Port_#0003.Hub_#0007
Driver Version : 2.0.7.2
------------------------- Another USB Port
using another USB port, the device is not recognized
and shows under :
Other Devices > Qualcomm CDMA Tech... MSM
------------------------- HTC Sync
reinstalled HTC Sync, restart win7
----------------------
NOGO
NexusHD2-JellyBean-CM10_V1.2 on NAND upgraded to NexusHD2-JellyBean-CM10_V1.4a on NAND
via sdcard update using EXT4 and
All default setings
note : NexusHD2-JellyBean-CM10_V1.4a on NAND flashed via sdcard works gr8
----------------------
NexusHD2-JellyBean-CM10_V1.4a
HTC HD2 TMOUS
Windows 7, Magldr 1.13, Radio Rom 2.15.50.14, EXT4

reinstall WMDC or try another microUSB cable.
Try to connect usb when in bootloader mode.

also you didn't say in what mode the phone is in, , , it requires the stripey screen bootloader for task29, not the magldr screen (a common mistake)
also also, ''Qualcomm CDMA Tech'' is most often seen when the phone is bricked (such as a tmous that has had a non tmous radio flashed.)
is the phone working ok? does it say 'usb' in bootloader (stripey screen) when you connect the usb?

yaro666 said:
reinstall WMDC or try another microUSB cable.
Try to connect usb when in bootloader mode.
Click to expand...
Click to collapse
i havent tried reinstalling WMDC, will do that
samsamuel said:
also you didn't say in what mode the phone is in, , , it requires the stripey screen bootloader for task29, not the magldr screen (a common mistake)
also also, ''Qualcomm CDMA Tech'' is most often seen when the phone is bricked (such as a tmous that has had a non tmous radio flashed.)
is the phone working ok? does it say 'usb' in bootloader (stripey screen) when you connect the usb?
Click to expand...
Click to collapse
the Phone is in Bootloader mode, tricolor screen, the Radio and HSPL are mentioned at the top of this post,
like mentioned above the phone works gr8 (or read i havent seen any probs thus far with the upgraded ROM)

OLD ROM : NexusHD2-JellyBean-CM10_V1.2 (low "incoming call" ringtone volume issues, also Camcorder stopped working after a month.. )
NEW ROM : NexusHD2-JellyBean-CM10_V1.4a:good:
updated via sdcard using EXT4 and all default setings
( ROM/Data on NAND)
Havent seen any probs thus far
Since this was my First Flash, i might have used the Europe version of the Radio Rom 2.15.50.14
am not sure.. is there any way to find out.?
accidentally found a TMOUS Radio Rom 2.15.50.14 for the "first time yesterday"
How to fix this? go back to stock and then retry?
Thanks
----------------------------------------------------------
HTC HD2 TMOUS
NexusHD2-JellyBean-CM10_V1.4a
Windows 7, Magldr 1.13, Radio Rom 2.15.50.14, EXT4

samsamuel said:
also you didn't say in what mode the phone is in, , , it requires the stripey screen bootloader for task29, not the magldr screen (a common mistake)
also also, ''Qualcomm CDMA Tech'' is most often seen when the phone is bricked (such as a tmous that has had a non tmous radio flashed.)
is the phone working ok? does it say 'usb' in bootloader (stripey screen) when you connect the usb?
Click to expand...
Click to collapse
1. The phone is in Bootloader, tricolor screen, the details are mentioned at the top of this thread
While in Bootloader
2. When i try to change the drivers through "win 7 Device Manager" in auto mode, i cannot
I have to manually select the driver
i tried to install HTC sync drivers but Win wont let me, says incompatible driver
When I install google usb drivers the Bootloader Mode changes from Serial -> USB (see details in 1st post)
but when using HD2 Toolkit task 29, it gives error : 260 : connection failed
and yes i have replaced the usb cable
+ tried the same on my Win 7 laptop
NOGO

