Related
Before I get started, I've flashed 4 different roms onto my phone before along with flashing the radio and installing Magldr, so I can't quite figure out what I'm doing wrong this time around
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Alright, I've set my phone into the bootloader, got an active connection and ran the CustomRUU.exe for both radio version 2.15 and 2.14.50 and for some reason, when completed it doesn't seem to have updated my radio. The program finishes and completes with no errors, but when I go to check in the tricolor bootloader, it's still version 2.08?
My ultimate goal is to get this ROM installed http://forum.xda-developers.com/showthread.php?t=917590 CleanDROID v2.51 - Froyo+CM
Now it says to update my radio to at least 2.12 but I don't know why it's not updating? And because of this, I cannot seem to flash the rom. When flashing the ROM, i am approached with this error:
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
I have no idea what's going on or what I should do. I don't exactly see what I'm doing wrong or what steps are missing. I've never had so much of a hassle with rom and radio flashing before, it's aggravating me and I must figure it out lol!
Thanks in advance for all the help
efeguwewe said:
On my phone right now - MAGLDR 1.13
Radio is SPL-2.08.HSPL 8G XE CotullaHSPL
I've also got ClockworkMod v1.3 installed
No ROM? My phone isn't booting into anything right now
Click to expand...
Click to collapse
Firstly despite being on d right path, u've got ur info slightly wrong.
"SPL-2.08.HSPL 8G XE CotullaHSPL" is ur installed HSPL & NOT ur radio version...Assuming u were still running WInMo, u would have noticed d change in radios u flashed at the bottom of the TMobile boot-up screen...Rest assured there r no major problems here cuz it appears u've already installed d radio...
***You've Performed HSPL and installed MAGLDR 1.13....so Good.
***You also performed a CWM install but the ROM thread u posted is not a CWM build....Meaning it's a DFT build and does't need CWM installed.
Nw here's what u'll do.
>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
P.S. Flashing a dft build will remove ur cwm installation...its a known fact dat both cannot co-exist.
I installed CWm because I was planning on flashing this ROM: http://forum.xda-developers.com/showthread.php?t=933951
But I gave up because I kept on getting the following error as well:
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Click to expand...
Click to collapse
Same numbers and text
How can I check what radio I've flashed? Also, I don't think i have WinMo installed anymore as my phone just boots straight to MAGLDR after failing to load a android nand (but how can it when none is installed lol).
Since I've gone through the CustomRUU.exe for both 2.14 and 2.15, do I already have the radio flashed? Nothing went wrong and the process was completed
I've already done everything you posted before my original post, I just on getting those .RSPL errors.
>>Since a 2.12.50.xx radio is recommended by the rom dev...Flash it normally (thru bootloader mode) if u haven't already....hweva check out my signature for the radio i'm using and where 2 get it.
>>Reboot ur device into MAGLDR by pressing down the power button when starting up.
>>Scroll down & select USB flasher
>>Connect phone to PC with USB cable (allow it to install drivers if necessary)
>>Then flash the ROM with the supplied DFT flasher (DAF.exe present in the downloaded folder).
>>Sit back n relax.
*** Its that simple.***
Click to expand...
Click to collapse
Tried it your exact way and I still get the .RSPL error
anybody have any idea what I should do?
efeguwewe said:
anybody have any idea what I should do?
Click to expand...
Click to collapse
Hmmm...Try this then.
Perform a Task29.
Flash a 2.15.50.14 radio.
Install MAGLDR 1.13.
Install CWM...(If needed & Paying attention to which particular clockwork partitioning system will work for you desired build).
Re-download the android build..(cuz i think some files might ave messed up while downloading).
Find an alternative means (e.g. thru sd card readers / thru CWM's mount storage system) to transfer the zipped build to ur memory card...Avoid using MAGLDR's inbuilt usb mass storage utility as its been reported 2 have a few issues during transfers.
If u also have a TMobile HD2, u might be interested in d build i'm currently running..It supports CWM n flashing it and or updates ave never given me issues.
Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help
nizaamh said:
Hi guys.
I have been going thru the threads and cant seem to find a solution to my problem.
I am currently dualbooting between wp7 and an android build - maglrdr 1.1.
I am having sound and signal and robotic sound on the android rom so I want to flash a new radio viz.2.15.50....
I go into bootloader vol down - power etc. do the normal but then it hangs on the the second last screen ...............0% etc.
It doesnt do past this.
Please help
Click to expand...
Click to collapse
Do you still have 2.08.hspl installed? Go back to bootloader and check it.
http://forum.xda-developers.com/showthread.php?t=893948
I followed the instructions step by step with no problems. Made sure my radio was up to date, made sure to install HARDSPL 2.08. Downloaded the MAGLDR 1.13, and NAND Android ROM. Installed MAGLDR no problem, now on the bootloader screen with usb connected correctly and for some reason when I open the DAF file in the DFT_Android ROM and get to the third step it says this.
Error happen
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Someone help? What do I do?
synergeticink said:
http://forum.xda-developers.com/showthread.php?t=893948
I followed the instructions step by step with no problems. Made sure my radio was up to date, made sure to install HARDSPL 2.08. Downloaded the MAGLDR 1.13, and NAND Android ROM. Installed MAGLDR no problem, now on the bootloader screen with usb connected correctly and for some reason when I open the DAF file in the DFT_Android ROM and get to the third step it says this.
Error happen
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Someone help? What do I do?
Click to expand...
Click to collapse
Flash Clock Work Mod Recovery that is the right partition size for the ROM (check ROM thread for this) and then flash it via Clock Work Mod Recovery using the .zip file. Click on my giuide in my sig and look for the links to the guide you are using and the other guide I have linked at the top of the guide.
I did it and now it is saying "NAND Kernal open Failed". I even tried Magldr again and it did complete but I still says the same thing. I am stuck on that bootloader window. I need this phoe running by tomorrow. Can you help me?
Yes but I need detailed information as to what you have done and what ROM you are trying to flash. The more info you can give my about what you have done the better. When you say stuck in bootloader do you mean the multicolor screen? Also sorry for the lag in post my wife wanted to play Farmville aghhhh, lol.
http://forum.xda-developers.com/showthread.php?t=893948
I was following the instructions on this site to the T. I verified the Radio and I installed the HARDSPL 2.08.
I downloaded the stuff from XDA from the links on this forum:
ROM: DFT_Android
Bootloader: MAGLDR113
I followed the instructions and when I got to the time to open the DAF file in the ROM I did and got three clicks in and it said what I typed in my first post to this thread. Right now I am currently stuck when I turn the phone on it says NAND Open Failed and then goes to the eMADLDR Screen.
If you can help me and get it running by the end of the night that would be awesome!
If I put the phone in USB Mass Storage Mode and open the drive for the phone there is nothing in there.
Ok let me review the DFT ROM thread for a few minutes as I have never flashed the Original DFT ROM. Also now that you have MAGLDR on your HD2 you do not have a ROM this is why it will not do anything but boot into MAGLDR it is also why you are getting that error message. MAGLDR has nothing to boot right now. When you are in option #4 USB Mass Stg does your HD2 show up as MAGLDR in device manager in control panel of your computer?
What version of windows are you runnimg on your computer?
no.
Let me know what my options are whether it be find a way to do the nand or load from sd card.
What version of Windows does your computer use XP,Vista, or Windows 7?
win 7 is what use
synergeticink said:
win 7 is what use
Click to expand...
Click to collapse
Ok Your problem is that your computer is not recognizing your HD2 when connected to your computer this is why I asked if it said MSGLDR in device manager. You can try a couple of things to fix this. One just try all USB ports on your computer untill you see it says it is installing the drivers and it shows up as MAGLDR. Two you can open ActiveSynce or Windows Mobile Device Center and uncheck allow USB connections. Three go to device manager and click on your phone as it will show up there it just might say unknown or something, anyway click on it to make it drop down and then Right click on the drop down and select update drivers then select get from internet. If it does not find the drivers automaticly from the internet , browse and go to computer and then removable device and select for it to get drivers from it. When you have proper connection it will say MAGLDR for your HD2. Then you should be able to flash the ROM. Also make sure you right click on the DAf and select run as adminastrator when you flash the ROM.
Also if you just want to all you have to do to flash back to Windows Mobile is download the official ROM for your HD2 or a custom ROM and flash it via bootloader. Just make sure the white bar of bootloader says USB befor running the RUU. Make sure the ROM is for a T-Mobile HD2 thogh be it a official or custom.
Tried the last one and yes it now shows up at MAGLDR on my device manager. But when I go to the DAF I only get three clicks in again and it said this.