Related

[Q] Reflashing Not Working after Android Installed

Hello,
I installed HSPL 2.8 -> Radio ROM 2.12.x -> MagLDR 1.11 -> "Stock Desire" NAND Android ROM (LEO1024)
but then the Edge/3G is not working I think is because I didn't install Radio Rom 2.15.x, so I'm trying to reflash radio rom but flasher does not recognize my hd2, I even try to flash LEO Stock Android again but I get the so famous error: Info: .\RSPL\RSPL.cpp (723), and yes I did try the "Uncheck Allow USB" on active sync I tryed on vista as well but nothing, in magldr menu I chose option 4 for usb flash, the pc recognizes it but the flashers don't...
Regards
Vcos
Just try reflashing without sync.
Reboot your phone holding volume key and enter the HSPL (the 3 color line thing)
Then run your ROM exe from PC (if it doesnt see the device on usb... just unplug and re-plug the usb in the phone)
good luck!
Dude no homo but I love you man!!, thanks it worked I was able to flash the new Radio ROM, I had to flash Android Again as well, for the error Info: .\RSPL\RSPL.cpp (723) I had to extract the files again from the rar...
Regards

[Q]NAND with MAGDLR 1.12, USB Problem

Okay I have WP7 on my HTC HD2, as well as MAGDLR 1.12 and latest .50. radio.
Now here are problems.
Can not install new rom (DAF.exe) even tho phone connects to computer and there is USB...USB
DAF.exe throws error USB Init Failed
Now same happens in bootloader. Can't flash nor magdlr 1.11 nor anything else from there. On computer there is usb device cdma qualcom or soething but drivers are missing for that.
I have installed android sdk and WMDC with usb connection allowed checkbox ticked.
Is there another driver that I missed or something?
finally downgraded to magdlr 1.11 and reinstalled hspl.
Still rom installers cant seem to see the device.
Device shows
USB...USB
Uncheck allow usb connections.
If this doesn't help, try searching here the exact words in the error message you get.
Sent from my DL DesireZ v2.6 using XDA App
FInally flashed it to stock after installing everything then hspl reinstalled and back to 1.11 android.
hello i had this same problem trying to update 1.13 and found that the ext3 partition was larger than 1024mb - it seems to create problems.
i used minitool partition wizard to set it back to less than 1024mb for ext3 and the rest for fat32 partition.
after this the card was recognized in flasher mode without any issue and i could update.
hope that helps someone

Problem with using MAGLDR112

I'm having problems installing windows phone 7/Android on my HTC HD2 T-mobile USA I have SPL-2.08.HSPL but at the top it says SS-B3 when in the bootloader, my radio is 2.12
The problem is that when I try to install 'MAGLDR112' in boot loader it gives me a error and says my usb isn't connected etc . I even tried turning on the phone normally and setting it to active sync - it just brings me to the bootloader and the progress stays at 0% and eventually stops and says theres a error
I read that you must have radio 2.15 but when I try to install the radio 2.15 the same thing happens like the magldr112
Try updating your drivers on the pc. Go to bootloader and connect your phone. There should be a message on your pc if drivers are missing. And do not use magldr 1.12, install version 1.13
Also are you sure it says "2.08.hspl" and not 2.08.0000" cos hanging at 0% often means no hspl.

[Q] What i can do please?