Error happen
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
synergeticink said:
Tried the last one and yes it now shows up at MAGLDR on my device manager. But when I go to the DAF I only get three clicks in again and it said this.
Error happen
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (346)
Click to expand...
Click to collapse
When you say three clicks are you talking about the clicks you have to make on the next button in the DFT Utility? Also just to make sure you are right clicking on the DAF and selecting run as administrator as you have to do this if you are running Vista or Windows 7. It is a must.
Yes and yes. I open the Rom to run and click "next" three times and then I get that message. I am also making sure that I opening under admin. At this point would it be best to do a manually copy the rom to the sd and open from there? I am not sure how to do it, I found video online on
http://www.jayceooi.com/2011/01/07/...-on-htc-hd2-with-clockworkmod-recovery-video/
The only problem I have with that is that the os looks like a really old version when I really want the sense or desire
synergeticink said:
Yes and yes. I open the Rom to run and click "next" three times and then I get that message. I am also making sure that I opening under admin. At this point would it be best to do a manually copy the rom to the sd and open from there? I am not sure how to do it, I found video online on
http://www.jayceooi.com/2011/01/07/...-on-htc-hd2-with-clockworkmod-recovery-video/
The only problem I have with that is that the os looks like a really old version when I really want the sense or desire
Click to expand...
Click to collapse
Well I am only looking at the first post in the thread for the DFT ROM and I do not see it say you can use Clock work recovery anywhere in that post. Which means it does not give a partition size for CWM. But it does not hurt to try it. Copy the .zip file the ROM comes in when you down load it to your computer to the root of your SD card. Root means it is not in any folder but just on your SD card. Then follow these instructions from my guide. Also download the v1.3 150MB from the CWM thread i linked it below.
Download the appropriate partition size recovery.zip file , check the first post by the ROM dev in the ROM thread for their suggested partition size. Go the CWM thread to download and see more instructions on how to install. Once you have the .zip file downloaded extract the contents of the zip file to the location and folder of your choosing. Next power on your HD2 but keep the power button pressed down to enter MAGLDR. Scroll down to option #5 USB flasher and connect it via USB cable to your computer. Give it a minute to install any drivers necessary and then right click on the DAF in the folder you extracted the files to and click on run as administrator. Let the progress bar on your computer and HD2 complete to 100% then click close on the last window of the installer. Your HD2 will automatically reboot it’s self but hold down the power button as it boots back up to bring up MAGLDR again. Scroll down to AD Recovery and press the send button and CWM will boot.
Once you have CWM flashed and booted up use the volume up and down just like in MAGLDR to scroll and go to install zip from sdcard and press the send button. Then go to choose zip from sdcard and press the send button. Then scroll through until you see your .zip file you just copied to your SD card and press the send button. then scroll to yes and press the send button and this should flash the ROM for you. I am only concerned about it not mentioning CWM in the DFT ROM thread, maybe Cotulla just has not updated it yet.
http://forum.xda-developers.com/showthread.php?t=898913
What about this link?
synergeticink said:
http://forum.xda-developers.com/showthread.php?t=898913
What about this link?
Click to expand...
Click to collapse
Yes that is Clock Work Mod Recovery, I linked it in my other post. You want to download the v1.3 150MB download for it.
This looks like a major pain, start again by flashing a WM6.5 rom. That way you are starting fresh.
You just need to go back to step 1 after flashing WM6.5, hard SPL already flashed, start at installing MagLdr...
Trying it right now. I will repost if it works. So far I am able to get Clock Work on my device, I am currently downloading the ROM.ZIP file to then mount to the root folder on my phone. I will post in the next 1hr to let you know.
ultramag69 said:
This looks like a major pain, start again by flashing a WM6.5 rom. That way you are starting fresh.
You just need to go back to step 1 after flashing WM6.5, hard SPL already flashed, start at installing MagLdr...
Click to expand...
Click to collapse
Why would they want to start all over again they have MAGLDR flashed. I personally think they just need to flash a different Android ROM as the DFT ROM has to be flashed by USB Flasher and installing with CWM is so much easier to me. But synergeticink wants this ROM so I am trying to help synergeticink get this ROM going. Starting over will only add two more steps here, one flash the Win Mo ROM, two reflashing MAGLDR, and maybe three if they already have CWM flashed as they would have to reflash it if they deside to go with another CWM compatible ROM. Which I am still not sure about if the DFT ROM is CWM compatible or not.
i just put on nand rom for the first time, and i want to re-do it with american android, but when i try running magldr 1.13, it says usb not connected and i cant get past this to flash american android, any answers for this plz, ty much, error :260:
can you give us pls some more input on what you are doing exactly? Where does it get stucked, when you boot it or do you select something from the menu and then the problem with no usb connected occurs?
well when i go into magldr and try to get it to go into usb flash, so i can flash american android, it opens and i check the boxes and click next, then it scans for the usb, but it wont bring up an error, and it tells me to make sure my usb is connected and it is connected already???? im a noob at this so i cant explain to much into what im doing wrong, im just going by the steps ive read, i have android on it and it works just great, but i want a dif rom, not the stock rom i found.
when you choose usb flasher do you see:usb flasher......usb
i think americandroid is using daf method.so right click on aca.exe and run as administror.
be sure you downloded mgldr version of it (not clk)
never mind, my mistake
when i try running magldr it says error and it wont run magldr, and usb is connected, but it says it isnt...?
plz can anyone tell me what im doing wrong??? im running magldr and my hd2 is connected, but when i check the boxes in magldr and click next it looks for my pda, then says error 260 and make sure cradle/cable is plugged into pc, and it is, and it wont go into magldr so i can click usb flash drive...???
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
mutil said:
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
Click to expand...
Click to collapse
ok last night i did my first nand on my nd2, i ran the hspl, then i ran the magldr 1.13, then i scrolled down to usb flasher, then i ran the rom that the youtube link gave me, http://www.youtube.com/watch?v=cvS4EvS0PAw then it all worked, i had android on my phone, but i dont want the rom in the youtube link, i want one from this forum american android, and i was wondering, when i go to run magldr on my nand android i flashed, it tells me error and that to check if my phone is connected, and im just trying to do what i did in the youtube video but with a dif rom, but it wont work from android, it did just fine on wm 6.5, and my phone is connected to the usb, but it tells me it isnt, but i can still transfer music and other things, but when i go to run magldr it tells me my phone isnt connected, so i cant get into magldr and scroll down to flash usb and use the rom i want to use from this site, better? plz help thanks much.
in order to go into mgldr menu power off the phone.then power on but hold down the power key until mgldr menu comes. its not necessary to reload mgldr for each rom.if you installed it to your phone now it is in it.
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
getting phone working...
_fly
have you used the the HD2 toolkit? You can find/download from here
http://forum.xda-developers.com/showthread.php?t=1090783
try wiping the phone with task29, then loading the MAGLDR or cLK / which ever nand/rom you want to use. Hopefully this works for you....
_fly said:
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
Click to expand...
Click to collapse
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
mutil said:
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
Click to expand...
Click to collapse
when i go into ad recovery it says no boot source???
Then you have to install cwm first.
I have had a similar problem with my phone and what worked for me was disconnecting the usb cable and plugging it back in. then it seen it as usb and i was able to flash the ROM. i know it seems rather simple but this small fix might work for you as it did for me.
if you can install cwm i would highly suggest to do that and also looking into the hd2 toolkit as someone else as already pointed out.
Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!
sofaford said:
Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!
Click to expand...
Click to collapse
Wrong forum, should be in the Q&A. You'd have thought it would be obvious, seeing as you're asking a QUESTION, but somehow people don't pick that up
Also, you really need to read more. There isn't any point in installing MAGLDR then Task29ing, in fact there is very little point in Task29ing at all unless you experience major problems with your phone. A simple data wipe (in CWM) and repartition has never failed me.
If you did a task 29 after doing the other steps first then you wiped everything back off. Install magldr again then CWM and then install your rom of choice.
Also for being a member since 2005 you should know not to EVER post a question in development.
Mods please move to Q&A
Sent from my Galaxy Nexus, T989, HD2, G2x or Touchpad.
moved
Sorry for posting it in the wrong forum.
Many thanks for the comments...I cannot install anything at present because once update process starts it times out at 0%. Task29 did not work either - it also gets stuck at 0%.
Only thing that works is Boot loader and USB mode.