Hi everyone! At first sorry because my english is not better than my french
My problem: I have an HTC hd2 with a white screen and the SPL 1.42.0000 (i can go to bootloader). I google it and can't find any solution, i tried to instal HSPL (with hspl2/3/4) without success (usb fail connection) i have the same error with an task29, and an hd2toolkit. I tried to instal from sdcard but i have the error "radio v2 fail".
I think this is a problem at height of XDA developers ^^
PS:I tried to change Computer or usb port and execute as administrator but nothing...
If you coul help me it will be realy nice.
is the phone recognized in device manager? If not its a driver problem.
also do the usual ( verify its not the usb cable, try different usb port,) if drivers are ok
thank you for your help
The computer recognize the device but without OS (white screen) i can't do anythings with Activesync, i tried other computers and other usb port/cable but nothing. I think isn't a driver's problem because the instalation with sd card don't work.
Anis92 said:
The computer recognize the device but without OS (white screen) i can't do anythings with Activesync, i tried other computers and other usb port/cable but nothing. I think isn't a driver's problem because the instalation with sd card don't work.
Click to expand...
Click to collapse
Don't understand what you mean by "white screen"?
Try installing a stock winmo for you device to make sure everything is ok...
i tried to instal an official htc rom from sd card but it doesn't work, by "white screen" i just wanted to say that when i turn on my phone the screen is white.
It sounds like you have done a Task 29 and you do not have a ROM on your HD2 right now. This is why you just boot to the white screen.
You do npot have to use Active Sync or Windows Mobile Device Center to flash via RUU. You just have to have them installed because the haqve the USB drivers for the HD2's WINCE Bootloader in the programs and they install the drivers when you install the program.
The drivers in Active Sync and WMDC allow you to have a HTC Sync connection in the bootloader. Just boot into the bootloader by holding down the volume down button while powering on yuour HD2. Next connect your HD2 to your computer via USB cable. Wait and watch for the Serial in the white bar of the bootloader to change to USB. When you see USB you can run a RUU.
Now to address your 1.42.0000 SPL, this is a older SPL version and you may have to keep trying different RUUs until you get one that will flash. Just make sure if you have a T-Mobile HD2 that you do not flash any radio version below 2.08.50.?? or any radio version that has a 51 in the radio where the 50 is in the first radio I mentioned, or you will brick your T-Mobile HD2. Look for the radio version in the RUU name it will be there.
Sometimes the HD2 develops what is referred to as a "stuck radio" when they have these early SPL versions like yours. This is why I say you may just have to keep trying different RUUs until you find one that will flash.

[Q] Stuck in MAGLDR 1.11

Hi!
I've been using an Andriod NAND for like 2 years now and decided to upgrade to IcecreamSandwich. I installed HSPL 2.08 which I believe I had before anyway. Then I tried updating my radio but I get connection error 262. Apparently my phone wouldn't synch with WinMobileDeviceCenter. When I bootload I get serial and when I plugin it changes USB. But device doesn't get recognized. after rebooting I can start my Android no longer - MAGLDR 1.11 says ...boot mount failed. So I'm stuck in MAGLDR 1.11 and I can't ever restore to WinMobile original ROM. Any ideas?
slickie said:
Hi!
I've been using an Andriod NAND for like 2 years now and decided to upgrade to IcecreamSandwich. I installed HSPL 2.08 which I believe I had before anyway. Then I tried updating my radio but I get connection error 262. Apparently my phone wouldn't synch with WinMobileDeviceCenter. When I bootload I get serial and when I plugin it changes USB. But device doesn't get recognized. after rebooting I can start my Android no longer - MAGLDR 1.11 says ...boot mount failed. So I'm stuck in MAGLDR 1.11 and I can't ever restore to WinMobile original ROM. Any ideas?
Click to expand...
Click to collapse
if you put the phone in bootloader (4 colors Screen - HSPL 2.08 exc..) and show up USB when you connect it to the PC, it should be recognized from the application flasher, no PC.
Try to go in bootloader and when you connect the phone to your pc and when show up USB try to upgade and flash MAGLDR 1.13, (no MAGLDR 1.11 the old one) the last one.
Are you sure you used the right Radio for Leo?
thanks
eclyptos said:
if you put the phone in bootloader (4 colors Screen - HSPL 2.08 exc..) and show up USB when you connect it to the PC, it should be recognized from the application flasher, no PC.
Try to go in bootloader and when you connect the phone to your pc and when show up USB try to upgade and flash MAGLDR 1.13, (no MAGLDR 1.11 the old one) the last one.
Are you sure you used the right Radio for Leo?
Click to expand...
Click to collapse
When I try updating either the radio or MAGLDR in the install instructions there is this step2 where I have to establish an activesynch with my phone. I can't. So when I run the update it starts but progress stays at 0% both on PC and phone screen. After a few minutes I get error 262.
I'm trying to install radio 2.15 from Jayce Ooi's Paradise
Forget about active sync, you will never get an active sync connection unless win mo is running,, ,that'snot what the instruction to "get an active sync connection" means. It means get a USB connection, which uses the active sync drivers.
Try different usb ports,,do not use a front mounted usb port,only theones inthe back of the machine.
samsamuel said:
Forget about active sync, you will never get an active sync connection unless win mo is running,, ,that'snot what the instruction to "get an active sync connection" means. It means get a USB connection, which uses the active sync drivers.
Try different usb ports,,do not use a front mounted usb port,only theones inthe back of the machine.
Click to expand...
Click to collapse
Why do I get this connection error then?
I did try different USB ports. Even tried different PCs. Same thing.
slickie said:
When I try updating either the radio or MAGLDR in the install instructions there is this step2 where I have to establish an activesynch with my phone. I can't. So when I run the update it starts but progress stays at 0% both on PC and phone screen. After a few minutes I get error 262.
I'm trying to install radio 2.15 from Jayce Ooi's Paradise
Click to expand...
Click to collapse
find another radio from XDA for HTC HD2, "radio 2.15? What this mean? from Jyce Ooi's Paradise" do not mean anything, I know Jayce and he is an amateur, not master.
You don't answer on questions given to you, if you want help, do you flash from bootloader? turn-off phone, keep pressing volume-down, press button on?
In bootloader, when you connect to pc, show up USB on the bottom of the screen?
eclyptos said:
find another radio from XDA for HTC HD2, "radio 2.15? What this mean? from Jyce Ooi's Paradise" do not mean anything, I know Jayce and he is an amateur, not master.
You don't answer on questions given to you, if you want help, do you flash from bootloader? turn-off phone, keep pressing volume-down, press button on?
In bootloader, when you connect to pc, show up USB on the bottom of the screen?
Click to expand...
Click to collapse
The same thing happens even with the original radio (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship). What question haven't I answered? Yes, I flash from bootloader and yes USB shows up on the bottom when I connect it to the PC. When the updating of the ROM image starts there is no progress - neither on the instalator, nor on my phone (it shows HTC and a progress bar with 0%). After a couple of minutes I get Error 262 and "The ROM update utility has encountered a communication errors during update process."
Is my phone bricked?
slickie said:
The same thing happens even with the original radio (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship). What question haven't I answered? Yes, I flash from bootloader and yes USB shows up on the bottom when I connect it to the PC. When the updating of the ROM image starts there is no progress - neither on the instalator, nor on my phone (it shows HTC and a progress bar with 0%). After a couple of minutes I get Error 262 and "The ROM update utility has encountered a communication errors during update process."
Is my phone bricked?
Click to expand...
Click to collapse
Bricked mean dead, no life at all, your still alive but there is some errors, you should be happy to turn-on the phone in bootloader and usb be recognized. You have to try flash ONLY Radio 2.15.50.14.
If you can't flash the radio which I told you try to erase your rom with this tool.
you can update you magldr 1.11 to 1.13
you can update you magldr 1.11 to 1.13:highfive:
even with the original radio (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_S igned_15.32.50.07U_2.07.51.22_2_Ship
Click to expand...
Click to collapse
thats not a radio, thats a rom that includes a radio, but also includes an spl, , 1.66.0000
Are you SURE it still says x.xx.HSPL in bootloader? because hanging at 0% is very often associated with not having hspl installed.
samsamuel said:
thats not a radio, thats a rom that includes a radio, but also includes an spl, , 1.66.0000
Are you SURE it still says x.xx.HSPL in bootloader? because hanging at 0% is very often associated with not having hspl installed.
Click to expand...
Click to collapse
exactly, I forgot about that!
Also if you really have x.xx HSPL is no more a problem of you Phone but of you PC, so try different OS, even XP, and still trying. IS NOT THE PHONE.

Categories

Resources