As Boot loader is working I tried to install NAND Android following this instruction:
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
But DAF is giving this error back:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
thats all old instructuions.
go get the nand toolkit, and also get hspl3
...
phone into bootloader (tri colour screen, not magldr)
connect usb
run hspl3
choose 2.08.hspl (don't assume its already 2.08.hspl, check it, hanging at 0% is often a sign of no hspl)
when reboots immediately go back into bootloader
*(* from here on you can do all this in the nand toolkit*)*
flash magldr
when it reboots enter magldr
(if phone hangs on a htc screen and doesn't show magldr, you need to flash radio 2.15.50)
phone into magldr
connect usb
choose 'usb flasher'
in toolkit select desired system partition size and cache size
when its finished
phone back into magldr
choose 'ad nand'
this starts cwm
(if you havent yet partitioned your sd card with an ext partitio, look ity up and do it now)
select 'install zip from sd'
select zip from sd
browse to where you dropped the rom.zip file onto your sd card.
when it reboots you're done, , alternatively it failed somewhere, , which step?
if you get apparent driver errors, theres a nice big button called drivers in the toolkit (i think?)
Many thanks that worked like clockwork
Hey, i've been using Android NAND roms for a while and decided to try WP7.
But everytime i attempt to install an WP7 rom i recieve this error:
(The installation starts fine, but freezes during partition 1. Partition 0 is OK)
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (1283)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (1091)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I have tried this:
- Switch USB Ports & Cable
- Task29, two times. Reinstalling MAGLDR 1.13, Radio, HSPL 2.08.
- Format SDcard with FAT32. & Remove SD-Card
- ActiveSync Setting "Allow usb-connections" is disabled.
- Run DWI.exe as administrator.
- Use last 24mb (Not sure if i really enabled it, because everytime i attempt to
it sends me straight back to "startmenu" of MAGLDR.)
Could anyone please point out, what i am doing wrong & what i could try?
in magldr set this settings:
* 10. Services, 4. UseLast24NAND
* 10. Services, 5. ClearSD MDR
* go to 5. USB Flasher and run DWI.exe to flash ROM
also look this tutorial
http://forum.xda-developers.com/attachment.php?attachmentid=954899&d=1332181049
I did already attempt this, but are you supposed to
get any indication back when you enable the last 24mb?
just press green key to confirm and automatically get back to main menu
how about trying this..
after Magldr, in HD2 toolkit, click magldr partition 300/ 45 & see what happens. this method worked for me after a few of those errors
dont forget in Service
- clear SD MBR
- uselast24nand
I don't know what happened, but i followed that toturial after i installed Winmo 6.5.
The installation is going perfectly fine now, thanks
Try to do these steps in this exact order:
*make sure you double check yourself.
1) Go into Boot loader (tri-color screen).
2) Do Task-29.
2a) Install HSPL 2.08 and make sure you have 2.15 radio or another radio compatible with MAGLDR.
3) Flash Windows mobile Rom and restart and let it boot up fully.
4) After you have booted into Windows mobile, Go back into boot loader (tri-colored screen) (reboot or turn it completely off it doesn't matter).
5) Flash Magldr v1.13. (Do not task-29 before or after installing Magldr!!)
6) Enable the last 24 Mb in settings of Magldr.
7) Flash Windows Phone with USB flasher from Magldr Menu.
8) Enjoy Your Windows Phone!
The reason it gives you that error is because you either came from Android on NAND, you used task-29 before or after you flashed Magldr, or you did not enable last 24 mb.
It's needed to install Windows Mobile before WP7?
Yes, unless you already have Windows Mobile on your device before installing wp7, then you dont have to.
All I recommend is to hard reset then boot into windows mobile and then restart into boot loader and install Magldr and then continue from there.
But if you have Android on Nand then you have to or else it will give the error the OP received.
so which version of WinMo should I use? any fast link here would be? thank you
Any version would work. I have an Omega rom just on my computer, but my connection is slow so I'll give you the source:
Make sure you download a rom specifically for your phone. Ex. Tmobile Hd2 needs Tmobile Hd2 rom.
HD20 ROM post 2: http://forum.xda-developers.com/showthread.php?t=576215
OMEGA ROM post 1: http://forum.xda-developers.com/showthread.php?t=692763
Just download one, task-29 your phone, then install the rom you downloaded through USB. Then continue with step 2a of my earlier post.
---------- Post added at 05:19 PM ---------- Previous post was at 05:18 PM ----------
Sorry Double post...
AzzurPL said:
so which version of WinMo should I use? any fast link here would be? thank you
Click to expand...
Click to collapse
You can go to the HTC website and download one that,s suited to your region/country and language.